- 05 Mar, 2015 18 commits
-
-
Greg Rose authored
If the system administrator is requesting an offline diagnostic test using 'ethtool -t' then we should, you know, actually take the device offline before doing the testing. Change-ID: I6afa1cbfcc821c9ab6e6f47ed4d8dc2d8dd20e82 Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Jim Young <james.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Catherine Sullivan authored
Some FW versions are incorrectly reporting a breakout cable as PHY type 0x3 when it should be 0x16 (I40E_PHY_TYPE_10GBASE_SFPP_CU). If we get this value back from FW and the version is < 4.40, reassign it to I40E_PHY_TYPE_10GBASE_SFPP_CU. Change-ID: Ibb41a0e3cd2c0753744e8553959240df6ed13ae8 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
-
Jesse Brandeburg authored
During resets (possibly caused by a Tx hang) the driver would accidentally clear the XPS mask for all queues back to 0. This caused higher CPU utilization and had some other performance impacts for transmit tests. Change-ID: I95f112432c9e643a153eaa31cd28cdcbfdd01831 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Jesse Brandeburg authored
Use automatic sign extension by replacing 0xffff... constants with ~(u64)0 or ~(u32)0. Change-ID: I73cab4cd2611795bb12e00f0f24fafaaee07457c Signed-off-by:
Kevin Scott <kevin.c.scott@intel.com> Signed-off-by:
-
Shannon Nelson authored
0x2A is the NVM version so it has useful data but it is per image version every image can have a different one. 0x18 is the dev starter version which all the images for release will have the same version. Of the two 0x18 is more useful and is what should be displayed. Change-ID: Idf493da13a42ab211e2de0bef287f5de51033cca Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Signed-off-by:
-
Neerav Parikh authored
In CEE mode the firmware does not set the operational status bit of the application TLV status as returned from the "Get CEE DCBX Oper Cfg" AQ command. This occurs whenever a DCBX configuration is changed. This is a workaround to remove the check for the operational and sync bits of the application TLV status till a firmware fix is provided. Change-ID: I1a31ff2fcadcb06feb5b55776a33593afc6ea176 Signed-off-by:
Neerav Parikh <neerav.parikh@intel.com> Acked-by:
-
Matt Jared authored
Modify our get and set LED functions so they ignore activity LEDs, as we are required to blink the link LEDs only. Change-ID: I647ea67a6fc95cbbab6e3cd01d81ec9ae096a9ad Signed-off-by:
Matt Jared <matthew.a.jared@intel.com> Signed-off-by:
-
Greg Rose authored
Recent changes to the driver initialization have caused the BW configurations to not take effect. We use a BW configuration read and write back to "kick" the Tx scheduler into action. Change-ID: I94ab377c58d3a3986e3de62b6c199be3fd2ee5e6 Signed-off-by:
-
Petri Gynther authored
1. Use c_index and ring->c_index to determine how many TxCBs/TxBDs are ready for cleanup - c_index = the current value of TDMA_CONS_INDEX - TDMA_CONS_INDEX is HW-incremented and auto-wraparound (0x0-0xFFFF) - ring->c_index = __bcmgenet_tx_reclaim() cleaned up to this point on the previous invocation 2. Add bcmgenet_tx_ring->clean_ptr - index of the next TxCB to be cleaned - incremented as TxCBs/TxBDs are processed - value always in range [ring->cb_ptr, ring->end_ptr] 3. Fix incrementing of dev->stats.tx_packets - should be incremented only when tx_cb_ptr->skb != NULL These changes simplify __bcmgenet_tx_reclaim(). Furthermore, Tx ring size can now be any value. With the old code, Tx ring size had to be a power-of-2: num_tx_bds = ring->size; c_index &= (num_tx_bds - 1); last_c_index &= (num_tx_bds - 1); Signed-off-by:Petri Gynther <pgynther@google.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alexander Duyck says: ==================== ipv4/fib_trie: Cleanups to prepare for introduction of key vector This patch series is meant to mostly just clean up the fib_trie to prepare it for the introduction of the key_vector. As such there are a number of minor clean-ups such as reformatting the tnode to match the format once the key vector is introduced, some optimizations to drop the need for a leaf parent pointer, and some changes to remove duplication of effort such as the 2 look-ups that were essentially being done per node insertion. v2: Added code to cleanup idx >> n->bits and explain unsigned long logic Added code to prevent allocation when tnode size is larger than size_t ==================== Signed-off-by: -
