- 25 Aug, 2014 6 commits
-
-
Peter Chen authored
The roothub's index per controller is from 0, but the hub port index per hub is from 1, this patch fixes "can't find device at roohub" problem for connecting test fixture at roohub when do USB-IF Embedded Host High-Speed Electrical Test. This patch is for v3.12+. Cc: stable@vger.kernel.org Signed-off-by:
Peter Chen <peter.chen@freescale.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark authored
The uSCSI from Newer Technology is a SCSI-USB converter with USB ID 06ca:2003. Like several other SCSI-USB products, it's a Shuttle Technology OEM device. Without a suitable entry in unusual-devs.h, the converter can only access the (single) device with SCSI ID 0. Copying the entry for device 04e6:0002 allows it to work with devices with other SCSI IDs too. There are currently six entries for Shuttle-developed SCSI-USB devices in unusual-devs.h (grep for euscsi): 04e6:0002 Shuttle eUSCSI Bridge USB_SC_DEVICE, USB_PR_DEVICE 04e6:000b Shuttle eUSCSI Bridge USB_SC_SCSI, USB_PR_BULK 04e6:000c Shuttle eUSCSI Bridge USB_SC_SCSI, USB_PR_BULK 050d:0115 Belkin USB SCSI Adaptor USB_SC_SCSI, USB_PR_BULK 07af:0004 Microtech USB-SCSI-DB25 USB_SC_DEVICE, USB_PR_DEVICE 07af:0005 Microtech USB-SCSI-HD50 USB_SC_DEVICE, USB_PR_DEVICE lsusb -v output for the uSCSI lists bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) This patch adds an entry for the uSCSI to unusual_devs.h. Signed-off-by:
Mark Knibbs <markk@clara.co.uk> Signed-off-by:
-
Valentina Manea authored
This patch adds an entry in MAINTAINERS file for USB/IP driver. Signed-off-by:
Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by:
-
Valentina Manea authored
This was used back when usbip-host was an interface device driver; after the conversion to device driver, the table remained unused. Remove it in order to stop receiving a warning about it. Signed-off-by:
-
Valentina Manea authored
At this point, USB/IP kernel code is fully functional and can be moved out of staging. Signed-off-by:
-
Valentina Manea authored
At this point, USB/IP userspace code is fully functional and can be moved out of staging. Signed-off-by:
-
- 24 Aug, 2014 2 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'fixes-for-v3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into work-linus Felipe writes: usb: fixes for v3.17-rc2 Here's our first set of fixes for v3.17-rc cycle. Most fixes are pretty minor changes like the signedness bug in dwc3, or the wrong string format on MUSB. The most interesting part is the addition of Intel Quark X1000 support to PCH UDC. Signed-of-by:
Felipe Balbi <balbi@ti.com>
-
James Forshaw authored
This patch fixes a potential security issue in the whiteheat USB driver which might allow a local attacker to cause kernel memory corrpution. This is due to an unchecked memcpy into a fixed size buffer (of 64 bytes). On EHCI and XHCI busses it's possible to craft responses greater than 64 bytes leading a buffer overflow. Signed-off-by:
James Forshaw <forshaw@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
- 23 Aug, 2014 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'usb-serial-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into work-linus Johan writes: USB-serial fixes for v3.17-rc2 These updates fix the log level for some option log messages that started bothering people after a recent change. They also fix some issues reported against the zte_ev driver by moving most device ids back from the zte_ev driver to the option driver (and removing two duplicate ids). The zte_ev driver is planned to be removed in 3.18. Some new device ids are also added. Signed-off-by:
Johan Hovold <johan@kernel.org>
-
- 20 Aug, 2014 2 commits
-
-
Philippe Reynes authored
