- 02 Jul, 2018 3 commits
-
-
Hangbin Liu authored
After we change the ipvlan mode from l3 to l2, or vice versa, we only reset IFF_NOARP flag, but don't flush the ARP table cache, which will cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2(). Then the message will not come out of host. Here is the reproducer on local host: ip link set eth1 up ip addr add 192.168.1.1/24 dev eth1 ip link add link eth1 ipvlan1 type ipvlan mode l3 ip netns add net1 ip link set ipvlan1 netns net1 ip netns exec net1 ip link set ipvlan1 up ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1 ip route add 192.168.2.0/24 via 192.168.1.2 ping 192.168.2.2 -c 2 ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2 ping 192.168.2.2 -c 2 Add the same configuration on remote host. After we set the mode to l2, we could find that the src/dst MAC addresses are the same on eth1: 21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64 Fix this by calling dev_change_flags(), which will call netdevice notifier with flag change info. v2: a) As pointed out by Wang Cong, check return value for dev_change_flags() when change dev flags. b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops. So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path. Reported-by:Jianlin Shi <jishi@redhat.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Biggers authored
The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags, not 'gfp_t'. So don't pass GFP_KERNEL to it. Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Sabrina Dubroca authored
Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163 ("net: Add a skb_gro_flush_final helper.") Signed-off-by:
-
- 01 Jul, 2018 2 commits
-
-
Ilpo Järvinen authored
If SACK is not enabled and the first cumulative ACK after the RTO retransmission covers more than the retransmitted skb, a spurious FRTO undo will trigger (assuming FRTO is enabled for that RTO). The reason is that any non-retransmitted segment acknowledged will set FLAG_ORIG_SACK_ACKED in tcp_clean_rtx_queue even if there is no indication that it would have been delivered for real (the scoreboard is not kept with TCPCB_SACKED_ACKED bits in the non-SACK case so the check for that bit won't help like it does with SACK). Having FLAG_ORIG_SACK_ACKED set results in the spurious FRTO undo in tcp_process_loss. We need to use more strict condition for non-SACK case and check that none of the cumulatively ACKed segments were retransmitted to prove that progress is due to original transmissions. Only then keep FLAG_ORIG_SACK_ACKED set, allowing FRTO undo to proceed in non-SACK case. (FLAG_ORIG_SACK_ACKED is planned to be renamed to FLAG_ORIG_PROGRESS to better indicate its purpose but to keep this change minimal, it will be done in another patch). Besides burstiness and congestion control violations, this problem can result in RTO loop: When the loss recovery is prematurely undoed, only new data will be transmitted (if available) and the next retransmission can occur only after a new RTO which in case of multiple losses (that are not for consecutive packets) requires one RTO per loss to recover. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-01 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) A bpf_fib_lookup() helper fix to change the API before freeze to return an encoding of the FIB lookup result and return the nexthop device index in the params struct (instead of device index as return code that we had before), from David. 2) Various BPF JIT fixes to address syzkaller fallout, that is, do not reject progs when set_memory_*() fails since it could still be RO. Also arm32 JIT was not using bpf_jit_binary_lock_ro() API which was an issue, and a memory leak in s390 JIT found during review, from Daniel. 3) Multiple fixes for sockmap/hash to address most of the syzkaller triggered bugs. Usage with IPv6 was crashing, a GPF in bpf_tcp_close(), a missing sock_map_release() routine to hook up to callbacks, and a fix for an omitted bucket lock in sock_close(), from John. 4) Two bpftool fixes to remove duplicated error message on program load, and another one to close the libbpf object after program load. One additional fix for nfp driver's BPF offload to avoid stopping offload completely if replace of program failed, from Jakub. 5) Couple of BPF selftest fixes that bail out in some of the test scripts if the user does not have the right privileges, from Jeffrin. 6) Fixes in test_bpf for s390 when CONFIG_BPF_JIT_ALWAYS_ON is set where we need to set the flag that some of the test cases are expected to fail, from Kleber. 7) Fix to detangle BPF_LIRC_MODE2 dependency from CONFIG_CGROUP_BPF since it has no relation to it and lirc2 users often have configs without cgroups enabled and thus would not be able to use it, from Sean. 8) Fix a selftest failure in sockmap by removing a useless setrlimit() call that would set a too low limit where at the same time we are already including bpf_rlimit.h that does the job, from Yonghong. 9) Fix BPF selftest config with missing missing NET_SCHED, from Anders. ==================== Signed-off-by:
-
- 30 Jun, 2018 27 commits
-
-
Daniel Borkmann authored
