This is useful to see which EC commands are being executed and when.

To enable:

    echo 1 > /sys/kernel/debug/tracing/events/cros_ec/enable

Example:

    cros_ec_cmd: version: 0, command: EC_CMD_GET_VERSION
    cros_ec_cmd: version: 0, command: EC_CMD_GET_PROTOCOL_INFO
    cros_ec_cmd: version: 1, command: EC_CMD_GET_CMD_VERSIONS
    cros_ec_cmd: version: 1, command: EC_CMD_USB_PD_CONTROL

The list of current commands is generated using the following script:

    sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1),\\/p' include/linux/mfd/cros_ec_commands.h
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer() so we can remove some redundant code.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>

Add EC host command support through rpmsg.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

As part of Chrome OS's FAFT (Fully Automated Firmware Testing)
tests, we need to ensure that the H1 chip is properly setting
some GPIO lines. The h1_gpio attribute exposes the state
of the lines:
- ENTRY_TO_FACT_MODE in BIT(0)
- SPI_CHROME_SEL in BIT(1)

There are two reasons that I am exposing this in debugfs,
and not as a GPIO:
1. This is only useful for testing, so end users shouldn't ever
care about this. In fact, if it passes the tests, then the value of
h1_gpio will always be 2, so it would be really uninteresting for users.
2. This GPIO is not connected to, controlled by, or really even related
to the AP. The GPIO runs between the EC and the H1 security chip.

Changes in v4:
- Use "0x02x\n" instead of "02x\n" for format string
- Use DEFINE_DEBUGFS_ATTRIBUTE()
- Add documentation
Changes in v3:
- Fix documentation to correspond with formatting change in v2.
Changes in v2:
- Zero out the unused fields in the request.
- Format result as "%02x\n" instead of as a decimal.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

The current API for the wilco EC mailbox interface is bad.

It assumes that most messages sent to the EC follow a similar structure,
with a command byte in MBOX[0], followed by a junk byte, followed by
actual data. This doesn't happen in several cases, such as setting the
RTC time, using the raw debugfs interface, and reading or writing
properties such as the Peak Shift policy (this last to be submitted soon).

Similarly for the response message from the EC, the current interface
assumes that the first byte of data is always 0, and the second byte
is unused. However, in both setting and getting the RTC time, in the
debugfs interface, and for reading and writing properties, this isn't
true.

The current way to resolve this is to use WILCO_EC_FLAG_RAW* flags to
specify when and when not to skip these initial bytes in the sent and
received message. They are confusing and used so much that they are
normal, and not exceptions. In addition, the first byte of
response in the debugfs interface is still always skipped, which is
weird, since this raw interface should be giving the entire result.

Additionally, sent messages assume the first byte is a command, and so
struct wilco_ec_message contains the "command" field. In setting or
getting properties however, the first byte is not a command, and so this
field has to be filled with a byte that isn't actually a command. This
is again inconsistent.

wilco_ec_message contains a result field as well, copied from
wilco_ec_response->result. The message result field should be removed:
if the message fails, the cause is already logged, and the callers are
alerted. They will never care about the actual state of the result flag.

These flags and different cases make the wilco_ec_transfer() function,
used in wilco_ec_mailbox(), really gross, dealing with a bunch of
different cases. It's difficult to figure out what it is doing.

Finally, making these assumptions about the structure of a message make
it so that the messages do not correspond well with the specification
for the EC's mailbox interface. For instance, this interface
specification may say that MBOX[9] in the received message contains
some information, but the calling code needs to remember that the first
byte of response is always skipped, and because it didn't set the
RESPONSE_RAW flag, the next byte is also skipped, so this information
is actually contained within wilco_ec_message->response_data[7]. This
makes it difficult to maintain this code in the future.