The variable $(PWD) is useless, and it may break the compilation. For example, it breaks the kernel compilation when it's done with buildroot : /home/trem/Codes/armadeus/armadeus/buildroot/output/host/usr/bin/ccache /home/trem/Codes/armadeus/armadeus/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc -Wp,-MD,drivers/usb/gadget/legacy/.hid.o.d -nostdinc -isystem /home/trem/Codes/armadeus/armadeus/buildroot/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.7.3/include -I./arch/arm/include -Iarch/arm/include/generated -Iinclude -I./arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-dwarf2-cfi-asm -mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp -funwind-tables -marm -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm9tdmi -msoft-float -Uarm -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fno-stack-protector -Wno-unused-but-set-variable -fomit-frame-pointer -fno-var-tracking-assignments -g -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -DCC_HAVE_ASM_GOTO -I/home/trem/Codes/armadeus/armadeus/buildroot/drivers/usb/gadget/ -I/home/trem/Codes/armadeus/armadeus/buildroot/drivers/usb/gadget/udc/ -I/home/trem/Codes/armadeus/armadeus/buildroot/drivers/usb/gadget/function/ -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(hid)" -D"KBUILD_MODNAME=KBUILD_STR(g_hid)" -c -o drivers/usb/gadget/legacy/hid.o drivers/usb/gadget/legacy/hid.c drivers/usb/gadget/epautoconf.c:23:26: erreur fatale: gadget_chips.h : Aucun fichier ou dossier de ce type This compilation line include : ..../buildroot/driver/usb/gadget but the real path is : ..../buildroot/output/build/linux-3.17-rc1/driver/usb/gadget Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
Bryan O'Donoghue authored
This patch is to enable the USB gadget device for Intel Quark X1000 Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@intel.com> Signed-off-by:
Bing Niu <bing.niu@intel.com> Signed-off-by:
Alvin (Weike) Chen <alvin.chen@intel.com> Signed-off-by:
-
- 19 Aug, 2014 20 commits
-
-
Michael Grzeschik authored
If the pending buffers in the queue could not be pushed to the udc endpoint we have to cancel the uvc_queue. Otherwise the gadget will get stuck on this error. This patch calls uvc_queue_cancel if usb_ep_queue failed. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
-
Peter Chen authored
linux-2.6/drivers/usb/wusbcore/wa-xfer.c: In function 'wa_buf_in_cb': linux-2.6/drivers/usb/wusbcore/wa-xfer.c:2590: warning: 'rpipe' may be used uninitialized in this function Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
-
Peter Chen authored
linux-2.6/drivers/usb/core/hub.c: In function 'usb_disconnect': linux-2.6/drivers/usb/core/hub.c:2110: warning: 'hub' may be used uninitialized in this function linux-2.6/drivers/usb/core/hub.c:2111: warning: 'port1' may be used uninitialized in this function Signed-off-by:
-
Peter Chen authored
linux-2.6/drivers/usb/dwc2/gadget.c: In function 's3c_hsotg_irq_enumdone': linux-2.6/drivers/usb/dwc2/gadget.c:1904: warning: 'ep_mps' may be used uninitialized in this function Acked-by:
Paul Zimmerman <Paul.Zimmerman@synopsys.com> Signed-off-by:
-
Mathias Nyman authored
When we manually need to move the TR dequeue pointer we need to set the correct cycle bit as well. Previously we used the trb pointer from the last event received as a base, but this was changed in commit 1f81b6d2 ("usb: xhci: Prefer endpoint context dequeue pointer") to use the dequeue pointer from the endpoint context instead It turns out some Asmedia controllers advance the dequeue pointer stored in the endpoint context past the event triggering TRB, and this messed up the way the cycle bit was calculated. Instead of adding a quirk or complicating the already hard to follow cycle bit code, the whole cycle bit calculation is now simplified and adapted to handle event and endpoint context dequeue pointer differences. Fixes: 1f81b6d2 ("usb: xhci: Prefer endpoint context dequeue pointer") Reported-by:
Maciej Puzio <mx34567@gmail.com> Reported-by:
Evan Langlois <uudruid74@gmail.com> Reviewed-by:
Julius Werner <jwerner@chromium.org> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Huang Rui authored
AMD xHC also needs short tx quirk after tested on most of chipset generations. That's because there is the same incorrect behavior like Fresco Logic host. Please see below message with on USB webcam attached on xHC host: [ 139.262944] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.266934] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.270913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.274937] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.278914] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.282936] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.286915] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.290938] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.294913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.298917] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? Reported-by:
