- 17 Oct, 2018 4 commits
-
-
Jani Nikula authored
Reduce intel_display.c by splitting out intel_quirks.c. No functional changes. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016144228.18267-1-jani.nikula@intel.com
-
Jani Nikula authored
Clang build with UBSAN enabled leads to the following build error: drivers/gpu/drm/i915/intel_engine_cs.o: In function `intel_engine_init_execlist': drivers/gpu/drm/i915/intel_engine_cs.c:411: undefined reference to `__compiletime_assert_411' Again, for this to work the code would first need to be inlined and then constant folded, which doesn't work for Clang because semantic analysis happens before optimization/inlining. Use GEM_BUG_ON() instead of BUILD_BUG_ON(). v2: Use is_power_of_2() from log2.h (Chris) References: http://mid.mail-archive.com/20181015203410.155997-1-swboyd@chromium.orgReported-by:
Stephen Boyd <swboyd@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Nathan Chancellor <natechancellor@gmail.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Jani Nikula authored
When building the kernel with Clang with defconfig and CONFIG_64BIT disabled, vmlinux fails to link because of the BUILD_BUG in _print_param. ld: drivers/gpu/drm/i915/i915_params.o: in function `i915_params_dump': i915_params.c:(.text+0x56): undefined reference to `__compiletime_assert_191' This function is semantically invalid unless the code is first inlined then constant folded, which doesn't work for Clang because semantic analysis happens before optimization/inlining. [The above written by Nathan Chancellor <natechancellor@gmail.com>] Use WARN_ONCE() instead of BUILD_BUG() to avoid the problem. The WARN_ONCE() should get optimized away unless there's a type that's not handled by _print_param(). References: https://github.com/ClangBuiltLinux/linux/issues/191 References: http://mid.mail-archive.com/20181009171401.14980-1-natechancellor@gmail.com Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
-
Jani Nikula authored
Rename intel_get_pipe_from_connector() to intel_connector_get_pipe() and move it near its connector function friends in intel_connector.c. No functional changes. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 16 Oct, 2018 20 commits
-
-
Mahesh Kumar authored
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21. Create a function to choose correct clk-off bit. v2: Add fixes tag (Lucas) Fixes: c27e917e ("drm/i915/icl: add basic support for the ICL clocks") Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com
-
Lucas De Marchi authored
combo-phy register instances are at same offset from base for each combo-phy port, i.e. Port A base offset: 0x16200 Port B base offset: 0x6C000 All the other addresses for both ports can be derived by calculating offset to these base addresses. PORT_CL_DW_OFFSET 0x0 PORT_CL_DW<x> 0 + x * 4 PORT_COMP_OFFSET 0x100 PORT_COMP_DW<x> 0x100 + x * 4 PORT_PCS_AUX_OFFSET 0x300 PORT_PCS_GRP_OFFSET 0x600 PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100 PORT_TX_AUX_OFFSET 0x380 PORT_TX_GRP_OFFSET 0x680 PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100 And inside each PORT_TX_[AUX|GRP|LN] we add `dw * 4`. Based on original patch by Mahesh Kumar <mahesh1.kumar@intel.com>. v2: make port, dw and ln arguments follow the order in register's name Signed-off-by: -
Mahesh Kumar authored
This patch combines CNL/ICL specific port/combophy macros together at one location. This is prework for patches later in series where new macros to find port/combophy register will be introduced. v2: remove wrong empty line Signed-off-by:
-
Vandita Kulkarni authored
This patch adds helper function for identifying whether the given PLL is combo PHY PLL or not. This helper function is used inside various ICL functions to make them scalable. Signed-off-by:
-
Vandita Kulkarni authored
Use intel_port_is_tc and intel_port_is_combophy functions to replace the individual port checks from port C to F and port A to B respectively. Signed-off-by:
-
Vandita Kulkarni authored
Use the existing port-to-id helper function, to refactor hence making it scalable. Signed-off-by:
-
Mahesh Kumar authored
Instead of directly comparing HPD pins use intel_port_is_combophy/tc helper functions to distinguish between combophy/TC ports. Signed-off-by:
-
Mahesh Kumar authored
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports. Changes since V1: - keep all intel_port_is_* helper together (Lucas) Signed-off-by:
-
Lucas De Marchi authored
Display WA #1178 is meant to fix Aux channel voltage swing too low with some type C dongles. It applies to external ports on combo phy. On Icelake this is port A and B when those are not eDP. v2: follow the spec to the letter: include Aux A and just check if it's not eDP instead of checking only for Aux B. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
We have to look at crtc_state, so pass that instead. Also cleanup the use of dev vs dev_priv, we really want to pass along dev_priv. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Maarten Lankhorst authored
Instead of derferencing crtc->config, look at crtc_state. Signed-off-by:
-
Maarten Lankhorst authored
The CRTC is idle at this point, so we can dereference crtc->state safely. Signed-off-by:
-
Maarten Lankhorst authored
We know the crtc is idle because we're at the beginning of sanitization, so just dereference crtc->state instead. Signed-off-by:
-
Maarten Lankhorst authored
No need to look at crtc->config when we have crtc_state in the caller. Signed-off-by:
-
Maarten Lankhorst authored
has_drrs is a flag we can't read out. We set it when seamless DRRS is enabled in pipe_config, so intel_dump_pipe_config() and intel_pipe_config_compare() will continue to do the right thing when has_drrs is set on the real state. This removes one more dereference of crtc->config. While at it, fixup the comment and also read out M2_N2 for CHV, since we program it in the set_m_n function. Changes since v1: - Only read out M2/N2 on platforms that support DRRS. Signed-off-by:
-
Maarten Lankhorst authored
We already have a perfectly nice pipe_config, use that instead. Signed-off-by:
-
Maarten Lankhorst authored
Another user of crtc->config gone. The functions it calls also needed crtc->config, so convert those as well. Signed-off-by:
-
Mika Kuoppala authored
Disable master interrupt before reading level indications. This will close a race where we get a level indication between reading and disabling, generating an extra interrupt where we could have avoided one. Further, as the reading acts also as a post, replace the write/post on the irq reset with the helper. On enabling side, posting doesn't serve any purpose so it can also be replaced with helper. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-3-mika.kuoppala@linux.intel.com
-
Mika Kuoppala authored
All other master control register bits, except the enable, are read only and they are level indications of the second level interrupt status. Only touch enable bit and rectify the comment. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-2-mika.kuoppala@linux.intel.com
-
Mika Kuoppala authored
Disable master interrupt before reading level indications. This will close a race where we get a level indication between reading and disabling, generating an extra interrupt where we could have avoided one. Further, as the reading acts also as a post, replace the write/post on the irq reset with the helper. On enabling side, posting doesn't serve any purpose so it can also be replaced with helper. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 15 Oct, 2018 11 commits
-
-
Mahesh Kumar authored
Enable SAGV for ICL platform. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Tested-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Chris Wilson authored
Since we peek into HW state and poke around, it behoves us to acquire a runtime pm wakeref beforehand. References: https://bugs.freedesktop.org/show_bug.cgi?id=108343 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108364Signed-off-by:
-
Shashank Sharma authored
LSPCON chips can generate YCBCR outputs, if asked nicely :). In order to generate YCBCR 4:2:0 outputs, a source must: - send YCBCR 4:4:4 signals to LSPCON - program color space as 4:2:0 in AVI infoframes Whereas for YCBCR 4:4:4 outputs, the source must: - send YCBCR 4:4:4 signals to LSPCON - program color space as 4:4:4 in AVI infoframes So for both 4:2:0 as well as 4:4:4 outputs, we are driving the pipe for YCBCR 4:4:4 output, but AVI infoframe's color space information indicates LSPCON FW to start scaling down from YCBCR 4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by LSPCON device, we need not to reserve a scaler for 4:2:0 outputs. V2: rebase V3: Addressed review comments from Ville - add enum crtc_output_format instead of bool ycbcr420 - use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output cases in this way we will have YCBCR 4:4:4 framework ready (except the ABI part) V4: Added r-b from Maarten (for v3) Addressed review comments from Ville: - Do not add a non-atomic state variable to determine lspcon output. Instead add bool in CRTC state to indicate lspcon based scaling. V5: Addressed review comments from Ville: - Change the state bool name from external scaling to something more relavent. - Keep the info and adjusted_mode structures const. - use crtc_state instead of pipe_config. - Push all the config change into lspcon_ycbcr420_config function. V6: Rebase, small changes to accommodate changes in patch 2. V7: Fixed checkpatch warnings for alignment V8: Rebase PS: Ignored following warnings to match the current formatting: drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON -:53: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #53: FILE: drivers/gpu/drm/i915/i915_reg.h:8721: +#define TRANS_MSA_SAMPLING_444 (2<<1) ^ -:54: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #54: FILE: drivers/gpu/drm/i915/i915_reg.h:8722: +#define TRANS_MSA_CLRSP_YCBCR (2<<3) V9: Rebase V10: Rebase V11: Rebase Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
Shashank Sharma authored
Different LSPCON vendors specify their custom methods to pass AVI infoframes to the LSPCON chip, so does Parade tech. This patch adds functions to arrange and write AVI infoframes into Parade LSPCON chips. V2: rebase V3: Added r-b from Maarten V4: rebase V5: rebase V6: rebase V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Rebase V10: Rebase Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Shashank Sharma authored
LSPCON is a DP branch device, so LSPCON vendors define specific methods to pass AVI infoframes to the the chip. This patch adds: - a generic wrapper function for writing AVI infoframes for all LSPCON devices. - a vendor specific function to wrire AVI infoframes into MCA LSPCON devices. V2: Rebase V3: Added r-b from Maarten V4: Rebase V5: Rebase V6: Rebase V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Added the retry logic, with 50ms incremental delays while writing AVI IF V10: Changed the return value check V11: Fixed checkpatch warning V12: Rebase Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Shashank Sharma authored
In order to pass AVI infoframes to LSPCON devices, a source has to write them in a vendor recommended method and location. This patch series: - adds generic LSPCON infoframe setup functions. - registers these functions into existing AVI infoframe framework. - triggers these functions from modeset sequence. Next patches in the series will add vendor specific code. V2: Added new parameter to align with new definition of drm_hdmi_avi_infoframe_quant_range V3: Added r-b from Maarten (for V2) Added new parameter output_format in struct lspcon to accommodate Ville's review comments on last patch of the series V4: Addressed Ville's review comment - Do not add output_format in LSPCON state, as its non-atomic. Add this into CRTC state (added in a later patch). V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase V11: Accommodated rebasing changes in intel_git_port fptrs (set_infoframes and infoframe_enabled) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Shashank Sharma authored
Intel LSPCON chip is provided by 2 vendors: - Megachips America (MCA) - Parade technologies (Parade tech) Its important to know the vendor of this chip, as the address to write AVI infoframes is different for those two. This patch reads the vendor OUI signature, and marks into LSPCON encoder structure for future usages. This patch also does a small re-arrangement of the code, by moving lspcon mode change into probe function. V2: Use dp->desc for OUI detection, dont add a helper for this (Ville) V3: Rebase, Added r-b from Maarten V4: Rebase V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Shashank Sharma authored
This patch adds support for YCBCR 4:4:4 CRTC output format. To do this, this patch extends the existing YCBCR 4:2:0 framework by: - Adding new parameter in for YCBCR 4:4:4 enum crtc_iutput_format. - Adding case for YCBCR 4:4:4 in while setting AVI infoframes. - Adding necessary checks in modeset sequence. V3: Added this patch in the series V4: Added r-b from Maarten (for v3) Addressed review comment from Ville: Do not use (config->output_format > CRTC_OUTPUT_RGB) V5: Rebase V6: Rebase and small change, to accommodate changes in patch 2 V7: Fixed checkpatch alignment warnings V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comment from Ville Missing output_format_str[INTEL_OUTPUT_FORMAT_YCBCR444] Added Ville's R-B. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Shashank Sharma authored
