- 18 Oct, 2020 27 commits
-
-
Christoph Hellwig authored
Replace the last call to alloc_vm_area with an open coded version using an iterator in struct gnttab_vm_area instead of the triple indirection magic in alloc_vm_area. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Link: https://lkml.kernel.org/r/20201002122204.1534411-11-hch@lst.deSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
Replacing alloc_vm_area with get_vm_area_caller + apply_page_range allows to fill put the phys_addr values directly instead of doing another loop over all addresses. Signed-off-by:
-
Christoph Hellwig authored
i915_gem_object_map implements fairly low-level vmap functionality in a driver. Split it into two helpers, one for remapping kernel memory which can use vmap, and one for I/O memory that uses vmap_pfn. The only practical difference is that alloc_vm_area prefeaults the vmalloc area PTEs, which doesn't seem to be required here for the kernel memory case (and could be added to vmap using a flag if actually required). Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Link: https://lkml.kernel.org/r/20201002122204.1534411-9-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
kmap for !PageHighmem is just a convoluted way to say page_address, and kunmap is a no-op in that case. Signed-off-by:
-
Christoph Hellwig authored
shmem_pin_map somewhat awkwardly reimplements vmap using alloc_vm_area and manual pte setup. The only practical difference is that alloc_vm_area prefeaults the vmalloc area PTEs, which doesn't seem to be required here (and could be added to vmap using a flag if actually required). Switch to use vmap, and use vfree to free both the vmalloc mapping and the page array, as well as dropping the references to each page. Signed-off-by:
-
Christoph Hellwig authored
Just manually pre-fault the PTEs using apply_to_page_range. Co-developed-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
Besides calling the callback on each page, apply_to_page_range also has the effect of pre-faulting all PTEs for the range. To support callers that only need the pre-faulting, make the callback optional. Based on a patch from Minchan Kim <minchan@kernel.org>. Signed-off-by:
-
Christoph Hellwig authored
Add a proper helper to remap PFNs into kernel virtual space so that drivers don't have to abuse alloc_vm_area and open coded PTE manipulation for it. Signed-off-by:
-
Christoph Hellwig authored
Add a flag so that vmap takes ownership of the passed in page array. When vfree is called on such an allocation it will put one reference on each page, and free the page array itself. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Patch series "remove alloc_vm_area", v4. This series removes alloc_vm_area, which was left over from the big vmalloc interface rework. It is a rather arkane interface, basicaly the equivalent of get_vm_area + actually faulting in all PTEs in the allocated area. It was originally addeds for Xen (which isn't modular to start with), and then grew users in zsmalloc and i915 which seems to mostly qualify as abuses of the interface, especially for i915 as a random driver should not set up PTE bits directly. This patch (of 11): * Document that you can call vfree() on an address returned from vmap() * Remove the note about the minimum size -- the minimum size of a vmalloc allocation is one page * Add a Context: section * Fix capitalisation * Reword the prohibition on calling from NMI context to avoid a double negative Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Minchan Kim authored
There is usecase that System Management Software(SMS) want to give a memory hint like MADV_[COLD|PAGEEOUT] to other processes and in the case of Android, it is the ActivityManagerService. The information required to make the reclaim decision is not known to the app. Instead, it is known to the centralized userspace daemon(ActivityManagerService), and that daemon must be able to initiate reclaim on its own without any app involvement. To solve the issue, this patch introduces a new syscall process_madvise(2). It uses pidfd of an external process to give the hint. It also supports vector address range because Android app has thousands of vmas due to zygote so it's totally waste of CPU and power if we should call the syscall one by one for each vma.(With testing 2000-vma syscall vs 1-vector syscall, it showed 15% performance improvement. I think it would be bigger in real practice because the testing ran very cache friendly environment). Another potential use case for the vector range is to amortize the cost ofTLB shootdowns for multiple ranges when using MADV_DONTNEED; this could benefit users like TCP receive zerocopy and malloc implementations. In future, we could find more usecases for other advises so let's make it happens as API since we introduce a new syscall at this moment. With that, existing madvise(2) user could replace it with process_madvise(2) with their own pid if they want to have batch address ranges support feature. ince it could affect other process's address range, only privileged process(PTRACE_MODE_ATTACH_FSCREDS) or something else(e.g., being the same UID) gives it the right to ptrace the process could use it successfully. The flag argument is reserved for future use if we need to extend the API. I think supporting all hints madvise has/will supported/support to process_madvise is rather risky. Because we are not sure all hints make sense from external process and implementation for the hint may rely on the caller being in the current context so it could be error-prone. Thus, I just limited hints as MADV_[COLD|PAGEOUT] in this patch. If someone want to add other hints, we could hear the usecase and review it for each hint. It's safer for maintenance rather than introducing a buggy syscall but hard to fix it later. So finally, the API is as follows, ssize_t process_madvise(int pidfd, const struct iovec *iovec, unsigned long vlen, int advice, unsigned int