Pull clk fixes from Stephen Boyd:
 "Mostly driver fixes, but there's a core framework fix in here too:

   - Revert the commits that introduce clk management for the SP clk on
     MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and
     there isn't any need to manage this clk, it just causes more
     headaches.

   - A performance regression that went unnoticed for many years where
     we would traverse the entire clk tree looking for a clk by name
     when we already have the pointer to said clk that we're looking for

   - A parent linkage fix for the qcom SDM845 clk driver

   - An i.MX clk driver rate miscalculation fix where order of
     operations were messed up

   - One error handling fix from the static checkers"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc: Use active only source for CPUSS clocks
  clk: ti: Fix error handling in ti_clk_parse_divider_data()
  clk: imx: Fix fractional clock set rate computation
  clk: Remove global clk traversal on fetch parent index
  Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock"
  Revert "clk: mmp2: add SP clock"
  Revert "Input: olpc_apsp - enable the SP clock"

Pull crypto fix from Herbert Xu:
 "This fixes a bug in cavium/nitrox where the callback is invoked prior
  to the DMA unmap"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: cavium/nitrox - Invoke callback after DMA unmap

Pull PCI fixes from Bjorn Helgaas:

 - Revert armada8k GPIO reset change that broke Macchiatobin booting
   (Baruch Siach)

 - Use actual size config reads on ARM cns3xxx (Koen Vandeputte)

 - Fix ARM cns3xxx config write alignment issue (Koen Vandeputte)

 - Fix imx6 PHY device link error checking (Leonard Crestez)

 - Fix imx6 probe failure on chips without separate PCI power domain
   (Leonard Crestez)

* tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: armada8k: Add support for gpio controlled reset signal"
  ARM: cns3xxx: Use actual size reads for PCIe
  ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment
  PCI: imx: Fix checking pd_pcie_phy device link addition
  PCI: imx: Fix probe failure without power domain

Revert commit 3d71746c ("PCI: armada8k: Add support for gpio controlled
reset signal").

That commit breaks boot on Macchiatobin board when a Mellanox NIC is
present in the PCIe slot.

It turns out that full reset cycle requires first comphy serdes
initialization. Reset signal toggle without comphy initialization makes
access to PCI configuration registers stall indefinitely. U-Boot toggles
the Macchiatobin PCIe reset line already at boot, after initializing the
comphy serdes.

So while commit 3d71746c ("PCI: armada8k: Add support for gpio controlled
reset signal") enables PCIe on platforms that U-Boot does not touch the
reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the
Macchiatobin board.

Revert commit 3d71746c ("PCI: armada8k: Add support for gpio controlled
reset signal") entirely to fix the Macchiatobin regression.
Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

commit 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config
accessors") reimplemented cns3xxx_pci_read_config() using
pci_generic_config_read32(), which preserved the property of only doing
32-bit reads.

It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
so it changed writes from always being 32 bits to being the actual size,
which works just fine.

Given that:

- The documentation does not mention that only 32 bit access is allowed.
- Writes are already executed using the actual size
- Extensive testing shows that 8b, 16b and 32b reads work as intended

Allow read access of any size by replacing pci_generic_config_read32()
with the pci_generic_config_read() accessors.

Fixes: 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
CC: Krzysztof Halasa <khalasa@piap.pl>
CC: Olof Johansson <olof@lixom.net>
CC: Robin Leblon <robin.leblon@ncentric.com>
CC: Rob Herring <robh@kernel.org>
CC: Russell King <linux@armlinux.org.uk>
CC: Tim Harvey <tharvey@gateworks.com>

Originally, cns3xxx used its own functions for mapping, reading and
writing config registers.

Commit 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config
accessors") removed the internal PCI config write function in favor of
the generic one:

  cns3xxx_pci_write_config() --> pci_generic_config_write()

cns3xxx_pci_write_config() expected aligned addresses, being produced by
cns3xxx_pci_map_bus() while the generic one pci_generic_config_write()
actually expects the real address as both the function and hardware are
capable of byte-aligned writes.

