1. 26 Jul, 2013 27 commits
  2. 24 Jul, 2013 13 commits
    • Hendrik Brueckner's avatar
      tty/hvc_iucv: Disconnect IUCV connection when lowering DTR · 74b3b4cd
      Hendrik Brueckner authored
      Implement the dtr_rts() hvc console callback to improve control when to
      disconnect the IUCV connection.  Previously, the IUCV connection was
      disconnected during the notifier_del() callback, i.e., when the last file
      descriptor to the hvc terminal device was closed.
      
      Recent changes in login programs caused undesired disconnects during the
      login phase.  To prevent these kind of disconnects, implement the dtr_rts
      callback to implicitly handle the HUPCL termios control via the hvc_console
      driver.
      Signed-off-by: default avatarHendrik Brueckner <brueckner@linux.vnet.ibm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      74b3b4cd
    • Hendrik Brueckner's avatar
      tty/hvc_console: Add DTR/RTS callback to handle HUPCL control · 33e745a1
      Hendrik Brueckner authored
      Introduce a new callback to explicitly handle the HUPCL termios control flag.
      This prepares for a follow-up commit for the hvc_iucv device driver to
      improve handling when to drop an established network connection.
      
      The callback naming is based on the recently added tty_port interface to
      facilitate a potential refactoring of the hvc_console to use tty_port
      functions.
      Signed-off-by: default avatarHendrik Brueckner <brueckner@linux.vnet.ibm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      33e745a1
    • Wolfram Sang's avatar
      drivers/tty/serial: don't use devm_pinctrl_get_select_default() in probe · e84f54fc
      Wolfram Sang authored
      Since commit ab78029e (drivers/pinctrl: grab default handles from device core),
      we can rely on device core for setting the default pins. Compile tested only.
      
      Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e84f54fc
    • Aldo Iljazi's avatar
      Drivers: tty: n_gsm.c: fixed 7 errors & 6 warnings that checkpatch complained · f3c909b4
      Aldo Iljazi authored
      Specifically:
      n_gsm.c:810: ERROR: space required before the open parenthesis '('
      n_gsm.c:830: WARNING: line over 80 characters
      n_gsm.c:971: ERROR: trailing whitespace
      n_gsm.c:984: ERROR: code indent should use tabs where possible
      n_gsm.c:984: WARNING: please, no space before tabs
      n_gsm.c:984: WARNING: please, no spaces at the start of a line
      n_gsm.c:1141: WARNING: space prohibited before semicolon
      n_gsm.c:1743: ERROR: space required before the open brace '{'
      n_gsm.c:1744: WARNING: line over 80 characters
      n_gsm.c:1745: ERROR: code indent should use tabs where possible
      n_gsm.c:1746: ERROR: code indent should use tabs where possible
      n_gsm.c:2908: WARNING: line over 80 characters
      n_gsm.c:2912: ERROR: trailing whitespace
      Signed-off-by: default avatarAldo Iljazi <neonsync1@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f3c909b4
    • Peter Hurley's avatar
      tty: Fix lock order in tty_do_resize() · dee4a0be
      Peter Hurley authored
      Commits 6a1c0680 and
      9356b535, respectively
        'tty: Convert termios_mutex to termios_rwsem' and
        'n_tty: Access termios values safely'
      introduced a circular lock dependency with console_lock and
      termios_rwsem.
      
      The lockdep report [1] shows that n_tty_write() will attempt
      to claim console_lock while holding the termios_rwsem, whereas
      tty_do_resize() may already hold the console_lock while
      claiming the termios_rwsem.
      
      Since n_tty_write() and tty_do_resize() do not contend
      over the same data -- the tty->winsize structure -- correct
      the lock dependency by introducing a new lock which
      specifically serializes access to tty->winsize only.
      
      [1] Lockdep report
      
      ======================================================
      [ INFO: possible circular locking dependency detected ]
      3.10.0-0+tip-xeon+lockdep #0+tip Not tainted
      -------------------------------------------------------
      modprobe/277 is trying to acquire lock:
       (&tty->termios_rwsem){++++..}, at: [<ffffffff81452656>] tty_do_resize+0x36/0xe0
      
      but task is already holding lock:
       ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0
      
      which lock already depends on the new lock.
      
      the existing dependency chain (in reverse order) is:
      
      -> #2 ((fb_notifier_list).rwsem){.+.+.+}:
             [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0
             [<ffffffff8175b797>] down_read+0x47/0x5c
             [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0
             [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20
             [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20
             [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320
             [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper]
             [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau]
             [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau]
             [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm]
             [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau]
             [<ffffffff813b13db>] local_pci_probe+0x4b/0x80
             [<ffffffff813b1701>] pci_device_probe+0x111/0x120
             [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0
             [<ffffffff81497bab>] __driver_attach+0xab/0xb0
             [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0
             [<ffffffff814971fe>] driver_attach+0x1e/0x20
             [<ffffffff81496cc1>] bus_add_driver+0x111/0x290
             [<ffffffff814982b7>] driver_register+0x77/0x170
             [<ffffffff813b0454>] __pci_register_driver+0x64/0x70
             [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm]
             [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau]
             [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
             [<ffffffff810c54cb>] load_module+0x123b/0x1bf0
             [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120
             [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b
      