John Fastabend says: ==================== This addresses two syzbot issues that lead to identifying (by Eric and Wei) a class of bugs where we don't correctly check for IPv4/v6 sockets and their associated state. The second issue was a locking omission in sockhash. The first patch addresses IPv6 socks and fixing an error where sockhash would overwrite the prot pointer with IPv4 prot. To fix this build similar solution to TLS ULP. Although we continue to allow socks in all states not just ESTABLISH in this patch set because as Martin points out there should be no issue with this on the sockmap ULP because we don't use the ctx in this code. Once multiple ULPs coexist we may need to revisit this. However we can do this in *next trees. The other issue syzbot found that the tcp_close() handler missed locking the hash bucket lock which could result in corrupting the sockhash bucket list if delete and close ran at the same time. And also the smap_list_remove() routine was not working correctly at all. This was not caught in my testing because in general my tests (to date at least lets add some more robust selftest in bpf-next) do things in the "expected" order, create map, add socks, delete socks, then tear down maps. The tests we have that do the ops out of this order where only working on single maps not multi- maps so we never saw the issue. Thanks syzbot. The fix is to restructure the tcp_close() lock handling. And fix the obvious bug in smap_list_remove(). Finally, during review I noticed the release handler was omitted from the upstream code (patch 4) due to an incorrect merge conflict fix when I ported the code to latest bpf-next before submitting. This would leave references to the map around if the user never closes the map. v3: rework patches, dropping ESTABLISH check and adding rcu annotation along with the smap_list_remove fix v4: missed one more case where maps was being accessed without the sk_callback_lock, spoted by Martin as well. v5: changed to use a specific lock for maps and reduced callback lock so that it is only used to gaurd sk callbacks. I think this makes the logic a bit cleaner and avoids confusion ovoer what each lock is doing. Also big thanks to Martin for thorough review he caught at least one case where I missed a rcu_call(). ==================== Signed-off-by:Daniel Borkmann <daniel@iogearbox.net>
-
John Fastabend authored
Add map_release_uref pointer to hashmap ops. This was dropped when original sockhash code was ported into bpf-next before initial commit. Fixes: 81110384 ("bpf: sockmap, add hash map support") Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
John Fastabend authored
First the sk_callback_lock() was being used to protect both the sock callback hooks and the psock->maps list. This got overly convoluted after the addition of sockhash (in sockmap it made some sense because masp and callbacks were tightly coupled) so lets split out a specific lock for maps and only use the callback lock for its intended purpose. This fixes a couple cases where we missed using maps lock when it was in fact needed. Also this makes it easier to follow the code because now we can put the locking closer to the actual code its serializing. Next, in sock_hash_delete_elem() the pattern was as follows, sock_hash_delete_elem() [...] spin_lock(bucket_lock) l = lookup_elem_raw() if (l) hlist_del_rcu() write_lock(sk_callback_lock) .... destroy psock ... write_unlock(sk_callback_lock) spin_unlock(bucket_lock) The ordering is necessary because we only know the {p}sock after dereferencing the hash table which we can't do unless we have the bucket lock held. Once we have the bucket lock and the psock element it is deleted from the hashmap to ensure any other path doing a lookup will fail. Finally, the refcnt is decremented and if zero the psock is destroyed. In parallel with the above (or free'ing the map) a tcp close event may trigger tcp_close(). Which at the moment omits the bucket lock altogether (oops!) where the flow looks like this, bpf_tcp_close() [...] write_lock(sk_callback_lock) for each psock->maps // list of maps this sock is part of hlist_del_rcu(ref_hash_node); .... destroy psock ... write_unlock(sk_callback_lock) Obviously, and demonstrated by syzbot, this is broken because we can have multiple threads deleting entries via hlist_del_rcu(). To fix this we might be tempted to wrap the hlist operation in a bucket lock but that would create a lock inversion problem. In summary to follow locking rules the psocks maps list needs the sk_callback_lock (after this patch maps_lock) but we need the bucket lock to do the hlist_del_rcu. To resolve the lock inversion problem pop the head of the maps list repeatedly and remove the reference until no more are left. If a delete happens in parallel from the BPF API that is OK as well because it will do a similar action, lookup the lock in the map/hash, delete it from the map/hash, and dec the refcnt. We check for this case before doing a destroy on the psock to ensure we don't have two threads tearing down a psock. The new logic is as follows, bpf_tcp_close() e = psock_map_pop(psock->maps) // done with map lock bucket_lock() // lock hash list bucket l = lookup_elem_raw(head, hash, key, key_size); if (l) { //only get here if elmnt was not already removed hlist_del_rcu() ... destroy psock... } bucket_unlock() And finally for all the above to work add missing locking around map operations per above. Then add RCU annotations and use rcu_dereference/rcu_assign_pointer to manage values relying on RCU so that the object is not free'd from sock_hash_free() while it is being referenced in bpf_tcp_close(). Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com Fixes: 81110384 ("bpf: sockmap, add hash map support") Signed-off-by: -
