- 01 Nov, 2016 16 commits
-
-
Ville Syrjälä authored
Unify our approach to things by passing around dev_priv instead of dev. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
For legacy contexts we employ an optimisation to only flush the context when binding into the global GTT. This avoids stalling on the GPU when reloading an active context. Wrap this detail up into a helper and export it for a potential third user. (Longer term, context pinning needs to be reworked as the current handling of switch context pins too late and so risks eviction and corrupting the request. Plans, plans, plans.) v2: Expand the comment explaining the optimisation for avoiding the stall on active contexts. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20161030132820.32163-1-chris@chris-wilson.co.ukReviewed-by: Matthew Auld <matthew.auld@intel.com>
-
Maarten Lankhorst authored
There's no need to keep a duplicate skl_pipe_wm around any more, everything can be discovered from crtc_state, which we pass around correctly now even in case of plane disable. The copy in intel_crtc->wm.skl.active is equal to crtc_state->wm.skl.optimal after the atomic commit completes. It's useful for two-step watermark programming, but not required for gen9+ which does it in a single step. We can pull the old allocation from old_crtc_state. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-9-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: Matt Roper <matthew.d.roper@intel.com>
-
Maarten Lankhorst authored
Move calculating minimum allocations to a helper, which cleans up the code some more. The cursor is still allocated in advance because it doesn't count towards data rate and should always be reserved. changes since v1: - Change comment to have a extra opening line. (Matt) - Rebase to remove unused plane->pipe == pipe, handled by the iterator now. (Paulo) Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-7-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
-
Maarten Lankhorst authored
This is not required any more now that we get fresh state from drm_atomic_crtc_state_for_each_plane_state. Zero all state in advance. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-6-git-send-email-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
It's only used in one function, and can be calculated without caching it in the global struct by using drm_atomic_crtc_state_for_each_plane_state. There are loops over all planes, including planes that don't exist. This is harmless, because data_rate will always be 0 for them and we never program them when updating watermarks. Changes since v1: - Rename rate back to data_rate, and change array name to plane_data_rate. (Matt) - Remove whitespace. (Paulo) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-5-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
-
Maarten Lankhorst authored
Using for_each_intel_plane_on_crtc will allow us to find all allocations that may have changed, not just the one added by the atomic state. This will print changes to plane allocations for crtc's when some planes are not added to the atomic state. Changes since v1: - Rephrase commit message. (Ville) - Use plane->base.id and plane->name to kill off cursor special case. (Ville) - Add intel_crtc to prevent a line wrap. (Paulo) - Line wrap debug messages. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/c9f7dc1a-d23a-7c16-b2b7-1c23dd07ed35@linux.intel.comReviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
-
Maarten Lankhorst authored
I'm planning on getting rid of all obj->state dereferences, and replace thhem with accessor functions. Remove this one early, they're equivalent because removed planes are already part of the state, else they could not have been removed. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-3-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: Matt Roper <matthew.d.roper@intel.com>
-
Maarten Lankhorst authored
Caching is not required, drm_atomic_crtc_state_for_each_plane_state can be used to inspect the states of all planes assigned to the CRTC even if they are not part of _state, so we can just recalculate every time. Changes since v1: - Remove plane->pipe checks, they're implied by the macros. - Split unrelated changes to a separate commit. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
-
Chris Wilson authored
The shrinker may appear to recurse into obj->mm.lock as the shrinker may be called from a direct reclaim path whilst handling get_pages. We filter out recursing on the same obj->mm.lock by inspecting obj->mm.pages, but we do want to take the lock on a second object in order to reap their pages. lockdep spots the recursion on the same lockclass and needs annotation to avoid a false positive. To keep the two paths distinct, create an enum to indicate which subclass of obj->mm.lock we are using. This removes the false positive and avoids masking real bugs. Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101121134.27504-1-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
