- 11 Jul, 2020 18 commits
-
-
Stephen Boyd authored
* clk-fixes: clk: Specify IOMEM dependency for HSDK pll driver clk: AST2600: Add mux for EMMC clock clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
-
David Gow authored
The HSDK pll driver uses the devm_ioremap_resource function, but does not specify a dependency on IOMEM in Kconfig. This causes a build failure on architectures without IOMEM, for example, UML (notably with make allyesconfig). Fix this by making CONFIG_CLK_HSDK depend on CONFIG_IOMEM. Signed-off-by:
David Gow <davidgow@google.com> Link: https://lore.kernel.org/r/20200630043214.1080961-1-davidgow@google.comSigned-off-by:
Stephen Boyd <sboyd@kernel.org>
-
Stephen Boyd authored
* clk-kconfig: clk: Drop duplicate selection in Kconfig
-
Stephen Boyd authored
* clk-qcom: clk: qcom: smd: Add support for MSM8992/4 rpm clocks clk: qcom: ipq8074: Add missing clocks for pcie dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
-
Andy Shevchenko authored
There is no need to select RATIONAL in individual drivers, since common clock symbol does it already. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200614115140.41262-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Konrad Dybcio authored
Add rpm smd clocks, PMIC and bus clocks which are required on MSM8992, MSM8994 (and APQ variants) for clients to vote on. Signed-off-by:
Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200623230018.303776-1-konradybcio@gmail.com [sboyd@kernel.org: Fixed up binding numbers] Signed-off-by:
-
Eddie James authored
The EMMC clock can be derived from either the HPLL or the MPLL. Register a clock mux so that the rate is calculated correctly based upon the parent. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200709195706.12741-2-eajames@linux.ibm.comAcked-by:
Joel Stanley <joel@jms.id.au> Fixes: d3d04f6c ("clk: Add support for AST2600 SoC") Signed-off-by:
-
Sivaprakash Murugesan authored
Add missing clocks and resets for pcie port0 of ipq8074 devices. Co-developed-by:
Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by:
Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1593940680-2363-5-git-send-email-sivaprak@codeaurora.org [sboyd@kernel.org: Make freq table static const] Signed-off-by:
-
Sivaprakash Murugesan authored
Add missing clock bindings for PCIe port0 of ipq8074. Co-developed-by:
-
Nathan Chancellor authored
When building arm32 allmodconfig: ld.lld: error: undefined symbol: ap_cp_unique_name >>> referenced by ap-cpu-clk.c >>> clk/mvebu/ap-cpu-clk.o:(ap_cpu_clock_probe) in archive drivers/built-in.a ap_cp_unique_name is only compiled into the kernel image when CONFIG_ARMADA_AP_CP_HELPER is selected (as it is not user selectable). However, CONFIG_ARMADA_AP_CPU_CLK does not select it. This has been a problem since the driver was added to the kernel but it was not built before commit c318ea261749 ("cpufreq: ap806: fix cpufreq driver needs ap cpu clk") so it was never noticed. Fixes: f756e362 ("clk: mvebu: add CPU clock driver for Armada 7K/8K") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200701201128.2448427-1-natechancellor@gmail.comSigned-off-by:
-
Stephen Boyd authored
* clk-renesas: clk: renesas: rzg2: Mark RWDT clocks as critical clk: renesas: rcar-gen3: Mark RWDT clocks as critical clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot dt-bindings: clock: renesas: cpg: Convert to json-schema
-
Stephen Boyd authored
Merge tag 'clk-renesas-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - One more conversion of DT bindings to json-schema - Enhance critical clock handling to only consider clocks that were enabled at boot time, and use it for watchdog clock handling on R-Car Gen3 and RZ/G2 SoCs * tag 'clk-renesas-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: rzg2: Mark RWDT clocks as critical clk: renesas: rcar-gen3: Mark RWDT clocks as critical clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot dt-bindings: clock: renesas: cpg: Convert to json-schema
-
Stephen Boyd authored
* clk-https: Replace HTTP links with HTTPS ones: Common CLK framework
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200703175114.15027-1-grandmaster@al2klimov.deSigned-off-by:
-
Stephen Boyd authored
