When the MAC address is supplied via platform_data it should be OK as
it is and should not be modified in case of a dual FEC setup.
Also copying the MAC from platform_data to the single 'macaddr'
variable will overwrite the MAC for the first interface in case of a
dual FEC setup.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

prevent calling request_irq() with a known invalid IRQ number and
preserve the return value of the platform_get_irq() function
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Upon detection of a FDX/HDX change the interface is restarted twice.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The con_id is actually not needed for clk_get().
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- remove some bogus whitespace
 - remove line wraps from printk messages
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the tg3 version to 3.122.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the driver to return the flow control configuration
rather than the flow control status through the ETHTOOL_GPAUSEPARAM
ioctl.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds code to track the autonegotiation advertisements of the
link partner and report them through ethtool.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch integrates tg3_adv_1000T_flowctrl_ok() into
tg3_copper_is_advertising_all() and renames the function
tg3_phy_copper_an_config_ok().
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tg3 has a place to store stats, but doesn't really use it.  This patch
modifies the driver so that stats are saved across chip resets and gets
cleared across close / open calls.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes the ethtool stats member from the tg3 device
structure.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If user has configured a MAC address that is not one of the existing
ports of the bridge, then we need to add a special entry in the forwarding
table. This forwarding table entry has no outgoing port so it has to be
treated a little differently. The special entry is reported by the netlink
interface with ifindex of bridge, but ignored by the old interface since there
is no usable way to put it in the ABI.
Reported-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass bridge to fdb_notify so it can determine correct namespace based
on namespace of bridge rather than namespace of destination port.
Also makes next patch easier.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move fdb_notify outside of fdb_create. This fixes the problem
that notification of local entries are not flagged correctly.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

BUG_ON is too strict in a number of circumstances,
use WARN_ON instead. Protocol errors should not halt the system.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Various bugfixes for caif_shmcore.c:
- fix deadlocks due to improper usage of spin-lock
- add missing spin-lock init
- don't call dev_kfree_skb() with irqs disabled,
  use dev_kfree_skb_irq() instead.
- fix potential skb null pointer de-reference.

Squashed original patches from:
Rabin Vincent <rabin.vincent@stericsson.com>
Durga Prasada Rao BATHINA <durgaprasadarao.b@stericcson.com>
Arun Murthy <arun.murthy@stericsson.com>
Bibek Basu <bibek.basu@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix bad assert on fragment size triggering false positive.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Raising wake before flushing FIFO and lowering it after caused a
spike on AC wake that were sometimes detected and acted upon by the
modem. Fixed this by remove wake line modification when flushing FIFO.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

And return error pointers.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Don't provide FCoE and iSCSI statistics to management firmware if
CONFIG_CNIC is not set.  Some needed structure fields are not defined
without CONFIG_CNIC.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: Silence seq_scale() unused warning
  ipv4:correct description for tcp_max_syn_backlog
  pasemi_mac: Fix building as module
  netback: Fix alert message.
  r8169: fix Rx index race between FIFO overflow recovery and NAPI handler.
  r8169: Rx FIFO overflow fixes.
  ipv4: Fix peer validation on cached lookup.
  ipv4: make sure RTO_ONLINK is saved in routing cache
  iwlwifi: change the default behavior of watchdog timer
  iwlwifi: do not re-configure HT40 after associated
  iwlagn: fix HW crypto for TX-only keys
  Revert "mac80211: clear sta.drv_priv on reconfiguration"
  mac80211: fill rate filter for internal scan requests
  cfg80211: amend regulatory NULL dereference fix
  cfg80211: fix race on init and driver registration

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ftrace: Fix hash record accounting bug
  perf: Fix parsing of __print_flags() in TP_printk()
  jump_label: jump_label_inc may return before the code is patched
  ftrace: Remove force undef config value left for testing
  tracing: Restore system filter behavior
  tracing: fix event_subsystem ref counting

On a CONFIG_NET=y build

net/core/secure_seq.c:22: warning: 'seq_scale' defined but not
used
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch moves the sock_ code from inet_diag.c to generic sock_diag.c
file and provides necessary request_module-s calls and a pointer on
inet_diag_compat dumping routine.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now all the code works with sock_diag_req-compatible structs, so it's
possible to stop using the inet_diag_type2proto in inet_csk_diag_fill.
Pass the inet_diag_req into it and use the sdiag_protocol field. At the
same time remove the explicit ext argument, since it's also on the req.

However, this conversion is still required in _compat code, so just move
this routine, not remove.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The new API will specify family to work with. Teach the existing
socket walking code to bypass not interesting ones.

To preserve compatibility with existing behavior the _compat code
sets interesting family to AF_UNSPEC to dump them all.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make inet_diag_dumo work with given header instead of calculating
one from the nl message.

The SOCK_DIAG_BY_FAMILY just passes skb's one through, the compat code
converts the old header to new one.

Also fix the bytecode calculation to find one at proper offset.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make inet_diag_get_exact work with given header instead of calculating
one from the nl message.

The SOCK_DIAG_BY_FAMILY just passes skb's one through, the compat code
converts the old header to new one.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This one coinsides with the sock_diag_req in the beginning and
contains only used fields from its previous analogue.

The existing code is patched to use the _compat version of it
for now.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When receiving the SOCK_DIAG_BY_FAMILY message we have to find the
handler for provided family and pass the nl message to it.

This patch describes an infrastructure to work with such nandlers
and implements stubs for AF_INET(6) ones.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sorry, but the vger didn't let this message go to the list. Re-sending it with
less spam-filter-prone subject.

When dumping the AF_INET/AF_INET6 sockets user will also specify the protocol,
so prepare the protocol diag handlers to work with IPPROTO_ constants.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current code calculates it at fixed offset. This offset will change, so
move the BC calculation upper to make the further patching simpler.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This type will run the family+protocol based socket dumping.
Also prepare the stub function for it.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ultimate goal is to get the sock_diag module, that works in
family+protocol terms. Currently this is suitable to do on the
inet_diag basis, so rename parts of the code. It will be moved
to sock_diag.c later.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix dump upon device removal, by moving deinitialization from
platform-device-remove to network-interface-uninit.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 2df1a70a  "bnx2x: Support
for byte queue limits" has introduced an asymmetry in usage of
netdev_tx_completed_queue and netdev_tx_sent_queue. Missing
call to netdev_tx_sent_queue causes the crash during ethtool -t.

The patch adds the missing call.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>