John Fastabend authored
If a hashmap is free'd with open socks it removes the reference to the hash entry from the psock. If that is the last reference to the psock then it will also be free'd by the reference counting logic. However the current logic that removes the hash reference from the list of references is broken. In smap_list_remove() we first check if the sockmap entry matches and then check if the hashmap entry matches. But, the sockmap entry sill always match because its NULL in this case which causes the first entry to be removed from the list. If this is always the "right" entry (because the user adds/removes entries in order) then everything is OK but otherwise a subsequent bpf_tcp_close() may reference a free'd object. To fix this create two list handlers one for sockmap and one for sockhash. Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com Fixes: 81110384 ("bpf: sockmap, add hash map support") Acked-by:
-
John Fastabend authored
This fixes a crash where we assign tcp_prot to IPv6 sockets instead of tcpv6_prot. Previously we overwrote the sk->prot field with tcp_prot even in the AF_INET6 case. This patch ensures the correct tcp_prot and tcpv6_prot are used. Tested with 'netserver -6' and 'netperf -H [IPv6]' as well as 'netperf -H [IPv4]'. The ESTABLISHED check resolves the previously crashing case here. Fixes: 174a79ff ("bpf: sockmap with sk redirect support") Reported-by: syzbot+5c063698bdbfac19f363@syzkaller.appspotmail.com Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Roopa Prabhu authored
After commit f9d4b0c1 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule"), rule_exists got replaced by rule_find for existing rule lookup in both the add and del paths. While this is good for the delete path, it solves a few problems but opens up a few invalid key matches in the add path. $ip -4 rule add table main tos 10 fwmark 1 $ip -4 rule add table main tos 10 RTNETLINK answers: File exists The problem here is rule_find does not check if the key masks in the new and old rule are the same and hence ends up matching a more secific rule. Rule key masks cannot be easily compared today without an elaborate if-else block. Its best to introduce key masks for easier and accurate rule comparison in the future. Until then, due to fear of regressions this patch re-introduces older loose rule_exists during add. Also fixes both rule_exists and rule_find to cover missing attributes. Fixes: f9d4b0c1 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Stephen Hemminger authored
When doing device hotplug the sub channel must be async to avoid deadlock issues because device is discovered in softirq context. When doing changes to MTU and number of channels, the setup must be synchronous to avoid races such as when MTU and device settings are done in a single ip command. Reported-by:
Thomas Walker <Thomas.Walker@twosigma.com> Fixes: 8195b139 ("hv_netvsc: fix deadlock on hotplug") Fixes: 732e4985 ("netvsc: fix race on sub channel creation") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Cong Wang authored
As noticed by Eric, we need to switch to the helper dev_change_tx_queue_len() for SIOCSIFTXQLEN call path too, otheriwse still miss dev_qdisc_change_tx_queue_len(). Fixes: 6a643ddb ("net: introduce helper dev_change_tx_queue_len()") Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
Gustavo A. R. Silva authored
pool can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/zatm.c:1491 zatm_ioctl() warn: potential spectre issue 'zatm_dev->pool_info' (local cap) Fix this by sanitizing pool before using it to index zatm_dev->pool_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-06-29 please apply a few qeth fixes for -net and your 4.17 stable queue. Patches 1-3 fix several issues wrt to MAC address management that were introduced during the 4.17 cycle. Patch 4 tackles a long-standing issue with busy multi-connection workloads on devices in af_iucv mode. Patch 5 makes sure to re-enable all active HW offloads, after a card was previously set offline and thus lost its HW context. ==================== Signed-off-by: -
Julian Wiedmann authored
commit e830baa9 ("qeth: restore device features after recovery") and commit ce344356 ("s390/qeth: rely on kernel for feature recovery") made sure that the HW functions for device features get re-programmed after recovery. But we missed that the same handling is also required when a card is first set offline (destroying all HW context), and then online again. Fix this by moving the re-enable action out of the recovery-only path. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