To fix these problems this patch standardizes the mailbox interface by:
- Removing the WILCO_EC_FLAG_RAW* flags
- Removing the command and reserved_raw bytes from wilco_ec_request
- Removing the mbox0 byte from wilco_ec_response
- Simplifying wilco_ec_transfer() because of these changes
- Gives the callers of wilco_ec_mailbox() the responsibility of exactly
  and consistently defining the structure of the mailbox request and
  response
- Removing command and result from wilco_ec_message.

This results in the reduction of total code, and makes it much more
maintainable and understandable.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

As new transfer mechanisms are added to the EC codebase, they may
not support v2 of the EC protocol.

If the v3 initial handshake transfer fails, the kernel will try
and call cmd_xfer as a fallback. If v2 is not supported, cmd_xfer
will be NULL, and the code will end up causing a kernel panic.

Add a check for NULL before calling the transfer function, along
with a helpful comment explaining how one might end up in this
situation.
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

The CrOS USB PD logging feature is logically separate functionality of
the charge manager, hence has its own driver. The driver logs the event
data for the USB PD charger available in some ChromeOS Embedded
Controllers.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
[remove macro to APPEND_STRING and minor cleanups]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

The software running on the Chrome OS Embedded Controller (cros_ec)
handles SPI transfers in a bit of a wonky way.  Specifically if the EC
sees too long of a delay in a SPI transfer it will give up and the
transfer will be counted as failed.  Unfortunately the timeout is
fairly short, though the actual number may be different for different
EC codebases.

We can end up tripping the timeout pretty easily if we happen to
preempt the task running the SPI transfer and don't get back to it for
a little while.

Historically this hasn't been a _huge_ deal because:
1. On old devices Chrome OS used to run PREEMPT_VOLUNTARY.  That meant
   we were pretty unlikely to take a big break from the transfer.
2. On recent devices we had faster / more processors.
3. Recent devices didn't use "cros-ec-spi-pre-delay".  Using that
   delay makes us more likely to trip this use case.
4. For whatever reasons (I didn't dig) old kernels seem to be less
   likely to trip this.
5. For the most part it's kinda OK if a few transfers to the EC fail.
   Mostly we're just polling the battery or doing some other task
   where we'll try again.

Even with the above things, this issue has reared its ugly head
periodically.  We could solve this in a nice way by adding reliable
retries to the EC protocol [1] or by re-designing the code in the EC
codebase to allow it to wait longer, but that code doesn't ever seem
to get changed.  ...and even if it did, it wouldn't help old devices.

It's now time to finally take a crack at making this a little better.
This patch isn't guaranteed to make every cros_ec SPI transfer
perfect, but it should improve things by a few orders of magnitude.
Specifically you can try this on a rk3288-veyron Chromebook (which is
slower and also _does_ need "cros-ec-spi-pre-delay"):
  md5sum /dev/zero &
  md5sum /dev/zero &
  md5sum /dev/zero &
  md5sum /dev/zero &
  while true; do
    cat /sys/class/power_supply/sbs-20-000b/charge_now > /dev/null;
  done
...before this patch you'll see boatloads of errors.  After this patch I
don't see any in the testing I did.

The way this patch works is by effectively boosting the priority of
the cros_ec transfers.  As far as I know there is no simple way to
just boost the priority of the current process temporarily so the way
we accomplish this is by queuing the work on the system_highpri_wq.

NOTE: this patch relies on the fact that the SPI framework attempts to
push the messages out on the calling context (which is the one that is
boosted to high priority).  As I understand from earlier (long ago)
discussions with Mark Brown this should be a fine assumption.  Even if
it isn't true sometimes this patch will still not make things worse.

[1] https://crbug.com/678675Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>

If the debugfs interface is enabled, every time a CrOS device is
instantiated a warning like this can appear for every probed device.

 "device does not support reading the console log"

The warning message adds nothing, rather it is source of confusion as
this is expected on some cases. For example, on Samus, that has a
cros-ec and a cros-pd instance the message appears twice, and I suspect
this will happen also on those devices that has a non-standard EC.

