- 06 Oct, 2012 40 commits
-
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Ezequiel Garcia authored
This function returns an integer and it's mandatory to check the return code. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Ezequiel Garcia authored
This kind of memcpy() is error-prone and its replacement with a struct assignment is prefered. Signed-off-by:
-
Guilherme Herrmann Destefani authored
Added V4L2_CID_COLOR_KILLER control to the bt8xx driver. The control V4L2_CID_PRIVATE_CHROMA_AGC was changed too because with this change the bttv driver must touch two bits in the SC Loop Control Registers, for controls V4L2_CID_COLOR_KILLER and V4L2_CID_PRIVATE_CHROMA_AGC. Signed-off-by:
Guilherme Herrmann Destefani <linuxtv@destefani.eng.br> Signed-off-by:
-
Sachin Kamat authored
devm_kzalloc() makes error handling and cleanup simpler. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Sachin Kamat authored
printk(KERN_ERR...) is replaced with pr_err to silence checkpatch warning. WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warnings: WARNING: sizeof *ctx should be sizeof(*ctx) WARNING: sizeof *dev should be sizeof(*dev) Signed-off-by:
-
Sachin Kamat authored
v4l2_m2m_release() was placed after the return statement and outside any of the goto labels and hence was not getting executed under the error exit path. This patch moves it under the exit path label. Signed-off-by:
-
Peter Senna Tschudin authored
Remove unused label and rename remaining labels Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Fix a series of warnings when compiled with W=1: drivers/media/tuners/mt2063.c: In function 'mt2063_setreg': drivers/media/tuners/mt2063.c:290:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] ... drivers/media/tuners/mt2063.c:2013:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] drivers/media/tuners/mt2063.c:2271:14: warning: no previous prototype for 'tuner_MT2063_SoftwareShutdown' [-Wmissing-prototypes] drivers/media/tuners/mt2063.c:2286:14: warning: no previous prototype for 'tuner_MT2063_ClearPowerMaskBits' [-Wmissing-prototypes] Several of those warnings are real bugs: the error status code used to be unsigned, but they're assigned to negative error codes. Fix it by using unsigned int. While here, comment the two power management functions, while we don't add a code there to properly handle tuner suspend/resume. Signed-off-by: -
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
-
Dan Carpenter authored
These should be -ENOSYS because not -EINVAL. Reported-by:
Sean Young <sean@mess.org> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
"carrier" comes from a get_user() in ir_lirc_ioctl(). We need to test that it's not zero before using it as a divisor. It might have been nice to test for this ir_lirc_ioctl() but the mceusb driver uses zero to disable carrier modulation. The bug in redrat3 is a little more subtle. The ->carrier is passed to mod_freq_to_val() which uses it as a divisor. Signed-off-by:
-
Frank Schäfer authored
We currently don't select the register bank in ov2640_s_ctrl, so we can end up writing to DSP register 0x04 instead of sensor register 0x04. This happens for example when calling ov2640_s_ctrl after ov2640_s_fmt. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> [mchehab@redhat.com: Second hunk removed, as it doesn't apply anymore, due to a merge conflict] Signed-off-by:
-
Sachin Kamat authored
devm_kzalloc() has been used to simplify error handling. While at it, the soc_camera_device_register function has been moved to save a few lines of code and a variable. Signed-off-by:
-
Sachin Kamat authored
module_platform_driver simplifies the code by eliminating module_init and module_exit calls. Signed-off-by:
-
Javier Martin authored
Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> [g.liakhovetski@gmx.de: also don't clear pcdev->resizing in .try_fmt()] Signed-off-by:
-
Sylwester Nawrocki authored
Replace the deprecated V4L2_SEL_TGT_*_ACTIVE selection target names with their new unified counterparts. Compatibility definitions are already in linux/v4l2-common.h. Signed-off-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Alfredo Jesús Delaiti authored
Adds audio support for input YPbPr, AV and S-Video on Mygica X8507 card. Remains to be done: IR, FM and ISDBT Signed-off-by:
Alfredo J. Delaiti <alfredodelaiti@netscape.net> Signed-off-by:
-
Antti Palosaari authored
drivers/media/dvb-frontends/cxd2820r_core.c: In function 'cxd2820r_attach': drivers/media/dvb-frontends/cxd2820r_core.c:691:10: warning: unused variable 'gpio' [-Wunused-variable] Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Tomasz Stanislawski authored
This patch extends s5p-hdmi platform data by a GPIO identifier for Hot-Plug-Detection pin. Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Arun Kumar K authored
The vfl_dir flag is presently set to VFL_DIR_M2M only for decoder. The encoder is not working because of this. So adding this flag to the encoder part also. Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Acked-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Jeongtae Park authored
Multi Format Codec 6.x is a hardware video coding acceleration module present in new Exynos5 SoC series. It is capable of handling several new video codecs for decoding and encoding. Signed-off-by:
Jeongtae Park <jtp.park@samsung.com> Signed-off-by:
Janghyuck Kim <janghyuck.kim@samsung.com> Signed-off-by:
Jaeryul Oh <jaeryul.oh@samsung.com> Signed-off-by:
Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by:
-
Jeongtae Park authored
Adds register definitions for MFC v6.x firmware Signed-off-by:
-
Arun Kumar K authored
MFC variant data replaces various macros used in the driver which will change in a different version of MFC hardware. Also does a cleanup of MFC context structure and common files. Signed-off-by:
-
Arun Kumar K authored
Modifies the driver to use a callback based architecture for hardware dependent calls. This architecture is suitable for supporting co-existence with newer versions of MFC hardware. Signed-off-by:
-
Arun Kumar K authored
The patch renames hardware specific opr and cmd files to opr_v5 and cmd_v5 respectively. This is done for accomodating firmware v6. Also the shared memory management files are removed and the functionality is added to the opr_v5 file. Signed-off-by:
-