This currently leads to pci_generic_config_write() writing to the wrong
registers.

For instance, upon ath9k module loading:

- driver ath9k gets loaded
- The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER,
  located at 0x0D
- cns3xxx_pci_map_bus() aligns the address to 0x0C
- pci_generic_config_write() effectively writes 0xA8 into register 0x0C
  (CACHE_LINE_SIZE)

Fix the bug by removing the alignment in the cns3xxx mapping function.

Fixes: 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
CC: stable@vger.kernel.org	# v4.0+
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Olof Johansson <olof@lixom.net>
CC: Robin Leblon <robin.leblon@ncentric.com>
CC: Rob Herring <robh@kernel.org>
CC: Russell King <linux@armlinux.org.uk>

The check on the device_link_add() return value is wrong;
this leads to erroneous code execution, so fix it.

Fixes: 3f7cceea ("PCI: imx: Add multi-pd support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

On chips without a separate power domain for PCI (such as 6q/6qp) the
imx6_pcie_attach_pd() function incorrectly returns an error.

Fix by returning 0 if dev_pm_domain_attach_by_name() does not find
anything.

Fixes: 3f7cceea ("PCI: imx: Add multi-pd support")
Reported-by: Lukas F.Hartmann <lukas@mntmn.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

This reverts commit 2d29f6b9.

It turns out that the fix can lead to a ~20 percent performance regression
in initial writes to the page cache according to iozone.  Let's revert this
for now to have more time for a proper fix.

Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This consists of run-time fixes to cpu-hotplug, and seccomp tests,
  compile fixes to ir, net, and timers Makefiles"

* tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: timers: use LDLIBS instead of LDFLAGS
  selftests: net: use LDLIBS instead of LDFLAGS
  selftests/seccomp: Enhance per-arch ptrace syscall skip tests
  selftests: Use lirc.h from kernel tree, not from system
  selftests: cpu-hotplug: fix case where CPUs offline > CPUs present

Pull NFS client fixes from Anna Schumaker:
 "This addresses two bugs, one in the error code handling of
  nfs_page_async_flush() and one to fix a potential NULL pointer
  dereference in nfs_parse_devname().

  Stable bugfix:
   - Fix up return value on fatal errors in nfs_page_async_flush()

  Other bugfix:
   - Fix NULL pointer dereference of dev_name"

* tag 'nfs-for-5.0-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Fix up return value on fatal errors in nfs_page_async_flush()
  nfs: Fix NULL pointer dereference of dev_name

Pull sound fixes from Takashi Iwai:
 "Only three fixes.

  The fix for Realtek HD-audio looks lengthy, but it's just a code
  shuffling, and the actual changes are fairly small.

  The rest are a PCM core fix for a long-standing bug that was recently
  scratched by syzkaller, and a trivial USB-audio quirk for DSD support"

* tag 'sound-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Fixed hp_pin no value
  ALSA: pcm: Fix tight loop of OSS capture stream
  ALSA: usb-audio: Add Opus #3 to quirks for native DSD support

The current dentry number tracking code doesn't distinguish between
positive & negative dentries.  It just reports the total number of
dentries in the LRU lists.

As excessive number of negative dentries can have an impact on system
performance, it will be wise to track the number of positive and
negative dentries separately.

This patch adds tracking for the total number of negative dentries in
the system LRU lists and reports it in the 5th field in the
/proc/sys/fs/dentry-state file.  The number, however, does not include
negative dentries that are in flight but not in the LRU yet as well as
those in the shrinker lists which are on the way out anyway.

The number of positive dentries in the LRU lists can be roughly found by
subtracting the number of negative dentries from the unused count.