If the command is not supported just return silently and don't print the
warning, otherwise the code will already print an error.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for 5.1"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: prohibit fstrim in norecovery mode
  ext4: cleanup bh release code in ext4_ind_remove_space()
  ext4: brelse all indirect buffer in ext4_ind_remove_space()
  ext4: report real fs size after failed resize
  ext4: add missing brelse() in add_new_gdb_meta_bg()
  ext4: remove useless ext4_pin_inode()
  ext4: avoid panic during forced reboot
  ext4: fix data corruption caused by unaligned direct AIO
  ext4: fix NULL pointer dereference while journal is aborted

Pull scheduler updates from Thomas Gleixner:
 "Third more careful attempt for this set of fixes:

   - Prevent a 32bit math overflow in the cpufreq code

   - Fix a buffer overflow when scanning the cgroup2 cpu.max property

   - A set of fixes for the NOHZ scheduler logic to prevent waking up
     CPUs even if the capacity of the busy CPUs is sufficient along with
     other tweaks optimizing the behaviour for asymmetric systems
     (big/little)"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Skip LLC NOHZ logic for asymmetric systems
  sched/fair: Tune down misfit NOHZ kicks
  sched/fair: Comment some nohz_balancer_kick() kick conditions
  sched/core: Fix buffer overflow in cgroup2 property cpu.max
  sched/cpufreq: Fix 32-bit math overflow

Pull perf updates from Thomas Gleixner:
 "A larger set of perf updates.

  Not all of them are strictly fixes, but that's solely the tip
  maintainers fault as they let the timely -rc1 pull request fall
  through the cracks for various reasons including travel. So I'm
  sending this nevertheless because rebasing and distangling fixes and
  updates would be a mess and risky as well. As of tomorrow, a strict
  fixes separation is happening again. Sorry for the slip-up.

  Kernel:

   - Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
     consumers of the mmap event get what they requested.

  Tools:

   - A larger set of updates to perf record/report/scripts vs. time
     stamp handling

   - More Python3 fixups

   - A pile of memory leak plumbing

   - perf BPF improvements and fixes

   - Finalize the perf.data directory storage"

[ Note: the kernel part is strictly a fix, the updates are purely to
  tooling       - Linus ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  perf bpf: Show more BPF program info in print_bpf_prog_info()
  perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
  perf tools: Save bpf_prog_info and BTF of new BPF programs
  perf evlist: Introduce side band thread
  perf annotate: Enable annotation of BPF programs
  perf build: Check what binutils's 'disassembler()' signature to use
  perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
  perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
  perf feature detection: Add -lopcodes to feature-libbfd
  perf top: Add option --no-bpf-event
  perf bpf: Save BTF information as headers to perf.data
  perf bpf: Save BTF in a rbtree in perf_env
  perf bpf: Save bpf_prog_info information as headers to perf.data
  perf bpf: Save bpf_prog_info in a rbtree in perf_env
  perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
  perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
  bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
  tools lib bpf: Introduce bpf_program__get_prog_info_linear()
  perf record: Replace option --bpf-event with --no-bpf-event
  perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
  ...

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Prevent potential NULL pointer dereferences in the HPET and HyperV
     code

   - Exclude the GART aperture from /proc/kcore to prevent kernel
     crashes on access

   - Use the correct macros for Cyrix I/O on Geode processors

   - Remove yet another kernel address printk leak

   - Announce microcode reload completion as requested by quite some
     people. Microcode loading has become popular recently.

   - Some 'Make Clang' happy fixlets

   - A few cleanups for recently added code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/gart: Exclude GART aperture from kcore
  x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
  x86/mm/pti: Make local symbols static
  x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
  x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
  x86/microcode: Announce reload operation's completion
  x86/hyperv: Prevent potential NULL pointer dereference
  x86/hpet: Prevent potential NULL pointer dereference
  x86/lib: Fix indentation issue, remove extra tab
  x86/boot: Restrict header scope to make Clang happy
  x86/mm: Don't leak kernel addresses
  x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header

Pull timer fixes from Thomas Gleixner:
 "A set of small fixes plus the removal of stale board support code:

   - Remove the board support code from the clpx711x clocksource driver.
     This change had fallen through the cracks and I'm sending it now
     rather than dealing with people who want to improve that stale code
     for 3 month.

