- Zarlink MT312 satellite channel decoder driver contributed by Andreas
   Oberritter

 - grundig_29504-401.c: fix charge pump and band switch setting bug,
   caught by Robert Schlabbach <robert_s@gmx.net>
 - grundig_29504-401.c: pass apply_frontend_param() return value to
   upper layers
 - grundig_29504-401.c: try to make a more specific detection mechanism
 - grundig_29504-491.c:remove bogus out-of-range check, FEC table index
   is limited to 0...7 due to &= ~0x03 anyway...
 - nxt6000.c: Patch by Paul Andreassen: Add Support for Comtech
   DVBT-6k07 (PLL IC: SP5730)
 - ves1820.c: use Robert Schlabbach's suggestions for CLKCONF (0x03) and
   CARCONF (0x04)
 - alps_bsrv2.c: don't enable voltage on init + inversion bugfix

 - code review and fix the old race condition in dev->set_multicast_list
 - use tq_schedule instead of tq_immediate
 - remove card_num and dev_num from struct dvb_net (now obsolete)
 - prevent interface from being removed while it is in use
 - allow add/remove only for the superuser
 - set check-CRC flag on section filter to drop broken packets
 - some more debug printfs in filter handling code
 - cleaned up and commented packet reception handler
 - fix formatting

 - indentation fixes in dvb_demux.c
 - include cleanup in various files
 - simplify dvb/ttpci/Makefile

 - fix WRITE_RPS0 and WRITE_RPS1 inlines, fix usage in mxb and budget
   drivers
 - export "saa7146_start_preview" and "saa7146_stop_preview" to allow
   drivers to start and stop video overlay (necessary for analog module
   support in the av7110 driver)
 - fix i2c implementation: some frontend drivers transfer a huge amount
   of firmware data (> 30kB), speed up the transmission by busy waiting
   between byte transfers for bigger transmissions
 - change ioctl function in various driver to accept a saa7146
   filehandle instead of a saa714 device structure

The CDROM_SEND_PACKET ioctl passes a struct cdrom_generic_command from
user space, which contains a timeout field.

The timeout is measured in jiffies, but the conversion from user to
kernel jiffies is missing, which makes the timeout 10 times shorter than
it should be in 2.5 kernels on x86.  This causes CDRW formatting with
cdrwtool to fail.  The following patch fixes this problem.

The kernel build leaves a temp file in linux/usr/ that make clean
doesn't remove.  Fixed in the patch below.

some rather minimal overflow protection. 

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

All of the cleanup functions in sound/oss/emu10k1/main.c were incorrectly
marked as __devinit. This little one fixes it, so that the module no longer
oopses when being removed.

into home.osdl.org:/home/torvalds/v2.5/linux

From Alexander Atanasov <alex@ssi.bg>

Fix DMA I/O and state machine fixes, error recovery

Since the IO-APIC irq disable fix went in we can now enable
the proper IRQ disabling in the IDE driver again. That had
been disabled due to the problems with UP IO-APIC.

into home.osdl.org:/home/torvalds/v2.5/linux

on 2.5+, since ppc64 can (and does) use the PCI domain numbers
for this instead.

The PCI domain support should be back-ported to 2.4.x rather
than having bigger PCI bus numbers.

Cset exclude: jgarzik@pobox.com|ChangeSet|20030714162217|61624

into nuts.ninka.net:/home/davem/src/BK/sparc-2.5

Issue discovered by Ricky Beam (jfbeam@bluetronic.net).

This fixes a build problem on sparc, and hopefully will prevent this from
happening in the future...

into kroah.com:/home/greg/linux/BK/pci-2.5