Skip to content

L
linux
Switch branch/tag
  1. 31 May, 2019 2 commits
    • brakmo's avatar
      bpf: cgroup inet skb programs can return 0 to 3 · 5cf1e914
      brakmo authored 
      Allows cgroup inet skb programs to return values in the range [0, 3].
The second bit is used to deterine if congestion occurred and higher
level protocol should decrease rate. E.g. TCP would call tcp_enter_cwr()

The bpf_prog must set expected_attach_type to BPF_CGROUP_INET_EGRESS
at load time if it uses the new return values (i.e. 2 or 3).

The expected_attach_type is currently not enforced for
BPF_PROG_TYPE_CGROUP_SKB.  e.g Meaning the current bpf_prog with
expected_attach_type setting to BPF_CGROUP_INET_EGRESS can attach to
BPF_CGROUP_INET_INGRESS.  Blindly enforcing expected_attach_type will
break backward compatibility.

This patch adds a enforce_expected_attach_type bit to only
enforce the expected_attach_type when it uses the new
return value.
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarMartin KaFai Lau <kafai@fb.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      5cf1e914
    • brakmo's avatar
      bpf: Create BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY · 1f52f6c0
      brakmo authored 
      Create new macro BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() to be used by
__cgroup_bpf_run_filter_skb for EGRESS BPF progs so BPF programs can
request cwr for TCP packets.

Current cgroup skb programs can only return 0 or 1 (0 to drop the
packet. This macro changes the behavior so the low order bit
indicates whether the packet should be dropped (0) or not (1)
and the next bit is used for congestion notification (cn).

Hence, new allowed return values of CGROUP EGRESS BPF programs are:
  0: drop packet
  1: keep packet
  2: drop packet and call cwr
  3: keep packet and call cwr

This macro then converts it to one of NET_XMIT values or -EPERM
that has the effect of dropping the packet with no cn.
  0: NET_XMIT_SUCCESS  skb should be transmitted (no cn)
  1: NET_XMIT_DROP     skb should be dropped and cwr called
  2: NET_XMIT_CN       skb should be transmitted and cwr called
  3: -EPERM            skb should be dropped (no cn)

Note that when more than one BPF program is called, the packet is
dropped if at least one of programs requests it be dropped, and
there is cn if at least one program returns cn.
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      1f52f6c0
  3. 29 May, 2019 15 commits
  5. 28 May, 2019 15 commits
  7. 25 May, 2019 8 commits
    • Matteo Croce's avatar
      samples: bpf: add ibumad sample to .gitignore · d9a6f413
      Matteo Croce authored 
      This commit adds ibumad to .gitignore which is
currently ommited from the ignore file.
Signed-off-by: default avatarMatteo Croce <mcroce@redhat.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      d9a6f413
    • Alexei Starovoitov's avatar
      Merge branch 'optimize-zext' · 198ae936
      Alexei Starovoitov authored 
      Jiong Wang says:

====================
v9:
  - Split patch 5 in v8.
    make bpf uapi header file sync a separate patch. (Alexei)

v8:
  - For stack slot read, mark them as REG_LIVE_READ64. (Alexei)
  - Change DEF_NOT_SUBREG from -1 to 0. (Alexei)
  - Rebased on top of latest bpf-next.

v7:
  - Drop the first patch in v6, the one adding 32-bit return value and
    argument type. (Alexei)
  - Rename bpf_jit_hardware_zext to bpf_jit_needs_zext. (Alexei)
  - Use mov32 with imm == 1 to indicate it is zext. (Alexei)
  - JIT back-ends peephole next insn to optimize out unnecessary zext
    inserted by verifier. (Alexei)
  - Testing:
    + patch set tested (bpf selftest) on x64 host with llvm 9.0
      no regression observed no both JIT and interpreter modes.
    + patch set tested (bpf selftest) on x32 host.
      By Yanqing Wang, thanks!
      no regression observed on both JIT and interpreter modes.
    + patch set tested (bpf selftest) on RV64 host with llvm 9.0,
      By Björn Töpel, thanks!
      no regression observed before and after this set with JIT_ALWAYS_ON.
      test_progs_32 also enabled as LLVM 9.0 is used by Björn.
    + cross compiled the other affected targets, arm, PowerPC, SPARC, S390.

v6:
  - Fixed s390 kbuild test robot error. (kbuild)
  - Make comment style in backends patches more consistent.

