- 07 Jun, 2013 1 commit
-
-
Jaegeuk Kim authored
It is possible that iput is skipped after iget during the recovery. In recover_dentry(), dir = f2fs_iget(); ... if (de && inode->i_ino == le32_to_cpu(de->ino)) goto out; In this case, this dir is not able to be added in dirty_dir_inode_list. The actual linking is done only when set_page_dirty() is called. So let's add this newly got inode into the list explicitly, and put it at the end of the recovery routine. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 06 Jun, 2013 1 commit
-
-
Namjae Jeon authored
Fix the function get_victim_by_default, where it checks for the condition that p.min_segno != NULL_SEGNO as shown: if (p.min_segno != NULL_SEGNO) goto got_it; and if above condition is true then got_it: if (p.min_segno != NULL_SEGNO) { So this condition is being checked twice. Hence move the goto statement after the if condition so that duplication of condition check is avoided. Also this function makes a call to get_max_cost() to compute the max cost based on the f2fs_sbi_info and victim policy. Since get_max_cost depends on on three parameters of victim_sel_policy => alloc_mode, gc_mode & ofs_unit, once this victim policy is initialised, these value will not change till the execution time of get_victim_by_default() & also f2fs_sbi_info structure parameters will not change. Hence making calls to get_max_cost() in while loop does not seems to be a good point. Instead we can call it once in begining and store the results in local variable, which later can serve our purpose for comparing the cost with max cost inside the while loop. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 03 Jun, 2013 1 commit
-
-
Jason Hrycay authored
Add check for error pointers returned from get_node_page in order to avoid dereferencing a bad address on the next use. Signed-off-by: Jason Hrycay <jason.hrycay@motorola.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 28 May, 2013 34 commits
-
-
Jaegeuk Kim authored
If a file is linked with other files, it should be checkpointed at every fsync calls. For this, we use set_cp_file() with FADVISE_CP_BIT, but previously we didn't cover the flag by the global lock. This patch fixes that the inode page stores this correctly. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
- iget/iput flow in the dentry recovery process 1. *dir* = f2fs_iget 2. set FI_DELAY_IPUT to *dir* 3. add *dir* to the dirty_dir_list - __f2fs_add_link - recover_dentry) 4. iput *dir* by remove_dirty_dir_inode - sync_dirty_dir_inodes - write_chekcpoint If *dir*'s i_count is not 1 (i.e., root dir), remove_dirty_dir_inode is called later and then iput is triggered again due to the FI_DELAY_IPUT flag. So, let's unset the flag properly once iput is triggered. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
If there remains some unwritten blocks from the recovery, we should not call iput on that directory inode. Otherwise, we can loose some dentry blocks after the recovery. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Namjae Jeon authored
when there is an error from kthread_run, then return proper error rather than returning -ENOMEM. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Namjae Jeon authored
There are various functions with common code which could be separated out to make common routines. So, made new routines and in order to retain the same call path and no major changes, written some macros to access those routines. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Namjae Jeon authored
There is no need to initialize few pointers in f2fs_parent_dir as the values are not checked and instead directly initialized values are used. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Namjae Jeon authored
Some, counters are needed only for the statistical information while debugging. So, those can be controlled using CONFIG_F2FS_STAT_FS, pushing the usage for few variables under this flag. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
The on-disk block address is defined as __le32, but in-memory block address, block_t, does as u64. Let's synchronize them to 32 bits. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Dan Carpenter authored