   - Use the proper clocksource mask on RICSV

   - Make local scope functions and variables static"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/clps711x: Remove board support
  clocksource/drivers/riscv: Fix clocksource mask
  clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static
  clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static
  clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
  clocksource/drivers/clps711x: Make clps711x_clksrc_init() static
  time/jiffies: Make refined_jiffies static

Pull locking fixes from Thomas Gleixner:
 "Two small fixes:

   - Cure a recently introduces error path hickup which tries to
     unregister a not registered lockdep key in te workqueue code

   - Prevent unaligned cmpxchg() crashes in the robust list handling
     code by sanity checking the user space supplied futex pointer"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Ensure that futex address is aligned in handle_futex_death()
  workqueue: Only unregister a registered lockdep key

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem:

   - Remove secondary GIC support on systems w/o device-tree support

   - A set of small fixlets in various irqchip drivers

   - static and fall-through annotations

   - Kernel doc and typo fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Mark expected switch case fall-through
  genirq/devres: Remove excess parameter from kernel doc
  irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
  irqchip/mbigen: Don't clear eventid when freeing an MSI
  irqchip/stm32: Don't set rising configuration registers at init
  irqchip/stm32: Don't clear rising/falling config registers at init
  dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
  irqchip/mmp: Make mmp_irq_domain_ops static
  irqchip/brcmstb-l2: Make two init functions static
  genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
  irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
  irqchip/gic: Drop support for secondary GIC in non-DT systems
  irqchip/imx-irqsteer: Fix of_property_read_u32() error handling

Pull core fixes from Thomas Gleixner:
 "Two small fixes:

   - Move the large objtool_file struct off the stack so objtool works
     in setups with a tight stack limit.

   - Make a few variables static in the watchdog core code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog/core: Make variables static
  objtool: Move objtool_file struct off the stack

Pull thermal management fixes from Zhang Rui:

 - Fix a wrong __percpu structure declaration in intel_powerclamp driver
   (Luc Van Oostenryck)

 - Fix truncated name of the idle injection kthreads created by
   intel_powerclamp driver (Zhang Rui)

 - Fix the missing UUID supports in int3400 thermal driver (Matthew
   Garrett)

 - Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver
   (Phil Elwell)

 - A couple of trivial fixes/cleanups in some SoC thermal drivers

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/intel_powerclamp: fix truncated kthread name
  thermal: mtk: Allocate enough space for mtk_thermal.
  thermal/int340x_thermal: fix mode setting
  thermal/int340x_thermal: Add additional UUIDs
  thermal: cpu_cooling: Remove unused cur_freq variable
  thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs
  thermal: samsung: Fix incorrect check after code merge
  thermal/intel_powerclamp: fix __percpu declaration of worker_data

Pull smb3 fixes from Steve French:

 - two fixes for stable for guest mount problems with smb3.1.1

 - two fixes for crediting (SMB3 flow control) on resent requests

 - a byte range lock leak fix

 - two fixes for incorrect rc mappings

* tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  SMB3: Fix SMB3.1.1 guest mounts to Samba
  cifs: Fix slab-out-of-bounds when tracing SMB tcon
  cifs: allow guest mounts to work for smb3.11
  fix incorrect error code mapping for OBJECTID_NOT_FOUND
  cifs: fix that return -EINVAL when do dedupe operation
  CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
  CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN

Pull auxdisplay updates from Miguel Ojeda:
 "A few fixes and improvements for auxdisplay:

   - Series to fix a memory leak in hd44780 while introducing
     charlcd_free(). From Andy Shevchenko

   - Series to clean up the Kconfig menus and a couple of improvements
     for charlcd. From Mans Rullgard"

* tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux:
  auxdisplay: charlcd: make backlight initial state configurable
  auxdisplay: charlcd: simplify init message display
  auxdisplay: deconfuse configuration
  auxdisplay: hd44780: Convert to use charlcd_free()
  auxdisplay: panel: Convert to use charlcd_free()
  auxdisplay: charlcd: Introduce charlcd_free() helper
  auxdisplay: charlcd: Move to_priv() to charlcd namespace
  auxdisplay: hd44780: Fix memory leak on ->remove()

Pull SCSI fixes from James Bottomley:
 "Six fixes to four drivers and two core fixes.