flags); DESCRIPTION The process_madvise() system call is used to give advice or directions to the kernel about the address ranges from external process as well as local process. It provides the advice to address ranges of process described by iovec and vlen. The goal of such advice is to improve system or application performance. The pidfd selects the process referred to by the PID file descriptor specified in pidfd. (See pidofd_open(2) for further information) The pointer iovec points to an array of iovec structures, defined in <sys/uio.h> as: struct iovec { void *iov_base; /* starting address */ size_t iov_len; /* number of bytes to be advised */ }; The iovec describes address ranges beginning at address(iov_base) and with size length of bytes(iov_len). The vlen represents the number of elements in iovec. The advice is indicated in the advice argument, which is one of the following at this moment if the target process specified by pidfd is external. MADV_COLD MADV_PAGEOUT Permission to provide a hint to external process is governed by a ptrace access mode PTRACE_MODE_ATTACH_FSCREDS check; see ptrace(2). The process_madvise supports every advice madvise(2) has if target process is in same thread group with calling process so user could use process_madvise(2) to extend existing madvise(2) to support vector address ranges. RETURN VALUE On success, process_madvise() returns the number of bytes advised. This return value may be less than the total number of requested bytes, if an error occurred. The caller should check return value to determine whether a partial advice occurred. FAQ: Q.1 - Why does any external entity have better knowledge? Quote from Sandeep "For Android, every application (including the special SystemServer) are forked from Zygote. The reason of course is to share as many libraries and classes between the two as possible to benefit from the preloading during boot. After applications start, (almost) all of the APIs end up calling into this SystemServer process over IPC (binder) and back to the application. In a fully running system, the SystemServer monitors every single process periodically to calculate their PSS / RSS and also decides which process is "important" to the user for interactivity. So, because of how these processes start _and_ the fact that the SystemServer is looping to monitor each process, it does tend to *know* which address range of the application is not used / useful. Besides, we can never rely on applications to clean things up themselves. We've had the "hey app1, the system is low on memory, please trim your memory usage down" notifications for a long time[1]. They rely on applications honoring the broadcasts and very few do. So, if we want to avoid the inevitable killing of the application and restarting it, some way to be able to tell the OS about unimportant memory in these applications will be useful. - ssp Q.2 - How to guarantee the race(i.e., object validation) between when giving a hint from an external process and get the hint from the target process? process_madvise operates on the target process's address space as it exists at the instant that process_madvise is called. If the space target process can run between the time the process_madvise process inspects the target process address space and the time that process_madvise is actually called, process_madvise may operate on memory regions that the calling process does not expect. It's the responsibility of the process calling process_madvise to close this race condition. For example, the calling process can suspend the target process with ptrace, SIGSTOP, or the freezer cgroup so that it doesn't have an opportunity to change its own address space before process_madvise is called. Another option is to operate on memory regions that the caller knows a priori will be unchanged in the target process. Yet another option is to accept the race for certain process_madvise calls after reasoning that mistargeting will do no harm. The suggested API itself does not provide synchronization. It also apply other APIs like move_pages, process_vm_write. The race isn't really a problem though. Why is it so wrong to require that callers do their own synchronization in some manner? Nobody objects to write(2) merely because it's possible for two processes to open the same file and clobber each other's writes --- instead, we tell people to use flock or something. Think about mmap. It never guarantees newly allocated address space is still valid when the user tries to access it because other threads could unmap the memory right before. That's where we need synchronization by using other API or design from userside. It shouldn't be part of API itself. If someone needs more fine-grained synchronization rather than process level, there were two ideas suggested - cookie[2] and anon-fd[3]. Both are applicable via using last reserved argument of the API but I don't think it's necessary right now since we have already ways to prevent the race so don't want to add additional complexity with more fine-grained optimization model. To make the API extend, it reserved an unsigned long as last argument so we could support it in future if someone really needs it. Q.3 - Why doesn't ptrace work? Injecting an madvise in the target process using ptrace would not work for us because such injected madvise would have to be executed by the target process, which means that process would have to be runnable and that creates the risk of the abovementioned race and hinting a wrong VMA. Furthermore, we want to act the hint in caller's context, not the callee's, because the callee is usually limited in cpuset/cgroups or even freezed state so they can't act by themselves quick enough, which causes more thrashing/kill. It doesn't work if the target process are ptraced(e.g., strace, debugger, minidump) because a process can have at most one ptracer. [1] https://developer.android.com/topic/performance/memory" [2] process_getinfo for