Matthew Wilcox had confirmed that since the introduction of the
dentry_stat structure in 2.1.60, the dummy array was there, probably for
future extension.  They were not replacements of pre-existing fields.
So no sane applications that read the value of /proc/sys/fs/dentry-state
will do dummy thing if the last 2 fields of the sysctl parameter are not
zero.  IOW, it will be safe to use one of the dummy array entry for
negative dentry count.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The list_lru structure is essentially just a pointer to a table of
per-node LRU lists.  Even if CONFIG_MEMCG_KMEM is defined, the list
field is just used for LRU list registration and shrinker_id is set at
initialization.  Those fields won't need to be touched that often.

So there is no point to make the list_lru structures to sit in their own
cachelines.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The nr_dentry_unused per-cpu counter tracks dentries in both the LRU
lists and the shrink lists where the DCACHE_LRU_LIST bit is set.

The shrink_dcache_sb() function moves dentries from the LRU list to a
shrink list and subtracts the dentry count from nr_dentry_unused.  This
is incorrect as the nr_dentry_unused count will also be decremented in
shrink_dentry_list() via d_shrink_del().

To fix this double decrement, the decrement in the shrink_dcache_sb()
function is taken out.

Fixes: 4e717f5c ("list_lru: remove special case function list_lru_dispose_all."
Cc: stable@kernel.org
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull IOMMU fixes from Joerg Roedel:
 "A few more fixes this time:

   - Two patches to fix the error path of the map_sg implementation of
     the AMD IOMMU driver.

   - Also a missing IOTLB flush is fixed in the AMD IOMMU driver.

   - Memory leak fix for the Intel IOMMU driver.

   - Fix a regression in the Mediatek IOMMU driver which caused device
     initialization to fail (seen as broken HDMI output)"

* tag 'iommu-fixes-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix IOMMU page flush when detach device from a domain
  iommu/mediatek: Use correct fwspec in mtk_iommu_add_device()
  iommu/vt-d: Fix memory leak in intel_iommu_put_resv_regions()
  iommu/amd: Unmap all mapped pages in error path of map_sg
  iommu/amd: Call free_iova_fast with pfn in map_sg

Pull GPIO fixes from Linus Walleij:
 "Here is a bunch of GPIO fixes for the v5.0 series. I was helped out by
  Bartosz in collecting these fixes, for which I am very grateful, the
  biggest achievement in GPIO right now is work distribution.

  There is one serious core fix (timestamping) and a bunch of driver
  fixes:

   - Fix timestamps on nested IRQs

   - Handle IRQs properly in multiple instances of PCF857x

   - Use the right data register and IRQ type setting in the Spreadtrum
     GPIO driver

   - Let the value argument work properly when setting direction in the
     Altera GPIO driver

   - Mask interrupts properly in the vf610 driver"

* tag 'gpio-v5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: vf610: Mask all GPIO interrupts
  gpio: altera-a10sr: Set proper output level for direction_output
  gpio: sprd: Fix incorrect irq type setting for the async EIC
  gpio: sprd: Fix the incorrect data register
  gpiolib: fix line event timestamps for nested irqs
  gpio: pcf857x: Fix interrupts on multiple instances

Pull networking fixes from David Miller:

 1) Need to save away the IV across tls async operations, from Dave
    Watson.

 2) Upon successful packet processing, we should liberate the SKB with
    dev_consume_skb{_irq}(). From Yang Wei.

 3) Only apply RX hang workaround on effected macb chips, from Harini
    Katakam.

 4) Dummy netdev need a proper namespace assigned to them, from Josh
    Elsasser.

 5) Some paths of nft_compat run lockless now, and thus we need to use a
    proper refcnt_t. From Florian Westphal.

 6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua.

 7) netrom does not refcount sockets properly wrt. timers, fix that by
    using the sock timer API. From Cong Wang.

 8) Fix locking of inexact inserts of xfrm policies, from Florian
    Westphal.

 9) Missing xfrm hash generation bump, also from Florian.

