- 02 Oct, 2003 14 commits
-
-
Stephen Hemminger authored
-
Harald Welte authored
-
Harald Welte authored
-
Patrick McHardy authored
-
Patrick McHardy authored
-
Rusty Russell authored
Balazs Scheidler pointed out that we can fail to call ip_nat_setup_info for local NAT, which causes the connection to be added twice. Boom. Also move the hash table insertion into ip_nat_setup_info.
-
Jozsef Kadlecsik authored
This patch introduces the /proc/sys/net/ipv4/netfilter/ directory for=20 the tuneable parameters of the conntrack engine of netfilter. The parameters which can currently be fine-tuned (if required at all)=20 are the ip_conntrack_max, and the conntrack timeout parameters in seconds. The default timeout value for the TCP CLOSE_WAIT state is raised to 3 days, which should cause less problems with long-lived half-closed TCP sessions. For the sake of compatibility with 2.4,=20 /proc/sys/net/ipv4/netfilter/ip_conntrack_max is duplicated as=20 /proc/sys/net/ipv4/ip_conntrack_max as well.
-
Tiago Sousa authored
-
Harald Welte authored
the 25_natcore-nohelper.patch (incorporated in 2.4.22) did actually make things not better. If a NAT rule was matched, num_manips can still be 0. However, some helpers (like PPTP) need to _always mangle the packets, even if there is no NAT mapping for a particular connection. On the other hand, as soon as CONFIG_IP_NF_LOCAL_NAT was disabled, we did end up half-mangling local (non-NAT'ed) connections. This patch removes the LOCAL_OUT hook from the NAT core unless CONFIG_IP_NF_NAT_LOCAL is enabled.
-
Patrick McHardy authored
-
Harald Welte authored
-
Nick Piggin authored
This removes the remains of some debugging stuff which was never really enabled properly - it never reported memory leaks. Its not useful for anyone but me. A proper solution involves counting all requests in flight and all threads but we'll probably put that just into mm.
-
Alexander Viro authored
sget() is pessimistic and assumes it won't find a superblock - and as a result it always pre-allocates a new one before even searching for an existing entry. If it finds an existing one, it free's the extra one it just allocated. Especially with /proc usage it usually _does_ find an existing superblock, so this is all extra work. It should allocate a new one only if it couldn't find an old one (and re-search). The same way as iget() does it.
-
Nick Piggin authored
This one won't cause hangs, but can trip some WARNs.
-
- 01 Oct, 2003 26 commits
-
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/net-2.5
-
Arun Sharma authored
-
Alexander Viro authored
Rather than not kfree'ing the UDF data in the case of a bad inode (which still _may_ have had the UDF data already allocated to it), make sure to initialize the pointer to NULL properly when we're done with it.
-
Andrew Morton authored
From: Arun Sharma <arun.sharma@intel.com> Based on some earlier discussion: http://marc.theaimsgroup.com/?t=106015010700002&r=1&w=2 here's a new patch that attempts to disable BLK_DEV_FD on platforms which don't support it. The patch also attempts to remove the duplication of the logic in compat_ioctl.h.
-
Andrew Morton authored
-
Andrew Morton authored
From: James Morris <jmorris@redhat.com>
-
Andrew Morton authored
From: Arun Sharma <arun.sharma@intel.com> A minor bug fix to the ioctl32 code handling SG_IO. sgio->dxferp is not initialzed properly.
-
Andrew Morton authored
From: Geert Uytterhoeven <geert@linux-m68k.org> Make that allyesconfig works on architectures that don't support HugeTLBs.
-
Andrew Morton authored
From: Andries.Brouwer@cwi.nl `generic_NCR5380_biosparam' declared `static' but never defined
-
Andrew Morton authored
From: Rick Lindsley <ricklind@us.ibm.com> One typo corrected, and the references to 2.5 are minimized and mostly changed to 2.6.
-
Andrew Morton authored
From: Roland McGrath <roland@redhat.com> gdb really needs some way to know the AT_SYSINFO_EHDR value for a process being debugged or for the dead process described by a core file. Without this value, it can't find the information necessary to show backtraces of threads waiting in system calls. There are any number of ways this information could be made available. Here is one solution that provides more debugging information in a clean and general fashion. I've added access to the AT_* values passed to a process for third parties to examine for debugging purposes. The same data passed on the stack at startup is made available in /proc/PID/auxv and is written in an NT_AUXV note in core dumps. (Both of these are consistent with what Solaris does using the same names.) Here are two different patches that implement the same thing differently. The first patch uses a ref-counted data structure to copy the aux vector and shares among forked mm's until they exec and get a new one. The second patch avoids the complexity of that data structure by simply expanding the mm_struct with space to hold a copy of the data. Both patches work correctly; I have examined the new /proc/PID/auxv file and core dumps. I hope you will consider including one of these patches, or at least some way of getting at this information from the debugger. I am certainly open to other suggestions on implementing this feature, and to suggestions on alternative interfaces for getting the AT_SYSINFO_EHDR value cleanly.
-
Andrew Morton authored
- mpparse printk should be in hex (john stultz <johnstul@us.ibm.com>) - fiddle with RCU copyright messages (Dipankar Sarma <dipankar@in.ibm.com>) - use print_dev_t() for sysfs dev file in videodev.c (Gerd Knorr <kraxel@bytesex.org>) - comx-hw-munich.c 64-bit warning fix (Vinay K Nallamothu <vinay.nallamothu@gsecone.com>) - random.c return val fix
-
Andrew Morton authored
From: Will Dyson <will_dyson@pobox.com> Remember to free the inode cache if register_filesystem() fails.