If qeth_qdio_output_handler() detects that a transmit requires async completion, it replaces the pending buffer's metadata object (qeth_qdio_out_buffer) so that this queue buffer can be re-used while the data is pending completion. Later when the CQ indicates async completion of such a metadata object, qeth_qdio_cq_handler() tries to free any data associated with this object (since HW has now completed the transfer). By calling qeth_clear_output_buffer(), it erronously operates on the queue buffer that _previously_ belonged to this transfer ... but which has been potentially re-used several times by now. This results in double-free's of the buffer's data, and failing transmits as the buffer descriptor is scrubbed in mid-air. The correct way of handling this situation is to 1. scrub the queue buffer when it is prepared for re-use, and 2. later obtain the data addresses from the async-completion notifier (ie. the AOB), instead of the queue buffer. All this only affects qeth devices used for af_iucv HiperTransport. Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by:
-
Vasily Gorbik authored
*ether_addr*_64bits functions have been introduced to optimize performance critical paths, which access 6-byte ethernet address as u64 value to get "nice" assembly. A harmless hack works nicely on ethernet addresses shoved into a structure or a larger buffer, until busted by Kasan on smth like plain (u8 *)[6]. qeth_l2_set_mac_address calls qeth_l2_remove_mac passing u8 old_addr[ETH_ALEN] as an argument. Adding/removing macs for an ethernet adapter is not that performance critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not faster than is_multicast_ether_addr: is_multicast_ether_addr(%r2) -> %r2 llc %r2,0(%r2) risbg %r2,%r2,63,191,0 is_multicast_ether_addr_64bits(%r2) -> %r2 llgc %r2,0(%r2) risbg %r2,%r2,63,191,0 So, let's just use is_multicast_ether_addr instead of is_multicast_ether_addr_64bits. Fixes: bcacfcbc ("s390/qeth: fix MAC address update sequence") Reviewed-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
When qeth_l2_set_mac_address() finds the card in a non-reachable state, it merely copies the new MAC address into dev->dev_addr so that __qeth_l2_set_online() can later register it with the HW. But __qeth_l2_set_online() may very well be running concurrently, so we can't trust the card state without appropriate locking: If the online sequence is past the point where it registers dev->dev_addr (but not yet in SOFTSETUP state), any address change needs to be properly programmed into the HW. Otherwise the netdevice ends up with a different MAC address than what's set in the HW, and inbound traffic is not forwarded as expected. This is most likely to occur for OSD in LPAR, where commit 21b1702a ("s390/qeth: improve fallback to random MAC address") now triggers eg. systemd to immediately change the MAC when the netdevice is registered with a NET_ADDR_RANDOM address. Fixes: bcacfcbc ("s390/qeth: fix MAC address update sequence") Signed-off-by:
-
Julian Wiedmann authored
This reverts commit b7493e91. On its own, querying RDEV for a MAC address works fine. But when upgrading from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with commit ec61bd2f), the RDEV query now returns a _different_ MAC address than the DDEV query. If the NIC is configured with MACPROTECT, z/VM apparently requires us to use the MAC that was initially returned (on DDEV) and registered. So after upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the new MAC address fails and we end up with a non-operabel interface. To avoid regressions on upgrade, switch back to using DDEV for the MAC address query. The downgrade path (first RDEV, later DDEV) is fine, in this case both queries return the same MAC address. Fixes: b7493e91 ("s390/qeth: use Read device to query hypervisor for MAC") Reported-by:
Michal Kubecek <mkubecek@suse.com> Tested-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Sabrina Dubroca authored
The __alx_open function can be called from ndo_open, which is called under RTNL, or from alx_resume, which isn't. Since commit d768319c, we're calling the netif_set_real_num_{tx,rx}_queues functions, which need to be called under RTNL. This is similar to commit 0c2cc02e ("igb: Move the calls to set the Tx and Rx queues into igb_open"). Fixes: d768319c ("alx: enable multiple tx queues") Signed-off-by:
-
Bert Kenward authored
Fixes: fc7a6c28 ("sfc: use a semaphore to lock farch filters too") Suggested-by:
Joseph Korty <joe.korty@concurrent-rt.com> Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
Dan Murphy authored
Fix a bug where INT_STAT1 was written twice and INT_STAT2 was ignored when disabling interrupts. Fixes: b753a9fa ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
David Ahern authored
Sowmini reported that a recent commit broke prefix routes for linklocal addresses. The newly added modify_prefix_route is attempting to add a new prefix route when the ifp priority does not match the route metric however the check needs to account for the default priority. In addition, the route add fails because the route already exists, and then the delete removes the one that exists. Flip the order to do the delete first. Fixes: 8308f3ff ("net/ipv6: Add support for specifying metric of connected routes") Reported-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Michal Hocko authored
