Skip to content

L
linux
Switch branch/tag
  1. 13 Jul, 2012 5 commits
  3. 27 Jun, 2012 4 commits
  5. 23 Jun, 2012 1 commit
  7. 21 Jun, 2012 10 commits
  9. 20 Jun, 2012 2 commits
  11. 14 Jun, 2012 3 commits
    • Vinod Koul's avatar
      Merge branch 'fixes' into next · 0a076035
      Vinod Koul authored
      0a076035
    • Linus Walleij's avatar
      dma: coh901318: use devm allocation · f7ceb362
      Linus Walleij authored 
      Allocate memory, region, remap and irq for device state using
devm_* helpers to simplify memory accounting.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarVinod Koul <vinod.koul@linux.intel.com>
      f7ceb362
    • Javi Merino's avatar
      DMA: PL330: Fix racy mutex unlock · fdec53d5
      Javi Merino authored 
      pl330_update() stores a pointer to the thrd->req that finished, which
contains a pointer to the corresponding pl330_req.  This is done with
the pl330_lock held.  Then, it iterates through the req_done list,
calling the callback for each of the requests that are done.  The
problem is that the driver releases the lock before calling the
callback for each of the callbacks.  pl330_submit_req() running in
another processor can then acquire the lock and insert another request
in one of the thrd->req that hasn't been processed yet, replacing the
pointer to pl330_req there.  When the callback returns in
pl330_update() and the next rqdone is popped from the list, it
dereferences the pl330_req pointer to the just scheduled pl330_req,
instead of the one that has finished, calling pl330 with the wrong r.

This patch fixes this by storing the pointer to pl330_req directly in
the list.
Signed-off-by: default avatarJavi Merino <javi.merino@arm.com>
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: default avatarJassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: default avatarVinod Koul <vinod.koul@linux.intel.com>
      fdec53d5
  13. 12 Jun, 2012 1 commit
  15. 08 Jun, 2012 2 commits
  17. 07 Jun, 2012 4 commits
  19. 03 Jun, 2012 2 commits
  21. 02 Jun, 2012 6 commits
    • Joe Thornber's avatar
      dm thin: provide userspace access to pool metadata · cc8394d8
      Joe Thornber authored 
      This patch implements two new messages that can be sent to the thin
pool target allowing it to take a snapshot of the _metadata_.  This,
read-only snapshot can be accessed by userland, concurrently with the
live target.

Only one metadata snapshot can be held at a time.  The pool's status
line will give the block location for the current msnap.

Since version 0.1.5 of the userland thin provisioning tools, the
thin_dump program displays the msnap as follows:

    thin_dump -m <msnap root> <metadata dev>

Available here: https://github.com/jthornber/thin-provisioning-tools

Now that userland can access the metadata we can do various things
that have traditionally been kernel side tasks:

     i) Incremental backups.

     By using metadata snapshots we can work out what blocks have
     changed over time.  Combined with data snapshots we can ensure
     the data doesn't change while we back it up.

     A short proof of concept script can be found here:

     https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb

     ii) Migration of thin devices from one pool to another.

     iii) Merging snapshots back into an external origin.

     iv) Asyncronous replication.
Signed-off-by: default avatarJoe Thornber <ejt@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      cc8394d8
    • Mike Snitzer's avatar
      dm thin: use slab mempools · a24c2569
      Mike Snitzer authored 
      Use dedicated caches prefixed with a "dm_" name rather than relying on
kmalloc mempools backed by generic slab caches so the memory usage of
thin provisioning (and any leaks) can be accounted for independently.
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      a24c2569
    • Mikulas Patocka's avatar
      dm mpath: allow ioctls to trigger pg init · 35991652
      Mikulas Patocka authored 
      After the failure of a group of paths, any alternative paths that
need initialising do not become available until further I/O is sent to
the device.  Until this has happened, ioctls return -EAGAIN.

With this patch, new paths are made available in response to an ioctl
too.  The processing of the ioctl gets delayed until this has happened.

Instead of returning an error, we submit a work item to kmultipathd
(that will potentially activate the new path) and retry in ten
milliseconds.

Note that the patch doesn't retry an ioctl if the ioctl itself fails due
to a path failure.  Such retries should be handled intelligently by the
code that generated the ioctl in the first place, noting that some SCSI
commands should not be retried because they are not idempotent (XOR write
commands).  For commands that could be retried, there is a danger that
if the device rejected the SCSI command, the path could be errorneously
marked as failed, and the request would be retried on another path which
might fail too.  It can be determined if the failure happens on the
device or on the SCSI controller, but there is no guarantee that all
SCSI drivers set these flags correctly.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      35991652
    • Mike Christie's avatar
      dm mpath: delay retry of bypassed pg · f220fd4e
      Mike Christie authored 
      If I/O needs retrying and only bypassed priority groups are available,
set the pg_init_delay_retry flag to wait before retrying.

If, for example, the reason for the bypass is that the controller is
getting reset or there is a firmware upgrade happening, retrying right
away would cause a flood of log messages and retries for what could be a
few seconds or even several minutes.
Signed-off-by: default avatarMike Christie <michaelc@cs.wisc.edu>
Acked-by: default avatarMike Snitzer <snitzer@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      f220fd4e
    • Mike Snitzer's avatar
      dm mpath: reduce size of struct multipath · 1fbdd2b3
      Mike Snitzer authored 
      Move multipath structure's 'lock' and 'queue_size' members to eliminate
two 4-byte holes.  Also use a bit within a single unsigned int for each
existing flag (saves 8-bytes).  This allows future flags to be added
without each consuming an unsigned int.
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Acked-by: default avatarHannes Reinecke <hare@suse.de>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      1fbdd2b3
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4fc3acf2
      Linus Torvalds authored 
      Pull networking updates from David Miller:

 1) Make syn floods consume significantly less resources by

    a) Not pre-COW'ing routing metrics for SYN/ACKs
    b) Mirroring the device queue mapping of the SYN for the SYN/ACK
       reply.

    Both from Eric Dumazet.

 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA.

 3) Validate the length requested when building a paged SKB for a
    socket, so we don't overrun the page vector accidently.  From Jason
    Wang.

 4) When netlabel is disabled, we abort all IP option processing when we
    see a CIPSO option.  This isn't the right thing to do, we should
    simply skip over it and continue processing the remaining options
    (if any).  Fix from Paul Moore.

 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel
    Apfelbaum.

 6) 8139cp enables the receiver before the ring address is properly
    programmed, which potentially lets the device crap over random
    memory.  Fix from Jason Wang.

 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer
    address reference in jumbo RX frame processing from Bruce Allan and
    Sebastian Andrzej Siewior, respectively.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fec_mpc52xx: fix timestamp filtering
  mcs7830: Implement link state detection
  e1000e: fix Rapid Start Technology support for i217
  e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
  r8169: call netif_napi_del at errpaths and at driver unload
  tcp: reflect SYN queue_mapping into SYNACK packets
  tcp: do not create inetpeer on SYNACK message
  8139cp/8139too: terminate the eeprom access with the right opmode
  8139cp: set ring address before enabling receiver
  cipso: handle CIPSO options correctly when NetLabel is disabled
  net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
  bql: Avoid possible inconsistent calculation.
  bql: Avoid unneeded limit decrement.
  bql: Fix POSDIFF() to integer overflow aware.
  net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP
  net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap
  net/mlx4_core: Fixes for VF / Guest startup flow
  net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event
  net/mlx4_core: Fix number of EQs used in ICM initialisation
  net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
      4fc3acf2
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7