- 02 Feb, 2011 6 commits
-
-
Stefan Weil authored
This error was reported by cppcheck: drivers/s390/net/netiucv.c:568: error: Using sizeof for array given as function argument returns the size of pointer. sizeof(ipuser) did not result in 16 (as many programmers would have expected) but sizeof(u8 *), so it is 4 or 8, too small here. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
For OSA the CHPARM-definition determines the number of available outbound queues. A CHPARM-change may occur while a Linux system with probed OSA device is in suspend state. This patch enables proper resuming of an OSA device in this case. Signed-off-by: Ursula braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
For HiperSockets the framesize-definition determines the selected mtu-size and the size of the allocated qdio buffers. A framesize-change may occur while a Linux system with probed HiperSockets device is in suspend state. This patch enables proper resuming of a HiperSockets device in this case. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frank Blaschka authored
HiperSockets and OSA hardware report a maximum MTU size. Add checking to reject larger MTUs than allowed by hardware. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
Setting of a MAC-address may fail because an already used MAC-address is to bet set or because of authorization problems. In those cases qeth issues a message, but the mentioned MAC-address is not the new MAC-address to be set, but the actual MAC-address. This patch chooses now the new MAC-address to be set for the error messages. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Gospodarek authored
Like Herbert's change from a few days ago: 66c46d74 gro: Reset dev pointer on reuse this may not be necessary at this point, but we should still clean up the skb->skb_iif. If not we may end up with an invalid valid for skb->skb_iif when the skb is reused and the check is done in __netif_receive_skb. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Feb, 2011 14 commits
-
-
Ajit Khaparde authored
It is illegal to call netif_stop_queue before register_netdev. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
While running insmod/rmood in a loop, an unnecessary netif_stop_queue causes the system to crash. Remove the netif_stop_queue call and netif_start_queue in the link status update path. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Weil authored
This warning was reported by cppcheck: drivers/isdn/icn/icn.c:1641: error: Dangerous usage of 'rev' (strncpy doesn't always 0-terminate it) If strncpy copied 20 bytes, the destination string rev was not terminated. The patch adds one more byte to rev and makes sure that this byte is always 0. Cc: Karsten Keil <isdn@linux-pingi.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Cox authored
Replace the rather weird use of ++ with + 1 as the value is being assigned Signed-off-by: Alan Cox <alan@linux.intel.com>
-
-
Stefan Weil authored
This error is reported by cppcheck: drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead? It looks like cppcheck is correct, so fix this. No test was run. Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Sivakumar Subramani <sivakumar.subramani@exar.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Cc: Jon Mason <jon.mason@exar.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohammed Shafi Shajakhan authored
free the skb's when the Tx of PAPRD frames fails and also add a debug message indicating that. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael S. Tsirkin authored
When built with rcu checks enabled, vhost triggers bogus warnings as vhost features are read without dev->mutex sometimes, and private pointer is read with our kind of rcu where work serves as a read side critical section. Fixing it properly is not trivial. Disable the warnings by stubbing out the checks for now. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Stefan Weil authored
This error was reported by cppcheck: drivers/net/enc28j60.c:815: error: Using sizeof for array given as function argument returns the size of pointer. The original code reads 4 or 8 bytes instead of TSV_SIZE (= 100) bytes. I just fixed the code, but did not run any tests. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