Alexander Duyck authored
This patch adds code to prevent us from attempting to allocate a tnode with a size larger than what can be represented by size_t. Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Alexander Duyck authored
This change updates the fib_table_lookup function so that it is in sync with the fib_find_node function in terms of the explanation for the index check based on the bits value. I have also updated it from doing a mask to just doing a compare as I have found that seems to provide more options to the compiler as I have seen it turn this into a shift of the value and test under some circumstances. In addition I addressed one minor issue in which we kept computing the key ^ n->key when checking the fib aliases. I pulled the xor out of the loop in order to reduce the number of memory reads in the lookup. As a result we should save a couple cycles since the xor is only done once much earlier in the lookup. Signed-off-by:
-
Alexander Duyck authored
The fib_table was wrapped in several places with an rcu_read_lock/rcu_read_unlock however after looking over the code I found several spots where the tables were being accessed as just standard pointers without any protections. This change fixes that so that all of the proper protections are in place when accessing the table to take RCU replacement or removal of the table into account. Signed-off-by:
-
Alexander Duyck authored
If we are going to compact the leaf and tnode we first need to make sure the fields are all in the same place. In that regard I am moving the leaf pointer which represents the fib_alias hash list to occupy what is currently the first key_vector pointer. Signed-off-by:
-
Alexander Duyck authored
This change makes it so that the insert and delete functions make use of the tnode pointer returned in the fib_find_node call. By doing this we will not have to rely on the parent pointer in the leaf which will be going away soon. Signed-off-by:
-
Alexander Duyck authored
This change makes it so that the parent pointer is returned by reference in fib_find_node. By doing this I can use it to find the parent node when I am performing an insertion and I don't have to look for it again in fib_insert_node. Signed-off-by:
-
Alexander Duyck authored
This change makes it so that leaf_walk_rcu takes a tnode and a key instead of the trie and a leaf. The main idea behind this is to avoid using the leaf parent pointer as that can have additional overhead in the future as I am trying to reduce the size of a leaf down to 16 bytes on 64b systems and 12b on 32b systems. Signed-off-by:
-
Alexander Duyck authored
This change makes it so that we only call resize on the tnodes, instead of from each of the leaves. By doing this we can significantly reduce the amount of time spent resizing as we can update all of the leaves in the tnode first before we make any determinations about resizing. As a result we can simply free the tnode in the case that all of the leaves from a given tnode are flushed instead of resizing with each leaf removed. Signed-off-by:
-
- 04 Mar, 2015 22 commits
-
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.1-20150304' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-03-04 this is a pull request of 3 patches for net-next/master. Aaron Wu contributes three patches for the blackfin can driver, which cleans up the driver and makes use of more platform independent code. ==================== Signed-off-by:
-
Wu Fengguang authored
Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
David S. Miller authored
Sathya Perla says: ==================== be2net: patch set Hi Dave, the following patch set includes three feature additions relating to SR-IOV to be2net. Patch 1 avoid creating a non-RSS default RXQ when FW allows it. This prevents wasting one RXQ for each VF. Patch 2 adds support for evenly distributing all queue & filter resources across VFs. The FW informs the driver as to which resources are distributable. Patch 3 implements the sriov_configure PCI method to allow runtime enablement of VFs via sysfs. Pls consider applying this patch-set to the net-next tree. Thanks! ==================== Signed-off-by: -
Vasundhara Volam authored
This patch implements the .sriov_configure() PCI method to allow for runtime enabling/disabling of VFs. The module param "num_vfs" is now deprecated. At the time of driver load the PF-pool resources are allocated to the PF. When the user enables VFs, the resources are then re-distributed across PFs and VFs based on the number of VFs enabled. Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Vasundhara Volam authored