10) Missing of_node_put() in hns driver, from Yonglong Liu.

11) Fix DN_IFREQ_SIZE, from Johannes Berg.

12) ip6mr notifier is invoked during traversal of wrong table, from Nir
    Dotan.

13) TX promisc settings not performed correctly in qed, from Manish
    Chopra.

14) Fix OOB access in vhost, from Jason Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  MAINTAINERS: Add entry for XDP (eXpress Data Path)
  net: set default network namespace in init_dummy_netdev()
  net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles
  net: caif: call dev_consume_skb_any when skb xmit done
  net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: macb: Apply RXUBR workaround only to versions with errata
  net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq
  net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq
  net: tls: Fix deadlock in free_resources tx
  net: tls: Save iv in tls_rec for async crypto requests
  vhost: fix OOB in get_rx_bufs()
  qed: Fix stack out of bounds bug
  qed: Fix system crash in ll2 xmit
  qed: Fix VF probe failure while FLR
  qed: Fix LACP pdu drops for VFs
  qed: Fix bug in tx promiscuous mode settings
  net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  netfilter: ipt_CLUSTERIP: fix warning unused variable cn
  ...

Ensure that we return the fatal error value that caused us to exit
nfs_page_async_flush().

Fixes: c373fff7 ("NFSv4: Don't special case "launder"")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.12+
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Add multiple people as maintainers for XDP, sorted alphabetically.

XDP is also tied to driver level support and code, but we cannot add all
drivers to the list. Instead K: and N: match on 'xdp' in hope to catch some
of those changes in drivers.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Assign a default net namespace to netdevs created by init_dummy_netdev().
Fixes a NULL pointer dereference caused by busy-polling a socket bound to
an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat
if napi_poll() received packets:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
  IP: napi_busy_loop+0xd6/0x200
  Call Trace:
    sock_poll+0x5e/0x80
    do_sys_poll+0x324/0x5a0
    SyS_poll+0x6c/0xf0
    do_syscall_64+0x6b/0x1f0
    entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 7db6b048 ("net: Commonize busy polling code to focus on napi_id instead of socket")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The skb should be freed by dev_consume_skb_any() in b44_start_xmit()
when bounce_skb is used. The skb is be replaced by bounce_skb, so the
original skb should be consumed(not drop).

dev_consume_skb_irq() should be called in b44_tx() when skb xmit
done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The skb shouled be consumed when xmit done, it makes drop profiles
(dropwatch, perf) more friendly.
dev_kfree_skb_irq()/kfree_skb() shouled be replaced by
dev_consume_skb_any(), it makes code cleaner.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_consume_skb_irq() should be called in cp_tx() when skb xmit
done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The interrupt handler contains a workaround for RX hang applicable
to Zynq and AT91RM9200 only. Subsequent versions do not need this
workaround. This workaround unnecessarily resets RX whenever RX used
bit read is observed, which can be often under heavy traffic. There
is no other action performed on RX UBR interrupt. Hence introduce a
CAPS mask; enable this interrupt and workaround only on affected
versions.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix hp_pin always no value.

[More notes on the changes:

 The hp_pin value that is referred in alc294_hp_init() is always zero
 at the moment the function gets called, hence this is actually
 useless as in the current code.

 And, this kind of init sequence should be called from the codec init
 callback, instead of the parser function.  So, the first fix in this
 patch to move the call call into its own init_hook.

 OTOH, this function is needed to be called only once after the boot,
 and it'd take too long for invoking at each resume (where the init
 callback gets called).  So we add a new flag and invoke this only
 once as an additional fix.