      -> #1 (console_lock){+.+.+.}:
             [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0
             [<ffffffff810430a7>] console_lock+0x77/0x80
             [<ffffffff8146b2a1>] con_flush_chars+0x31/0x50
             [<ffffffff8145780c>] n_tty_write+0x1ec/0x4d0
             [<ffffffff814541b9>] tty_write+0x159/0x2e0
             [<ffffffff814543f5>] redirected_tty_write+0xb5/0xc0
             [<ffffffff811ab9d5>] vfs_write+0xc5/0x1f0
             [<ffffffff811abec5>] SyS_write+0x55/0xa0
             [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b
      
      -> #0 (&tty->termios_rwsem){++++..}:
             [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30
             [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0
             [<ffffffff8175b724>] down_write+0x44/0x70
             [<ffffffff81452656>] tty_do_resize+0x36/0xe0
             [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0
             [<ffffffff8146c99f>] vc_resize+0x1f/0x30
             [<ffffffff813e4535>] fbcon_init+0x385/0x5a0
             [<ffffffff8146a4bc>] visual_init+0xbc/0x120
             [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320
             [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70
             [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0
             [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820
             [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110
             [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0
             [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20
             [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20
             [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320
             [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper]
             [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau]
             [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau]
             [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm]
             [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau]
             [<ffffffff813b13db>] local_pci_probe+0x4b/0x80
             [<ffffffff813b1701>] pci_device_probe+0x111/0x120
             [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0
             [<ffffffff81497bab>] __driver_attach+0xab/0xb0
             [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0
             [<ffffffff814971fe>] driver_attach+0x1e/0x20
             [<ffffffff81496cc1>] bus_add_driver+0x111/0x290
             [<ffffffff814982b7>] driver_register+0x77/0x170
             [<ffffffff813b0454>] __pci_register_driver+0x64/0x70
             [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm]
             [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau]
             [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
             [<ffffffff810c54cb>] load_module+0x123b/0x1bf0
             [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120
             [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b
      
      other info that might help us debug this:
      
      Chain exists of:
        &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem
      
       Possible unsafe locking scenario:
      
             CPU0                    CPU1
             ----                    ----
        lock((fb_notifier_list).rwsem);
                                     lock(console_lock);
                                     lock((fb_notifier_list).rwsem);
        lock(&tty->termios_rwsem);
      
       *** DEADLOCK ***
      
      7 locks held by modprobe/277:
       #0:  (&__lockdep_no_validate__){......}, at: [<ffffffff81497b5b>] __driver_attach+0x5b/0xb0
       #1:  (&__lockdep_no_validate__){......}, at: [<ffffffff81497b69>] __driver_attach+0x69/0xb0
       #2:  (drm_global_mutex){+.+.+.}, at: [<ffffffffa008a6dd>] drm_get_pci_dev+0xbd/0x2a0 [drm]
       #3:  (registration_lock){+.+.+.}, at: [<ffffffff813d93f5>] register_framebuffer+0x25/0x320
       #4:  (&fb_info->lock){+.+.+.}, at: [<ffffffff813d8116>] lock_fb_info+0x26/0x60
       #5:  (console_lock){+.+.+.}, at: [<ffffffff813d95a4>] register_framebuffer+0x1d4/0x320
       #6:  ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0
      