-
Andrew Morton authored
From: Rolf Eike Beer <eike-kernel@sf-tec.de> this patch makes some ints to unsigned ints. They are only used as loop counters and compared to unsigned ints. GCC 3.3 doesn't like this. They will never be negative anyway, so we could easily shut him up.
-
Andrew Morton authored
From: Stephen Smalley <sds@epoch.ncsc.mil> This patch changes the security_inode_permission hook to also take a nameidata parameter in addition to the existing inode and mask parameters. A nameidata is already passed (although sometimes NULL) to fs/namei.c:permission(), and the patch changes exec_permission_lite() to also take a nameidata parameter so that it can pass it along to the security hook. The patch includes corresponding changes to the SELinux module to use the nameidata information when it is available; this allows SELinux to include pathname information in audit messages when a nameidata structure was supplied.
-
Andrew Morton authored
From: Stephen Smalley <sds@epoch.ncsc.mil> This patch fixes a bug introduced by earlier code cleanups in the SELinux convert_context code that manifests upon a policy reload that removes previously valid security attributes. Thanks to Magosanyi Arpad for reporting the bug.
-
Andrew Morton authored
From: Felipe W Damasio <felipewd@terra.com.br> If other kmallocs failed after successfully allocating a "struct mtd_info", it should be freed before returning NULL.
-
Andrew Morton authored
From: Christoph Hellwig <hch@lst.de> It's the only abuse of proc_iops left (except the totally b0rked comx driver). The patch is from Al, I just forward-ported it from 2.4. Background: struct proc_dir_entry has a struct inode_operations *proc_iops member, it's from Linux's stoneage and used internally by procfs to assign either the link or directory inode ops. Unfortunately some drivers started to abuse it do do bad things like create on lookup (that's the comx thingy which relies on unexported symbols and thus is broken for modular builds since mid-2.3) or various ->permission tricks (all gone by now). After this patch is gone I have another one that kills proc_iops and just uses a normal conditional inside procfs to assign the right one directly.
-
Andrew Morton authored
From: Rusty Russell <rusty@rustcorp.com.au> Found this while converting netfilter modules to use the new parameters. Also fixes an out-by-one error in maximum elements you can put in array. The current "intarray" module params were never tested, and um, suck. Only one person uses them, and it looks painful. Since noone uses them, replace them with tested versions.
-
Andrew Morton authored
From: "Randy.Dunlap" <rddunlap@osdl.org>, Will Dyson <will_dyson@pobox.com>, me Add generic filesystem options parser (infrastructure) and use it to parse mount options in several filesystems (adfs, affs, autofs, autofs4, ext2, ext3, fat, hfs, hpfs, isofs, jfs, procfs, udf, and ufs). It saves between 128 and 512 bytes per filesystem.
-
Andrew Morton authored
From: "David S. Miller" <davem@redhat.com> This attempts to take care of 2 of the MM todos I had on my backlog: 1) Zap the stupid flush_cache_all() thing with more meaningful interfaces. 2) Resolve the ptrace user page access issues, first stage. The "first stage" mentioned for #2 is simply creating the user page accesor interfaces. The next stage needs to be mucking with get_user_pages() so that we can control when the flush_dcache_page() occurs. Then we: 1) For every platform where flush_dcache_page() is a non-nop add a call to the beginning of copy_{from,to}_user_page(). 2) Make access_process_vm() set the "no dcache flush" bit in it's call to get_user_pages(). The idea also was that we'd consolidate the write etc. boolean args passed to get_user_pages() into flag bits too. But at least with the below, we can delete that reminder FIXME comment from kernel/ptrace.c, the platforms have the necessary tools and just need to make use of it :) As a bonus I noticed that VMALLOC_VMADDR() did absolutely nothing. After all of this I only have 1 real TODO left, and that's dealing with the SMP TLB/pte invalidation stuff, very low priority until someone starts doing more work with sparc32/SMP in 2.6.x :)
-
Andrew Morton authored
Remove duplicated #defines
-
Andrew Morton authored
From: Andries.Brouwer@cwi.nl ext2 used a 32-bit field for dev_t, with possibly undefined storage following; thus, no action was required to go to 32-bit dev_t, but going to 64-bit dev_t required some subtlety: 0 was written in the first word and the 64 bits in the following two. Al truncated my 64-bit stuff to 32 bits but did not understand why there was this split, and wrote 0 followed by a single word. We should at least zero the word following to have well-defined storage later.
-
Andrew Morton authored
From: Herbert Xu <herbert@gondor.apana.org.au> The last change to isdn_common.c removed a label that is used when ISDN_PPP is defined. This patch puts it back.
-
Andrew Morton authored
From: Oliver Xymoron <oxymoron@waste.org> I just noticed the ikconfig stuff made it into mainline via -mm. I also just noticed that it's based in part on a patch I posted almost 5 years ago: http://groups.google.com/groups?q=oliver+xymoron+config.gz&hl=en&lr=&ie=UTF-8&selm=fa.j8fsl5v.g08fjo%40ifi.uio.no&rnum=2 Sadly, after wandering aimlessly in the desert of unloved patches all those years, all attribution got lost. This adds a copyright + license to scripts/bin2c.c, which hasn't aged a day.
-
Andrew Morton authored
From: Herbert Xu <herbert@gondor.apana.org.au> Currently com20020 and com20020_cs both call request_region on the same block of ports leading to a conflict. This patch resolves this by moving request_region out of the generic driver and into the isa/pci/cs drivers.
-