 The one case is still not covered, though: S4 resume.  But this
 change itself won't lead to any regression in that regard, so we
 leave S4 issue as is for now and fix it later.  -- tiwai ]

Fixes: bde1a745 ("ALSA: hda/realtek - Fixed headphone issue for ALC700")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

dev_consume_skb_irq() should be called in cpmac_end_xmit() when
xmit done. It makes drop profiles more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_consume_skb_irq() should be called in bmac_txdma_intr() when
xmit done. It makes drop profiles more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_consume_skb_irq() should be called in amd8111e_tx() when xmit
done. It makes drop profiles more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_consume_skb_irq() should be called in ace_tx_int() when xmit
done. It makes drop profiles more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

If there are outstanding async tx requests (when crypto returns EINPROGRESS),
there is a potential deadlock: the tx work acquires the lock, while we
cancel_delayed_work_sync() while holding the lock.  Drop the lock while waiting
for the work to complete.

Fixes: a42055e8 ("Add support for async encryption of records...")
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

aead_request_set_crypt takes an iv pointer, and we change the iv
soon after setting it.  Some async crypto algorithms don't save the iv,
so we need to save it in the tls_rec for async requests.

Found by hardcoding x64 aesni to use async crypto manager (to test the async
codepath), however I don't think this combination can happen in the wild.
Presumably other hardware offloads will need this fix, but there have been
no user reports.

Fixes: a42055e8 ("Add support for async encryption of records...")
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After batched used ring updating was introduced in commit e2b3b35e
("vhost_net: batch used ring update in rx"). We tend to batch heads in
vq->heads for more than one packet. But the quota passed to
get_rx_bufs() was not correctly limited, which can result a OOB write
in vq->heads.

        headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
                    vhost_len, &in, vq_log, &log,
                    likely(mergeable) ? UIO_MAXIOV : 1);

UIO_MAXIOV was still used which is wrong since we could have batched
used in vq->heads, this will cause OOB if the next buffer needs more
than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've
batched 64 (VHOST_NET_BATCH) heads:
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>

=============================================================================
BUG kmalloc-8k (Tainted: G    B            ): Redzone overwritten
-----------------------------------------------------------------------------

INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc
INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674
    kmem_cache_alloc_trace+0xbb/0x140
    alloc_pd+0x22/0x60
    gen8_ppgtt_create+0x11d/0x5f0
    i915_ppgtt_create+0x16/0x80
    i915_gem_create_context+0x248/0x390
    i915_gem_context_create_ioctl+0x4b/0xe0
    drm_ioctl_kernel+0xa5/0xf0
    drm_ioctl+0x2ed/0x3a0
    do_vfs_ioctl+0x9f/0x620
    ksys_ioctl+0x6b/0x80
    __x64_sys_ioctl+0x11/0x20
    do_syscall_64+0x43/0xf0
    entry_SYSCALL_64_after_hwframe+0x44/0xa9
INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x          (null) flags=0x200000000010201
INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b

Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for
vhost-net. This is done through set the limitation through
vhost_dev_init(), then set_owner can allocate the number of iov in a
per device manner.

This fixes CVE-2018-16880.

Fixes: e2b3b35e ("vhost_net: batch used ring update in rx")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Manish Chopra says:

====================
qed: Bug fixes

This series have SR-IOV and some general fixes.
Please consider applying it to "net"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

KASAN reported following bug in qed_init_qm_get_idx_from_flags
due to inappropriate casting of "pq_flags". Fix the type of "pq_flags".