alloc_skb_with_frags uses __GFP_NORETRY for non-sleeping allocations which is just a noop and a little bit confusing. __GFP_NORETRY was added by ed98df33 ("net: use __GFP_NORETRY for high order allocations") to prevent from the OOM killer. Yet this was not enough because fb05e7a8 ("net: don't wait for order-3 page allocation") didn't want an excessive reclaim for non-costly orders so it made it completely NOWAIT while it preserved __GFP_NORETRY in place which is now redundant. Drop the pointless __GFP_NORETRY because this function is used as copy&paste source for other places. Reviewed-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== DPAA fixes A couple of fixes for the DPAA drivers, addressing an issue with short UDP or TCP frames (with padding) that were marked as having a wrong checksum and dropped by the FMan hardware and a problem with the buffer used for the scatter-gather table being too small as per the hardware requirements. ==================== Signed-off-by: -
Madalin Bucur authored
The DPAA HW requires that at least 256 bytes from the start of the first scatter-gather table entry are allocated and accessible. The hardware reads the maximum size the table can have in one access, thus requiring that the allocation and mapping to be done for the maximum size of 256B even if there is a smaller number of entries in the table. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Madalin Bucur authored
The FMan hardware parser needs to be configured to remove the short frame padding from the checksum calculation, otherwise short UDP and TCP frames are likely to be marked as having a bad checksum. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Driver performs the internal reload when it receives tx-timeout event from the OS. Internal reload might fail in some scenarios e.g., fatal HW issues. In such cases OS still see the link, which would result in undesirable functionalities such as re-generation of tx-timeouts. The patch addresses this issue by indicating the link-down to OS when tx-timeout is detected, and keeping the link in down state till the internal reload is successful. Please consider applying it to 'net' branch. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
-
Dan Carpenter authored
Static checkers complain that id_tbl->table points to longs and 4 bytes is smaller than sizeof(long). But the since other side is dividing by 32 instead of sizeof(long), that means the current code works fine. Anyway, it's more conventional to use the BITS_TO_LONGS() macro when we're allocating a bitmap. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The code assumes that there is 4 bytes in a pointer and it doesn't allocate enough memory. Signed-off-by:
-
Yuchung Cheng authored
Fast Open key could be stored in different endian based on the CPU. Previously hosts in different endianness in a server farm using the same key config (sysctl value) would produce different cookies. This patch fixes it by always storing it as little endian to keep same API for LE hosts. Reported-by:
Daniele Iamartino <danielei@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
- 29 Jun, 2018 8 commits
-
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== This set contains three fixes that are mostly JIT and set_memory_*() related. The third in the series in particular fixes the syzkaller bugs that were still pending; aside from local reproduction & testing, also 'syz test' wasn't able to trigger them anymore. I've tested this series on x86_64, arm64 and s390x, and kbuild bot wasn't yelling either for the rest. For details, please see patches as usual, thanks! ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Partially undo commit 9facc336 ("bpf: reject any prog that failed read-only lock") since it caused a regression, that is, syzkaller was able to manage to cause a panic via fault injection deep in set_memory_ro() path by letting an allocation fail: In x86's __change_page_attr_set_clr() it was able to change the attributes of the primary mapping but not in the alias mapping via cpa_process_alias(), so the second, inner call to the __change_page_attr() via __change_page_attr_set_clr() had to split a larger page and failed in the alloc_pages() with the artifically triggered allocation error which is then propagated down to the call site. Thus, for set_memory_ro() this means that it returned with an error, but from debugging a probe_kernel_write() revealed EFAULT on that memory since the primary mapping succeeded to get changed. Therefore the subsequent hdr->locked = 0 reset triggered the panic as it was performed on read-only memory, so call-site assumptions were infact wrong to assume that it would either succeed /or/ not succeed at all since there's no such rollback in set_memory_*() calls from partial change of mappings, in other words, we're left in a state that is "half done". A later undo via set_memory_rw() is succeeding though