There is an error path where "dir" is an ERR_PTR. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
Use the following helper function committed by Al. commit 7de9c6ee Author: Al Viro <viro@zeniv.linux.org.uk> Date: Sat Oct 23 11:11:40 2010 -0400 new helper: ihold() ... Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
If -ENOSPC is met during f2fs_link, we should not make the inode as bad. The inode is still alive. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch fixes the following deadlock bug during the recovery. INFO: task mount:1322 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount D ffffffff81125870 0 1322 1266 0x00000000 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520 Call Trace: [<ffffffff81125870>] ? __lock_page+0x70/0x70 [<ffffffff816a92d9>] schedule+0x29/0x70 [<ffffffff816a93af>] io_schedule+0x8f/0xd0 [<ffffffff8112587e>] sleep_on_page+0xe/0x20 [<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81125867>] __lock_page+0x67/0x70 [<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40 [<ffffffff81126857>] find_lock_page+0x67/0x80 [<ffffffff8112698f>] find_or_create_page+0x3f/0xb0 [<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs] [<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs] [<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs] [<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40 [<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs] [<ffffffff81184cf9>] mount_bdev+0x1c9/0x210 [<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs] [<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff81185a13>] mount_fs+0x43/0x1b0 [<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20 [<ffffffff811a0796>] vfs_kern_mount+0x76/0x120 [<ffffffff811a2cb7>] do_mount+0x237/0xa10 [<ffffffff81140b9b>] ? strndup_user+0x5b/0x80 [<ffffffff811a3520>] SyS_mount+0x90/0xe0 [<ffffffff816b3502>] system_call_fastpath+0x16/0x1b The bug is triggered when check_index_in_prev_nodes tries to get the direct node page by calling get_node_page. At this point, if the direct node page is already locked by get_dnode_of_data, its caller, we got a deadlock condition. This patch adds additional condition check for the reuse of locked direct node pages prior to the get_node_page call. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
While an orphan inode has zero link_count, f2fs_gc is able to select the inode for foreground gc. - f2fs_gc - do_garbage_collect - gc_data_segment : f2fs_iget is failed : get_valid_blocks() != 0, so that retry --> here we got the infinite loop. This patch resolved this issue. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
Introduce a simple macro function for readability. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch tries to avoid the following deadlock condition of which the reclaim path can trigger f2fs_balance_fs again. ================================= [ INFO: inconsistent lock state ] --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/41 [HC0[0]:SC0[0]:HE1:SE1] takes: (&sbi->gc_mutex){+.+.?.}, at: f2fs_balance_fs+0xe6/0x100 [f2fs] {RECLAIM_FS-ON-W} state was registered at: [<ffffffff810aa5a9>] mark_held_locks+0xb9/0x140 [<ffffffff810aae85>] lockdep_trace_alloc+0x85/0xf0 [<ffffffff8113ab2c>] __alloc_pages_nodemask+0x7c/0x9b0 [<ffffffff81175aa8>] alloc_pages_current+0xb8/0x180 [<ffffffff811319cf>] __page_cache_alloc+0xaf/0xd0 [<ffffffff8113225c>] find_or_create_page+0x4c/0xb0 [<ffffffffa021359e>] find_data_page+0x14e/0x210 [f2fs] [<ffffffffa021161b>] f2fs_gc+0x9eb/0xd90 [f2fs] [<ffffffffa0218fae>] f2fs_balance_fs+0xee/0x100 [f2fs] [<ffffffffa020848c>] f2fs_setattr+0x6c/0x200 [f2fs] [<ffffffff811ae51b>] notify_change+0x1db/0x3a0 [<ffffffff8118fbd0>] do_truncate+0x60/0xa0 [<ffffffff8118fd95>] vfs_truncate+0x185/0x1b0 [<ffffffff8118fe1c>] do_sys_truncate+0x5c/0xa0 [<ffffffff8118ffee>] SyS_truncate+0xe/0x10 [<ffffffff816e2b42>] system_call_fastpath+0x16/0x1b Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
