- 28 Jan, 2011 30 commits
-
-
Stanislaw Gruszka authored
Similar change as we already do for agn, need to avoid "Error setting Tx power (-5)" message when loading module. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Mac80211 can request for tx power and channel change in one ->config call. If that happens, *_send_tx_power functions will try to setup tx power for old channel, what can be not correct because we already change the band. I.e error "Failed to get channel info for channel 140 [0]", can be printed frequently when operating in software scanning mode. Signed-off-by:
-
Julia Lawall authored
genlmsg_cancel subtracts some constants from its second argument before calling nlmsg_cancel. nlmsg_cancel then calls nlmsg_trim on the same arguments. nlmsg_trim tests for NULL before doing any computation, but a NULL second argument to genlmsg_cancel is no longer NULL due to the initial subtraction. Nothing else happens in this execution, so the call to genlmsg_cancel is simply unnecessary in this case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression data; @@ if (data == NULL) { ... * genlmsg_cancel(..., data); ... return ...; } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Bruno Randolf authored
The register definition for retry configuration on AR5212 was wrong, and simply copied over from AR5210. Update the register definitions from the documentation. Let the short and long retries be configured from mac80211 and use the standard values of 7 and 4 by default. Also we need to make sure we don't export more retries than we are configured for to mac80211 (and the rate module) in hw->max_rate_tries. Also clean up the code by removing unused defines and variables and drop the different values for "station retries" - if these need to be different it can be handled tru ah_retry_long/short. Signed-off-by:
Bruno Randolf <br1@einfach.org> Signed-off-by:
-
Ben Greear authored
Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Rajkumar Manoharan authored
Signed-off-by:
Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by:
-
Johannes Berg authored
This adds the MCS information we currently get from the drivers into radiotap. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Vivek Natarajan authored
Change from the systems team to update PMU setting for AR9485 version of chipsets. Signed-off-by:
Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by:
-
Vivek Natarajan authored
Spin_lock has been tried to be acquired twice from ath9k_tasklet to ath_reset which resulted in a machine freeze. Signed-off-by:
-
Vivek Natarajan authored
Updates from the analog team for AR9485 chipsets to set DDR_PLL2 and DDR_PLL3. Also program the BB_PLL ki and kd value. Signed-off-by:
-
Vivek Natarajan authored
When this PLL hang issue is seen, both Rx and Tx fail to work. The sqsum_dvc needs to be below 2000 for a good chip. During this issue the sqsum_dvc value is beyond 80000 and only a full reset can solve this problem. Signed-off-by:
-
Vivek Natarajan authored
Add a function to observe the delta VC of BB_PLL. For a good chip, the sqsum_dvc is below 2000. Signed-off-by:
-
Sujith Manoharan authored
The HW has separate filter masks for compressed/uncompressed BlockAcks and BlockAckRequests. Add them. Signed-off-by:
Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Felix Fietkau authored
With this change, less CPU time is spent trying to look for consecutive pages for rx skbs. This also reduces the socket memory required for IP/UDP reassembly. Only two buffers per frame are supported. Frames spanning more buffers will be dropped, but the buffer size is enough to handle the required AMSDU size. Signed-off-by:
Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Sujith Manoharan authored
Commit "ath9k_hw: move AR9280 PCI EEPROM fix to eeprom_def.c" changed the behavior of INI overriding which is needed only for PCI cards. Revert to the original check. Signed-off-by:
-
Sujith Manoharan authored
Commit "ath9k_hw: Relocate Opmode initialization" moved the opmode initialization before the STA_ID1 register was programmed with defaults. This changed the original behaviour because the re-programming code doesn't take into account the existing value in the register. Both ath9k and ath9k_htc were not affected by this change because the opmode is re-initialized after every reset, when RX is started. Revert to the original behavior, except keep it outside the REGWRITE block. This would help remove extraneous opmode calls in the driver core. Signed-off-by:
-
Juuso Oikarinen authored
Some vendor specific cipher suites require non-zero key indexes for pairwise keys, but as of currently, the cfg80211 does not allow it. As validating they cipher parameters for vendor specific cipher suites is the job of the driver or hardware/firmware, change the cfg80211 to allow also non-zero pairwise key indexes for vendor specific ciphers. Signed-off-by:
Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by:
-
Bob Copeland authored
Now that rx and tx dumps go through the tracing infrastructure, we no longer need to keep these routines around. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Acked-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
-
Bob Copeland authored
This adds a few tracepoints to ath5k driver transmit and receive callbacks in order to record packet traffic. We record the entire packet in the trace buffer so that the data can be extracted with trace-cmd and external plugins. Compared to the previous debugging calls, this approach removes an out-of-line function call from the tx and rx paths in the compiled-in-but-disabled case, while improving the ability to process the logged data. A new option, CONFIG_ATH5K_TRACER, is added so that one may disable the tracepoints completely. Signed-off-by:
-
Bruno Randolf authored
