get_word understands both \x and \012 quoting styles.

This is the first upcall to actually be coded.
A request will look like:
   nfsd 127.0.0.1

This code enhances 'cache_check' to try to initiate
an up-call if the cache entry is not up-to-date, and also
defines add_word and add_hex for formating up-call
requests.  See rpc-cache.txt for more detail.

[PATCH] kNFSd: Create files: /proc/net/rpc/$CACHENAME/channel for communicating cache updates with kernel

Each cache gets it's own 'channel' at
  /proc/net/rpc/$CACHENAME/channel

Reads from the file will return all pending requests, one at a time.
select will block when at end of file.
writes will pass full lines in to be processed.

cache.c gets code to allow a 'request' to be referred pending
an update of a cache item, and revisited when the item is
updates.

svcsock.c gets code to store the relevant part of a request on deferral, and
to re-queue it when the cache item that caused the deferral is
filled in.

Rather than possibly modifying a request (as
xdr_decode_string can) we use xdr_decode_string_inplace
to symlink contents.  This string may not be nul terminated
(though it often is) so in the 'unlikely' event that is isn't
nul terminated, we copy it into a kmalloced space first.

It might be nice if vfs_symlink took a length, but then every
filesystem would have to as well....

We are going to want rpc request to be immutable so that
we can take a copy and put it aside to be processed later.
Currently the tcp code writes the response into the same
buffer as the request, thus corrupting the request.
With this patch, the response goes after the request.  There should
always be enough room as large reqeusts (Write) has small
responses, and large responses (read) are for small requests.

buflen is changed for requests to record the length of the
request.  It already gets reset for each new request.

This introduces two caches, svc_export_cache (nfsd.exports) and
svc_expkey_cache (nfsd.fh).
nfsd.exports maps client+directory  ->  export options.
nfsd.fh maps client + filehandle-fragment -> directory.

A major part of this change is that export entries are now reference counted,
so we have to be careful  to keep those counts correct.

Instead of doing the lookup from ipaddr to domain inside
the nfs server, (and also when lockd calls into nfsd) it is
now done at the rpc authentication level which is a more
sensible place for it.

Note that both AUTH_UNIX and AUTH_NULL do the same lookup.

So that the rpc layer knows that nfsd and lockd both uses the
name space of domains (while other hypothetical services may
not) we introduce a 'class' for each service which svc_auth combines
with the IP address when doing a lookup.

This patch introduces two caches using the new infrastucture, and the
concept of a 'domain'.

A 'domain' refers to a collection of clients that all have the same
view of the nfs server, and all have the same access rights (modulo
different users on the clients).  For AUTH_UNIX (and AUTH_NULL), the
domain is determined from the IP address.  For other authentication
styles, the domain might be determined directly from the credentials.

Each auth flavour knows how to allocate and free it's domain-specific
infomation.

auth_domain_cache maps a name to a domain which is owned by
an auth flavour.

ip_map_cache is a cache specific to AUTH_UNIX which maps
IP address to domain.

With this patch, svcauth_unix.c is created to store all
auth_unix related code.

The IP address lookup code is removed from nfsd/exports.c

sunrpc module initilisation is moved out of stats.c into sunrpc_syms
which seemed to be the most central .c file.  It now registers these
two caches.

Now that the caches are being used, nfsd needs to call cache_clean
periodically.

This patch provides a "virtual class" for defining caches
that make user-space information available in the kernel
It is intended for RPC services or clients that need user-space
support for authentication.

As yet, support for userspace interaction isn't included as I want
that to be able to have separate review.

Define auth_ops that contains a method for authenticating a request and a
method for authorising a reply.  Call both methods as appropriate.

Also discard rq_verfed and cr_flavour, neither ever used.
And discard rq_auth as it isn't needed.

Now that all the hooks are in place, this large patch imports all
of the new code for the NFSv4 server.

This patch makes almost no changes to the existing nfsd codebase
(these have been taken care of by the preceding patches).