With full-ppgtt one of the main bottlenecks is the lookup of the VMA underneath the object. For execbuf there is merit in having a very fast direct lookup of ctx:handle to the vma using a hashtree, but that still leaves a large number of other lookups. One way to speed up the lookup would be to use a rhashtable, but that requires extra allocations and may exhibit poor worse case behaviour. An alternative is to use an embedded rbtree, i.e. no extra allocations and deterministic behaviour, but at the slight cost of O(lgN) lookups (instead of O(1) for rhashtable). The major of such tree will be very shallow and so not much slower, and still scales much, much better than the current unsorted list. v2: Bump vma_compare() to return a long, as we return the result of comparing two pointers. References: https://bugs.freedesktop.org/show_bug.cgi?id=87726Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101115400.15647-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we have a tiled object and an unknown CPU swizzle pattern, we pin the pages to prevent the object from being swapped out (and us corrupting the contents as we do not know the access pattern and so cannot convert it to linear and back to tiled on reuse). This requires us to remember to drop the extra pinning when freeing the object, or else we trigger warnings about the pin leak. In commit fbbd37b3 ("drm/i915: Move object release to a freelist + worker"), the object free path was deferred to a worker, but the unpinning of the quirk, along with marking the object as reclaimable, was left on the immediate path (so that if required we could reclaim the pages under memory pressure as early as possible). However, this split introduced a bug where the pages were no longer being unpinned if they were marked as unneeded. [ 231.800401] WARNING: CPU: 1 PID: 90 at drivers/gpu/drm/i915/i915_gem.c:4275 __i915_gem_free_objects+0x326/0x3c0 [i915] [ 231.800403] WARN_ON(i915_gem_object_has_pinned_pages(obj)) [ 231.800405] Modules linked in: [ 231.800406] snd_hda_intel i915 snd_hda_codec_generic mei_me snd_hda_codec coretemp snd_hwdep mei lpc_ich snd_hda_core snd_pcm e1000e ptp pps_core [last unloaded: i915] [ 231.800426] CPU: 1 PID: 90 Comm: kworker/1:4 Tainted: G U 4.9.0-rc2-CI-CI_DRM_1780+ #1 [ 231.800428] Hardware name: LENOVO 7465CTO/7465CTO, BIOS 6DET44WW (2.08 ) 04/22/2009 [ 231.800456] Workqueue: events __i915_gem_free_work [i915] [ 231.800459] ffffc9000034fc80 ffffffff8142dd65 ffffc9000034fcd0 0000000000000000 [ 231.800465] ffffc9000034fcc0 ffffffff8107e4e6 000010b300000001 0000000000001000 [ 231.800469] ffff88011d3db740 ffff880130ef0000 0000000000000000 ffff880130ef5ea0 [ 231.800474] Call Trace: [ 231.800479] [<ffffffff8142dd65>] dump_stack+0x67/0x92 [ 231.800484] [<ffffffff8107e4e6>] __warn+0xc6/0xe0 [ 231.800487] [<ffffffff8107e54a>] warn_slowpath_fmt+0x4a/0x50 [ 231.800491] [<ffffffff811d12ac>] ? kmem_cache_free+0x2dc/0x340 [ 231.800520] [<ffffffffa009ef36>] __i915_gem_free_objects+0x326/0x3c0 [i915] [ 231.800548] [<ffffffffa009effe>] __i915_gem_free_work+0x2e/0x50 [i915] [ 231.800552] [<ffffffff8109c27c>] process_one_work+0x1ec/0x6b0 [ 231.800555] [<ffffffff8109c1f6>] ? process_one_work+0x166/0x6b0 [ 231.800558] [<ffffffff8109c789>] worker_thread+0x49/0x490 [ 231.800561] [<ffffffff8109c740>] ? process_one_work+0x6b0/0x6b0 [ 231.800563] [<ffffffff8109c740>] ? process_one_work+0x6b0/0x6b0 [ 231.800566] [<ffffffff810a2aab>] kthread+0xeb/0x110 [ 231.800569] [<ffffffff810a29c0>] ? kthread_park+0x60/0x60 [ 231.800573] [<ffffffff818164a7>] ret_from_fork+0x27/0x40 Moving to a separate flag for tracking the quirked pin is overkill for the bug (since we only have to interchange the two tests in i915_gem_free_object) but it does reduce a complicated test on all objects and provide a sanitycheck for uncommon code paths. Fixes: fbbd37b3 ("drm/i915: Move object release to a freelist + worker") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101100317.11129-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Whilst waiting on a request, we may do so without holding any locks or any guards beyond a reference to the request. In order to avoid taking locks within request deallocation, we drop references to its timeline (via the context and ppgtt) upon retirement. We should avoid chasing such pointers outside of their control, in particular we inspect the request->timeline to see if we may restore the RPS waitboost for a client. If we instead look at the engine->timeline, we will have similar behaviour on both full-ppgtt and !full-ppgtt systems and reduce the amount of reward we give towards stalling clients (i.e. only if the client stalls and the GPU is uncontended does it reclaim its boost). This restores behaviour back to pre-timelines, whilst fixing: [ 645.078485] BUG: KASAN: use-after-free in i915_gem_object_wait_fence+0x1ee/0x2e0 at addr ffff8802335643a0 [ 645.078577] Read of size 4 by task gem_exec_schedu/28408 [ 645.078638] CPU: 1 PID: 28408 Comm: gem_exec_schedu Not tainted 4.9.0-rc2+ #64 [ 645.078724] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 645.078816] ffff88022daef9a0 ffffffff8143d059 ffff880235402a80 ffff880233564200 [ 645.078998] ffff88022daef9c8 ffffffff81229c5c ffff88022daefa48 ffff880233564200 [ 645.079172] ffff880235402a80 ffff88022daefa38 ffffffff81229ef0 000000008110a796 [ 645.079345] Call Trace: [ 645.079404] [<ffffffff8143d059>] dump_stack+0x68/0x9f [ 645.079467] [<ffffffff81229c5c>] kasan_object_err+0x1c/0x70 [ 645.079534] [<ffffffff81229ef0>] kasan_report_error+0x1f0/0x4b0 [ 645.079601] [<ffffffff8122a244>] kasan_report+0x34/0x40 [ 645.079676] [<ffffffff81634f5e>] ? i915_gem_object_wait_fence+0x1ee/0x2e0 [ 645.079741] [<ffffffff81229951>] __asan_load4+0x61/0x80 [ 645.079807] [<ffffffff81634f5e>] i915_gem_object_wait_fence+0x1ee/0x2e0 [ 645.079876] [<ffffffff816364bf>] i915_gem_object_wait+0x19f/0x590 [ 645.079944] [<ffffffff81636320>] ? i915_gem_object_wait_priority+0x500/0x500 [ 645.080016] [<ffffffff8110fb30>] ? debug_show_all_locks+0x1e0/0x1e0 [ 645.080084] [<ffffffff8110abdc>] ? check_chain_key+0x14c/0x210 [ 