In my testing of 2.6.37 I was occassionally getting a warning about sysctl table entries being unregistered in the wrong order. Digging in it turns out this dates back to the last great sysctl reorg done where Al Viro introduced the requirement that sysctl directories needed to be created before and destroyed after the files in them. It turns out that in that great reorg /proc/sys/net/ipv6/neigh was overlooked. So this patch fixes that oversight and makes an annoying warning message go away. >------------[ cut here ]------------ >WARNING: at kernel/sysctl.c:1992 unregister_sysctl_table+0x134/0x164() >Pid: 23951, comm: kworker/u:3 Not tainted 2.6.37-350888.2010AroraKernelBeta.fc14.x86_64 #1 >Call Trace: > [<ffffffff8103e034>] warn_slowpath_common+0x80/0x98 > [<ffffffff8103e061>] warn_slowpath_null+0x15/0x17 > [<ffffffff810452f8>] unregister_sysctl_table+0x134/0x164 > [<ffffffff810e7834>] ? kfree+0xc4/0xd1 > [<ffffffff813439b2>] neigh_sysctl_unregister+0x22/0x3a > [<ffffffffa02cd14e>] addrconf_ifdown+0x33f/0x37b [ipv6] > [<ffffffff81331ec2>] ? skb_dequeue+0x5f/0x6b > [<ffffffffa02ce4a5>] addrconf_notify+0x69b/0x75c [ipv6] > [<ffffffffa02eb953>] ? ip6mr_device_event+0x98/0xa9 [ipv6] > [<ffffffff813d2413>] notifier_call_chain+0x32/0x5e > [<ffffffff8105bdea>] raw_notifier_call_chain+0xf/0x11 > [<ffffffff8133cdac>] call_netdevice_notifiers+0x45/0x4a > [<ffffffff8133d2b0>] rollback_registered_many+0x118/0x201 > [<ffffffff8133d3af>] unregister_netdevice_many+0x16/0x6d > [<ffffffff8133d571>] default_device_exit_batch+0xa4/0xb8 > [<ffffffff81337c42>] ? cleanup_net+0x0/0x194 > [<ffffffff81337a2a>] ops_exit_list+0x4e/0x56 > [<ffffffff81337d36>] cleanup_net+0xf4/0x194 > [<ffffffff81053318>] process_one_work+0x187/0x280 > [<ffffffff8105441b>] worker_thread+0xff/0x19f > [<ffffffff8105431c>] ? worker_thread+0x0/0x19f > [<ffffffff8105776d>] kthread+0x7d/0x85 > [<ffffffff81003824>] kernel_thread_helper+0x4/0x10 > [<ffffffff810576f0>] ? kthread+0x0/0x85 > [<ffffffff81003820>] ? kernel_thread_helper+0x0/0x10 >---[ end trace 8a7e9310b35e9486 ]--- Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ken Kawasaki authored
axnet_cs: mdelay of 10ms is too long at ei_rx_overrun. It should be reduced to 2ms. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
In get_rps_cpu, add check that the rps_flow_table for the device is NULL when trying to take fast path when RPS map length is one. Without this, RFS is effectively disabled if map length is one which is not correct. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Jan, 2011 9 commits
-
-
Chuck Ebbert authored
Without this dependency the softing driver will be buildable on s390, where it fails. Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roland Dreier authored
When an IPSEC SA is still being set up, __xfrm_lookup() will return -EREMOTE and so ip_route_output_flow() will return a blackhole route. This can happen in a sndmsg call, and after d33e4553 ("net: Abstract default MTU metric calculation behind an accessor.") this leads to a crash in ip_append_data() because the blackhole dst_ops have no default_mtu() method and so dst_mtu() calls a NULL pointer. Fix this by adding default_mtu() methods (that simply return 0, matching the old behavior) to the blackhole dst_ops. The IPv4 part of this patch fixes a crash that I saw when using an IPSEC VPN; the IPv6 part is untested because I don't have an IPv6 VPN, but it looks to be needed as well. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mathias Krause authored
When DEBUG_SPI is included in the debug log level wl1271_spi_reset() will dump the already freed memory instead of the SPI buffer. This bug was spotted by the semantic patch tool coccinelle using the script found at scripts/coccinelle/free/kfree.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Yaniv Rosner authored
Update bnx2x version to 1.62.00-5 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yaniv Rosner authored
All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yaniv Rosner authored
Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yaniv Rosner authored
Fix blink rate of activity LED of the BCM84823 on 10G link Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yaniv Rosner authored
A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that. The fix is not to set set XAUI low power mode for this PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
- 30 Jan, 2011 8 commits
-
-
Sven Eckelmann authored
The batman-adv vis server has to a stack which stores all information about packets which should be send later. This stack is protected with a spinlock that is used to prevent concurrent write access to it. The send_vis_packets function has to take all elements from the stack and send them to other hosts over the primary interface. The send will be initiated without the lock which protects the stack. The implementation using list_for_each_entry_safe has the problem that it stores the next element as "safe ptr" to allow the deletion of the current element in the list. The list may be modified during the unlock/lock pair in the loop body which may make the safe pointer not pointing to correct next element. It is safer to remove and use the first element from the stack until no elements are available. This does not need reduntant information which would have to be validated each time the lock was removed. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
Sven Eckelmann authored
The free_info function will be called when no reference to the info object exists anymore. It must be ensured that the allocated memory gets freed and not only the elements which are managed by the info object. Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