  One core fix simply corrects a missed destroy_rcu_head() but the other
  is hopefully the end of an ongoing effort to make suspend/resume play
  nicely with scsi quiesce"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsi: Fix empty event pool access during host removal
  scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
  scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
  scsi: qla2xxx: Fix FC-AL connection target discovery
  scsi: core: Avoid that a kernel warning appears during system resume
  scsi: core: Also call destroy_rcu_head() for passthrough requests
  scsi: iscsi: flush running unbind operations when removing a session

Since board support for the CLPS711X platform was removed,
remove the board support from the clps711x-timer driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru

Pull io_uring fixes and improvements from Jens Axboe:
 "The first five in this series are heavily inspired by the work Al did
  on the aio side to fix the races there.

  The last two re-introduce a feature that was in io_uring before it got
  merged, but which I pulled since we didn't have a good way to have
  BVEC iters that already have a stable reference. These aren't
  necessarily related to block, it's just how io_uring pins fixed
  buffers"

* tag 'io_uring-20190323' of git://git.kernel.dk/linux-block:
  block: add BIO_NO_PAGE_REF flag
  iov_iter: add ITER_BVEC_FLAG_NO_REF flag
  io_uring: mark me as the maintainer
  io_uring: retry bulk slab allocs as single allocs
  io_uring: fix poll races
  io_uring: fix fget/fput handling
  io_uring: add prepped flag
  io_uring: make io_read/write return an integer
  io_uring: use regular request ref counts

Pull block fixes from Jens Axboe:
 "A set of fixes/changes that should go into this series. This contains:

   - Kernel doc / comment updates (Bart, Shenghui)

   - Un-export of core-only used function (Bart)

   - Fix race on loop file access (Dongli)

   - pf/pcd queue cleanup fixes (me)

   - Use appropriate helper for RESTART bit set (Yufen)

   - Use named identifier for classic poll (Yufen)"

* tag 'for-linus-20190323' of git://git.kernel.dk/linux-block:
  sbitmap: trivial - update comment for sbitmap_deferred_clear_bit
  blkcg: Fix kernel-doc warnings
  blk-iolatency: #include "blk.h"
  block: Unexport blk_mq_add_to_requeue_list()
  block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
  blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx
  loop: access lo_backing_file only when the loop device is Lo_bound
  blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART
  paride/pcd: cleanup queues when detection fails
  paride/pf: cleanup queues when detection fails

Pull ceph fixes from Ilya Dryomov:
 "A follow up for the new alloc_size logic and a blacklisting fix,
  marked for stable"

* tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client:
  rbd: drop wait_for_latest_osdmap()
  libceph: wait for latest osdmap in ceph_monc_blacklist_add()
  rbd: set io_min, io_opt and discard_granularity to alloc_size

The ext4 fstrim implementation uses the block bitmaps to find free space
that can be discarded.  If we haven't replayed the journal, the bitmaps
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere.  It seems fragile and hard to read, and we
may probably forget to release the buffer some day.  This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.

 - Create and mount an empty ext4 filesystem without extent and quota
   features,
 - quotacheck and enable the user & group quota,
 - Create some files and write some data to them, and then punch hole
   to some files of them, it may trigger the buffer leak problem
   mentioned above.
 - Disable quota and run quotacheck again, it will create two new
   aquota files and write the checked quota information to them, which
   probably may reuse the freed indirect block(the buffer and page
   cache was not freed) as data block.
 - Enable quota again, it will invoke
   vfs_load_quota_inode()->invalidate_bdev() to try to clean unused
   buffers and pagecache. Unfortunately, because of the buffer of quota
   data block is still referenced, quota code cannot read the up to date
   quota info from the device and lead to quota information corruption.