645.080157] [<ffffffff8110a796>] ? __lock_is_held+0x46/0xc0 [ 645.080226] [<ffffffff8163bc61>] ? i915_gem_set_domain_ioctl+0x141/0x690 [ 645.080296] [<ffffffff8163bcc2>] i915_gem_set_domain_ioctl+0x1a2/0x690 [ 645.080366] [<ffffffff811f8f85>] ? __might_fault+0x75/0xe0 [ 645.080433] [<ffffffff815a55f7>] drm_ioctl+0x327/0x640 [ 645.080508] [<ffffffff8163bb20>] ? i915_gem_obj_prepare_shmem_write+0x3a0/0x3a0 [ 645.080603] [<ffffffff815a52d0>] ? drm_ioctl_permit+0x120/0x120 [ 645.080670] [<ffffffff8110abdc>] ? check_chain_key+0x14c/0x210 [ 645.080738] [<ffffffff81275717>] do_vfs_ioctl+0x127/0xa20 [ 645.080804] [<ffffffff8120268c>] ? do_mmap+0x47c/0x580 [ 645.080871] [<ffffffff811da567>] ? vm_mmap_pgoff+0x117/0x140 [ 645.080938] [<ffffffff812755f0>] ? ioctl_preallocate+0x150/0x150 [ 645.081011] [<ffffffff81108c53>] ? up_write+0x23/0x50 [ 645.081078] [<ffffffff811da567>] ? vm_mmap_pgoff+0x117/0x140 [ 645.081145] [<ffffffff811da450>] ? vma_is_stack_for_current+0x90/0x90 [ 645.081214] [<ffffffff8110d853>] ? mark_held_locks+0x23/0xc0 [ 645.082030] [<ffffffff81288408>] ? __fget+0x168/0x250 [ 645.082106] [<ffffffff819ad517>] ? entry_SYSCALL_64_fastpath+0x5/0xb1 [ 645.082176] [<ffffffff81288592>] ? __fget_light+0xa2/0xc0 [ 645.082242] [<ffffffff8127604c>] SyS_ioctl+0x3c/0x70 [ 645.082309] [<ffffffff819ad52e>] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 645.082374] Object at ffff880233564200, in cache kmalloc-8192 size: 8192 [ 645.082431] Allocated: [ 645.082480] PID = 28408 [ 645.082535] [ 645.082566] [<ffffffff8103ae66>] save_stack_trace+0x16/0x20 [ 645.082623] [ 645.082656] [<ffffffff81228b06>] save_stack+0x46/0xd0 [ 645.082716] [ 645.082756] [<ffffffff812292fd>] kasan_kmalloc+0xad/0xe0 [ 645.082817] [ 645.082848] [<ffffffff81631752>] i915_ppgtt_create+0x52/0x220 [ 645.082908] [ 645.082941] [<ffffffff8161db96>] i915_gem_create_context+0x396/0x560 [ 645.083027] [ 645.083059] [<ffffffff8161f857>] i915_gem_context_create_ioctl+0x97/0xf0 [ 645.083152] [ 645.083183] [<ffffffff815a55f7>] drm_ioctl+0x327/0x640 [ 645.083243] [ 645.083274] [<ffffffff81275717>] do_vfs_ioctl+0x127/0xa20 [ 645.083334] [ 645.083372] [<ffffffff8127604c>] SyS_ioctl+0x3c/0x70 [ 645.083432] [ 645.083464] [<ffffffff819ad52e>] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 645.083551] Freed: [ 645.083599] PID = 27629 [ 645.083648] [ 645.083676] [<ffffffff8103ae66>] save_stack_trace+0x16/0x20 [ 645.083738] [ 645.083770] [<ffffffff81228b06>] save_stack+0x46/0xd0 [ 645.083830] [ 645.083862] [<ffffffff81229203>] kasan_slab_free+0x73/0xc0 [ 645.083922] [ 645.083961] [<ffffffff812279c9>] kfree+0xa9/0x170 [ 645.084021] [ 645.084053] [<ffffffff81629f60>] i915_ppgtt_release+0x100/0x180 [ 645.084139] [ 645.084171] [<ffffffff8161d414>] i915_gem_context_free+0x1b4/0x230 [ 645.084257] [ 645.084288] [<ffffffff816537b2>] intel_lr_context_unpin+0x192/0x230 [ 645.084380] [ 645.084413] [<ffffffff81645250>] i915_gem_request_retire+0x620/0x630 [ 645.084500] [ 645.085226] [<ffffffff816473d1>] i915_gem_retire_requests+0x181/0x280 [ 645.085313] [ 645.085352] [<ffffffff816352ba>] i915_gem_retire_work_handler+0xca/0xe0 [ 645.085440] [ 645.085471] [<ffffffff810c725b>] process_one_work+0x4fb/0x920 [ 645.085532] [ 645.085562] [<ffffffff810c770d>] worker_thread+0x8d/0x840 [ 645.085622] [ 645.085653] [<ffffffff810d21e5>] kthread+0x185/0x1b0 [ 645.085718] [ 645.085750] [<ffffffff819ad7a7>] ret_from_fork+0x27/0x40 [ 645.085811] Memory state around the buggy address: [ 645.085869] ffff880233564280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 645.085956] ffff880233564300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 645.086053] >ffff880233564380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 645.086138] ^ [ 645.086193] ffff880233564400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 645.086283] ffff880233564480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb v2: Add a comment to document the hint like nature of intel_engine_last_submit() Fixes: 73cb9701 ("drm/i915: Combine seqno + tracking into a global timeline struct") Fixes: 80b204bc ("drm/i915: Enable multiple timelines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101100317.11129-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
During shrinking, we walk over the list of objects searching for victims. Any that are not removed are put back into the global list. Currently, they are put back in order (at the front) which means they will be first to be scanned again. If we instead move them to the rear of the list, we will scan new potential victims on the next pass and waste less time rescanning unshrinkable objects. Normally the lists are kept in rough order to shrinking (with object least frequently used at the start), by moving just scanned objects to the rear we are acknowledging that they are still in use. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
In the shrinker, we can safely remove an empty object (obj->mm.pages == NULL) after having discarded the pages because we are holding the struct_mutex. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