Arindam Nath <arindam.nath@amd.com> Tested-by:
Shriraj-Rai P <shriraj-rai.p@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Hans de Goede authored
When using a Renesas uPD720231 chipset usb-3 uas to sata bridge with a 120G Crucial M500 ssd, model string: Crucial_ CT120M500SSD1, together with a the integrated Intel xhci controller on a Haswell laptop: 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) The following error gets logged to dmesg: xhci error: Transfer event TRB DMA ptr not part of current TD Treating COMP_STOP the same as COMP_STOP_INVAL when no event_seg gets found fixes this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Takashi Iwai authored
The commit [5ee0f803: usbcore: don't log on consecutive debounce failures of the same port] added the check of the reliable port, but it also replaced the device argument to dev_err() wrongly, which leads to a NULL dereference. This patch restores the right device, port_dev->dev. Also, since dev_err() itself shows the port number, reduce the port number shown in the error message, essentially reverting to the state before the commit 5ee0f803. [The fix suggested by Hannes, and the error message cleanup suggested by Alan Stern] Fixes: 5ee0f803 ('usbcore: don't log on consecutive debounce failures of the same port') Reported-by:
Hannes Reinecke <hare@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Li RongQing authored
This reverts commit a9232076. It introduced a dead lock, and did not fix anything. it made netif_tx_lock() be called in IRQ context, but in softirq context, the same lock is locked without disabling IRQ. In fact, the commit a9232076 did not fix anything, since netif_stop_queue did not free the any resource [ 10.154920] ================================= [ 10.156026] [ INFO: inconsistent lock state ] [ 10.156026] 3.16.0-rc5+ #13 Not tainted [ 10.156026] --------------------------------- [ 10.156026] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 10.156026] swapper/1/0 [HC0[0]:SC1[5]:HE1:SE0] takes: [ 10.156026] (_xmit_ETHER){?.-...}, at: [<80948b6a>] sch_direct_xmit+0x7a/0x250 [ 10.156026] {IN-HARDIRQ-W} state was registered at: [ 10.156026] [<804811f0>] __lock_acquire+0x800/0x17a0 [ 10.156026] [<804828ba>] lock_acquire+0x6a/0xf0 [ 10.156026] [<809ed477>] _raw_spin_lock+0x27/0x40 [ 10.156026] [<8088d508>] gether_disconnect+0x68/0x280 [ 10.156026] [<8088e777>] eem_set_alt+0x37/0xc0 [ 10.156026] [<808847ce>] composite_setup+0x30e/0x1240 [ 10.156026] [<8088b8ae>] pch_udc_isr+0xa6e/0xf50 [ 10.156026] [<8048abe8>] handle_irq_event_percpu+0x38/0x1e0 [ 10.156026] [<8048adc1>] handle_irq_event+0x31/0x50 [ 10.156026] [<8048d94b>] handle_fasteoi_irq+0x6b/0x140 [ 10.156026] [<804040a5>] handle_irq+0x65/0x80 [ 10.156026] [<80403cfc>] do_IRQ+0x3c/0xc0 [ 10.156026] [<809ee6ae>] common_interrupt+0x2e/0x34 [ 10.156026] [<804668c5>] finish_task_switch+0x65/0xd0 [ 10.156026] [<809e89df>] __schedule+0x20f/0x7d0 [ 10.156026] [<809e94aa>] schedule_preempt_disabled+0x2a/0x70 [ 10.156026] [<8047bf03>] cpu_startup_entry+0x143/0x410 [ 10.156026] [<809e2e61>] rest_init+0xa1/0xb0 [ 10.156026] [<80ce2a3b>] start_kernel+0x336/0x33b [ 10.156026] [<80ce22ab>] i386_start_kernel+0x79/0x7d [ 10.156026] irq event stamp: 52070 [ 10.156026] hardirqs last enabled at (52070): [<809375de>] neigh_resolve_output+0xee/0x2a0 [ 10.156026] hardirqs last disabled at (52069): [<809375a8>] neigh_resolve_output+0xb8/0x2a0 [ 10.156026] softirqs last enabled at (52020): [<8044401f>] _local_bh_enable+0x1f/0x50 [ 10.156026] softirqs last disabled at (52021): [<80404036>] do_softirq_own_stack+0x26/0x30 [ 10.156026] [ 10.156026] other info that might help us debug this: [ 10.156026] Possible unsafe locking scenario: [ 10.156026] [ 10.156026] CPU0 [ 10.156026] ---- [ 10.156026] lock(_xmit_ETHER); [ 10.156026] <Interrupt> [ 10.156026] lock(_xmit_ETHER); [ 10.156026] [ 10.156026] *** DEADLOCK *** [ 10.156026] [ 10.156026] 4 locks held by swapper/1/0: [ 10.156026] #0: (((&idev->mc_ifc_timer))){+.