One aspect of the NFSv4 code deserves comment.  The most natural scheme
for processing a COMPOUND request would seem to be:
  1a. XDR decode phase, decode args of all operations
  2a. processing phase, process all operations
  3a. XDR encode phase, encode results of all operations

However, we use a scheme which works as follows:
  1b. XDR decode phase, decode args of all operations
  2b. For each operation,
        process the operation
        encode the result

To see what is wrong with the first scheme, consider a COMPOUND
of the form READ REMOVE.  Since the last bit of processing for
the READ request occurs in XDR encode, we might discover in step
3a that the READ request should return an error.  Therefore, the
REMOVE request should not be processed at all.  This is a fatal
problem, since the REMOVE was already been done in step 2a!

Another type of problem would occur in a COMPOUND of the form
READ WRITE.  Assume that both operations succeed.  Under scheme
(a), the WRITE is actually performed _before_ the READ (since
the "real" READ is really done during XDR encode).  This is
certainly incorrect if the READ and WRITE ranges overlap.

These examples might seem a little artificial, but nevertheless
it does seem that in order to process a COMPOUND correctly in
all cases, we need to use scheme (b) instead of scheme (a).

(To construct less artificial examples, just substitute GETATTR
 for READ in the examples above.  This works because the "real"
 GETATTR is done during XDR encode: one would really have to
 bend over backwards in order to arrange things otherwise.)

NFSv4 need to be able to make from user/group name
to user/group id.  This include file contains some
simple stubs to do this.  They will be replaced with
something that really works later.

This patch changes the 'xdrsize' parameter to svc_create(), to be
     NFS4_SVC_XDRSIZE   if v4 is defined
else NFS3_SVC_XDRSIZE   if v3 is defined
else NFS2_SVC_XDRSIZE     (formerly NFSSVC_XDRSIZE)

This always works, since
     NFS4_SVC_XDRSIZE >= NFS3_SVC_XDRSIZE >= NFS2_SVC_XDRSIZE.

The value of NFSD_BUFSIZE has also been moved to const.h, since we need
the definition available in nfs4proc.c

NFSv4 has a concept of a 'root' filehandle (from which all other can
be found via LOOKUP, so no need for mountd).

This patch defines exp_pseudoroot(), which is used to set the filehandle
for the root of the pseudofs. The root is defined to be the export
point with fsid == 0.

Define fh_dup2(), which copies a _verified_ filehandle, taking care
of refcounts accordingly.  (This will be used by RESTOREFH/SAVEFH and
a few other places.)

Instantiate a new file include/linux/nfsd/xdr4.h (server-side XDR for
NFSv4).

All the lockd *_msg requests are implemented by
calling the equivalent non- *_msg request and sending off
the response as a new message (*_res).

For the non- *_msg requests, the response buffer is
pre-zeroed by the RPC layer, but the *_msg handlers weren't
pre-zeroing the buffer, would could in some circumstances lead to
an Oops.

Now we pre-zero them all.

Thanks to Hirokazu Takahashi <taka@valinux.co.jp>

Symlinks in NFSv3 can be upto 1024 bytes, not 256 like nfsv2.

It only gets spam these days...

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk

Don't release NULL resources.

Patch from William Lee Irwin II.

A trivial loose end: add a 'lease_time' field to 'struct nfs_fsinfo'.

Now that all calls to nfs_async_handle_jukebox() have been moved to
fs/nfs/nfs3proc.c, we clean up by moving the nfs_async_jukebox() routine
itself there.  We also rename it nfs3_async_handle_jukebox(), to be
consistent with the naming conventions of that file.

In NFSv3, an RPC is retried if the special error NFSERR_JUKEBOX is
received.  This generic bit of postprocessing happens invisibly for
synchronous RPC's, but in the async case, the ->tk_exit callback
must call nfs_async_handle_jukebox() by hand.

In NFSv4, we also need generic postprocessing of async RPC's, but
the details are different.  Therefore, we don't want to call
nfs_async_handle_jukebox(); we want to call a different, NFSv4-specific
routine.  Therefore, we want to move calls to nfs_async_handle_jukebox()
out of the "generic" NFS code and into NFSv3-specific routines.  This
has already been done for async READ and WRITE in the preceding patches,
but there is still one outstanding case: the async REMOVE in sillyrename.

This patch removes nfs_async_handle_jukebox() from the async sillyrename
path, and puts in the NFSv3 ->unlink_done() rpc_op.

This is a nontrivial change to the NFS client.

This patch does for the async WRITE and COMMIT paths what patch 15
did for the async READ path, by defining new nfs_rpc_ops ->setup_write()
and ->setup_commit().