- Enable CPU clks on Qualcomm MSM8996 SoCs * clk-qcom: clk: qcom: Add CPU clock driver for msm8996 dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 soc: qcom: Separate kryo l2 accessors from PMU driver clk: qcom: Fix return value check in apss_ipq6018_probe()
-
Loic Poulain authored
Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600MHz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300MHz and 600MHz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk ACD stands for Adaptive Clock Distribution and is used to detect voltage droops. Signed-off-by:Rajendra Nayak <rnayak@codeaurora.org> Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84Signed-off-by:
Ilia Lin <ilialin@codeaurora.org> Ilia Lin: - reworked clock registering - Added clock-tree diagram - non-builtin support - clock notifier on rate change - https://lkml.org/lkml/2018/5/24/123Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Loic Poulain: - fixed driver remove / clk deregistering - Removed useless memory barriers - devm usage when possible - Fixed Kconfig depends Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.orgSigned-off-by:
-
Ilia Lin authored
Each of the CPU clusters (Power and Perf) on msm8996 are clocked via 2 PLLs, a primary and alternate. There are also 2 Mux'es, a primary and secondary all connected together as shown below +-------+ XO | | +------------------>0 | | | PLL/2 | SMUX +----+ +------->1 | | | | | | | +-------+ | +-------+ | +---->0 | | | | +---------------+ | +----------->1 | CPU clk |Primary PLL +----+ PLL_EARLY | | +------> | +------+-----------+ +------>2 PMUX | +---------------+ | | | | | +------+ | +-->3 | +--^+ ACD +-----+ | +-------+ +---------------+ +------+ | |Alt PLL | | | +---------------------------+ +---------------+ PLL_EARLY The primary PLL is what drives the CPU clk, except for times when we are reprogramming the PLL itself (for rate changes) when we temporarily switch to an alternate PLL. A subsequent patch adds support to switch between primary and alternate PLL during rate changes. The primary PLL operates on a single VCO range, between 600MHz and 3GHz. However the CPUs do support OPPs with frequencies between 300MHz and 600MHz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. Signed-off-by:Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1593766185-16346-4-git-send-email-loic.poulain@linaro.orgSigned-off-by:
-
Ilia Lin authored
The driver provides kernel level API for other drivers to access the MSM8996 L2 cache registers. Separating the L2 access code from the PMU driver and making it public to allow other drivers use it. The accesses must be separated with a single spinlock, maintained in this driver. Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
- 29 Jun, 2020 1 commit
-
-
Wei Yongjun authored
In case of error, the function dev_get_regmap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 5e77b4ef ("clk: qcom: Add ipq6018 apss clock controller") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200628023055.50608-1-weiyongjun1@huawei.comSigned-off-by:
-
- 26 Jun, 2020 2 commits
-
-
Stephen Boyd authored
- Make defines for bcm63xx-gate clks to use in DT - Support gate clks on BCM6318 SoCs - Add HDMI clks for BCM2711 SoCs - Support BCM2711 SoC firmware clks * clk-bcm: (42 commits) clk: bcm: dvp: Add missing module informations clk: bcm: rpi: Remove the quirks for the CPU clock clk: bcm2835: Don't cache the PLLB rate clk: bcm2835: Allow custom CCF flags for the PLLs Revert "clk: bcm2835: remove pllb" clk: bcm: rpi: Give firmware clocks a name clk: bcm: rpi: Discover the firmware clocks clk: bcm: rpi: Add an enum for the firmware clocks clk: bcm: rpi: Add DT provider for the clocks clk: bcm: rpi: Make the PLLB registration function return a clk_hw clk: bcm: rpi: Split pllb clock hooks clk: bcm: rpi: Rename is_prepared function clk: bcm: rpi: Pass the clocks data to the firmware function clk: bcm: rpi: Add clock id to data clk: bcm: rpi: Create a data structure for the clocks clk: bcm: rpi: Use CCF boundaries instead of rolling our own clk: bcm: rpi: Make sure the clkdev lookup is removed clk: bcm: rpi: Switch to clk_hw_register_clkdev clk: bcm: rpi: Remove pllb_arm_lookup global pointer clk: bcm: rpi: Make sure pllb_arm is removed ...
