Rearrange fs/afs/proc.c to get rid of all the remaining predeclarations.
Signed-off-by: David Howells <dhowells@redhat.com>

Rearrange fs/afs/proc.c to move the show routines up to the top of each
block so the order is show, iteration, ops, file ops, fops.
Signed-off-by: David Howells <dhowells@redhat.com>

Rearrange fs/afs/proc.c by moving fops and open functions down so as to
remove predeclarations.
Signed-off-by: David Howells <dhowells@redhat.com>

In fs/afs/proc.c, move functions that create and remove /proc files to the
end of the source file as a first stage in getting rid of all the forward
declarations.
Signed-off-by: David Howells <dhowells@redhat.com>

Fixes: 2cd1f0dd ("isdn: replace ->proc_fops with ->proc_show")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This makes Alexey happy and Al groan.  Based on a patch from
Alexey Dobriyan.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Just set up the show callback in the tty_operations, and use
proc_create_single_data to create the file without additional
boilerplace code.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Just set up the show callback in the tty_operations, and use
proc_create_single_data to create the file without additional
boilerplace code.
Signed-off-by: Christoph Hellwig <hch@lst.de>

The driver proc file hasn't been writeable for a long time, so this is
just dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>

And switch to proc_create_single_data.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And remove proc boilerplate code.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.

Also don't bother handling proc_create* failures - the driver works
perfectly fine without the proc files, and the cleanup will handle
missing files gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And use proc private data directly instead of doing a detour
through seq->private and private state.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And remove proc boilerplate code.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And use proc private data directly instead of doing a detour
through seq->private.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And use proc private data directly instead of doing a detour
through seq->private.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And use proc private data directly instead of doing a detour
through seq->private.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And use proc private data directly instead of doing a detour
through seq->private.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And stop trying to get a reference on the submodule, procfs code deals
with release after an unloaded module and thus removed proc entry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

And stop messing with try_module_get on THIS_MODULE, which doesn't make
any sense here.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And use the root resource directly from the proc private data.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Unwind the registration loop into individual calls.  Switch to use
proc_create_single where applicable.

Also don't bother handling proc_create* failures - the driver works
perfectly fine without the proc files, and the cleanup will handle
missing files gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.

Also don't bother handling proc_create* failures - the driver works
perfectly fine without the proc files, and the cleanup will handle
missing files gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_single.

Also don't bother handling proc_create* failures - the driver works
perfectly fine without the proc files, and the cleanup will handle
missing files gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Variant of proc_create_data that directly take a seq_file show
callback and deals with network namespaces in ->open and ->release.
All callers of proc_create + single_open_net converted over, and
single_{open,release}_net are removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Variants of proc_create{,_data} that directly take a struct seq_operations
and deal with network namespaces in ->open and ->release.  All callers of
proc_create + seq_open_net converted over, and seq_{open,release}_net are
removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>

This helper deals with single_{open,release}_net internals and thus
belongs here.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Just use the address family from the proc private data instead of copying
it into per-file data.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Remove a couple indirections to make the code look like most other
protocols.
Signed-off-by: Christoph Hellwig <hch@lst.de>

The code should be using the pid namespace from the procfs mount
instead of trying to look it up during open.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pass the hashtable to the proc private data instead of copying
it into the per-file private data.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Remove the pointless ping_seq_afinfo indirection and make the code look
like most other protocols.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Avoid most of the afinfo indirections and just call the proc helpers
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Remove a couple indirections to make the code look like most other
protocols.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>