To flush all call_rcu() tasks (here from i915_gem_free_object()) we need to call rcu_barrier() (not synchronize_rcu()). If we don't then we may still have objects being freed as we continue to teardown the driver - in particular, the recently released rings may race with the memory manager shutdown resulting in sporadic: [ 142.217186] WARNING: CPU: 7 PID: 6185 at drivers/gpu/drm/drm_mm.c:932 drm_mm_takedown+0x2e/0x40 [ 142.217187] Memory manager not clean during takedown. [ 142.217187] Modules linked in: i915(-) x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich snd_hda_codec_realtek snd_hda_codec_generic mei_me mei snd_hda_codec_hdmi snd_hda_codec snd_hwdep snd_hda_core snd_pcm e1000e ptp pps_core [last unloaded: snd_hda_intel] [ 142.217199] CPU: 7 PID: 6185 Comm: rmmod Not tainted 4.9.0-rc2-CI-Trybot_242+ #1 [ 142.217199] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS FBKT34AUS 04/24/2013 [ 142.217200] ffffc90002ecfce0 ffffffff8142dd65 ffffc90002ecfd30 0000000000000000 [ 142.217202] ffffc90002ecfd20 ffffffff8107e4e6 000003a40778c2a8 ffff880401355c48 [ 142.217204] ffff88040778c2a8 ffffffffa040f3c0 ffffffffa040f4a0 00005621fbf8b1f0 [ 142.217206] Call Trace: [ 142.217209] [<ffffffff8142dd65>] dump_stack+0x67/0x92 [ 142.217211] [<ffffffff8107e4e6>] __warn+0xc6/0xe0 [ 142.217213] [<ffffffff8107e54a>] warn_slowpath_fmt+0x4a/0x50 [ 142.217214] [<ffffffff81559e3e>] drm_mm_takedown+0x2e/0x40 [ 142.217236] [<ffffffffa035c02a>] i915_gem_cleanup_stolen+0x1a/0x20 [i915] [ 142.217246] [<ffffffffa034c581>] i915_ggtt_cleanup_hw+0x31/0xb0 [i915] [ 142.217253] [<ffffffffa0310311>] i915_driver_cleanup_hw+0x31/0x40 [i915] [ 142.217260] [<ffffffffa0312001>] i915_driver_unload+0x141/0x1a0 [i915] [ 142.217268] [<ffffffffa031c2c4>] i915_pci_remove+0x14/0x20 [i915] [ 142.217269] [<ffffffff8147d214>] pci_device_remove+0x34/0xb0 [ 142.217271] [<ffffffff8157b14c>] __device_release_driver+0x9c/0x150 [ 142.217272] [<ffffffff8157bcc6>] driver_detach+0xb6/0xc0 [ 142.217273] [<ffffffff8157abe3>] bus_remove_driver+0x53/0xd0 [ 142.217274] [<ffffffff8157c787>] driver_unregister+0x27/0x50 [ 142.217276] [<ffffffff8147c265>] pci_unregister_driver+0x25/0x70 [ 142.217287] [<ffffffffa03d764c>] i915_exit+0x1a/0x71 [i915] [ 142.217289] [<ffffffff811136b3>] SyS_delete_module+0x193/0x1e0 [ 142.217291] [<ffffffff818174ae>] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 142.217292] ---[ end trace 6fd164859c154772 ]--- [ 142.217505] [drm:show_leaks] *ERROR* node [6b6b6b6b6b6b6b6b + 6b6b6b6b6b6b6b6b]: inserted at [<ffffffff81559ff3>] save_stack.isra.1+0x53/0xa0 [<ffffffff8155a98d>] drm_mm_insert_node_in_range_generic+0x2ad/0x360 [<ffffffffa035bf23>] i915_gem_stolen_insert_node_in_range+0x93/0xe0 [i915] [<ffffffffa035c855>] i915_gem_object_create_stolen+0x75/0xb0 [i915] [<ffffffffa036a51a>] intel_engine_create_ring+0x9a/0x140 [i915] [<ffffffffa036a921>] intel_init_ring_buffer+0xf1/0x440 [i915] [<ffffffffa036be1b>] intel_init_render_ring_buffer+0xab/0x1b0 [i915] [<ffffffffa0363d08>] intel_engines_init+0xc8/0x210 [i915] [<ffffffffa0355d7c>] i915_gem_init+0xac/0xf0 [i915] [<ffffffffa0311454>] i915_driver_load+0x9c4/0x1430 [i915] [<ffffffffa031c2f8>] i915_pci_probe+0x28/0x40 [i915] [<ffffffff8147d315>] pci_device_probe+0x85/0xf0 [<ffffffff8157b7ff>] driver_probe_device+0x21f/0x430 [<ffffffff8157baee>] __driver_attach+0xde/0xe0 In particular note that the node was being poisoned as we inspected the list, a clear indication that the object is being freed as we make the assertion. v2: Don't loop, just assert that we do all the work required as that will be better at detecting further errors. Fixes: fbbd37b3 ("drm/i915: Move object release to a freelist + worker") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-1-chris@chris-wilson.co.uk
-
- 31 Oct, 2016 5 commits
-
-
Ville Syrjälä authored
Kill the switch statement from the sprite init code and replace with a more straightforward if ladder. Now each significant evolution of the sprite hardware is in its own neat box. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-5-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Due to the plane->index not getting readjusted in drm_plane_cleanup(), we can't continue initialization of some plane/crtc init fails. Well, we sort of could I suppose if we left all initialized planes on the list, but that would expose those planes to userspace as well. But for crtcs the situation is even worse since we assume that pipe==crtc index occasionally, so we can't really deal with a partially initialize set of crtcs. So seems safest to just abort the entire thing if anything goes wrong. All the failure paths here are kmalloc()s anyway, so it seems unlikely we'd get very far if these start failing. v2: Add (enum plane) case to silence gcc Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The zpos magic sorting uses the object ID to solve conflicting zpos values. Let's initialize our planes in an order that makes the object IDs agree with the normal primary->sprites->cursor z order. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
We don't currently implement support for sprite planes on pre-ilk platforms, so let's leave num_sprites at 0 so that we don't get spurious errors during driver init. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