If we met an error during the dentry recovery, we should not conduct checkpoint. Otherwise, some errorneous dentry blocks overwrites the existing blocks that contain the remaining recovery information. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
If we got an error after lock_page, we should unlock it before exit. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
The allocated page used by the recovery is not on HIGHMEM, so that we don't need to use kmap/kunmap. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Namjae Jeon authored
Few things can be changed in the default mkwrite function 1) Make file_update_time at the start before acquiring any lock 2) the condition page_offset(page) >= i_size_read(inode) should be changed to page_offset(page) > i_size_read 3) Move wait_on_page_writeback. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
majianpeng authored
We can do this, since now we use a global mutex, f2fs_stat_mutex to protect its list operations. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> [Jaegeuk Kim: add description] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Haicheng Li authored
Code cleanup without behavior changed. Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Peter Zijlstra authored
Majianpeng reported a lockdep splat for f2fs. It turns out mutex_lock_all() acquires an array of locks (in global/local lock style). Any such operation is always serialized using cp_mutex, therefore there is no fs_lock[] lock-order issue; tell lockdep about this using the mutex_lock_nest_lock() primitive. Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch adds some trivial debugging messages in the recovery process. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
I found a bug when testing power-off-recovery as follows. [Bug Scenario] 1. create a file 2. fsync the file 3. reboot w/o any sync 4. try to recover the file - found its fsync mark - found its dentry mark : try to recover its dentry - get its file name - get its parent inode number : here we got zero value The reason why we get the wrong parent inode number is that we didn't synchronize the inode page with its newly created inode information perfectly. Especially, previous f2fs stores fi->i_pino and writes it to the cached node page in a wrong order, which incurs the zero-valued i_pino during the recovery. So, this patch modifies the creation flow to fix the synchronization order of inode page with its inode. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch is for passing a locked node page to get_dnode_of_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
If get_dnode_of_data gets a locked node page, let's skip redundant get_node_page calls. This is for the futher enhancement. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This por_doing check is totally not related to the recovery process. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
During the dentry recovery routine, recover_inode() triggers __f2fs_add_link with its directory inode. In the following scenario, a bug is captured. 1. dir = f2fs_iget(pino) 2. __f2fs_add_link(dir, name) 3. iput(dir) -> f2fs_evict_inode() faces with BUG_ON(atomic_read(fi->dirty_dents)) Kernel BUG at ffffffffa01c0676 [verbose debug info unavailable] [<ffffffffa01c0676>] f2fs_evict_inode+0x276/0x300 [f2fs] Call Trace: [<ffffffff8118ea00>] evict+0xb0/0x1b0 [<ffffffff8118f1c5>] iput+0x105/0x190 [<ffffffffa01d2dac>] recover_fsync_data+0x3bc/0x1070 [f2fs] [<ffffffff81692e8a>] ? io_schedule+0xaa/0xd0 [<ffffffff81690acb>] ? __wait_on_bit_lock+0x7b/0xc0 [<ffffffff8111a0e7>] ? __lock_page+0x67/0x70 [<ffffffff81165e21>] ? kmem_cache_alloc+0x31/0x140 [<ffffffff8118a502>] ? __d_instantiate+0x92/0xf0 [<ffffffff812a949b>] ? security_d_instantiate+0x1b/0x30 [<ffffffff8118a5b4>] ? d_instantiate+0x54/0x70 This means that we should flush all the dentry pages between iget and iput(). But, during the recovery routine, it is unallowed due to consistency, so we have to wait the whole recovery process. And then, write_checkpoint flushes all the dirty dentry blocks, and nicely we can put the stale dir inodes from the dirty_dir_inode_list. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