[  196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed]
[  196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712
[  196.624714]
[  196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1
[  196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018
[  196.624733] Workqueue: events work_for_cpu_fn
[  196.624738] Call trace:
[  196.624742]  dump_backtrace+0x0/0x2f8
[  196.624745]  show_stack+0x24/0x30
[  196.624749]  dump_stack+0xe0/0x11c
[  196.624755]  print_address_description+0x68/0x260
[  196.624759]  kasan_report+0x178/0x340
[  196.624762]  __asan_report_load_n_noabort+0x38/0x48
[  196.624786]  qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed]
[  196.624808]  qed_init_qm_info+0xec0/0x2200 [qed]
[  196.624830]  qed_resc_alloc+0x284/0x7e8 [qed]
[  196.624853]  qed_slowpath_start+0x6cc/0x1ae8 [qed]
[  196.624864]  __qede_probe.isra.10+0x1cc/0x12c0 [qede]
[  196.624874]  qede_probe+0x78/0xf0 [qede]
[  196.624879]  local_pci_probe+0xc4/0x180
[  196.624882]  work_for_cpu_fn+0x54/0x98
[  196.624885]  process_one_work+0x758/0x1900
[  196.624888]  worker_thread+0x4e0/0xd18
[  196.624892]  kthread+0x2c8/0x350
[  196.624897]  ret_from_fork+0x10/0x18
[  196.624899]
[  196.624902] Allocated by task 2:
[  196.624906]  kasan_kmalloc.part.1+0x40/0x108
[  196.624909]  kasan_kmalloc+0xb4/0xc8
[  196.624913]  kasan_slab_alloc+0x14/0x20
[  196.624916]  kmem_cache_alloc_node+0x1dc/0x480
[  196.624921]  copy_process.isra.1.part.2+0x1d8/0x4a98
[  196.624924]  _do_fork+0x150/0xfa0
[  196.624926]  kernel_thread+0x48/0x58
[  196.624930]  kthreadd+0x3a4/0x5a0
[  196.624932]  ret_from_fork+0x10/0x18
[  196.624934]
[  196.624937] Freed by task 0:
[  196.624938] (stack is not available)
[  196.624940]
[  196.624943] The buggy address belongs to the object at ffff809b00bc0000
[  196.624943]  which belongs to the cache thread_stack of size 32768
[  196.624946] The buggy address is located 29536 bytes inside of
[  196.624946]  32768-byte region [ffff809b00bc0000, ffff809b00bc8000)
[  196.624948] The buggy address belongs to the page:
[  196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0
[  196.624960] flags: 0xfffff8000008100(slab|head)
[  196.624967] raw: 0fffff8000008100 dead000000000100 dead000000000200 ffff809b4001c000
[  196.624970] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[  196.624973] page dumped because: kasan: bad access detected
[  196.624974]
[  196.624976] Memory state around the buggy address:
[  196.624980]  ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624983]  ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2
[  196.624988]                                                        ^
[  196.624990]  ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624993]  ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624995] ==================================================================
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cache number of fragments in the skb locally as in case
of linear skb (with zero fragments), tx completion
(or freeing of skb) may happen before driver tries
to get number of frgaments from the skb which could
lead to stale access to an already freed skb.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VFs may hit VF-PF channel timeout while probing, as in some
cases it was observed that VF FLR and VF "acquire" message
transaction (i.e first message from VF to PF in VF's probe flow)
could occur simultaneously which could lead VF to fail sending
"acquire" message to PF as VF is marked disabled from HW perspective
due to FLR, which will result into channel timeout and VF probe failure.

In such cases, try retrying VF "acquire" message so that in later
attempts it could be successful to pass message to PF after the VF
FLR is completed and can be probed successfully.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VF is always configured to drop control frames
(with reserved mac addresses) but to work LACP
on the VFs, it would require LACP control frames
to be forwarded or transmitted successfully.

This patch fixes this in such a way that trusted VFs
(marked through ndo_set_vf_trust) would be allowed to
pass the control frames such as LACP pdus.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When running tx switched traffic between VNICs
created via a bridge(to which VFs are added),
adapter drops the unicast packets in tx flow due to
VNIC's ucast mac being unknown to it. But VF interfaces
being in promiscuous mode should have caused adapter
to accept all the unknown ucast packets. Later, it
was found that driver doesn't really configure tx
promiscuous mode settings to accept all unknown unicast macs.

This patch fixes tx promiscuous mode settings to accept all
unknown/unmatched unicast macs and works out the scenario.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_consume_skb_irq() should be called in i596_interrupt() when skb
xmit done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <albin_yang@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>