Skip to content

L
linux
Switch branch/tag
  1. 05 Aug, 2018 10 commits
    • Thomas Gleixner's avatar
      Documentation/l1tf: Remove Yonah processors from not vulnerable list · 58331136
      Thomas Gleixner authored 
      Dave reported, that it's not confirmed that Yonah processors are
unaffected. Remove them from the list.
Reported-by: default avatarave Hansen <dave.hansen@intel.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      58331136
    • Thomas Gleixner's avatar
      Merge 4.18-rc7 into master to pick up the KVM dependcy · f2701b77
      Thomas Gleixner authored 
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      f2701b77
    • Nicolai Stange's avatar
      x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr() · 18b57ce2
      Nicolai Stange authored 
      For VMEXITs caused by external interrupts, vmx_handle_external_intr()
indirectly calls into the interrupt handlers through the host's IDT.

It follows that these interrupts get accounted for in the
kvm_cpu_l1tf_flush_l1d per-cpu flag.

The subsequently executed vmx_l1d_flush() will thus be aware that some
interrupts have happened and conduct a L1d flush anyway.

Setting l1tf_flush_l1d from vmx_handle_external_intr() isn't needed
anymore. Drop it.
Signed-off-by: default avatarNicolai Stange <nstange@suse.de>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      18b57ce2
    • Nicolai Stange's avatar
      x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d · ffcba43f
      Nicolai Stange authored 
      The last missing piece to having vmx_l1d_flush() take interrupts after
VMEXIT into account is to set the kvm_cpu_l1tf_flush_l1d per-cpu flag on
irq entry.

Issue calls to kvm_set_cpu_l1tf_flush_l1d() from entering_irq(),
ipi_entering_ack_irq(), smp_reschedule_interrupt() and
uv_bau_message_interrupt().
Suggested-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarNicolai Stange <nstange@suse.de>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      ffcba43f
    • Nicolai Stange's avatar
      x86: Don't include linux/irq.h from asm/hardirq.h · 447ae316
      Nicolai Stange authored 
      The next patch in this series will have to make the definition of
irq_cpustat_t available to entering_irq().

Inclusion of asm/hardirq.h into asm/apic.h would cause circular header
dependencies like

  asm/smp.h
    asm/apic.h
      asm/hardirq.h
        linux/irq.h
          linux/topology.h
            linux/smp.h
              asm/smp.h

or

  linux/gfp.h
    linux/mmzone.h
      asm/mmzone.h
        asm/mmzone_64.h
          asm/smp.h
            asm/apic.h
              asm/hardirq.h
                linux/irq.h
                  linux/irqdesc.h
                    linux/kobject.h
                      linux/sysfs.h
                        linux/kernfs.h
                          linux/idr.h
                            linux/gfp.h

and others.

This causes compilation errors because of the header guards becoming
effective in the second inclusion: symbols/macros that had been defined
before wouldn't be available to intermediate headers in the #include chain
anymore.

A possible workaround would be to move the definition of irq_cpustat_t
into its own header and include that from both, asm/hardirq.h and
asm/apic.h.

However, this wouldn't solve the real problem, namely asm/harirq.h
unnecessarily pulling in all the linux/irq.h cruft: nothing in
asm/hardirq.h itself requires it. Also, note that there are some other
archs, like e.g. arm64, which don't have that #include in their
asm/hardirq.h.

Remove the linux/irq.h #include from x86' asm/hardirq.h.

Fix resulting compilation errors by adding appropriate #includes to *.c
files as needed.

Note that some of these *.c files could be cleaned up a bit wrt. to their
set of #includes, but that should better be done from separate patches, if
at all.
Signed-off-by: default avatarNicolai Stange <nstange@suse.de>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      447ae316
    • Nicolai Stange's avatar
      x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d · 45b575c0
      Nicolai Stange authored 
      Part of the L1TF mitigation for vmx includes flushing the L1D cache upon
VMENTRY.

L1D flushes are costly and two modes of operations are provided to users:
"always" and the more selective "conditional" mode.

If operating in the latter, the cache would get flushed only if a host side
code path considered unconfined had been traversed. "Unconfined" in this
context means that it might have pulled in sensitive data like user data
or kernel crypto keys.

The need for L1D flushes is tracked by means of the per-vcpu flag
l1tf_flush_l1d. KVM exit handlers considered unconfined set it. A
vmx_l1d_flush() subsequently invoked before the next VMENTER will conduct a
L1d flush based on its value and reset that flag again.

Currently, interrupts delivered "normally" while in root operation between
VMEXIT and VMENTER are not taken into account. Part of the reason is that
these don't leave any traces and thus, the vmx code is unable to tell if
any such has happened.

As proposed by Paolo Bonzini, prepare for tracking all interrupts by
introducing a new per-cpu flag, "kvm_cpu_l1tf_flush_l1d". It will be in
strong analogy to the per-vcpu ->l1tf_flush_l1d.

A later patch will make interrupt handlers set it.

For the sake of cache locality, group kvm_cpu_l1tf_flush_l1d into x86'
per-cpu irq_cpustat_t as suggested by Peter Zijlstra.

Provide the helpers kvm_set_cpu_l1tf_flush_l1d(),
kvm_clear_cpu_l1tf_flush_l1d() and kvm_get_cpu_l1tf_flush_l1d(). Make them
trivial resp. non-existent for !CONFIG_KVM_INTEL as appropriate.