This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.

This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

With -Wimplicit-fallthrough added to CFLAGS:

 kernel/irq/manage.c: In function ‘irq_do_set_affinity’:
 kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   cpumask_copy(desc->irq_common_data.affinity, mask);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 kernel/irq/manage.c:199:2: note: here
   case IRQ_SET_MASK_OK_NOCOPY:
   ^~~~

Annotate it.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor

For all riscv architectures (RV32, RV64 and RV128), the clocksource
is a 64 bit incrementing counter.

Fix the clock source mask accordingly.

Tested on both 64bit and 32 bit virt machine in QEMU.

Fixes: 62b01943 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Anup Patel <Anup.Patel@wdc.com>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com

On machines where the GART aperture is mapped over physical RAM,
/proc/kcore contains the GART aperture range. Accessing the GART range via
/proc/kcore results in a kernel crash.

vmcore used to have the same issue, until it was fixed with commit
2a3e83c6 ("x86/gart: Exclude GART aperture from vmcore")', leveraging
existing hook infrastructure in vmcore to let /proc/vmcore return zeroes
when attempting to read the aperture region, and so it won't read from the
actual memory.

Apply the same workaround for kcore. First implement the same hook
infrastructure for kcore, then reuse the hook functions introduced in the
previous vmcore fix. Just with some minor adjustment, rename some functions
for more general usage, and simplify the hook infrastructure a bit as there
is no module usage yet.
Suggested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Dave Young <dyoung@redhat.com>
Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com

To 2.19
Signed-off-by: Steve French <stfrench@microsoft.com>

Workaround problem with Samba responses to SMB3.1.1
null user (guest) mounts.  The server doesn't set the
expected flag in the session setup response so we have
to do a similar check to what is done in smb3_validate_negotiate
where we also check if the user is a null user (but not sec=krb5
since username might not be passed in on mount for Kerberos case).

Note that the commit below tightened the conditions and forced signing
for the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
cases where there is no user (even if server forgets to set the flag
in the response) since we don't have anything useful to sign with.
This is especially important now that the more secure SMB3.1.1 protocol
is in the default dialect list.

An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed
the guest mounts to Windows.

    Fixes: 6188f28b ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

This patch fixes the following KASAN report:

[  779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180
[  779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812

[  779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62
[  779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
[  779.044761] Call Trace:
[  779.044769]  dump_stack+0x5b/0x90
[  779.044775]  ? string+0xab/0x180
[  779.044781]  print_address_description+0x6c/0x23c
[  779.044787]  ? string+0xab/0x180
[  779.044792]  ? string+0xab/0x180
[  779.044797]  kasan_report.cold.3+0x1a/0x32
[  779.044803]  ? string+0xab/0x180
[  779.044809]  string+0xab/0x180
[  779.044816]  ? widen_string+0x160/0x160
[  779.044822]  ? vsnprintf+0x5bf/0x7f0
[  779.044829]  vsnprintf+0x4e7/0x7f0
[  779.044836]  ? pointer+0x4a0/0x4a0
[  779.044841]  ? seq_buf_vprintf+0x79/0xc0
[  779.044848]  seq_buf_vprintf+0x62/0xc0
[  779.044855]  trace_seq_printf+0x113/0x210
[  779.044861]  ? trace_seq_puts+0x110/0x110
[  779.044867]  ? trace_raw_output_prep+0xd8/0x110
[  779.044876]  trace_raw_output_smb3_tcon_class+0x9f/0xc0
[  779.044882]  print_trace_line+0x377/0x890
[  779.044888]  ? tracing_buffers_read+0x300/0x300
[  779.044893]  ? ring_buffer_read+0x58/0x70
[  779.044899]  s_show+0x6e/0x140
[  779.044906]  seq_read+0x505/0x6a0
[  779.044913]  vfs_read+0xaf/0x1b0
[  779.044919]  ksys_read+0xa1/0x130
[  779.044925]  ? kernel_write+0xa0/0xa0
[  779.044931]  ? __do_page_fault+0x3d5/0x620
[  779.044938]  do_syscall_64+0x63/0x150
[  779.044944]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  779.044949] RIP: 0033:0x7f62c2c2db31
[ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02
02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0
0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48
89
[  779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31
[  779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[  779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[  779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003
[  779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710
[  779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000