getting the cookie which is updated whenever vma of process address layout are changed - Daniel Colascione - https://lore.kernel.org/lkml/20190520035254.57579-1-minchan@kernel.org/T/#m7694416fd179b2066a2c62b5b139b14e3894e224 [3] anonymous fd which is used for the object(i.e., address range) validation - Michal Hocko - https://lore.kernel.org/lkml/20200120112722.GY18451@dhcp22.suse.cz/ [minchan@kernel.org: fix process_madvise build break for arm64] Link: http://lkml.kernel.org/r/20200303145756.GA219683@google.com [minchan@kernel.org: fix build error for mips of process_madvise] Link: http://lkml.kernel.org/r/20200508052517.GA197378@google.com [akpm@linux-foundation.org: fix patch ordering issue] [akpm@linux-foundation.org: fix arm64 whoops] [minchan@kernel.org: make process_madvise() vlen arg have type size_t, per Florian] [akpm@linux-foundation.org: fix i386 build] [sfr@canb.auug.org.au: fix syscall numbering] Link: https://lkml.kernel.org/r/20200905142639.49fc3f1a@canb.auug.org.au [sfr@canb.auug.org.au: madvise.c needs compat.h] Link: https://lkml.kernel.org/r/20200908204547.285646b4@canb.auug.org.au [minchan@kernel.org: fix mips build] Link: https://lkml.kernel.org/r/20200909173655.GC2435453@google.com [yuehaibing@huawei.com: remove duplicate header which is included twice] Link: https://lkml.kernel.org/r/20200915121550.30584-1-yuehaibing@huawei.com [minchan@kernel.org: do not use helper functions for process_madvise] Link: https://lkml.kernel.org/r/20200921175539.GB387368@google.com [akpm@linux-foundation.org: pidfd_get_pid() gained an argument] [sfr@canb.auug.org.au: fix up for "iov_iter: transparently handle compat iovecs in import_iovec"] Link: https://lkml.kernel.org/r/20200928212542.468e1fef@canb.auug.org.auSigned-off-by:YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Suren Baghdasaryan <surenb@google.com> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
David Rientjes <rientjes@google.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <christian@brauner.io> Cc: Daniel Colascione <dancol@google.com> Cc: Jann Horn <jannh@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Dias <joaodias@google.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Sandeep Patil <sspatil@google.com> Cc: SeongJae Park <sj38.park@gmail.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: <linux-man@vger.kernel.org> Link: http://lkml.kernel.org/r/20200302193630.68771-3-minchan@kernel.org Link: http://lkml.kernel.org/r/20200508183320.GA125527@google.com Link: http://lkml.kernel.org/r/20200622192900.22757-4-minchan@kernel.org Link: https://lkml.kernel.org/r/20200901000633.1920247-4-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
process_madvise syscall needs pidfd_get_pid function to translate pidfd to pid so this patch move the function to kernel/pid.c. Suggested-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Acked-by:
-
Minchan Kim authored
Patch series "introduce memory hinting API for external process", v9. Now, we have MADV_PAGEOUT and MADV_COLD as madvise hinting API. With that, application could give hints to kernel what memory range are preferred to be reclaimed. However, in some platform(e.g., Android), the information required to make the hinting decision is not known to the app. Instead, it is known to a centralized userspace daemon(e.g., ActivityManagerService), and that daemon must be able to initiate reclaim on its own without any app involvement. To solve the concern, this patch introduces new syscall - process_madvise(2). Bascially, it's same with madvise(2) syscall but it has some differences. 1. It needs pidfd of target process to provide the hint 2. It supports only MADV_{COLD|PAGEOUT|MERGEABLE|UNMEREABLE} at this moment. Other hints in madvise will be opened when there are explicit requests from community to prevent unexpected bugs we couldn't support. 3. Only privileged processes can do something for other process's address space. For more detail of the new API, please see "mm: introduce external memory hinting API" description in this patchset. This patch (of 3): In upcoming patches, do_madvise will be called from external process context so we shouldn't asssume "current" is always hinted process's task_struct. Furthermore, we must not access mm_struct via task->mm, but obtain it via access_mm() once (in the following patch) and only use that pointer [1], so pass it to do_madvise() as well. Note the vma->vm_mm pointers are safe, so we can use them further down the call stack. And let's pass current->mm as arguments of do_madvise so it shouldn't change existing behavior but prepare next patch to make review easy. [vbabka@suse.cz: changelog tweak] [minchan@kernel.org: use current->mm for io_uring] Link: http://lkml.kernel.org/r/20200423145215.72666-1-minchan@kernel.org [akpm@linux-foundation.org: fix it for upstream changes] [akpm@linux-foundation.org: whoops] [rdunlap@infradead.org: add missing includes] Signed-off-by: -
John Hubbard authored
This patch reduces the running time for hmm-tests from about 10+ seconds, to just under 1.0 second, for an approximately 10x speedup. That brings it in line with most of the other tests in selftests/vm, which mostly run in < 1 sec. This is done with a one-line change that simply reduces the number of iterations of several tests, from 256, to 10. Thanks to Ralph Campbell for suggesting changing NTIMES as a way to get the speedup. Suggested-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
Jann Horn authored