Let vmx_l1d_flush() handle kvm_cpu_l1tf_flush_l1d in the same way as
l1tf_flush_l1d.
Suggested-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Suggested-by: default avatarPeter Zijlstra <peterz@infradead.org>
Signed-off-by: default avatarNicolai Stange <nstange@suse.de>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Reviewed-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      45b575c0
    • Nicolai Stange's avatar
      x86/irq: Demote irq_cpustat_t::__softirq_pending to u16 · 9aee5f8a
      Nicolai Stange authored 
      An upcoming patch will extend KVM's L1TF mitigation in conditional mode
to also cover interrupts after VMEXITs. For tracking those, stores to a
new per-cpu flag from interrupt handlers will become necessary.

In order to improve cache locality, this new flag will be added to x86's
irq_cpustat_t.

Make some space available there by shrinking the ->softirq_pending bitfield
from 32 to 16 bits: the number of bits actually used is only NR_SOFTIRQS,
i.e. 10.
Suggested-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarNicolai Stange <nstange@suse.de>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Reviewed-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      9aee5f8a
    • Nicolai Stange's avatar
      x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush() · 5b6ccc6c
      Nicolai Stange authored 
      Currently, vmx_vcpu_run() checks if l1tf_flush_l1d is set and invokes
vmx_l1d_flush() if so.

This test is unncessary for the "always flush L1D" mode.

Move the check to vmx_l1d_flush()'s conditional mode code path.

Notes:
- vmx_l1d_flush() is likely to get inlined anyway and thus, there's no
  extra function call.
  
- This inverts the (static) branch prediction, but there hadn't been any
  explicit likely()/unlikely() annotations before and so it stays as is.
Signed-off-by: default avatarNicolai Stange <nstange@suse.de>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      5b6ccc6c
    • Nicolai Stange's avatar
      x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond' · 427362a1
      Nicolai Stange authored 
      The vmx_l1d_flush_always static key is only ever evaluated if
vmx_l1d_should_flush is enabled. In that case however, there are only two
L1d flushing modes possible: "always" and "conditional".

The "conditional" mode's implementation tends to require more sophisticated
logic than the "always" mode.

Avoid inverted logic by replacing the 'vmx_l1d_flush_always' static key
with a 'vmx_l1d_flush_cond' one.

There is no change in functionality.
Signed-off-by: default avatarNicolai Stange <nstange@suse.de>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      427362a1
    • Nicolai Stange's avatar
      x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush() · 379fd0c7
      Nicolai Stange authored 
      vmx_l1d_flush() gets invoked only if l1tf_flush_l1d is true. There's no
point in setting l1tf_flush_l1d to true from there again.
Signed-off-by: default avatarNicolai Stange <nstange@suse.de>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      379fd0c7
  3. 29 Jul, 2018 5 commits
    • Linus Torvalds's avatar
      Linux 4.18-rc7 · acb18725
      Linus Torvalds authored
      acb18725
    • Linus Torvalds's avatar
      Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 · 3cfb6772
      Linus Torvalds authored 
      Pull ext4 fixes from Ted Ts'o:
 "Some miscellaneous ext4 fixes for 4.18; one fix is for a regression
  introduced in 4.18-rc4.

  Sorry for the late-breaking pull. I was originally going to wait for
  the next merge window, but Eric Whitney found a regression introduced
  in 4.18-rc4, so I decided to push out the regression plus the other
  fixes now. (The other commits have been baking in linux-next since
  early July)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix check to prevent initializing reserved inodes
  ext4: check for allocation block validity with block group locked
  ext4: fix inline data updates with checksums enabled
  ext4: clear mmp sequence number when remounting read-only
  ext4: fix false negatives *and* false positives in ext4_check_descriptors()
      3cfb6772
    • Linus Torvalds's avatar
      squashfs: be more careful about metadata corruption · 01cfb793
      Linus Torvalds authored 
      Anatoly Trosinenko reports that a corrupted squashfs image can cause a
kernel oops.  It turns out that squashfs can end up being confused about
negative fragment lengths.

The regular squashfs_read_data() does check for negative lengths, but
squashfs_read_metadata() did not, and the fragment size code just
blindly trusted the on-disk value.  Fix both the fragment parsing and
the metadata reading code.
Reported-by: default avatarAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: stable@kernel.org
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      01cfb793
    • Theodore Ts'o's avatar
      ext4: fix check to prevent initializing reserved inodes · 50122847
      Theodore Ts'o authored 
      Commit 8844618d: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set.  Unfortunately, this is not correct,
since a freshly created file system has this flag cleared.  It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:

   mkfs.ext4 /dev/vdc
   mount -o ro /dev/vdc /vdc
   mount -o remount,rw /dev/vdc

Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.

This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.

Fixes: 8844618d ("ext4: only look at the bg_flags field if it is valid")
Reported-by: default avatarEric Whitney <enwlinux@gmail.com>
Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      50122847
    • Linus Torvalds's avatar
      Merge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random · a26fb01c
      Linus Torvalds authored 
      Pull random fixes from Ted Ts'o:
 "In reaction to the fixes to address CVE-2018-1108, some Linux
  distributions that have certain systemd versions in some cases
  combined with patches to libcrypt for FIPS/FEDRAMP compliance, have
  led to boot-time stalls for some hardware.

  The reaction by some distros and Linux sysadmins has been to install
  packages that try to do complicated things with the CPU and hope that
  leads to randomness.

  To mitigate this, if RDRAND is available, mix it into entropy provided
  by userspace. It won't hurt, and it will probably help"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: mix rdrand with entropy sent in from userspace
      a26fb01c
  5. 28 Jul, 2018 3 commits
  7. 27 Jul, 2018 22 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7