into suse.cz:/home/perex/bk/linux-sound/work

into suse.cz:/home/perex/bk/linux-sound/linux-sound

au88x0 driver
Fixed possible spin deadlocks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

OPL3,OPL4,I2C lib core,L3 drivers,AK4117 receiver,ALSA Core
EMU8000 driver,AC97 Codec Core,AK4531 codec
Added SNDRV_DEV_CODEC and SNDRV_DEV_BUS types to tell from the lowlevel
components.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

USB USX2Y
Removed the superfluous creation/deletion of lowlevel component.
It's not used at all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AZT3328 driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
Maestro3 driver,SonicVibes driver,CS46xx driver,KORG1212 driver
NM256 driver,Trident driver,YMFPCI driver
Make sure that the chip instance is created at first before other components.
This will fix occasional oops at unloading due to the access to the released
resources.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA<-OSS emulation
Got rid of the unused float codes (the legacy code for sharing with ALSA
library).
Add assert to the invalid conversion indices which results in oops
(just to be sure).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation
Added the description about snd_card_set_dev().
Misc cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Control Midlevel
Implemented free callback to fix the release of control resources
before calling register.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation
Updated descriptions about the firmware loading for the recent support of
hotplug firmware loader.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

RME HDSP driver
Added the hotplug firmware loader support without hdsploader.
The firmware data must be installed beforehand in the proper place from
the latest alsa-firmware package.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

EMU10K1/EMU10K2 driver
Removed an unused variable to fix a compile warning.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AZT3328 driver
Fixed compile warning when built without joystick support.
(Optimized via inline.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>

USB USX2Y
Return -EBUSY from snd_usX2Y_usbpcm_open(), if the associated hwdep
device is not opened.

It now works as originally intended. Had forgotten a pair of parenthesis.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Remove nowhere referenced file. (egrep "filename\." didn't find
anything)
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

EMU10K1/EMU10K2 driver
Small code clean up.  Use snd_pcm_lib_preallocage_pages_for_all()
for buffer allocation.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

YMFPCI driver
Avoid VRA setting on ac97 codec chips.  YMFPCI doesn't need VRA.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation,PCI drivers,CA0106 driver
Added snd-ca0106 driver for SB Audigy LS / Live 24bit boards
by James Courtier-Dutton <James@superbug.demon.co.uk>.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation,PCI drivers,EMU10K1/EMU10K2 driver
Added the new driver, snd-emu10k1x, for SB Live Dell OEM version
by Francisco Moraes <fmoraes@nc.rr.com>.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AC97 Codec Core,Intel8x0 driver,VIA82xx driver
Since there are many ac97_quirk values, the number is no longer good to
remember what it really means.  Now ac97_quirk option becomes as a string
option, and more undstandable.  For example, you can pass like
'ac97_quirk=hp_only'.  The old number is still kept and parsed for backward
compatibility.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Control Midlevel,ALSA Core
Fixed handling of user-defined controls.
The max number of user-defined controls is limited, too (as default 32).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AC97 Codec Core
Don't probe rates and set VRA/VRM bits when bus->no_vra is set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

CS46xx driver,NM256 driver
Use msleep() instead of mdelay() in ac97 callbacks (spinlock was removed).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

au88x0 driver
Removed unnecessary spinlocks.
The invalid (typo) loop in the codec read callback is fixed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

FM801 driver
Fixed the possible deadlock with no irq spinlock.
Also, spin_lock_irqsave() is replaced with spin_lock_irq() in some places.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ATIIXP driver,ATIIXP-modem driver,ENS1370/1+ driver,Intel8x0 driver
Intel8x0-modem driver,Maestro3 driver,VIA82xx driver
VIA82xx-modem driver
Removed unnecessary spinlocks in ac97 callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AC97 Codec Core,AK4531 codec
Removed spinlocks in callback, use sempahore instead since all ac97
callbacks are supposed to be non-atomic.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AC97 Codec Core
Unified single_* and double_* control callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

au88x0 driver
Long udelay()'s are replaced with msleep() as much as possible.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Control Midlevel,ALSA Core
Don't create control devices before the driver initialization finishes
(ALSA BTS #742).

The control device is now handled in the device list together with others
(holding the card instance as the device pointer).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AC97 Codec Core,Intel8x0 driver
A new quirk type, AC97_TUNE_MUTE_LED, is added for HP/Compaq laptops.
With this quirk, the EAPD bit is used to control the mute LED in
conjunction with the master mute switch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Wavefront drivers
Fixed compile warning regarding the sign of char.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

PCM Midlevel
Fix suggested by Benjamin Herrenschmidt <benh@kernel.crashing.org>

On architectures like PPC, char is handled as 'unsigned char', thus the
pcm_format_data table entries with -1 give a positive 255.  This causes
Oops with OSS-emulation on such architectures.

The patch simply adds the right signed/unsigned prefix to fix this problem.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

RME HDSP driver
The value returned by controllers for control number 14 ('AutoSync
Reference') is incorrect and different from that reported by doing
a cat /proc/asound/card0/hdsp.
The value reported is not 'AutoSync Reference' but 'Preferred Sync
Reference' instead.
Signed-off-by: Remy Bruno <remy.bruno@trinnov.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA Core
Added SNDRV_HWDEP_IFACE_PCXHR for Digigram PCXHR driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

PPC PMAC driver
Fixed the bug returning invalid DMA pointer values.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Digigram VX core,MIXART driver
Fix compilation errors when built without hotplug fw loader.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AC97 Codec Core
Fix by Zinx Verituse <zinx@epicsol.org>
The patch for cmi9739a is added.  The undocumented unmute bits are
enabled.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ES1938 driver
The patch ensures that a es1938 based sound card generates interrupts on
incoming MIDI events. I tested the patch successfully on an ess Solo-1 in
a AlphaPC UX/164.
Signed-off-by: Andreas Feldner <pelzi@flying-snail.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation
New descriptions about hotplug fw loader for vx and mixart drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>