-
Maxime Ripard authored
The driver for the DVP controller in the BCM2711 was missing the MODULE_* macros resulting in a modpost warning at compilation. Fixes: 1bc95972 ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200626112513.90816-1-maxime@cerno.techSigned-off-by:
-
- 23 Jun, 2020 7 commits
-
-
Stephen Boyd authored
* clk-vc5: clk: vc5: Enable addition output configurations of the Versaclock dt: Add additional option bindings for IDT VersaClock clk: vc5: Allow Versaclock driver to support multiple instances
-
Adam Ford authored
The existing driver is expecting the Versaclock to be pre-programmed, and only sets the output frequency. Unfortunately, not all devices are pre-programmed, and the Versaclock chip has more options beyond just the frequency. This patch enables the following additional features: - Programmable voltage: 1.8V, 2.5V, or 3.3V - Slew Percentage of normal: 85%, 90%, or 100% - Output Type: LVPECL, CMOS, HCSL, or LVDS Signed-off-by:
Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20200603154329.31579-3-aford173@gmail.comSigned-off-by:
-
Adam Ford authored
The VersaClock driver now supports some additional bindings to support child nodes which can configure optional settings like mode, voltage and slew. This patch updates the binding document to describe what is available in the driver. Signed-off-by:
-
Adam Ford authored
Currently, the Versaclock driver is only expecting one instance and uses hard-coded names for the various clock names. Unfortunately, this is a problem when there is more than one instance of the driver, because the subsequent instantiations of the driver use the identical name. Each clock after the fist fails to load, because the clock subsystem cannot handle two clocks with identical name. This patch removes the hard-coded name arrays and uses kasprintf to assign clock names based on names of their respective node and parent node which gives each clock a unique identifying name. For a verasaclock node with a name like: versaclock5: versaclock_som@6a The updated clock names would appear like: versaclock_som.mux versaclock_som.out0_sel_i2cb versaclock_som.pfd versaclock_som.pll versaclock_som.fod3 versaclock_som.out4 versaclock_som.fod2 versaclock_som.out3 versaclock_som.fod1 versaclock_som.out2 versaclock_som.fod0 versaclock_som.out1 Signed-off-by: -
Stephen Boyd authored
- Enable CPU clks on Qualcomm IPQ6018 SoCs * clk-qcom: clk: qcom: smd: Add support for MSM8936 rpm clocks dt-bindings: clock: rpmcc: Document MSM8936 compatible clk: qcom: smd: Add support for SDM660 rpm clocks clk: qcom: Add ipq6018 apss clock controller clk: qcom: Add DT bindings for ipq6018 apss clock controller clk: qcom: Add ipq apss pll driver dt-bindings: clock: add ipq6018 a53 pll compatible
-
Vincent Knecht authored
Add missing definition of rpm clk for msm8936 soc (also used by msm8939) Signed-off-by:
Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20200613072745.1249003-2-vincent.knecht@mailoo.orgSigned-off-by:
-
Vincent Knecht authored
Acked-by:
-
- 22 Jun, 2020 10 commits
-
-
Ulrich Hecht authored
Ensures RWDT remains alert throughout the boot process if enabled. This patch applies the change to the following SoCs: r8a774a1, r8a774b1 and r8a774c0. Signed-off-by:
Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200616162626.27944-4-uli+renesas@fpond.euSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Ulrich Hecht authored
Ensures RWDT remains alert throughout the boot process if enabled. This patch applies the change to the following SoCs: r8a77950, r8a77951, r8a77960, r8a77961, r8a77965, r8a77970, r8a77980, r8a77990 and r8a77995. Signed-off-by:
-
Ulrich Hecht authored
This allows us to add the RWDT clock to the list of critical clocks without keeping it enabled needlessly if not used. Changing the semantics of crit_mod_clks in this way is safe for the current user (INTC-AP) because it is never off at boot time. Signed-off-by:
-
Konrad Dybcio authored
Add rpm smd clocks, PMIC and bus clocks which are required on SDM630/660 (and APQ variants) for clients to vote on. Signed-off-by:
-
Stephen Boyd authored
* clk-doc: clk: add function documentation for clk_hw_round_rate()
-
Sarang Mairal authored
Information about usage and prerequisites for this API. Signed-off-by:
Sarang Mairal <sarangmairal@gmail.com> Link: https://lore.kernel.org/r/20200611021941.786-2-sarangmairal@gmail.comSigned-off-by:
-
Sivaprakash Murugesan authored
The CPU on Qualcomm ipq6018 devices are clocked primarily by a aplha PLL and xo which are connected to a mux and enable block. Add support for the mux and enable block which feeds the CPU on ipq6018 devices. Reviewed-by:
-
Sivaprakash Murugesan authored
Add dt-binding for ipq6018 apss clock controller Acked-by:
-
Sivaprakash Murugesan authored
The CPUs on Qualcomm ipq based devices are clocked by an alpha PLL. Add support for the apss pll found on ipq based devices which can support CPU frequencies above 1Ghz. Signed-off-by:
-
Sivaprakash Murugesan authored
cpus on ipq6018 are clocked by a53 pll, add device compatible for a53 pll found on ipq6018 devices. Reviewed-by:
-
- 20 Jun, 2020 2 commits
-
-
Stephen Boyd authored
* clk-socfpga: clk: socfpga: agilex: mpu_l2ram_clk should be mpu_ccu_clk clk: socfpga: agilex: add nand_x_clk and nand_ecc_clk dt-bindings: agilex: add NAND_X_CLK and NAND_ECC_CLK
-
Dinh Nguyen authored
Preliminary documentation documented the mpu_l2ram_clk, but since then, the mpu_l2ram_clk is no longer documented. It's now referred to as mpu_ccu_clk. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20200616202417.14376-3-dinguyen@kernel.orgSigned-off-by:
-