As we may allocate from within the obj->mm.lock we may enter the shrinker for direct reclaim. Operating on the current object is prevented by checking for obj->mm.pages (which is only set as the last operation in the allocation path). However, we need to identify the single recursion of accessing another object's obj->mm.lock as the two locks have identical class and so appear to be the same to lockdep, convincing it that a deadlock is possible. Use mutex_lock_nested() to remove the false positive. [ 2165.945734] ================================= [ 2165.945749] [ INFO: inconsistent lock state ] [ 2165.945765] 4.9.0-rc2+ #2 Tainted: G W [ 2165.945781] --------------------------------- [ 2165.945796] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. [ 2165.945816] kswapd0/62 [HC0[0]:SC0[0]:HE1:SE1] takes: (&obj->mm.lock){+.+.?.}, at: [<ffffffffc0289a1f>] i915_gem_shrink+0x29f/0x500 [i915] [ 2165.945904] {RECLAIM_FS-ON-W} state was registered at: [ 2165.945931] [<ffffffffb10bd50f>] mark_held_locks+0x6f/0xa0 [ 2165.945956] [<ffffffffb10bf889>] lockdep_trace_alloc+0x69/0xc0 [ 2165.945982] [<ffffffffb11eea53>] kmem_cache_alloc_trace+0x33/0x2a0 [ 2165.946019] [<ffffffffc028a28a>] i915_gem_object_get_pages_stolen+0x6a/0xd0 [i915] [ 2165.946060] [<ffffffffc027e1d0>] ____i915_gem_object_get_pages+0x20/0x60 [i915] [ 2165.946098] [<ffffffffc027e268>] __i915_gem_object_get_pages+0x58/0x70 [i915] [ 2165.946138] [<ffffffffc028a3dc>] _i915_gem_object_create_stolen+0xec/0x120 [i915] [ 2165.946177] [<ffffffffc028af73>] i915_gem_object_create_stolen_for_preallocated+0xf3/0x3f0 [i915] [ 2165.946222] [<ffffffffc02bae43>] intel_alloc_initial_plane_obj.isra.125+0xd3/0x200 [i915] [ 2165.946266] [<ffffffffc02cb1c1>] intel_modeset_init+0x931/0x1530 [i915] [ 2165.946301] [<ffffffffc023d584>] i915_driver_load+0xa14/0x14a0 [i915] [ 2165.946335] [<ffffffffc0248aff>] i915_pci_probe+0x4f/0x70 [i915] [ 2165.946362] [<ffffffffb13cc452>] local_pci_probe+0x42/0xa0 [ 2165.946386] [<ffffffffb13cd903>] pci_device_probe+0x103/0x150 [ 2165.946411] [<ffffffffb14adeb3>] driver_probe_device+0x223/0x430 [ 2165.946436] [<ffffffffb14ae1a3>] __driver_attach+0xe3/0xf0 [ 2165.946461] [<ffffffffb14ab943>] bus_for_each_dev+0x73/0xc0 [ 2165.946485] [<ffffffffb14ad5ee>] driver_attach+0x1e/0x20 [ 2165.946508] [<ffffffffb14ad003>] bus_add_driver+0x173/0x270 [ 2165.946533] [<ffffffffb14aee70>] driver_register+0x60/0xe0 [ 2165.946557] [<ffffffffb13cbd6d>] __pci_register_driver+0x5d/0x60 [ 2165.946606] [<ffffffffc0378057>] soundcore_open+0x17/0x230 [soundcore] [ 2165.946636] [<ffffffffb1000450>] do_one_initcall+0x50/0x180 [ 2165.946661] [<ffffffffb117fd2d>] do_init_module+0x5f/0x1f1 [ 2165.946685] [<ffffffffb1108964>] load_module+0x2174/0x2a80 [ 2165.946709] [<ffffffffb11094df>] SYSC_finit_module+0xdf/0x110 [ 2165.946734] [<ffffffffb110952e>] SyS_finit_module+0xe/0x10 [ 2165.946758] [<ffffffffb1742aea>] entry_SYSCALL_64_fastpath+0x18/0xad [ 2165.946776] irq event stamp: 90871 [ 2165.946788] hardirqs last enabled at (90871): [ 2165.946805] [<ffffffffb173e9da>] __mutex_unlock_slowpath+0x11a/0x1c0 [ 2165.946823] hardirqs last disabled at (90870): [ 2165.946839] [<ffffffffb173e91b>] __mutex_unlock_slowpath+0x5b/0x1c0 [ 2165.946856] softirqs last enabled at (90858): [ 2165.946872] [<ffffffffb174581a>] __do_softirq+0x39a/0x4c6 [ 2165.946887] softirqs last disabled at (90671): [ 2165.946902] [<ffffffffb1066cea>] irq_exit+0xea/0xf0 [ 2165.946916] other info that might help us debug this: [ 2165.946936] Possible unsafe locking scenario: [ 2165.946955] CPU0 [ 2165.946965] ---- [ 2165.946975] lock(&obj->mm.lock); [ 2165.947000] <Interrupt> [ 2165.947010] lock(&obj->mm.lock); [ 2165.947035] *** DEADLOCK *** [ 2165.947054] 2 locks held by kswapd0/62: [ 2165.947067] #0: (shrinker_rwsem){++++..}, at: [<ffffffffb119a20e>] shrink_slab.part.40+0x5e/0x5d0 [ 2165.947120] #1: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffc028954b>] i915_gem_shrinker_lock+0x1b/0x60 [i915] [ 2165.948909] stack backtrace: [ 2165.950650] CPU: 2 PID: 62 Comm: kswapd0 Tainted: G W 4.9.0-rc2+ #2 [ 2165.951587] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015 [ 2165.952484] ffffc90000b5f8c8 ffffffffb137f645 ffff88016c5a2700 ffffffffb25f20a0 [ 2165.953395] ffffc90000b5f918 ffffffffb10bcecd 0000000000000000 ffff880100000001 [ 2165.954305] 0000000000000001 000000000000000a ffff88016c5a2fd0 ffff88016c5a2700 [ 2165.955240] Call Trace: [ 2165.956170] [<ffffffffb137f645>] dump_stack+0x68/0x93 [ 2165.957071] [<ffffffffb10bcecd>] print_usage_bug+0x1dd/0x1f0 [ 2165.957979] [<ffffffffb10bd439>] mark_lock+0x559/0x5c0 [ 2165.958875] [<ffffffffb10bc3f0>] ? print_shortest_lock_dependencies+0x1b0/0x1b0 [ 2165.959829] [<ffffffffb10be04d>] __lock_acquire+0x66d/0x12a0 [ 2165.960729] [<ffffffffb11ef541>] ? __slab_free+0xa1/0x340 [ 2165.961625] [<ffffffffb10dba5d>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 2165.962530] [<ffffffffb10bd50f>] ? mark_held_locks+0x6f/0xa0 [ 2165.963457] [<ffffffffb10bf0b0>] lock_acquire+0xf0/0x1f0 [ 2165.964368] [<ffffffffc0289a1f>] ? i915_gem_shrink+0x29f/0x500 [i915] [ 2165.965269] [<ffffffffc0289a1f>] ? i915_gem_shrink+0x29f/0x500 [i915] [ 2165.966150] [<ffffffffb173d837>] mutex_lock_nested+0x77/0x420 [ 2165.967030] [<ffffffffc0289a1f>] ? i915_gem_shrink+0x29f/0x500 [i915] [ 2165.967952] [<ffffffffc027c7a1>] ? __i915_gem_object_put_pages.part.58+0x161/0x1b0 [i915] [ 2165.968835] [<ffffffffc0289a1f>] i915_gem_shrink+0x29f/0x500 [i915] [ 2165.969712] [<ffffffffc0289e40>] i915_gem_shrinker_scan+0x70/0xb0 [i915] [ 2165.970591] [<ffffffffb119a3ae>] shrink_slab.part.40+0x1fe/0x5d0 [ 2165.971504] [<ffffffffb119f19c>] shrink_node+0x22c/0x320 [ 2165.972371] [<ffffffffb11a05fb>] kswapd+0x38b/0x9b0 [ 2165.973238] [<ffffffffb11a0270>] ? mem_cgroup_shrink_node+0x330/0x330 [ 2165.974068] [<ffffffffb108630f>] kthread+0xff/0x120 [ 2165.974929] [<ffffffffb1086210>] ? kthread_park+0x60/0x60 [ 2165.975847] [<ffffffffb1742d57>] ret_from_fork+0x27/0x40 Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 1233e2db ("drm/i915: Move object backing storage manipulation...") Testcase: igt/gem_ctx_create/maximum-swap Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161031124048.30355-1-chris@chris-wilson.co.uk
-
- 29 Oct, 2016 2 commits
-
-
Jani Nikula authored
