- 13 May, 2011 7 commits
-
-
Takashi Iwai authored
Handle not only a single-depth input-route but two-level depth routes (PIN->MUX->ADC), too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Keep the registered input-pins in imux_pins[], and fix the inconsistent use of sepc->auto_mic_ext. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Extend the existing auto-parser for CX2064x for cxt5051 codec. Now the auto-parser supports ADC-switching for this codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some codecs have no mute caps in audio I/O widgets. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Instead of keeping always EAPD on, turn on/off appropriately at jack plugging in Conexant auto-parser mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The wrong id is assigned for external/internal mics in the auto-mic selection parser. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 May, 2011 1 commit
-
-
Takashi Iwai authored
AMD chipsets often behave pretty badly regarding the DMA position reporting. It results in the bad quality audio recording. Using position_fix=3 works well in general for them, so let's enable it as default for AMD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 03 May, 2011 1 commit
-
-
Raymond Yau authored
Fix NULL-dereference when try to use alt_playback since those codecs which support multistreaming playback usually have more than 1 adc but the driver should create alt_capture when spec->stream_analog_alt_capture is also defined. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 02 May, 2011 17 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
The check of chained fixup list entry was done against the wrong element. A stupid mistake during refactoring. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Also fixed the assignment of multiout.dac_nids to satisfy const. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
This reverts commit c6b35874. It turned out that there are different pin configurations for this PCI SSID, including multi-channel modes. And more proper fix for allowing line-out mutes will come up in 2.6.40 tree, so we won't need this fixup any more there. Reported-by: Andrew Clayton <andrew@digital-domain.net> Reported-by: Emmanuel Benisty <benisty.e@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 29 Apr, 2011 3 commits
-
-
David Henningsson authored
The PCI SSID is 1025:031c and the codec SSID is 1025:031d, so the driver mistakes this for a SKU value, but looking at the numbers, this is obviously wrong. Cc: stable@kernel.org (2.6.38+) BugLink: http://bugs.launchpad.net/bugs/761861Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Helpful for debugging. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel Cordero authored
PC Beep was not being reported as enabled on my EeePC 901: SKU: enable_pcbeep=0x0 Signed-off-by: Daniel Cordero <danielcordero@lavabit.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 Apr, 2011 10 commits
-
-
Wolfgang Breyha authored
This patch adds support for the Terratec Aureon 7.1 USB which uses a C-Media cm6206 and needs all the quirks already found in the past. Signed-off-by: Wolfgang Breyha <wbreyha@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The Auto-Mute Mode control is useful even when only two outputs (e.g. HP and speaker) are available. Then user can enable/disable the auto-mute behavior on the fly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Not only supporting the line-out automute as additional feature to the existing headphone automute, now the headphone jack can mute the line-out alone even without the speaker outs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
By popular demands, I add the functionality to mute / unmute the line-out jacks per the headphone plug / unplug. For achieving this and keeping the compatibility with the old behavior, the new mixer enum "Auto-Mute Mode" is added. With this, user can control the auto-mute behavior either disabled, speaker-only or lineout+speaker. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Removed the redundant codes by replacing with the common helper functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Yet another consolidation of auto-mute functions for the devices controlling the output muts together with the master mixer switch, typically found for ALC262 machines. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Add the common helper function and flags to support the auto-mute per line-out jack detection, and also the mute of line-out jacks. A few model-specific implementations are replaced with the common helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some models do mute on/off the connected mixer widget for the automatic muting, instead of controlling the pin widget itself. This patch adds the implementation of such type of auto-mute in the common helper function, and reduces the redundant codes for each model preset. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
There are two entry points for the headphone automute functions for Realtek, alc_automute_amp() and alc_automute_pin(). These call the same function in the end, so we can basically consolidate these with a flag in spec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Lydia Wang authored
In notify_aa_path_ctls(), adds 'rear mic' item and confirms the A-A path control existing before notifying card that the A-A path volume is muted if smart5.1 is enabled. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 27 Apr, 2011 1 commit
-
-
Raymond Yau authored
This allow application such as gstreamer and wine which use snd_pcm_hw_params_set_buffer_time_near() won't fail any more since sound chips require special containt power 2 period bytes Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-