v5:
  - Adjusted several test_verifier helpers to make them works on hosts
    w and w/o hardware zext. (Naveen)
  - Make sure zext flag not set when verifier by-passed, for example,
    libtest_bpf.ko. (Naveen)
  - Conservatively mark bpf main return value as 64-bit. (Alexei)
  - Make sure read flag is either READ64 or READ32, not the mix of both.
    (Alexei)
  - Merged patch 1 and 2 in v4. (Alexei)
  - Fixed kbuild test robot warning on NFP. (kbuild)
  - Proposed new BPF_ZEXT insn to have optimal code-gen for various JIT
    back-ends.
  - Conservately set zext flags for patched-insn.
  - Fixed return value zext for helper function calls.
  - Also adjusted test_verifier scalability unit test to avoid triggerring
    too many insn patch which will hang computer.
  - re-tested on x86 host with llvm 9.0, no regression on test_verifier,
    test_progs, test_progs_32.
  - re-tested offload target (nfp), no regression on local testsuite.

v4:
  - added the two missing fixes which addresses two Jakub's reviewes in v3.
  - rebase on top of bpf-next.

v3:
  - remove redundant check in "propagate_liveness_reg". (Jakub)
  - add extra check in "mark_reg_read" to prune more search. (Jakub)
  - re-implemented "prog_flags" passing mechanism, removed use of
    global switch inside libbpf.
  - enabled high 32-bit randomization beyond "test_verifier" and
    "test_progs". Now it should have been enabled for all possible
    tests. Re-run all tests, haven't noticed regression.
  - remove RFC tag.

v2:
  - rebased on top of bpf-next master.
  - added comments for what is sub-register def index. (Edward, Alexei)
  - removed patch 1 which turns bit mask from enum to macro. (Alexei)
  - removed sysctl/bpf_jit_32bit_opt. (Alexei)
  - merged sub-register def insn index into reg state. (Alexei)
  - change test methodology (Alexei):
      + instead of simple unit tests on x86_64 for which this optimization
        doesn't enabled due to there is hardware support, poison high
        32-bit for whose def identified as safe to do so. this could let
        the correctness of this patch set checked when daily bpf selftest
        ran which delivers very stressful test on host machine like x86_64.
      + hi32 poisoning is gated by a new BPF_F_TEST_RND_HI32 prog flags.
      + BPF_F_TEST_RND_HI32 is enabled for all tests of "test_progs" and
        "test_verifier", the latter needs minor tweak on two unit tests,
        please see the patch for the change.
      + introduced a new global variable "libbpf_test_mode" into libbpf.
        once it is set to true, it will set BPF_F_TEST_RND_HI32 for all the
        later PROG_LOAD syscall, the goal is to easy the enable of hi32
        poison on exsiting testsuite.
        we could also introduce new APIs, for example "bpf_prog_test_load",
        then use -Dbpf_prog_load=bpf_prog_test_load to migrate tests under
        test_progs, but there are several load APIs, and such new API need
        some change on struture like "struct bpf_prog_load_attr".
      + removed old unit tests. it is based on insn scan and requires quite
        a few test_verifier generic code change. given hi32 randomization
        could offer good test coverage, the unit tests doesn't add much
        extra test value.
  - enhanced register width check ("is_reg64") when record sub-register
    write, now, it returns more accurate width.
  - Re-run all tests under "test_progs" and "test_verifier" on x86_64, no
    regression. Fixed a couple of bugs exposed:
      1. ctx field size transformation was not taken into account.
      2. insn patch could cause lost of original aux data which is
         important for ctx field conversion.
      3. return value for propagate_liveness was wrong and caused
         regression on processed insn number.
      4. helper call arg wasn't handled properly that path prune may cause
         64-bit read info in pruned path lost.
  - Re-run Cilium bpf prog for processed-insn-number benchmarking, no
    regression.

v1:
  - Fixed the missing handling on callee-saved for bpf-to-bpf call,
    sub-register defs therefore moved to frame state. (Jakub Kicinski)
  - Removed redundant "cross_reg". (Jakub Kicinski)
  - Various coding styles & grammar fixes. (Jakub Kicinski, Quentin Monnet)

eBPF ISA specification requires high 32-bit cleared when low 32-bit
sub-register is written. This applies to destination register of ALU32 etc.
JIT back-ends must guarantee this semantic when doing code-gen. x86_64 and
AArch64 ISA has the same semantics, so the corresponding JIT back-end
doesn't need to do extra work.