      stack backtrace:
      CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip
      Hardware name: Dell Inc. Precision WorkStation T5400  /0RW203, BIOS A11 04/30/2012
       ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8
       ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8
       ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007
      Call Trace:
       [<ffffffff81755f19>] dump_stack+0x19/0x1b
       [<ffffffff8174f506>] print_circular_bug+0x1fb/0x20c
       [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30
       [<ffffffff810b775e>] ? mark_held_locks+0xae/0x120
       [<ffffffff810b78d5>] ? trace_hardirqs_on_caller+0x105/0x1d0
       [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0
       [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0
       [<ffffffff8175b724>] down_write+0x44/0x70
       [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0
       [<ffffffff81452656>] tty_do_resize+0x36/0xe0
       [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0
       [<ffffffff8146c99f>] vc_resize+0x1f/0x30
       [<ffffffff813e4535>] fbcon_init+0x385/0x5a0
       [<ffffffff8146a4bc>] visual_init+0xbc/0x120
       [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320
       [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70
       [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0
       [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820
       [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110
       [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0
       [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20
       [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20
       [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320
       [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper]
       [<ffffffff8173cbcb>] ? kmemleak_alloc+0x5b/0xc0
       [<ffffffff81198874>] ? kmem_cache_alloc_trace+0x104/0x290
       [<ffffffffa01035e1>] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper]
       [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau]
       [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau]
       [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm]
       [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau]
       [<ffffffff8175f162>] ? _raw_spin_unlock_irqrestore+0x42/0x80
       [<ffffffff813b13db>] local_pci_probe+0x4b/0x80
       [<ffffffff813b1701>] pci_device_probe+0x111/0x120
       [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0
       [<ffffffff81497bab>] __driver_attach+0xab/0xb0
       [<ffffffff81497b00>] ? driver_probe_device+0x3a0/0x3a0
       [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0
       [<ffffffff814971fe>] driver_attach+0x1e/0x20
       [<ffffffff81496cc1>] bus_add_driver+0x111/0x290
       [<ffffffffa022a000>] ? 0xffffffffa0229fff
       [<ffffffff814982b7>] driver_register+0x77/0x170
       [<ffffffffa022a000>] ? 0xffffffffa0229fff
       [<ffffffff813b0454>] __pci_register_driver+0x64/0x70
       [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm]
       [<ffffffffa022a000>] ? 0xffffffffa0229fff
       [<ffffffffa022a000>] ? 0xffffffffa0229fff
       [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau]
       [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
       [<ffffffff810c54cb>] load_module+0x123b/0x1bf0
       [<ffffffff81399a50>] ? ddebug_proc_open+0xb0/0xb0
       [<ffffffff813855ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f
       [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120
       [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      dee4a0be
    • Peter Hurley's avatar
      tty: Remove extra wakeup from pty write() path · 5ede5253
      Peter Hurley authored
      Acquiring the write_wait queue spin lock now accounts for the largest
      slice of cpu time on the tty write path. Two factors contribute to
      this situation; a overly-pessimistic line discipline write loop which
      _always_ sets up a wait loop even if i/o will immediately succeed, and
      on ptys, a wakeup storm from reads and writes.
      
      Writer wakeup does not need to be performed by the pty driver.
      Firstly, since the actual i/o is performed within the write, the
      line discipline write loop will continue while space remains in
      the flip buffers. Secondly, when space becomes avail in the
      line discipline receive buffer (and thus also in the flip buffers),
      the pty unthrottle re-wakes the writer (non-flow-controlled line
      disciplines unconditionally unthrottle the driver when data is
      received). Thus, existing in-kernel i/o is guaranteed to advance.
      Finally, writer wakeup occurs at the conclusion of the line discipline
      write (in tty_write_unlock()). This guarantees that any user-space write
      waiters are woken to continue additional i/o.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5ede5253
    • Peter Hurley's avatar
      n_tty: Factor LNEXT processing from per-char i/o path · e60d27c4
      Peter Hurley authored
      LNEXT processing accounts for ~15% of total cpu time in end-to-end
      tty i/o; factor the lnext test/clear from the per-char i/o path.
      
      Instead, attempt to immediately handle the literal next char if not
      at the end of this received buffer; otherwise, handle the first char
      of the next received buffer as the literal next char, then continue
      with normal i/o.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e60d27c4
    • Peter Hurley's avatar
      n_tty: Un-inline single-use functions · 4b293492
      Peter Hurley authored
      gcc will likely inline these single-use functions anyway; remove
      inline modifier.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4b293492
    • Peter Hurley's avatar
      n_tty: Remove overflow tests from receive_buf() path · 19e2ad6a
      Peter Hurley authored
      Always pre-figure the space available in the read_buf and limit
      the inbound receive request to that amount.
      
      For compatibility reasons with the non-flow-controlled interface,
      n_tty_receive_buf() will continue filling read_buf until all data
      has been received or receive_room() returns 0.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      19e2ad6a
    • Peter Hurley's avatar
      n_tty: Factor PARMRK from normal per-char i/o · 7de971b0
      Peter Hurley authored
      Handle PARMRK processing on the slow per-char i/o path.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7de971b0
    • Peter Hurley's avatar
      n_tty: Factor ISTRIP and IUCLC receive_buf into separate fn · 6baad008
      Peter Hurley authored
      Convert to modal receive_buf processing; factor char receive
      processing for unusual termios settings out of normal per-char
      i/o path.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6baad008
    • Peter Hurley's avatar
      n_tty: Split n_tty_receive_char() · 4b1f79c2
      Peter Hurley authored
      Factor 'special' per-char processing into standalone fn,
      n_tty_receive_char_special(), which handles processing for chars
      marked in the char_map.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4b1f79c2
    • Peter Hurley's avatar
      n_tty: Eliminate char tests from IXANY restart test · 855df3c0
      Peter Hurley authored
      Relocate the IXANY restart tty test to code paths where the
      the received char is not START_CHAR, STOP_CHAR, INTR_CHAR,
      QUIT_CHAR or SUSP_CHAR.
      
      Fixes the condition when ISIG if off and one of INTR_CHAR,
      QUIT_CHAR or SUSP_CHAR does not restart i/o.
      Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      855df3c0