-...}, at: [<8044b100>] call_timer_fn+0x0/0x190 [ 10.156026] #1: (rcu_read_lock){......}, at: [<a0577c40>] mld_sendpack+0x0/0x590 [ipv6] [ 10.156026] #2: (rcu_read_lock_bh){......}, at: [<a055680c>] ip6_finish_output2+0x4c/0x7f0 [ipv6] [ 10.156026] #3: (rcu_read_lock_bh){......}, at: [<8092e510>] __dev_queue_xmit+0x0/0x5f0 [ 10.156026] [ 10.156026] stack backtrace: [ 10.156026] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc5+ #13 [ 10.156026] 811dbb10 00000000 9e919d10 809e6785 9e8b8000 9e919d3c 809e561e 80b95511 [ 10.156026] 80b9545a 80b9543d 80b95450 80b95441 80b957e4 9e8b84e0 00000002 8047f7b0 [ 10.156026] 9e919d5c 8048043b 00000002 00000000 9e8b8000 00000001 00000004 9e8b8000 [ 10.156026] Call Trace: [ 10.156026] [<809e6785>] dump_stack+0x48/0x69 [ 10.156026] [<809e561e>] print_usage_bug+0x18f/0x19c [ 10.156026] [<8047f7b0>] ? print_shortest_lock_dependencies+0x170/0x170 [ 10.156026] [<8048043b>] mark_lock+0x53b/0x5f0 [ 10.156026] [<804810cf>] __lock_acquire+0x6df/0x17a0 [ 10.156026] [<804828ba>] lock_acquire+0x6a/0xf0 [ 10.156026] [<80948b6a>] ? sch_direct_xmit+0x7a/0x250 [ 10.156026] [<809ed477>] _raw_spin_lock+0x27/0x40 [ 10.156026] [<80948b6a>] ? sch_direct_xmit+0x7a/0x250 [ 10.156026] [<80948b6a>] sch_direct_xmit+0x7a/0x250 [ 10.156026] [<8092e6bf>] __dev_queue_xmit+0x1af/0x5f0 [ 10.156026] [<80947fc0>] ? ether_setup+0x80/0x80 [ 10.156026] [<8092eb0f>] dev_queue_xmit+0xf/0x20 [ 10.156026] [<8093764c>] neigh_resolve_output+0x15c/0x2a0 [ 10.156026] [<a0556927>] ip6_finish_output2+0x167/0x7f0 [ipv6] [ 10.156026] [<a0559b05>] ip6_finish_output+0x85/0x1c0 [ipv6] [ 10.156026] [<a0559cb7>] ip6_output+0x77/0x240 [ipv6] [ 10.156026] [<a0578163>] mld_sendpack+0x523/0x590 [ipv6] [ 10.156026] [<80480501>] ? mark_held_locks+0x11/0x90 [ 10.156026] [<a057947d>] mld_ifc_timer_expire+0x15d/0x280 [ipv6] [ 10.156026] [<8044b168>] call_timer_fn+0x68/0x190 [ 10.156026] [<a0579320>] ? igmp6_group_added+0x150/0x150 [ipv6] [ 10.156026] [<8044b3fa>] run_timer_softirq+0x16a/0x240 [ 10.156026] [<a0579320>] ? igmp6_group_added+0x150/0x150 [ipv6] [ 10.156026] [<80444984>] __do_softirq+0xd4/0x2f0 [ 10.156026] [<804448b0>] ? tasklet_action+0x100/0x100 [ 10.156026] [<80404036>] do_softirq_own_stack+0x26/0x30 [ 10.156026] <IRQ> [<80444d05>] irq_exit+0x65/0x70 [ 10.156026] [<8042d758>] smp_apic_timer_interrupt+0x38/0x50 [ 10.156026] [<809ee91f>] apic_timer_interrupt+0x2f/0x34 [ 10.156026] [<8048007b>] ? mark_lock+0x17b/0x5f0 [ 10.156026] [<8040a912>] ? default_idle+0x22/0xf0 [ 10.156026] [<8040b13e>] arch_cpu_idle+0xe/0x10 [ 10.156026] [<8047bfc6>] cpu_startup_entry+0x206/0x410 [ 10.156026] [<8042bfbd>] start_secondary+0x19d/0x1e0 Acked-by:
Tony Lindgren <tony@atomide.com> Reported-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Westfahl <jeff.westfahl@ni.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Acked-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function memdup_user() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
-
Dan Carpenter authored
"ret" should be signed. It's only used for zero and negative error codes. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hans Wennborg authored
The prefix suggests the number should be printed in hex, so use the %x specifier to do that. Found by using regex suggested by Joe Perches. Signed-off-by:
Hans Wennborg <hans@hanshq.net> Signed-off-by:
-
Bo Shen authored
As, the interrupt for DMA is counted from 1, so need to checked the USBA_NR_DMAS, in old way, it only check (USBA_NR_DMAS - 1), so fix it. Reported-by:
Max Liao <liaops@embest-tech.com> Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
-
Julia Lawall authored
Convert a zero return value on error to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Jingoo Han authored
According to the datasheet, PHYPARAM1_PCS_TXDEEMPH is set as 6 bits [5:0]. Thus, the bit mask should be set as 0x3f, instead of 0x1f. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Alexey Khoroshilov authored