In practice, none of the i915 developers Cc dri-devel for strictly i915 specific patches. Make MAINTAINERS reflect reality, and reduce random i915 specific noise on dri-devel. Also, we have a fairly large crowd reading and responding on intel-gfx, and we're pretty good at involving dri-devel when that is appropriate. Cc: dri-devel@lists.freedesktop.org Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477498292-9808-1-git-send-email-jani.nikula@intel.com
-
Lyude authored
One of the CI machines began to run into issues with the hpd poller suddenly waking up in the midst of the late suspend phase. It looks like this is getting caused by the fact we now deinitialize power wells in late suspend, which means that intel_hpd_poll_init() gets called in late suspend causing polling to get re-enabled. So, when deinitializing power wells on valleyview we now refrain from enabling polling in the midst of suspend. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040 Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd") Signed-off-by: Lyude <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Saarinen <jani.saarinen@intel.com> Cc: Petry Latvala <petri.latvala@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com
-
- 28 Oct, 2016 17 commits
-
-
Chris Wilson authored
With the infrastructure converted over to tracking multiple timelines in the GEM API whilst preserving the efficiency of using a single execution timeline internally, we can now assign a separate timeline to every context with full-ppgtt. v2: Add a comment to indicate the xfer between timelines upon submission. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-35-chris@chris-wilson.co.uk
-
Chris Wilson authored
Defer the assignment of the global seqno on a request to its submission. In the next patch, we will only allocate the global seqno at that time, here we are just enabling the wait-for-submission before wait-for-seqno paths. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-34-chris@chris-wilson.co.uk
-
Chris Wilson authored
A restriction on our global seqno is that they cannot wrap, and that we cannot use the value 0. This allows us to detect when a request has not yet been submitted, its global seqno is still 0, and ensures that hardware semaphores are monotonic as required by older hardware. To meet these restrictions when we defer the assignment of the global seqno, we must check that we have an available slot in the global seqno space during request construction. If that test fails, we wait for all requests to be completed and reset the hardware back to 0. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-33-chris@chris-wilson.co.uk
-
Chris Wilson authored
The breadcrumbs are about to be used from within IRQ context sections (e.g. nouveau signals a fence from an interrupt handler causing us to submit a new request) and/or from bottom-half tasklets (i.e. intel_lrc_irq_handler), therefore we need to employ the irqsafe spinlock variants. For example, deferring the request submission to the intel_lrc_irq_handler generates this trace: [ 66.388639] ================================= [ 66.388650] [ INFO: inconsistent lock state ] [ 66.388663] 4.9.0-rc2+ #56 Not tainted [ 66.388672] --------------------------------- [ 66.388682] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 66.388695] swapper/1/0 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 66.388706] (&(&b->lock)->rlock){+.?...} , at: [<ffffffff81401c88>] intel_engine_enable_signaling+0x78/0x150 [ 66.388761] {SOFTIRQ-ON-W} state was registered at: [ 66.388772] [ 66.388783] [<ffffffff810bd842>] __lock_acquire+0x682/0x1870 [ 66.388795] [ 66.388803] [<ffffffff810bedbc>] lock_acquire+0x6c/0xb0 [ 66.388814] [ 66.388824] [<ffffffff8161753a>] _raw_spin_lock+0x2a/0x40 [ 66.388835] [ 66.388845] [<ffffffff81401e41>] intel_engine_reset_breadcrumbs+0x21/0xb0 [ 66.388857] [ 66.388866] [<ffffffff81403ae7>] gen8_init_common_ring+0x67/0x100 [ 66.388878] [ 66.388887] [<ffffffff81403b92>] gen8_init_render_ring+0x12/0x60 [ 66.388903] [ 66.388912] [<ffffffff813f8707>] i915_gem_init_hw+0xf7/0x2a0 [ 66.388927] [ 66.388936] [<ffffffff813f899b>] i915_gem_init+0xbb/0xf0 [ 66.388950] [ 66.388959] [<ffffffff813b4980>] i915_driver_load+0x7e0/0x1330 [ 66.388978] [ 66.388988] [<ffffffff813c09d8>] i915_pci_probe+0x28/0x40 [ 66.389003] [ 66.389013] [<ffffffff812fa0db>] pci_device_probe+0x8b/0xf0 [ 66.389028] [ 66.389037] [<ffffffff8147737e>] driver_probe_device+0x21e/0x430 [ 66.389056] [ 66.389065] [<ffffffff8147766e>] __driver_attach+0xde/0xe0 [ 66.389080] [ 66.389090] [<ffffffff814751ad>] bus_for_each_dev+0x5d/0x90 [ 66.389105] [ 66.389113] [<ffffffff81477799>] driver_attach+0x19/0x20 [ 66.389134] [ 66.389144] [<ffffffff81475ced>] bus_add_driver+0x15d/0x260 [ 66.389159] [ 66.389168] [<ffffffff81477e3b>] driver_register+0x5b/0xd0 [ 66.389183] [ 66.389281] [<ffffffff812fa19b>] __pci_register_driver+0x5b/0x60 [ 66.389301] [ 66.389312] [<ffffffff81aed333>] i915_init+0x3e/0x45 [ 66.389326] [ 66.389336] [<ffffffff81ac2ffa>] do_one_initcall+0x8b/0x118 [ 66.389350] [ 66.389359] [<ffffffff81ac323a>] kernel_init_freeable+0x1b3/0x23b [ 66.389378] [ 66.389387] [<ffffffff8160fc39>] kernel_init+0x9/0x100 [ 66.389402] [ 66.389411] [<ffffffff816180e7>] ret_from_fork+0x27/0x40 [ 66.389426] irq event stamp: 315865 [ 66.389438] hardirqs last enabled at (315864): [<ffffffff816178f1>] _raw_spin_unlock_irqrestore+0x31/0x50 [ 66.389469] hardirqs last disabled at (315865): [<ffffffff816176b3>] _raw_spin_lock_irqsave+0x13/0x50 [ 66.389499] softirqs last enabled at (315818): [<ffffffff8107a04c>] _local_bh_enable+0x1c/0x50 [ 66.389530] softirqs last disabled at (315819): [<ffffffff8107a50e>] irq_exit+0xbe/0xd0 [ 66.389559] [ 66.389559] other info that might help us debug this: [ 66.389580] Possible unsafe locking scenario: [ 66.389580] [ 66.389598] CPU0 [ 66.389609] ---- [ 66.389620] lock(&(&b->lock)->rlock); [ 66.389650] <Interrupt> [ 66.389661] lock(&(&b->lock)->rlock); [ 66.389690] [ 66.389690] *** DEADLOCK *** [ 66.389690] [ 66.389715] 2 locks held by swapper/1/0: [ 66.389728] #0: (&(&tl->lock)->rlock){..