However, 32-bit arches (arm, x86, nfp etc.) and some other 64-bit arches
(PowerPC, SPARC etc) need to do explicit zero extension to meet this
requirement, otherwise code like the following will fail.

  u64_value = (u64) u32_value
  ... other uses of u64_value

This is because compiler could exploit the semantic described above and
save those zero extensions for extending u32_value to u64_value, these JIT
back-ends are expected to guarantee this through inserting extra zero
extensions which however could be a significant increase on the code size.
Some benchmarks show there could be ~40% sub-register writes out of total
insns, meaning at least ~40% extra code-gen.

One observation is these extra zero extensions are not always necessary.
Take above code snippet for example, it is possible u32_value will never be
casted into a u64, the value of high 32-bit of u32_value then could be
ignored and extra zero extension could be eliminated.

This patch implements this idea, insns defining sub-registers will be
marked when the high 32-bit of the defined sub-register matters. For
those unmarked insns, it is safe to eliminate high 32-bit clearnace for
them.

Algo
====
We could use insn scan based static analysis to tell whether one
sub-register def doesn't need zero extension. However, using such static
analysis, we must do conservative assumption at branching point where
multiple uses could be introduced. So, for any sub-register def that is
active at branching point, we need to mark it as needing zero extension.
This could introducing quite a few false alarms, for example ~25% on
Cilium bpf_lxc.

It will be far better to use dynamic data-flow tracing which verifier
fortunately already has and could be easily extend to serve the purpose of
this patch set.

 - Split read flags into READ32 and READ64.

 - Record index of insn that does sub-register write. Keep the index inside
   reg state and update it during verifier insn walking.

 - A full register read on a sub-register marks its definition insn as
   needing zero extension on dst register.

   A new sub-register write overrides the old one.

 - When propagating read64 during path pruning, also mark any insn defining
   a sub-register that is read in the pruned path as full-register.

Benchmark
=========
 - I estimate the JITed image could be 10% ~ 30% smaller on these affected
   arches (nfp, arm, x32, risv, ppc, sparc, s390), depending on the prog.

 - For Cilium bpf_lxc, there is ~11500 insns in the compiled binary (use
   latest LLVM snapshot, and with -mcpu=v3 -mattr=+alu32 enabled), 4460 of
   them has sub-register writes (~40%). Calculated by:

    cat dump | grep -P "\tw" | wc -l       (ALU32)
    cat dump | grep -P "r.*=.*u32" | wc -l (READ_W)
    cat dump | grep -P "r.*=.*u16" | wc -l (READ_H)
    cat dump | grep -P "r.*=.*u8" | wc -l  (READ_B)

   After this patch set enabled, > 25% of those 4460 could be identified as
   doesn't needing zero extension on the destination, and the percentage
   could go further up to more than 50% with some follow up optimizations
   based on the infrastructure offered by this set. This leads to
   significant save on JITed image.
====================
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      198ae936
    • Jiong Wang's avatar
      nfp: bpf: eliminate zero extension code-gen · 0b4de1ff
      Jiong Wang authored 
      This patch eliminate zero extension code-gen for instructions including
both alu and load/store. The only exception is for ctx load, because
offload target doesn't go through host ctx convert logic so we do
customized load and ignores zext flag set by verifier.

Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: default avatarJiong Wang <jiong.wang@netronome.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      0b4de1ff
    • Jiong Wang's avatar
      riscv: bpf: eliminate zero extension code-gen · 66d0d5a8
      Jiong Wang authored 
      Cc: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: default avatarBjörn Töpel <bjorn.topel@gmail.com>
Tested-by: default avatarBjörn Töpel <bjorn.topel@gmail.com>
Signed-off-by: default avatarJiong Wang <jiong.wang@netronome.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      66d0d5a8
    • Jiong Wang's avatar
      x32: bpf: eliminate zero extension code-gen · 836256bf
      Jiong Wang authored 
      Cc: Wang YanQing <udknight@gmail.com>
Tested-by: default avatarWang YanQing <udknight@gmail.com>
Signed-off-by: default avatarJiong Wang <jiong.wang@netronome.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      836256bf
    • Jiong Wang's avatar
      sparc: bpf: eliminate zero extension code-gen · 3e2a33cf
      Jiong Wang authored 
      Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: default avatarJiong Wang <jiong.wang@netronome.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      3e2a33cf
    • Jiong Wang's avatar
      s390: bpf: eliminate zero extension code-gen · 591006b9
      Jiong Wang authored 
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: default avatarJiong Wang <jiong.wang@netronome.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      591006b9
    • Jiong Wang's avatar
      powerpc: bpf: eliminate zero extension code-gen · a4c92773
      Jiong Wang authored 
      Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: default avatarJiong Wang <jiong.wang@netronome.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      a4c92773
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7