[  779.044981] Allocated by task 1257:
[  779.044987]  __kasan_kmalloc.constprop.5+0xc1/0xd0
[  779.044992]  kmem_cache_alloc+0xad/0x1a0
[  779.044997]  getname_flags+0x6c/0x2a0
[  779.045003]  user_path_at_empty+0x1d/0x40
[  779.045008]  do_faccessat+0x12a/0x330
[  779.045012]  do_syscall_64+0x63/0x150
[  779.045017]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  779.045019] Freed by task 1257:
[  779.045023]  __kasan_slab_free+0x12e/0x180
[  779.045029]  kmem_cache_free+0x85/0x1b0
[  779.045034]  filename_lookup.part.70+0x176/0x250
[  779.045039]  do_faccessat+0x12a/0x330
[  779.045043]  do_syscall_64+0x63/0x150
[  779.045048]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  779.045052] The buggy address belongs to the object at ffff88814f326600
which belongs to the cache names_cache of size 4096
[  779.045057] The buggy address is located 872 bytes to the right of
4096-byte region [ffff88814f326600, ffff88814f327600)
[  779.045058] The buggy address belongs to the page:
[  779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0
[  779.045067] flags: 0x200000000010200(slab|head)
[  779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40
[  779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  779.045083] page dumped because: kasan: bad access detected

[  779.045085] Memory state around the buggy address:
[  779.045089]  ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045093]  ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045099]                                                           ^
[  779.045103]  ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045107]  ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045109] ==================================================================
[  779.045110] Disabling lock debugging due to kernel taint

Correctly assign tree name str for smb3_tcon event.
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>

Fix Guest/Anonymous sessions so that they work with SMB 3.11.

The commit noted below tightened the conditions and forced signing for
the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
Guest/Anonumous sessions.

Fixes: 6188f28b ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

It was mapped to EIO which can be confusing when user space
queries for an object GUID for an object for which the server
file system doesn't support (or hasn't saved one).

As Amir Goldstein suggested this is similar to ENOATTR
(equivalently ENODATA in Linux errno definitions) so
changing NT STATUS code mapping for OBJECTID_NOT_FOUND
to ENODATA.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Amir Goldstein <amir73il@gmail.com>

dedupe_file_range operations is combiled into remap_file_range.
But it's always skipped for dedupe operations in function
cifs_remap_file_range.

Example to test:
Before this patch:
  # dd if=/dev/zero of=cifs/file bs=1M count=1
  # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
  XFS_IOC_FILE_EXTENT_SAME: Invalid argument

After this patch:
  # dd if=/dev/zero of=cifs/file bs=1M count=1
  # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
  XFS_IOC_FILE_EXTENT_SAME: Operation not supported

Influence for xfstests:
generic/091
generic/112
generic/127
generic/263
These tests report this error "do_copy_range:: Invalid
argument" instead of "FIDEDUPERANGE: Invalid argument".
Because there are still two bugs cause these test failed.
https://bugzilla.kernel.org/show_bug.cgi?id=202935
https://bugzilla.kernel.org/show_bug.cgi?id=202785Signed-off-by: Xiaoli Feng <fengxiaoli0714@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

When sending a rdata, transport may return -EAGAIN. In this case
we should re-obtain credits because the session may have been
reconnected.

Change in v2: adjust_credits before re-sending
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>