After dbgp_bind()-dbgp_unbind() cycle happens, static variable dbgp contains pointers to already deallocated memory (dbgp.serial and dbgp.req). If the next dbgp_bind() fails, for example in usb_ep_alloc_request(), dbgp_bind() calls dbgp_unbind() on failure path, and dbgp_unbind() frees dbgp.serial that still stores a pointer to already deallocated memory. The patch sets pointers to NULL in dbgp_unbind(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Himangi Saraogi authored
Using kfree to free data allocated with devm_kzalloc causes double frees. The Coccinelle semantic patch that fixes this problem is as follows: // <smpl> @@ expression x; @@ x = devm_kzalloc(...) ... ?-kfree(x); // </smpl> Reviewed-by:
Himangi Saraogi <himangi774@gmail.com> Signed-off-by:
-
Arjun Sreedharan authored
When __usb_find_phy_dev() does not return error and try_module_get() fails, return -ENODEV. Signed-off-by:
Arjun Sreedharan <arjun024@gmail.com> Signed-off-by:
-
- 18 Aug, 2014 8 commits
-
-
Jaša Bartelj authored
Added support to the ftdi_sio driver for ekey Converter USB which uses an FT232BM chip. Signed-off-by:
Jaša Bartelj <jasa.bartelj@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Greg KH authored
This adds a new device id to the pl2303 driver for the ZTEK device. Reported-by:
Mike Chu <Mike-Chu@prolific.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
Add device id for Basic Micro ATOM Nano USB2Serial adapters. Reported-by:
Nicolas Alt <n.alt@mytum.de> Tested-by:
-
Johan Hovold authored
Remove dublicate Qualcom PID 0x3197 which is already handled by the moto-modem driver since commit 6986a978 ("USB: add new moto_modem driver for some Morotola phones"). Fixes: 799ee924 ("USB: serial: add zte_ev.c driver") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
Remove dublicate Gobi PID 0x9008 which is already handled by the qcserial driver since commit f05932c0 ("USB: qcserial: Add extra device IDs"). Fixes: 799ee924 ("USB: serial: add zte_ev.c driver") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
This reverts commit 73228a05 ("USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"). Move the IDs of the devices that were previously driven by the option driver back to that driver. As several users have reported, the zte_ev driver is causing random disconnects as well as reconnect failures. A closer analysis of the zte_ev setup code reveals that it consists of standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE) but unfortunately fails to get some of those right. In particular, as reported by Liu Lei, it fails to lower DTR/RTS on close. It also appears that the control requests lack the interface argument. Note that the zte_ev driver is based on code (once) distributed by ZTE that still appears to originally have been reverse-engineered and bolted onto the generic driver. Since line control is already handled properly by the option driver, and the SET/GET_LINE_CODING requests appears to be redundant (amounts to a SET 9600 8N1), this is a first step in ultimately removing the redundant zte_ev driver. Note that AC2726 had already been moved back to option, and that some IDs were in the device table of both drivers prior to the commit being reverted. Reported-by:
Lei Liu <liu.lei78@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Brennan Ashton authored
This VIA Telecom baseband processor is used is used by by u-blox in both the FW2770 and FW2760 products and may be used in others as well. This patch has been tested on both of these modem versions. Signed-off-by:
Brennan Ashton <bashton@brennanashton.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
Do not log normal interrupt-urb shutdowns as errors. The option driver has always been logging any nonzero interrupt-urb status as an error, including when the urb is killed during normal operation. Commit 9096f1fb ("USB: usb_wwan: fix potential NULL-deref at resume") moved the interrupt urb submission from port probe and release to open and close, thus potentially increasing the number of these false-positive error messages dramatically. Reported-by:
Ed Butler <ressy66@ausics.net> Tested-by:
-
- 16 Aug, 2014 1 commit
-
-
Linus Torvalds authored
-