Currently, we are using a bool in CRTC state (state->ycbcr420), to indicate modeset, that the output format is YCBCR 4:2:0. Now in order to support other YCBCR formats, we will need more such flags. This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the CRTC output formats and then plugs it during the modeset. V3: Added this patch in the series, to address review comments from second patchset. V4: Added r-b from Maarten (on v3) Addressed review comments from Ville: - Change the enum name to intel_output_format. - Start the enum value (INVALID) from 0 instaed of 1. - Set the crtc's output_format to RGB in encoder's compute_config. V5: Broke previous patch 1 into two parts, - first patch to add CRTC output format in general - second patch (this one) to add YCBCR 4:2:0 output format specifically. - Use ARRAY_SIZE(format_str) for output format validity check (Ville) V6: Added a separate function to calculate crtc_state->output_format, and calling it from various get_config function (Fix CI build warning) V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comments from Ville: - Change check for CRTC output format from > ARRAY_SIZE to >= ARRAY_SIZE. - Check for values < INTEL_OUTPUT_FORMAT_RGB is unnecessary. - No need to get CRTC YCBCR config, for pre-BDW functions. Added Ville's r-b. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: -
Shashank Sharma authored
This patch adds an enum "intel_output_format" to represent the output format of a particular CRTC. This enum will be used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format during the atomic modeset calculations. V5: - Created this separate patch to introduce and init output_format. - Initialize parameters of output_format_str respectively (Jani N). - Call it intel_output_format than crtc_output_format(Ville). - Set output format in pipe_config for every encoder (Ville). - Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville) V6: Rebase V7: Fixed alignment warnings (checkpatch) V8: Another check[atch warning for alignment V9: Rebase V10: Rebase on top of DSI restructure V11: Addressed review comment from Ville - Set CRTC format for pre-HSW get_pipe_config() function too. Added Ville's R-B Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: -
Chris Wilson authored
Handle integer overflow when computing the sub-page length for shmem backed pread/pwrite. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
- 12 Oct, 2018 1 commit
-
-
Jyoti Yadav authored
DC5 and DC6 counter register tells about residency of DC5 and DC6. Added the same in debugfs file. v2 : Remove csr_version check. Added generic check regarding DC counters for Gen9 onwards. (Rodrigo) v3 : Simplified gen checks. (Chris) v4 : Simplified "if" ladder for multiple gens. v5 : Removed unnecessary comment. Signed-off-by:Jyoti Yadav <jyoti.r.yadav@intel.com> Reviewed-by:
-
- 11 Oct, 2018 4 commits
-
-
Paulo Zanoni authored
This message is currently marked as DRM_DEBUG_ATOMIC. I would like it to be DRM_DEBUG_KMS since it is more KMS than atomic, and this will also make the message appear in the CI logs, which may or may not help us with some FIFO underrun bugs. Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Paulo Zanoni authored
We were writing to PLANE_BUF_CFG(pipe, plane_id) twice for every platform, and we were even using different values on the gen10- planar case. The first write is useless since it just gets replaced with the next one, so kill it. There's a lot to improve in the DDB code, but let's start by avoiding the double write. Reviewed-by:
-
Paulo Zanoni authored
The transition watermarks ask for Selected Result Blocks (the real value), not Result Blocks (the integer value). Given how ceilings are applied in both the non-transition and the transition watermarks calculations, we can get away with assuming that Selected Result Blocks is actually Result Blocks minus 1 without any rounding errors. Reviewed-by:
-
Paulo Zanoni authored
On these platforms we're supposed to unconditonally pick the method 2 result instead of the minimum. Reviewed-by:
-