IEEE80211_WEP_NKID is not used in ath9k any more since the key handling code has been moved to ath/. Signed-off-by:
-
Bruno Randolf authored
This enables 4.9GHz frequencies in ath5k if they are allowed as indicated by the regulatory domain code. Currently this is MKK9_MKKC (0xfe). Signed-off-by:
-
Bruno Randolf authored
This adds a helper function to ath/regd.c which can be asked if 4.9GHz channels are allowed for a given regulatory domain code. This keeps the knowledge of regdomains and defines like MKK9_MKKC in one place. I'm passing the regdomain code instead of the ath_regulatory structure because this needs to be called quite early in the driver inititalization where ath_regulatory is not available yet in ath5k. I'm using MKK9_MKKC only because this is the regdomain in the 802.11j enabled sample cards we got from our vendor. I found some hints in HAL code that this is used by Atheros to indicate 4.9GHz channels support and that there might be other domain codes as well, but as I don't have any documentation I'm just putting in what I need right now. It can be extended later. Signed-off-by:
-
Bruno Randolf authored
Shorten some lines and make code more readable. Signed-off-by:
-
Felix Fietkau authored
Various places printing tx queue information used various different ways to get a tx queue index for printing statistics. Most of these ways were wrong. ATH_TXQ_AC_* cannot be used as an index for sc->tx.txq, because it is only used internally for queue assignment. One place used WME_AC_* as a queue index for sc->debug.stats.txstats, however this array uses the ath9k_hw queue number as well. Fix all of this by always using the ath9k_hw queue number as an index, and always looking it up by going through sc->tx.txq_map. Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
It does not make much sense to keep the current virtual wiphy implementation any longer - it adds significant complexity, has very few users and is still very experimental. At some point in time, it will be replaced by a proper implementation in mac80211. By making the code easier to read and maintain, removing virtual wiphy support helps with fixing the remaining driver issues and adding further improvements. Signed-off-by:
-
Felix Fietkau authored
Instead of spreading ath_wake_mac80211_queue() calls over multiple places in the tx path that process the tx queue for completion, call it only where the pending frames counter gets decremented, eliminating some redundant checks. To prevent queue draining from waking the queues prematurely (e.g. during a hardware reset), reset the queue stop state when draining all queues, as the caller in main.c will run ieee80211_wake_queues(hw) anyway. Signed-off-by:
-
-
- 27 Jan, 2011 4 commits
-
-
Felix Fietkau authored
The commit 'ath9k: Add more information to debugfs xmit file.' added more debug counters to ath9k and also added some lines of code to ath9k_hw. Since ath9k_hw is also used by ath9k_htc, its code must not depend on ath9k data structures. In this case it was not fatal, but it's still wrong, so the code needs to be moved back to ath9k. Signed-off-by:
-
Christian Lamparter authored
"mac80211 will properly assign sequence numbers to QoS-data frames but cannot do so correctly for non-QoS-data and management frames because beacons need them from that counter as well and mac80211 cannot guarantee proper sequencing." Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Christian Lamparter authored
Signed-off-by:
-
Christian Lamparter authored
This patch syncs up the header files with the project's main firmware carl9170fw.git. Signed-off-by:
-
- 26 Jan, 2011 3 commits
-
-
Mohammed Shafi Shajakhan authored
Remove unused macros and cleanup buffer_type enumeration Signed-off-by:
Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by:
-
Johannes Berg authored
For events that include only the local struct as their parameter, we can use DECLARE_EVENT_CLASS and save quite some binary size across segments as well lines of code. text data bss dec hex filename 375745 19296 916 395957 60ab5 mac80211.ko.before 367473 17888 916 386277 5e4e5 mac80211.ko.after -8272 -1408 0 -9680 -25d0 delta Some more tracepoints with identical arguments could be combined like this but for now this is the one that benefits most. Signed-off-by:
-
John W. Linville authored
Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
-
- 25 Jan, 2011 3 commits
-
-
Bruno Randolf authored
Remove useless test_bit - it's not going to happen because of the way this function is called only when that bit is set. And fix some whitespace. Signed-off-by:
-
Senthil Balasubramanian authored
We need to read and backup AR_WA register value permanently and reading this after the chip is awakened results in this register being zeroed out. This seems to fix the ASPM with L1 enabled issue that we have observed. The laptop becomes very slow and hangs mostly with ASPM L1 enabled without this fix. Cc: Stable Kernel <stable@kernel.org> Signed-off-by:
Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by:
-
Senthil Balasubramanian authored
There are few places where we are checking for macversion and revsions before RTC is powered ON. However we are reading the macversion and revisions only after RTC is powered ON and so both macversion and revisions are actully zero and this leads to incorrect srev checks Incorrect srev checks can cause registers to be configured wrongly and can cause unexpected behavior. Fixing this seems to address the ASPM issue that we have observed. The laptop becomes very slow and hangs mostly with ASPM L1 enabled without this fix. fix this by reading the macversion and revisisons even before we start using them. There is no reason why should we delay reading this info until RTC is powered on as this is just a register information. Cc: Stable Kernel <stable@kernel.org> Signed-off-by:
-