When SR-IOV is enabled in the adapter, the FW distributes resources evenly across the PF and it's VFs. This is currently done only for some resources. This patch adds support for a new cmd that queries the FW for the list of resources for which the distribution is allowed and distributes them accordingly. Signed-off-by:
-
Vasundhara Volam authored
On BE2, BE3 and Skhawk-R chips one non-RSS (called "default") RXQ was needed to receive non-IP traffic. Some FW versions now export a capability called IFACE_FLAGS_DEFQ_RSS where this requirement doesn't hold. On such FWs the driver now does not create the non-RSS default queue. This prevents wasting one RXQ per VF. Signed-off-by:
-
Michal Simek authored
Remove Kconfig dependency and enable driver for all ARCHs. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
-
David S. Miller authored
Ben Hutchings says: ==================== sh_eth changes for net-next Some minor new features and fixes. These depend in part on the series I sent earlier for net, specifically "sh_eth: WARN on access to a register not implemented in a particular chip" depends on "sh_eth: Fix RX recovery on R-Car in case of RX ring underrun". ==================== Signed-off-by: -
Ben Hutchings authored
The statistics registers have write-clear behaviour, which means we will lose any increment between the read and write. Mitigate this by only clearing when we read a non-zero value, so we will never falsely report a total of zero. This also saves time as we only handle error statistics here and they won't often be incremented. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
There are many different sets of registers implemented by the different versions of this controller, and we can only expect this to get more complicated in future. Limit how much ethtool needs to know by including an explicit bitmap of which registers are included in the dump, allowing room for future growth in the number of possible registers. As I don't have datasheets for all of these, I've only included registers that are: - defined in all 5 register type arrays, or - used by the driver, or - documented in the datasheet I have Add one new capability flag so we can tell whether the RTRATE register is implemented. Delete the TSU_ADRL0 and TSU_ADR{H,L}31 definitions, as they weren't used and the address table is already assumed to be contiguous. Signed-off-by: -
Ben Hutchings authored
Currently we may silently read/write a register at offset 0. Change this to WARN and then ignore the write or read-back all-ones. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Ben Hutchings authored
At least on the R8A7790, RFS8 reflects the RINT8 (multicast) MAC status flag. Signed-off-by:
-
Aaron Wu authored
Header file was in arch dependent location arch/blackfin/include/asm/bfin_can.h, Now move and merge the useful contents of header file into driver code, note the original header file is reserved for full registers set access test by other code so it survives. Signed-off-by:
Aaron Wu <Aaron.wu@analog.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Aaron Wu authored
Blackfin was built without MMU, old driver code access the IO space by physical address, introduce the ioremap approach to be compitable with the common style supporting MMU enabled arch. Signed-off-by:
-
Aaron Wu authored
Replace the blackfin arch dependent style of bfin_read/bfin_write with common readw/writew Signed-off-by:
-
David S. Miller authored
Eric W. Biederman says: ==================== Basic MPLS support take 2 On top of my two pending neighbour table prep patches here is the mpls support refactored to use them, and edited to not drop routes when an interface goes down. Additionally the addition of RTA_LLGATEWAY has been replaced with the addtion of RTA_VIA. RTA_VIA being an attribute that includes the address family as well as the address of the next hop. MPLS is at it's heart simple and I have endeavoured to maintain that simplicity in my implemenation. This is an implementation of a RFC3032 forwarding engine, and basic MPLS egress logic. Which should make linux sufficient to be a mpls forwarding node or to be a LSA (Label Switched Router) as it says in all of the MPLS documents. The ingress support will follow but it deserves it's own discussion so I am pushing it separately. ==================== Signed-off-by: -
