- 05 Oct, 2010 1 commit
-
-
Ido Yariv authored
The HW supports up to 4095 bytes transfers via SPI. The SPI read & write operations do not handle larger transfers, causing the HW to stall in such cases. Fix this by fragmenting large transfers into smaller chunks, and transferring each one separately. Signed-off-by:
Ido Yariv <ido@wizery.com> Tested-by:
Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by:
Luciano Coelho <luciano.coelho@nokia.com>
-
- 30 Sep, 2010 1 commit
-
-
Ohad Ben-Cohen authored
Support building wl1271-equipped boards without building the wl1271 driver itself, e.g.: CONFIG_MACH_OMAP_ZOOM3=y CONFIG_WL12XX is not set Reported-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
- 28 Sep, 2010 26 commits
-
-
Luciano Coelho authored
We are integrating wl1271 commits via a new git tree now and wl1271 development should be made on top of the new tree. Update the repository url accordingly. Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: -
Juuso Oikarinen authored
This patch adds support for the hardware GEM cipher suite. Signed-off-by:
-
Juuso Oikarinen authored
This patch improves connection reliability by choosing the lowest basic rate for null-func frames (which increases their range, as the firmware does not do rate fall-back for null-func frames.) Also, increase the PSM entry retry-counter. Signed-off-by:
Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Tested-by:
Tuomas Katila <ext-tuomas.2.katila@nokia.com> Signed-off-by:
-
Juuso Oikarinen authored
Currently then dwell times for each channel in scans is set to an overly long value, and excessive number of probe-requests are transmitted on each channel (for active scans.) Based on testing, comparable results can be received with smaller dwell-time, and, with fever probe-requests - in fact, reducing the number of probe-requests to 2 seems to increase the number of found results. Configure more optimal values for per channel dwell times. Comparison for the different scan configurations (in my current office environment): dwell-time 60000 3x probe-req == ~60 results 40000 3x probe-req == ~50 results 30000 3x probe-req == ~40 results dwell-time 60000 2x probe-req == ~70 results 40000 2x probe-req == ~60 results 30000 2x probe-req == ~58 results The above are results for a cumulative 3 scan run. For individual scans, the number of results drop slightly more. Signed-off-by: -
Juuso Oikarinen authored
Currently, the driver does not handle a failing hardware command to scan in any way - effectively, the scan machine will jam until the driver is shut down, and future scan requests will just return -EBUSY to user space, resulting in a type of busy-loop. The same problem occurs if the firmware fails to deliver the scan completion event - add timeout for this. Signed-off-by:
-
Juuso Oikarinen authored
There is some probability of hardware failures, which currently go largely undetected. Attempt to recover from these failures by shutting down the hardware, and requesting mac80211 to reconfigure it. Signed-off-by:
-
Juuso Oikarinen authored
Do this so the interface removal can be triggered from an upcoming hardware failure recovery mechanism. Signed-off-by:
-
Juuso Oikarinen authored
The work cancelling has had several hazards, ranging from potentially executing work after the driver is in OFF state, to executing work after the driver and relevant memory structures are already removed. Fix these. Signed-off-by:
-
Juuso Oikarinen authored
The current scan implementation can jam, if the scan request ends up containing no work. This can especially happen if there is a scan request with only 11a band channels for HW that does not support 11a. Signed-off-by:
-
Juuso Oikarinen authored
The WMM queue default configuration was incorrect, and caused uapsd mode problems (among possible others.) Signed-off-by:
-
Juuso Oikarinen authored
Incorrect TID was configured for TX frames. This resulted in incorrect queues to be used for classes in transmission. Signed-off-by:
-
Juuso Oikarinen authored
This patch always enables 11a band towards the mac80211, but prevents scanning (and hence the usage of) 11a band channels if the chipset does not support it. Signed-off-by:
-
Juuso Oikarinen authored
This patch reduces the rate of the null-func used to enter PSM on the last retry as precaution. Signed-off-by:
-
Juuso Oikarinen authored
Instead of hardcoding 11a support, enable/disable driver support based on the dual-mode-select parameter in the nvs-file general paramters. Signed-off-by:
-
Juuso Oikarinen authored
The function is not used anywhere. Signed-off-by:
-
Juuso Oikarinen authored
The current order causes driver releasing to fail in various ways, and causes possible instability. Signed-off-by:
-
Juuso Oikarinen authored
It's not used anywhere. Signed-off-by:
-
Juuso Oikarinen authored
This removes a fixme. Also, it removes a redundant setting of the wake-up conditions when exiting power save mode, which should improve performance. Signed-off-by:
-
Juuso Oikarinen authored
Remove outdated FIXME's from the code. Signed-off-by:
-
Juuso Oikarinen authored
The mac80211 inserts channels into a scan request in the same order the driver registers them. Use this fact to optimize scan by ordering the channels so that adjacent channels don't get scanned consecutively. Signed-off-by:
-
Luciano Coelho authored
When we get no SSIDs in the scan request, we should force a passive scan in all channels. This patch adds code to force the passive scan flag to be set in that case. Signed-off-by:
-
Luciano Coelho authored
This code was a leftover of the previous scanning mechanism. The if is totally unnecessary, since both branches do the same thing. Signed-off-by:
-
Juuso Oikarinen authored