due to matching permissions on that part (aka due to the try_preserve_large_page() succeeding). While reproducing locally with explicitly triggering this error, the initial splitting only happens on rare occasions and in real world it would additionally need oom conditions, but that said, it could partially fail. Therefore, it is definitely wrong to bail out on set_memory_ro() error and reject the program with the set_memory_*() semantics we have today. Shouldn't have gone the extra mile since no other user in tree today infact checks for any set_memory_*() errors, e.g. neither module_enable_ro() / module_disable_ro() for module RO/NX handling which is mostly default these days nor kprobes core with alloc_insn_page() / free_insn_page() as examples that could be invoked long after bootup and original 314beb9b ("x86: bpf_jit_comp: secure bpf jit against spraying attacks") did neither when it got first introduced to BPF so "improving" with bailing out was clearly not right when set_memory_*() cannot handle it today. Kees suggested that if set_memory_*() can fail, we should annotate it with __must_check, and all callers need to deal with it gracefully given those set_memory_*() markings aren't "advisory", but they're expected to actually do what they say. This might be an option worth to move forward in future but would at the same time require that set_memory_*() calls from supporting archs are guaranteed to be "atomic" in that they provide rollback if part of the range fails, once that happened, the transition from RW -> RO could be made more robust that way, while subsequent RO -> RW transition /must/ continue guaranteeing to always succeed the undo part. Reported-by: syzbot+a4eb8c7766952a1ca872@syzkaller.appspotmail.com Reported-by: syzbot+d866d1925855328eac3b@syzkaller.appspotmail.com Fixes: 9facc336 ("bpf: reject any prog that failed read-only lock") Cc: Laura Abbott <labbott@redhat.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Daniel Borkmann authored
If we would ever fail in the bpf_jit_prog() pass that writes the actual insns to the image after we got header via bpf_jit_binary_alloc() then we also need to make sure to free it through bpf_jit_binary_free() again when bailing out. Given we had prior bpf_jit_prog() passes to initially probe for clobbered registers, program size and to fill in addrs arrray for jump targets, this is more of a theoretical one, but at least make sure this doesn't break with future changes. Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by:
-
Daniel Borkmann authored
Any eBPF JIT that where its underlying arch supports ARCH_HAS_SET_MEMORY would need to use bpf_jit_binary_{un,}lock_ro() pair instead of the set_memory_{ro,rw}() pair directly as otherwise changes to the former might break. arm32's eBPF conversion missed to change it, so fix this up here. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by: -
David S. Miller authored
Merge tag 'mac80211-for-davem-2018-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just three fixes: * fix HT operation in mesh mode * disable preemption in control frame TX * check nla_parse_nested() return values where missing (two places) ==================== Signed-off-by:
-
Shakeel Butt authored
Currently the kernel accounts the memory for network traffic through mem_cgroup_[un]charge_skmem() interface. However the memory accounted only includes the truesize of sk_buff which does not include the size of sock objects. In our production environment, with opt-out kmem accounting, the sock kmem caches (TCP[v6], UDP[v6], RAW[v6], UNIX) are among the top most charged kmem caches and consume a significant amount of memory which can not be left as system overhead. So, this patch converts the kmem caches of all sock objects to SLAB_ACCOUNT. Signed-off-by:
Shakeel Butt <shakeelb@google.com> Suggested-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by:
-
Johannes Berg authored
At the very least we should check the return value if nla_parse_nested() is called with a non-NULL policy. Signed-off-by:Johannes Berg <johannes.berg@intel.com>
-
Bob Copeland authored
Commit 9757235f, "nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") relaxed the range for the HT operation field in meshconf, while also adding checks requiring the non-greenfield and non-ht-sta bits to be set in certain circumstances. The latter bit is actually reserved for mesh BSSes according to Table 9-168 in 802.11-2016, so in fact it should not be set. wpa_supplicant sets these bits because the mesh and AP code share the same implementation, but authsae does not. As a result, some meshconf updates from authsae which set only the NONHT_MIXED protection bits were being rejected. In order to avoid breaking userspace by changing the rules again, simply accept the values with or without the bits set, and mask off the reserved bit to match the spec. While in here, update the 802.11-2012 reference to 802.11-2016. Fixes: 9757235f ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Cc: Masashi Honma <masashi.honma@gmail.com> Signed-off-by:
Bob Copeland <bobcopeland@fb.com> Reviewed-by:
Masashi Honma <masashi.honma@gmail.com> Reviewed-by:
-