Eric W. Biederman authored
Unlike IPv4 this code notifies on all cases where mpls routes are added or removed and it never automatically removes routes. Avoiding both the userspace confusion that is caused by omitting route updates and the possibility of a flood of netlink traffic when an interface goes doew. For now reserved labels are handled automatically and userspace is not notified. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
This change adds two new netlink routing attributes: RTA_VIA and RTA_NEWDST. RTA_VIA specifies the specifies the next machine to send a packet to like RTA_GATEWAY. RTA_VIA differs from RTA_GATEWAY in that it includes the address family of the address of the next machine to send a packet to. Currently the MPLS code supports addresses in AF_INET, AF_INET6 and AF_PACKET. For AF_INET and AF_INET6 the destination mac address is acquired from the neighbour table. For AF_PACKET the destination mac_address is specified in the netlink configuration. I think raw destination mac address support with the family AF_PACKET will prove useful. There is MPLS-TP which is defined to operate on machines that do not support internet packets of any flavor. Further seem to be corner cases where it can be useful. At this point I don't care much either way. RTA_NEWDST specifies the destination address to forward the packet with. MPLS typically changes it's destination address at every hop. For a swap operation RTA_NEWDST is specified with a length of one label. For a push operation RTA_NEWDST is specified with two or more labels. For a pop operation RTA_NEWDST is not specified or equivalently an emtpy RTAN_NEWDST is specified. Those new netlink attributes are used to implement handling of rt-netlink RTM_NEWROUTE, RTM_DELROUTE, and RTM_GETROUTE messages, to maintain the MPLS label table. rtm_to_route_config parses a netlink RTM_NEWROUTE or RTM_DELROUTE message, verify no unhandled attributes or unhandled values are present and sets up the data structures for mpls_route_add and mpls_route_del. I did my best to match up with the existing conventions with the caveats that MPLS addresses are all destination-specific-addresses, and so don't properly have a scope. Signed-off-by:
-
Eric W. Biederman authored
Reading and writing addresses in network byte order in netlink is traditional and I see no reason to change that. MPLS is interesting as effectively it has variabely length addresses (the MPLS label stack). To represent these variable length addresses in netlink I use a valid MPLS label stack (complete with stop bit). This achieves two things: a well defined existing format is used, and the data can be interpreted without looking at it's length. Not needed to look at the length to decode the variable length network representation allows existing userspace functions such as inet_ntop to be used without needed to change their prototype. Signed-off-by:
-
Eric W. Biederman authored
mpls_route_add and mpls_route_del implement the basic logic for adding and removing Next Hop Label Forwarding Entries from the MPLS input label map. The addition and subtraction is done in a way that is consistent with how the existing routing table in Linux are maintained. Thus all of the work to deal with NLM_F_APPEND, NLM_F_EXCL, NLM_F_REPLACE, and NLM_F_CREATE. Cases that are not clearly defined such as changing the interpretation of the mpls reserved labels is not allowed. Because it seems like the right thing to do adding an MPLS route without specifying an input label and allowing the kernel to pick a free label table entry is supported. The implementation is currently less than optimal but that can be changed. As I don't have anything else to test with only ethernet and the loopback device are the only two device types currently supported for forwarding MPLS over. Signed-off-by:
-
Eric W. Biederman authored
This sysctl gives two benefits. By defaulting the table size to 0 mpls even when compiled in and enabled defaults to not forwarding any packets. This prevents unpleasant surprises for users. The other benefit is that as mpls labels are allocated locally a dense table a small dense label table may be used which saves memory and is extremely simple and efficient to implement. This sysctl allows userspace to choose the restrictions on the label table size userspace applications need to cope with. Signed-off-by:
-