In the scan state machine, the wl1271_mutex is unlocked first then relocked, and then the scan state variables are modified. This makes it possible for ieee80211_scan_complete to be called twice in some scenarios, as the scan completion event from the firmware may be processed while the mutex is unlocked. To fix the issue, move the ieee80211_scan_complete call last in the function. This is generally safer, but there still may be issues is functions calling the scan state machine rely on states checked before the unlocking of the global mutex. (forward ported from 2.6.32 -- this is not strictly needed anymore, because the mutex doesn't need to be unlocked anymore, but I'm applying this change anyway, so that the call to ieee80211_scan_complete is in the same place) Signed-off-by:
Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by:
-
Juuso Oikarinen authored
Add a trigger to net_device changes to monitor for oper_state changes in order to be able to inform the firmware when association is fully complete (including the EAP negotiation.) Signed-off-by:
-
Juuso Oikarinen authored
Implement the command function to send CMD_SET_STA_STATE to the firmware. This is used to indicate that association (and the related EAP negotiation) are complete. This is used to tune WLAN-BT coexistense priority towards BT, improving BT A2DP and SCO performance. Signed-off-by:
-
Luciano Coelho authored
As of Rev. 6.1.0.0.335, the ACX_SET_SMART_REFLEX_DEBUG command is deprecated. This patch removes it from the wl1271 driver (it wasn't used anyway). Signed-off-by:
-
- 27 Sep, 2010 12 commits
-
-
Rajkumar Manoharan authored
The following commit removed splitmic. But forgot to add ATH_CRYPT_CAP_MIC_COMBINED flag for HTC drivers which causes TKIP to fail. Author: Bruno Randolf <br1@einfach.org> Date: Wed Sep 8 16:04:54 2010 +0900 ath/ath9k: Replace common->splitmic with a flag Replace common->splitmic with ATH_CRYPT_CAP_MIC_COMBINED flag. Signed-off-by:Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by:
-
Johannes Berg authored
commit 8c0c709e Author: Johannes Berg <johannes@sipsolutions.net> Date: Wed Nov 25 17:46:15 2009 +0100 mac80211: move cmntr flag out of rx flags moved the CMNTR flag into the skb RX flags for some aggregation cleanups, but this was wrong since the optimisation this flag tried to make requires that it is kept across the processing of multiple interfaces -- which isn't true for flags in the skb. The patch not only broke the optimisation, it also introduced a bug: under some (common!) circumstances the flag will be set on an already freed skb! However, investigating this in more detail, I found that most of the flags that we set should be per packet, _except_ for this one, due to a-MPDU processing. Additionally, the flags used for processing (currently just this one) need to be reset before processing a new packet. Since we haven't actually seen bugs reported as a result of the wrong flags handling (which is not too surprising -- the only real bug case I can come up with is an a-MSDU contained in an a-MPDU), I'll make a different fix for rc. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Even if the reorder timeout timer fires while scanning, the frames weren't received during scanning and therefore shouldn't be dropped. To implement this, changes to the passive scan RX handler simplify understanding it, because it currently checks HW_SCANNING independently of a packet's in-scan receive status (which doesn't make a big difference, since scan_rx() will only pick up probe responses and beacons, which can't be aggregated.) Signed-off-by:
-
Johannes Berg authored
If a station was found, then we'll have exited the function already, so it is not necessary to have a variable keeping track of it. Signed-off-by:
-
Johannes Berg authored
There are now four instances of vaguely the same code that does packet preparation, checking for MMIC errors and reporting them, and then invoking packet processing. Consolidate all of these. Signed-off-by:
-
Johannes Berg authored
The first argument to prepare_for_handlers is always the sdata that can just be stored in rx data directly (and even already is, in two of four code paths.) Signed-off-by:
-
John W. Linville authored
This reverts commit cd87a2d3. Author reports it conflicts with proper fixes, applied hereafter. Signed-off-by:
-
Teemu Paasikivi authored
If interface does not existk, when nl80211_set_power_save is called, (eg. module has been unloaded) it has been causing kernel panic. Added new goto target to avoid crash if get_rdev_dev_by_info_ifindex does not return dev and rdev pointers. Signed-off-by:
-
Ben Greear authored
When using multiple STA interfaces on the same radio, some data packets need to be received on all interfaces (broadcast, for instance). Make the STA loop look similar to the mgt-data loop. Also, add logic to check RX_FLAG_MMIC_ERROR for last interface in mgt-data loop. Signed-off-by:
Ben Greear <greearb@candelatech.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Ben Greear authored
The old ieee80211_find_sta_by_hw method didn't properly find VIFS when there was more than one per AP. This caused AMPDU logic in ath9k to get the wrong VIF when trying to account for transmitted SKBs. This patch changes ieee80211_find_sta_by_hw to take a localaddr argument to distinguish between VIFs with the same AP but different local addresses. The method name is changed to ieee80211_find_sta_by_ifaddr. Signed-off-by:
-
Ben Greear authored
Create 'stations' sub-directory under each netdev:[vif-name] directory to hold all stations for that network device. Signed-off-by:
-
Felix Fietkau authored
Since AR9287 v1.0 was never sold (and the initvals removed), its revision checks can be simplified similar to AR9280 Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