create_elf_tables() runs after setup_new_exec(), so other tasks can already access our new mm and do things like process_madvise() on it. (At the time I'm writing this commit, process_madvise() is not in mainline yet, but has been in akpm's tree for some time.) While I believe that there are currently no APIs that would actually allow another process to mess up our VMA tree (process_madvise() is limited to MADV_COLD and MADV_PAGEOUT, and uring and userfaultfd cannot reach an mm under which no syscalls have been executed yet), this seems like an accident waiting to happen. Let's make sure that we always take the mmap lock around GUP paths as long as another process might be able to see the mm. (Yes, this diff looks suspicious because we drop the lock before doing anything with `vma`, but that's because we actually don't do anything with it apart from the NULL check.) Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Michel Lespinasse <walken@google.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lkml.kernel.org/r/CAG48ez1-PBCdv3y8pn-Ty-b+FmBSLwDuVKFSt8h7wARLy0dF-Q@mail.gmail.comSigned-off-by:
-
Jann Horn authored
To be safe against concurrent changes to the VMA tree, we must take the mmap lock around GUP operations (excluding the GUP-fast family of operations, which will take the mmap lock by themselves if necessary). This code is only for testing, and it's only reachable by root through debugfs, so this doesn't really have any impact; however, if we want to add lockdep asserts into the GUP path, we need to have clean locking here. Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Reviewed-by:
-
Liam R. Howlett authored
There are two locations that have a block of code for munmapping a vma range. Change those two locations to use a function and add meaningful comments about what happens to the arguments, which was unclear in the previous code. Signed-off-by:
Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by:
-
Liam R. Howlett authored
There are three places that the next vma is required which uses the same block of code. Replace the block with a function and add comments on what happens in the case where NULL is encountered. Signed-off-by:
-
Miaohe Lin authored
There is no need to check if this process has the right to modify the specified process when they are same. And we could also skip the security hook call if a process is modifying its own pages. Add helper function to handle these. Suggested-by:
Hongxiang Lou <louhongxiang@huawei.com> Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Joonsoo Kim authored
To calculate the correct node to migrate the page for hotplug, we need to check node id of the page. Wrapper for alloc_migration_target() exists for this purpose. However, Vlastimil informs that all migration source pages come from a single node. In this case, we don't need to check the node id for each page and we don't need to re-set the target nodemask for each page by using the wrapper. Set up the migration_target_control once and use it for all pages. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/1594622517-20681-10-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by:
-
Joonsoo Kim authored
There is a well-defined standard migration target callback. Use it directly. Signed-off-by:
-
Roman Gushchin authored
If a memcg to charge can be determined (using remote charging API), there are no reasons to exclude allocations made from an interrupt context from the accounting. Such allocations will pass even if the resulting memcg size will exceed the hard limit, but it will affect the application of the memory pressure and an inability to put the workload under the limit will eventually trigger the OOM. To use active_memcg() helper, memcg_kmem_bypass() is moved back to memcontrol.c. Signed-off-by:
Roman Gushchin <guro@fb.com> Signed-off-by:
Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Link: http://lkml.kernel.org/r/20200827225843.1270629-5-guro@fb.comSigned-off-by:
-
Roman Gushchin authored
Remote memcg charging API uses current->active_memcg to store the currently active memory cgroup, which overwrites the memory cgroup of the current process. It works well for normal contexts, but doesn't work for interrupt contexts: indeed, if an interrupt occurs during the execution of a section with an active memcg set, all allocations inside the interrupt will be charged to the active memcg set (given that we'll enable accounting for allocations from an interrupt context). But because the interrupt might have no relation to the active memcg set outside, it's obviously wrong from the accounting prospective. To resolve this problem, let's add a global percpu int_active_memcg variable, which will be used to store an active memory cgroup which will be used from interrupt contexts. set_active_memcg() will transparently use current->active_memcg or int_active_memcg depending on the context. To make the read part simple and transparent for the caller, let's introduce two new functions: - struct mem_cgroup *active_memcg(void), - struct mem_cgroup *get_active_memcg(void). They are returning the active memcg if it's set, hiding all implementation details: where to get it depending on the current context. Signed-off-by:
-
Roman Gushchin authored
There are checks for current->mm and current->active_memcg in get_obj_cgroup_from_current(), but these checks are redundant: memcg_kmem_bypass() called just above performs same checks. Signed-off-by:
-
Roman Gushchin authored
Patch series "mm: kmem: kernel memory accounting in an interrupt context". This patchset implements memcg-based memory accounting of allocations made from an interrupt context. Historically, such allocations were passed unaccounted mostly because charging the memory cgroup of the current process wasn't an option. Also performance reasons were likely a reason too. The remote charging API allows to temporarily overwrite the currently active memory cgroup, so that all memory allocations are accounted towards some specified memory cgroup instead of the memory cgroup of the current process. This patchset extends the remote charging API so that it can be used from an interrupt context. Then it removes the fence that prevented the accounting of allocations made from an interrupt context. It also contains a couple of optimizations/code refactorings. This patchset doesn't directly enable accounting for any specific allocations, but prepares the code base for it. The bpf memory accounting will likely be the first user of it: a typical example is a bpf program parsing an incoming network packet, which allocates an entry in hashmap map to store some information. This patch (of 4): Currently memcg_kmem_bypass() is called before obtaining the current memory/obj cgroup using get_mem/obj_cgroup_from_current(). Moving memcg_kmem_bypass() into get_mem/obj_cgroup_from_current() reduces the number of call sites and allows further code simplifications. Signed-off-by:
-
Roman Gushchin authored
Currently the remote memcg charging API consists of two functions: memalloc_use_memcg() and memalloc_unuse_memcg(), which set and clear the memcg value, which overwrites the memcg of the current task. memalloc_use_memcg(target_memcg); <...> memalloc_unuse_memcg(); It works perfectly for allocations performed from a normal context, however an attempt to call it from an interrupt context or just nest two remote charging blocks will lead to an incorrect accounting. On exit from the inner block the active memcg will be cleared instead of being restored. memalloc_use_memcg(target_memcg); memalloc_use_memcg(target_memcg_2); <...> memalloc_unuse_memcg(); Error: allocation here are charged to the memcg of the current process instead of target_memcg. memalloc_unuse_memcg(); This patch extends the remote charging API by switching to a single function: struct mem_cgroup *set_active_memcg(struct mem_cgroup *memcg), which sets the new value and returns the old one. So a remote charging block will look like: old_memcg = set_active_memcg(target_memcg); <...> set_active_memcg(old_memcg); This patch is heavily based on the patch by Johannes Weiner, which can be found here: https://lkml.org/lkml/2020/5/28/806 . Signed-off-by: -
Krzysztof Kozlowski authored
Fix linkage error when CONFIG_BINFMT_ELF is selected but CONFIG_COREDUMP is not: ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_phdrs': elfcore.c:(.text+0x172): undefined reference to `dump_emit' ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_data': elfcore.c:(.text+0x2b2): undefined reference to `dump_emit' Fixes: 1fcccbac ("elf coredump: replace ELF_CORE_EXTRA_* macros by functions") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
- 17 Oct, 2020 5 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.10-2020-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools updates from Arnaldo Carvalho de Melo: - cgroup improvements for 'perf stat', allowing for compact specification of events and cgroups in the command line. - Support per thread topdown metrics in 'perf stat'. - Support sample-read topdown metric group in 'perf record' - Show start of latency in addition to its start in 'perf sched latency'. - Add min, max to 'perf script' futex-contention output, in addition to avg. - Allow usage of 'perf_event_attr->exclusive' attribute via the new ':e' event modifier. - Add 'snapshot' command to 'perf record --control', using it with Intel PT. - Support FIFO file names as alternative options to 'perf record --control'. - Introduce branch history "streams", to compare 'perf record' runs with 'perf diff' based on branch records and report hot streams. - Support PE executable symbol tables using libbfd, to profile, for instance, wine binaries. - Add filter support for option 'perf ftrace -F/--funcs'. - Allow configuring the 'disassembler_style' 'perf annotate' knob via 'perf config' - Update CascadelakeX and SkylakeX JSON vendor events files. - Add support for parsing perchip/percore JSON vendor events. - Add power9 hv_24x7 core level metric events. - Add L2 prefetch, ITLB instruction fetch hits JSON events for AMD zen1. - Enable Family 19h users by matching Zen2 AMD vendor events. - Use debuginfod in 'perf probe' when required debug files not found locally. - Display negative tid in non-sample events in 'perf script'. - Make GTK2 support opt-in - Add build test with GTK+ - Add missing -lzstd to the fast path feature detection - Add scripts to auto generate 'mmap', 'mremap' string<->id tables for use in 'perf trace'. - Show python test script in verbose mode. - Fix uncore metric expressions - Msan uninitialized use fixes. - Use condition variables in 'perf bench numa' - Autodetect python3 binary in systems without python2. - Support md5 build ids in addition to sha1. - Add build id 'perf test' regression test. - Fix printable strings in python3 scripts. - Fix off by ones in 'perf trace' in arches using libaudit. - Fix JSON event code for events referencing std arch events. - Introduce 'perf test' shell script for Arm CoreSight testing. - Add rdtsc() for Arm64 for used in the PERF_RECORD_TIME_CONV metadata event and in 'perf test tsc'. - 'perf c2c' improvements: Add "RMT Load Hit" metric, "Total Stores", fixes and documentation update. - Fix usage of reloc_sym in 'perf probe' when using both kallsyms and debuginfo files. - Do not print 'Metric Groups:' unnecessarily in 'perf list' - Refcounting fixes in the event parsing code. - Add expand cgroup event 'perf test' entry. - Fix out of bounds CPU map access when handling armv8_pmu events in 'perf stat'. - Add build-id injection 'perf bench' benchmark. - Enter namespace when reading build-id in 'perf inject'. - Do not load map/dso when injecting build-id speeding up the 'perf inject' process. - Add --buildid-all option to avoid processing all samples, just the mmap metadata events. - Add feature test to check if libbfd has buildid support - Add 'perf test' entry for PE binary format support. - Fix typos in power8 PMU vendor events JSON files. - Hide libtraceevent non API functions. * tag 'perf-tools-for-v5.10-2020-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (113 commits) perf c2c: Update documentation for metrics reorganization perf c2c: Add metrics "RMT Load Hit" perf c2c: Correct LLC load hit metrics perf c2c: Change header for LLC local hit perf c2c: Use more explicit headers for HITM perf c2c: Change header from "LLC Load Hitm" to "Load Hitm" perf c2c: Organize metrics based