-...}, at: [<ffffffff81403e01>] intel_lrc_irq_handler+0x201/0x3c0 [ 66.389785] #1: (&(&req->lock)->rlock/1){..-...}, at: [<ffffffff813fc0af>] __i915_gem_request_submit+0x8f/0x170 [ 66.389854] [ 66.389854] stack backtrace: [ 66.389959] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.9.0-rc2+ #56 [ 66.389976] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 66.389999] ffff88027fd03c58 ffffffff812beae5 ffff88027696e680 ffffffff822afe20 [ 66.390036] ffff88027fd03ca8 ffffffff810bb420 0000000000000001 0000000000000000 [ 66.390070] 0000000000000000 0000000000000006 0000000000000004 ffff88027696ee10 [ 66.390104] Call Trace: [ 66.390117] <IRQ> [ 66.390128] [<ffffffff812beae5>] dump_stack+0x68/0x93 [ 66.390147] [<ffffffff810bb420>] print_usage_bug+0x1d0/0x1e0 [ 66.390164] [<ffffffff810bb8a0>] mark_lock+0x470/0x4f0 [ 66.390181] [<ffffffff810ba9d0>] ? print_shortest_lock_dependencies+0x1b0/0x1b0 [ 66.390203] [<ffffffff810bd75d>] __lock_acquire+0x59d/0x1870 [ 66.390221] [<ffffffff810bedbc>] lock_acquire+0x6c/0xb0 [ 66.390237] [<ffffffff810bedbc>] ? lock_acquire+0x6c/0xb0 [ 66.390255] [<ffffffff81401c88>] ? intel_engine_enable_signaling+0x78/0x150 [ 66.390273] [<ffffffff8161753a>] _raw_spin_lock+0x2a/0x40 [ 66.390291] [<ffffffff81401c88>] ? intel_engine_enable_signaling+0x78/0x150 [ 66.390309] [<ffffffff81401c88>] intel_engine_enable_signaling+0x78/0x150 [ 66.390327] [<ffffffff813fc170>] __i915_gem_request_submit+0x150/0x170 [ 66.390345] [<ffffffff81403e8b>] intel_lrc_irq_handler+0x28b/0x3c0 [ 66.390363] [<ffffffff81079d97>] tasklet_action+0x57/0xc0 [ 66.390380] [<ffffffff8107a249>] __do_softirq+0x119/0x240 [ 66.390396] [<ffffffff8107a50e>] irq_exit+0xbe/0xd0 [ 66.390414] [<ffffffff8101afd5>] do_IRQ+0x65/0x110 [ 66.390431] [<ffffffff81618806>] common_interrupt+0x86/0x86 [ 66.390446] <EOI> [ 66.390457] [<ffffffff814ec6d1>] ? cpuidle_enter_state+0x151/0x200 [ 66.390480] [<ffffffff814ec7a2>] cpuidle_enter+0x12/0x20 [ 66.390498] [<ffffffff810b639e>] call_cpuidle+0x1e/0x40 [ 66.390516] [<ffffffff810b65ae>] cpu_startup_entry+0x10e/0x1f0 [ 66.390534] [<ffffffff81036133>] start_secondary+0x103/0x130 (This is split out of the defer global seqno allocation patch due to realisation that we need a more complete conversion if we want to defer request submission even further.) v2: lockdep was warning about mixed SOFTIRQ contexts not HARDIRQ contexts so we only need to use spin_lock_bh and not disable interrupts. v3: We need full irq protection as we may be called from a third party interrupt handler (via fences). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-32-chris@chris-wilson.co.uk
-
Chris Wilson authored
This will be used for communicating issues with this context to userspace, so we want to identify the parent process and the individual context. Note that the name isn't quite unique, it makes the presumption of there only being a single device fd per process. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-31-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently we try to reduce the number of synchronisations (now the number of requests we need to wait upon) by noting that if we have earlier waited upon a request, all subsequent requests in the timeline will be after the wait. This only applies to requests in this timeline, as other timelines will not be ordered by that waiter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-30-chris@chris-wilson.co.uk
-
Chris Wilson authored
Move the actual emission of the breadcrumb for closing the request from i915_add_request() to the submit callback. (It can be moved later when required.) This allows us to defer the allocation of the global_seqno from request construction to actual submission, allowing us to emit the requests out of order (wrt to the order of their construction, they still will only be executed one all of their dependencies are resolved including that all earlier requests on their timeline have been submitted.) We have to specialise how we then emit the request in order to write into the preallocated space, rather than at the tail of the ringbuffer (which will have been advanced by the addition of new requests). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-29-chris@chris-wilson.co.uk
-
Chris Wilson authored
In the next patch, we will use deferred breadcrumb emission. That requires reserving sufficient space in the ringbuffer to emit the breadcrumb, which first requires us to know how large the breadcrumb is. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-28-chris@chris-wilson.co.uk
-
Chris Wilson authored
Now that the emission of the request tail and its submission to hardware are two separate steps, engine->emit_request() is confusing. engine->emit_request() is called to emit the breadcrumb commands for the request into the ring, name it such (engine->emit_breadcrumb). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-27-chris@chris-wilson.co.uk
-
Chris Wilson authored