The reason of using sbi->por_doing is to alleviate data writes during the recovery. The find_fsync_dnodes() produces some dirty dentry pages, so we should cover it too with sbi->por_doing. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
We don't need to assign a value redundantly. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
In get_lock_data_page, if there is a data race between get_dnode_of_data for node and grab_cache_page for data, f2fs is able to face with the following BUG_ON(dn.data_blkaddr == NEW_ADDR). kernel BUG at /home/zeus/f2fs_test/src/fs/f2fs/data.c:251! [<ffffffffa044966c>] get_lock_data_page+0x1ec/0x210 [f2fs] Call Trace: [<ffffffffa043b089>] f2fs_readdir+0x89/0x210 [f2fs] [<ffffffff811a0920>] ? fillonedir+0x100/0x100 [<ffffffff811a0920>] ? fillonedir+0x100/0x100 [<ffffffff811a07f8>] vfs_readdir+0xb8/0xe0 [<ffffffff811a0b4f>] sys_getdents+0x8f/0x110 [<ffffffff816d7999>] system_call_fastpath+0x16/0x1b This bug is able to be occurred when the block address of the data block is changed after f2fs_put_dnode(). In order to avoid that, this patch fixes the lock order of node and data blocks in which the node block lock is covered by the data block lock. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
Currently f2fs recovers the dentry of fsynced files. When power-off-recovery is conducted, this newly recovered inode should increase node block count as well as inode block count. This patch resolves this inconsistency that results in: 1. create a file 2. write data 3. fsync 4. reboot without sync 5. mount and recover the file 6. node block count is 1 and inode block count is 2 : fall into the inconsistent state 7. unlink the file : trigger the following BUG_ON ------------[ cut here ]------------ kernel BUG at /home/zeus/f2fs_test/src/fs/f2fs/f2fs.h:716! Call Trace: [<ffffffffa0344100>] ? get_node_page+0x50/0x1a0 [f2fs] [<ffffffffa0344bfc>] remove_inode_page+0x8c/0x100 [f2fs] [<ffffffffa03380f0>] ? f2fs_evict_inode+0x180/0x2d0 [f2fs] [<ffffffffa033812e>] f2fs_evict_inode+0x1be/0x2d0 [f2fs] [<ffffffff811c7a67>] evict+0xa7/0x1a0 [<ffffffff811c82b5>] iput+0x105/0x190 [<ffffffff811c2b30>] d_kill+0xe0/0x120 [<ffffffff811c2c57>] dput+0xe7/0x1e0 [<ffffffff811acc3d>] __fput+0x19d/0x2d0 [<ffffffff811acd7e>] ____fput+0xe/0x10 [<ffffffff81070645>] task_work_run+0xb5/0xe0 [<ffffffff81002941>] do_notify_resume+0x71/0xb0 [<ffffffff8175f14a>] int_signal+0x12/0x17 Reported-and-Tested-by: Chris Fries <C.Fries@motorola.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 26 May, 2013 3 commits
-
-
Linus Torvalds authored
-
Manfred Spraul authored
do_smart_update_queue() is called when an operation (semop, semctl(SETVAL), semctl(SETALL), ...) modified the array. It must check which of the sleeping tasks can proceed. do_smart_update_queue() missed a few wakeups: - if a sleeping complex op was completed, then all per-semaphore queues must be scanned - not only those that were modified by *sops - if a sleeping simple op proceeded, then the global queue must be scanned again And: - the test for "|sops == NULL) before scanning the global queue is not required: If the global queue is empty, then it doesn't need to be scanned - regardless of the reason for calling do_smart_update_queue() The patch is not optimized, i.e. even completing a wait-for-zero operation causes a rescan. This is done to keep the patch as simple as possible. Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Stable fix to prevent an rpc_task wakeup race - Fix a NFSv4.1 session drain deadlock - Fix a NFSv4/v4.1 mount regression when not running rpc.gssd - Ensure auth_gss pipe detection works in namespaces - Fix SETCLIENTID fallback if rpcsec_gss is not available * tag 'nfs-for-3.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix SETCLIENTID fallback if GSS is not available SUNRPC: Prevent an rpc_task wakeup race NFSv4.1 Fix a pNFS session draining deadlock SUNRPC: Convert auth_gss pipe detection to work in namespaces SUNRPC: Faster detection if gssd is actually running SUNRPC: Fix a bug in gss_create_upcall
-