on memory hierarchy perf c2c: Display "Total Stores" as a standalone metrics perf c2c: Display the total numbers continuously perf bench: Use condition variables in numa. perf jevents: Fix event code for events referencing std arch events perf diff: Support hot streams comparison perf streams: Report hot streams perf streams: Calculate the sum of total streams hits perf streams: Link stream pair perf streams: Compare two streams perf streams: Get the evsel_streams by evsel_idx perf streams: Introduce branch history "streams" perf intel-pt: Improve PT documentation slightly perf tools: Add support for exclusive groups/events ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma updates from Jason Gunthorpe: "A usual cycle for RDMA with a typical mix of driver and core subsystem updates: - Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma, hns, usnic, qib, qedr, cxgb4, hns, bnxt_re - Various rtrs fixes and updates - Bug fix for mlx4 CM emulation for virtualization scenarios where MRA wasn't working right - Use tracepoints instead of pr_debug in the CM code - Scrub the locking in ucma and cma to close more syzkaller bugs - Use tasklet_setup in the subsystem - Revert the idea that 'destroy' operations are not allowed to fail at the driver level. This proved unworkable from a HW perspective. - Revise how the umem API works so drivers make fewer mistakes using it - XRC support for qedr - Convert uverbs objects RWQ and MW to new the allocation scheme - Large queue entry sizes for hns - Use hmm_range_fault() for mlx5 On Demand Paging - uverbs APIs to inspect the GID table instead of sysfs - Move some of the RDMA code for building large page SGLs into lib/scatterlist" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits) RDMA/ucma: Fix use after free in destroy id flow RDMA/rxe: Handle skb_clone() failure in rxe_recv.c RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI RDMA: Explicitly pass in the dma_device to ib_register_device lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values IB/mlx4: Convert rej_tmout radix-tree to XArray RDMA/rxe: Fix bug rejecting all multicast packets RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt() RDMA/rxe: Remove duplicate entries in struct rxe_mr IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS IB/rdmavt: Fix sizeof mismatch MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl. RDMA/bnxt_re: Use rdma_umem_for_each_dma_block() RDMA/umem: Move to allocate SG table from pages lib/scatterlist: Add support in dynamic allocation of SG table from pages tools/testing/scatterlist: Show errors in human readable form tools/testing/scatterlist: Rejuvenate bit-rotten test RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces RDMA/uverbs: Expose the new GID query API to user space ... -
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxLinus Torvalds authored
Pull i3c updates from Boris Brezillon: - Fix DAA for the pre-reserved address case - Fix an error path in the cadence driver * tag 'i3c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: Fix error return in cdns_i3c_master_probe() i3c: master: fix for SETDASA and DAA process i3c: master add i3c_master_attach_boardinfo to preserve boardinfo
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD updates from Richard Weinberger: "NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC HyperBus changes: - DMA support for TI's AM654 HyperBus controller driver. - HyperBus frontend driver for Renesas RPC-IF driver. SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi Add Alder Lake-S PCI ID MTD Core changes: - mtdoops: Don't run panic write twice - mtdconcat: Correctly handle panic write - Use DEFINE_SHOW_ATTRIBUTE" * tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits) mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled mtd: hyperbus: add Renesas RPC-IF driver Revert "mtd: spi-nor: Prefer asynchronous probe" mtd: parsers: bcm63xx: Do not make it modular mtd: spear_smi: Enable compile testing mtd: maps: vmu-flash: fix typos for struct memcard mtd: physmap: Add Baikal-T1 physically mapped ROM support mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu mtd: onenand: simplify the return expression of onenand_transfer_auto_oob mtd: rawnand: cadence: remove a redundant dev_err call mtd: rawnand: ams-delta: Fix non-OF build warning mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops() mtd: rawnand: Introduce nand_set_ecc_on_host_ops() mtd: rawnand: atmel: Check return values for nand_read_data_op mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size() mtd: rawnand: qcom: Simplify with dev_err_probe() mtd: rawnand: marvell: Fix and update kerneldoc mtd: rawnand: marvell: Simplify with dev_err_probe() mtd: rawnand: gpmi: Simplify with dev_err_probe() mtd: rawnand: atmel: Simplify with dev_err_probe() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linuxLinus Torvalds authored
Pull thermal updates from Daniel Lezcano: - Fix Kconfig typo "acces" -> "access" (Colin Ian King) - Use dev_error_probe() to simplify the error handling on imx and imx8 platforms (Anson Huang) - Use dedicated kobj_to_dev() instead of container_of() in the sysfs core code (Tian Tao) - Fix coding style by adding braces to a one line conditional statement on rcar (Geert Uytterhoeven) - Add DT binding documentation for the r8a774e1 platform and update the Kconfig description supporting RZ/G2 SoCs (Lad Prabhakar) - Simplify the return expression of stm_thermal_prepare on the stm32 platform (Qinglang Miao) - Fix the unit in the function documentation for the idle injection cooling device (Zhuguang Qing) - Remove an unecessary mutex_init() in the core code (Qinglang Miao) - Add support for keep alive events in the core code and the specific int340x (Srinivas Pandruvada) - Remove unused thermal zone variable in devfreq and cpufreq cooling devices (Zhuguang Qing) - Add the A100's THS controller support (Yangtao Li) - Add power management on the omap3's bandgap sensor (Adam Ford) - Fix a missing nlmsg_free in the netlink core error path (Jing Xiangfeng) * tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp() thermal: ti-soc-thermal: Enable addition power management thermal: sun8i: Add A100's THS controller support thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate dt-bindings: thermal: sun8i: Add binding for A100's THS controller thermal: cooling: Remove unused variable *tz thermal: int340x: Add keep alive response method thermal: core: Add new event for sending keep alive notifications thermal: int340x: Provide notification for OEM variable change thermal: core: remove unnecessary mutex_init() thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns thermal: Kconfig: Update description for RCAR_GEN3_THERMAL config thermal: stm32: simplify the return expression of stm_thermal_prepare() dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support thermal: rcar_thermal: Add missing braces to conditional statement thermal: Use kobj_to_dev() instead of container_of() thermal: imx8mm: Use dev_err_probe() to simplify error handling thermal: imx: Use dev_err_probe() to simplify error handling drivers: thermal: Kconfig: fix spelling mistake "acces" -> "access"
-
- 16 Oct, 2020 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs updates from Miklos Szeredi: - Improve performance for certain container setups by introducing a "volatile" mode - ioctl improvements - continue preparation for unprivileged overlay mounts * tag 'ovl-update-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: use generic vfs_ioc_setflags_prepare() helper ovl: support [S|G]ETFLAGS and FS[S|G]ETXATTR ioctls for directories ovl: rearrange ovl_can_list() ovl: enumerate private xattrs ovl: pass ovl_fs down to functions accessing private xattrs ovl: drop flags argument from ovl_do_setxattr() ovl: adhere to the vfs_ vs. ovl_do_ conventions for xattrs ovl: use ovl_do_getxattr() for private xattr ovl: fold ovl_getxattr() into ovl_get_redirect_xattr() ovl: clean up ovl_getxattr() in copy_up.c duplicate ovl_getxattr() ovl: provide a mount option "volatile" ovl: check for incompatible features in work dir
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull afs updates from David Howells: "A collection of fixes to fix afs_cell struct refcounting, thereby fixing a slew of related syzbot bugs: - Fix the cell tree in the netns to use an rwsem rather than RCU. There seem to be some problems deriving from the use of RCU and a seqlock to walk the rbtree, but it's not entirely clear what since there are several different failures being seen. Changing things to use an rwsem instead makes it more robust. The extra performance derived from using RCU isn't necessary in this case since the only time we're looking up a cell is during mount or when cells are being manually added. - Fix the refcounting by splitting the usage counter into a memory refcount and an active users counter. The usage counter was doing double duty, keeping track of whether a cell is still in use and keeping track of when it needs to be destroyed - but this makes the clean up tricky. Separating these out simplifies the logic. - Fix purging a cell that has an alias. A cell alias pins the cell it's an alias of, but the alias is always later in the list. Trying to purge in a single pass causes rmmod to hang in such a case. - Fix cell removal. If a cell's manager is requeued whilst it's removing itself, the manager will run again and re-remove itself, causing problems in various places. Follow Hillf Danton's suggestion to insert a more terminal state that causes the manager to do nothing post-removal. In additional to the above, two other changes: - Add a tracepoint for the cell refcount and active users count. This helped with debugging the above and may be useful again in future. - Downgrade an assertion to a print when a still-active server is seen during purging. This was happening as a consequence of incomplete cell removal before the servers were cleaned up" * tag 'afs-fixes-20201016' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Don't assert on unpurgeable server records afs: Add tracing for cell refcount and active user count afs: Fix cell removal afs: Fix cell purging with aliases afs: Fix cell refcounting by splitting the usage counter afs: Fix rapid cell addition/removal by not using RCU on cells tree -
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this round, we've added new features such as zone capacity for ZNS and a new GC policy, ATGC, along with in-memory segment management. In addition, we could improve the decompression speed significantly by changing virtual mapping method. Even though we've fixed lots of small bugs in compression support, I feel that it becomes more stable so that I could give it a try in production. Enhancements: - suport zone capacity in NVMe Zoned Namespace devices - introduce in-memory current segment management - add standart casefolding support - support age threshold based garbage collection - improve decompression speed by changing virtual mapping method Bug fixes: - fix condition checks in some ioctl() such as compression, move_range, etc - fix 32/64bits support in data structures - fix memory allocation in zstd decompress - add some boundary checks to avoid kernel panic on corrupted image - fix disallowing compression for non-empty file - fix slab leakage of compressed block writes In addition, it includes code refactoring for better readability and minor bug fixes for compression and zoned device support" * tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits) f2fs: code cleanup by removing unnecessary check f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info f2fs: fix writecount false positive in releasing compress blocks f2fs: introduce check_swap_activate_fast() f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier case f2fs: handle errors of f2fs_get_meta_page_nofail f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode f2fs: reject CASEFOLD inode flag without casefold feature f2fs: fix memory alignment to support 32bit f2fs: fix slab leak of rpages pointer f2fs: compress: fix to disallow enabling compress on non-empty file f2fs: compress: introduce cic/dic slab cache f2fs: compress: introduce page array slab cache f2fs: fix to do sanity check on segment/section count f2fs: fix to check segment boundary during SIT page readahead f2fs: fix uninit-value in f2fs_lookup f2fs: remove unneeded parameter in find_in_block() f2fs: fix wrong total_sections check and fsmeta check f2fs: remove duplicated code in sanity_check_area_boundary f2fs: remove unused check on version_bitmap ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull documentation updates from Mauro Carvalho Chehab: "A series of patches addressing warnings produced by make htmldocs. This includes: - kernel-doc markup fixes - ReST fixes - Updates at the build system in order to support newer versions of the docs build toolchain (Sphinx) After this series, the number of html build warnings should reduce significantly, and building with Sphinx 3.1 or later should now be supported (although it is still recommended to use Sphinx 2.4.4). As agreed with Jon, I should be sending you a late pull request by the end of the merge window addressing remaining issues with docs build, as there are a number of warning fixes that depends on pull requests that should be happening along the merge window. The end goal is to have a clean htmldocs build on Kernel 5.10. PS. It should be noticed that Sphinx 3.0 is not currently supported, as it lacks support for C domain namespaces. Such feature, needed in order to document uAPI system calls with Sphinx 3.x, was added only on Sphinx 3.1" * tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits) PM / devfreq: remove a duplicated kernel-doc markup mm/doc: fix a literal block markup workqueue: fix a kernel-doc warning docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup Input: sparse-keymap: add a description for @sw rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu nl80211: docs: add a description for s1g_cap parameter usb: docs: document altmode register/unregister functions kunit: test.h: fix a bad kernel-doc markup drivers: core: fix kernel-doc markup for dev_err_probe() docs: bio: fix a kerneldoc markup kunit: test.h: solve kernel-doc warnings block: bio: fix a warning at the kernel-doc markups docs: powerpc: syscall64-abi.rst: fix a malformed table drivers: net: hamradio: fix document location net: appletalk: Kconfig: Fix docs location dt-bindings: fix references to files converted to yaml memblock: get rid of a :c:type leftover math64.h: kernel-docs: Convert some markups into normal comments media: uAPI: buffer.rst: remove a left-over documentation ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "Fix mismatch section of adding early trace events. Fixes the issue of a mismatch section that was missed due to gcc inlining the offending function, while clang did not (and reported the issue)" * tag 'trace-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove __init from __trace_early_add_new_event()
-
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk fix from Petr Mladek: "Prevent overflow in the new lockless ringbuffer" * tag 'printk-for-5.10-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: ringbuffer: Wrong data pointer when appending small string
-
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linuxLinus Torvalds authored
Pull kgdb updates from Daniel Thompson: "A fairly modest set of changes for this cycle. Of particular note are an earlycon fix from Doug Anderson and my own changes to get kgdb/kdb to honour the kprobe blocklist. The later creates a safety rail that strongly encourages developers not to place breakpoints in, for example, arch specific trap handling code. Also included are a couple of small fixes and tweaks: an API update, eliminate a coverity dead code warning, improved handling of search during multi-line printk and a couple of typo corrections" * tag 'kgdb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Fix pager search for multi-line strings kernel: debug: Centralize dbg_[de]activate_sw_breakpoints kgdb: Add NOKPROBE labels on the trap handler functions kgdb: Honour the kprobe blocklist when setting breakpoints kernel/debug: Fix spelling mistake in debug_core.c kdb: Use newer api for tasklist scanning kgdb: Make "kgdbcon" work properly with "kgdb_earlycon" kdb: remove unnecessary null check of dbg_io_ops
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS updates from Thomas Bogendoerfer: - removed support for PNX833x alias NXT_STB22x - included Ingenic SoC support into generic MIPS kernels - added support for new Ingenic SoCs - converted workaround selection to use Kconfig - replaced old boot mem functions by memblock_* - enabled COP2 usage in kernel for Loongson64 to make use of 16byte load/stores possible - cleanups and fixes * tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits) MIPS: DEC: Restore bootmem reservation for firmware working memory area MIPS: dec: fix section mismatch bcm963xx_tag.h: fix duplicated word mips: ralink: enable zboot support MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit MIPS: cpu-probe: introduce exclusive R3k CPU probe MIPS: cpu-probe: move fpu probing/handling into its own file MIPS: replace add_memory_region with memblock MIPS: Loongson64: Clean up numa.c MIPS: Loongson64: Select SMP in Kconfig to avoid build error mips: octeon: Add Ubiquiti E200 and E220 boards MIPS: SGI-IP28: disable use of ll/sc in kernel MIPS: tx49xx: move tx4939_add_memory_regions into only user MIPS: pgtable: Remove used PAGE_USERIO define MIPS: alchemy: Share prom_init implementation MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled MIPS: process: include exec.h header in process.c MIPS: process: Add prototype for function arch_dup_task_struct MIPS: idle: Add prototype for function check_wait ...
-