Though we will have multiple timelines, we still have a single timeline of execution. This we can use to provide an execution and retirement order of requests. This keeps tracking execution of requests simple, and vital for preserving a single waiter (i.e. so that we can order the waiters so that only the earliest to wakeup need be woken). To accomplish this we distinguish the seqno used to order requests per-context (external) and that used internally for execution. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-26-chris@chris-wilson.co.uk
-
Chris Wilson authored
In future patches, we will no longer be able to wait on a static global seqno and instead have to break our wait up into phases. First we wait for the global seqno assignment (upon submission to hardware), and once submitted we wait for the hardware to complete. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-25-chris@chris-wilson.co.uk
-
Chris Wilson authored
Before suspend, we wait for the switch to the kernel context. In order for all the other context images to be complete upon suspend, that switch must be the last operation by the GPU (i.e. this idling request must not overtake any pending requests). To make this request execute last, we make it depend on every other inflight request. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-24-chris@chris-wilson.co.uk
-
Chris Wilson authored
Our timelines are more than just a seqno. They also provide an ordered list of requests to be executed. Due to the restriction of handling individual address spaces, we are limited to a timeline per address space but we use a fence context per engine within. Our first step to introducing independent timelines per context (i.e. to allow each context to have a queue of requests to execute that have a defined set of dependencies on other requests) is to provide a timeline abstraction for the global execution queue. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-23-chris@chris-wilson.co.uk
-
Chris Wilson authored
After combining the dma-buf reservation object and the GEM reservation object, we lost the ability to do a nonblocking wait on the i915 request (as we blocked upon the reservation object during prepare_fb). We can instead convert the reservation object into a fence upon which we can asynchronously wait (including a forced timeout in case the DMA fence is never signaled). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-22-chris@chris-wilson.co.uk
-
Chris Wilson authored
In preparation to support many distinct timelines, we need to expand the activity tracking on the GEM object to handle more than just a request per engine. We already use the struct reservation_object on the dma-buf to handle many fence contexts, so integrating that into the GEM object itself is the preferred solution. (For example, we can now share the same reservation_object between every consumer/producer using this buffer and skip the manual import/export via dma-buf.) v2: Reimplement busy-ioctl (by walking the reservation object), postpone the ABI change for another day. Similarly use the reservation object to find the last_write request (if active and from i915) for choosing display CS flips. Caveats: * busy-ioctl: busy-ioctl only reports on the native fences, it will not warn of stalls (in set-domain-ioctl, pread/pwrite etc) if the object is being rendered to by external fences. It also will not report the same busy state as wait-ioctl (or polling on the dma-buf) in the same circumstances. On the plus side, it does retain reporting of which *i915* engines are engaged with this object. * non-blocking atomic modesets take a step backwards as the wait for render completion blocks the ioctl. This is fixed in a subsequent patch to use a fence instead for awaiting on the rendering, see "drm/i915: Restore nonblocking awaits for modesetting" * dynamic array manipulation for shared-fences in reservation is slower than the previous lockless static assignment (e.g. gem_exec_lut_handle runtime on ivb goes from 42s to 66s), mainly due to atomic operations (maintaining the fence refcounts). * loss of object-level retirement callbacks, emulated by VMA retirement tracking. * minor loss of object-level last activity information from debugfs, could be replaced with per-vma information if desired Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-21-chris@chris-wilson.co.uk
-
Chris Wilson authored
Having moved the locked phase of freeing an object to a separate worker, we can now declare to the core that we only need the unlocked variant of driver->gem_free_object, and can use the simple unreference internally. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-20-chris@chris-wilson.co.uk
-
Chris Wilson authored
We want to hide the latency of releasing objects and their backing storage from the submission, so we move the actual free to a worker. This allows us to switch to struct_mutex freeing of the object in the next patch. Furthermore, if we know that the object we are dereferencing remains valid for the duration of our access, we can forgo the usual synchronisation barriers and atomic reference counting. To ensure this we defer freeing an object til after an RCU grace period, such that any lookup of the object within an RCU read critical section will remain valid until after we exit that critical section. We also employ this delay for rate-limiting the serialisation on reallocation - we have to slow down object creation in order to prevent resource starvation (in particular, files). v2: Return early in i915_gem_tiling() ioctl to skip over superfluous work on error. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-19-chris@chris-wilson.co.uk
-