Sven Eckelmann authored
A newly created vis info object must be removed when it couldn't be added to the hash. The old_info which has to be replaced was already removed and isn't related to the hash anymore. Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
Eric W. Biederman authored
SIOCGETSGCNT is not a unique ioctl value as it it maps tio SIOCPROTOPRIVATE +1, which unfortunately means the existing infrastructure for compat networking ioctls is insufficient. A trivial compact ioctl implementation would conflict with: SIOCAX25ADDUID SIOCAIPXPRISLT SIOCGETSGCNT_IN6 SIOCGETSGCNT SIOCRSSCAUSE SIOCX25SSUBSCRIP SIOCX25SDTEFACILITIES To make this work I have updated the compat_ioctl decode path to mirror the the normal ioctl decode path. I have added an ipv4 inet_compat_ioctl function so that I can have ipv4 specific compat ioctls. I have added a compat_ioctl function into struct proto so I can break out ioctls by which kind of ip socket I am using. I have added a compat_raw_ioctl function because SIOCGETSGCNT only works on raw sockets. I have added a ipmr_compat_ioctl that mirrors the normal ipmr_ioctl. This was necessary because unfortunately the struct layout for the SIOCGETSGCNT has unsigned longs in it so changes between 32bit and 64bit kernels. This change was sufficient to run a 32bit ip multicast routing daemon on a 64bit kernel. Reported-by: Bill Fenner <fenner@aristanetworks.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Ed Swierk <eswierk@bigswitch.com> writes: > On 2.6.35.7 > ip link add link eth0 netns 9999 type macvlan > where 9999 is a nonexistent PID triggers an oops and causes all network functions to hang: > [10663.821898] BUG: unable to handle kernel NULL pointer dereference at 000000000000006d > [10663.821917] IP: [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170 > [10663.821933] PGD 1d3927067 PUD 22f5c5067 PMD 0 > [10663.821944] Oops: 0000 [#1] SMP > [10663.821953] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq > [10663.821959] CPU 3 > [10663.821963] Modules linked in: macvlan ip6table_filter ip6_tables rfcomm ipt_MASQUERADE binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack sco ipt_REJECT bnep l2cap xt_tcpudp iptable_filter ip_tables x_tables bridge stp vboxnetadp vboxnetflt vboxdrv kvm_intel kvm parport_pc ppdev snd_hda_codec_intelhdmi snd_hda_codec_conexant arc4 iwlagn iwlcore mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi i915 snd_seq_midi_event snd_seq thinkpad_acpi drm_kms_helper btusb tpm_tis nvram uvcvideo snd_timer snd_seq_device bluetooth videodev v4l1_compat v4l2_compat_ioctl32 tpm drm tpm_bios snd cfg80211 psmouse serio_raw intel_ips soundcore snd_page_alloc intel_agp i2c_algo_bit video output netconsole configfs lp parport usbhid hid e1000e sdhci_pci ahci libahci sdhci led_class > [10663.822155] > [10663.822161] Pid: 6000, comm: ip Not tainted 2.6.35-23-generic #41-Ubuntu 2901CTO/2901CTO > [10663.822167] RIP: 0010:[<ffffffff8149c2fa>] [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170 > [10663.822177] RSP: 0018:ffff88014aebf7b8 EFLAGS: 00010286 > [10663.822182] RAX: 00000000fffffff4 RBX: ffff8801ad900800 RCX: 0000000000000000 > [10663.822187] RDX: ffff880000000000 RSI: 0000000000000000 RDI: ffff88014ad63000 > [10663.822191] RBP: ffff88014aebf808 R08: 0000000000000041 R09: 0000000000000041 > [10663.822196] R10: 0000000000000000 R11: dead000000200200 R12: ffff88014aebf818 > [10663.822201] R13: fffffffffffffffd R14: ffff88014aebf918 R15: ffff88014ad62000 > [10663.822207] FS: 00007f00c487f700(0000) GS:ffff880001f80000(0000) knlGS:0000000000000000 > [10663.822212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [10663.822216] CR2: 000000000000006d CR3: 0000000231f19000 CR4: 00000000000026e0 > [10663.822221] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [10663.822226] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [10663.822231] Process ip (pid: 6000, threadinfo ffff88014aebe000, task ffff88014afb16e0) > [10663.822236] Stack: > [10663.822240] ffff88014aebf808 ffffffff814a2bb5 ffff88014aebf7e8 00000000a00ee8d6 > [10663.822251] <0> 0000000000000000 ffffffffa00ef940 ffff8801ad900800 ffff88014aebf818 > [10663.822265] <0> ffff88014aebf918 ffff8801ad900800 ffff88014aebf858 ffffffff8149c413 > [10663.822281] Call Trace: > [10663.822290] [<ffffffff814a2bb5>] ? dev_addr_init+0x75/0xb0 > [10663.822298] [<ffffffff8149c413>] dev_alloc_name+0x43/0x90 > [10663.822307] [<ffffffff814a85ee>] rtnl_create_link+0xbe/0x1b0 > [10663.822314] [<ffffffff814ab2aa>] rtnl_newlink+0x48a/0x570 > [10663.822321] [<ffffffff814aafcc>] ? rtnl_newlink+0x1ac/0x570 > [10663.822332] [<ffffffff81030064>] ? native_x2apic_icr_read+0x4/0x20 > [10663.822339] [<ffffffff814a8c17>] rtnetlink_rcv_msg+0x177/0x290 > [10663.822346] [<ffffffff814a8aa0>] ? rtnetlink_rcv_msg+0x0/0x290 > [10663.822354] [<ffffffff814c25d9>] netlink_rcv_skb+0xa9/0xd0 > [10663.822360] [<ffffffff814a8a85>] rtnetlink_rcv+0x25/0x40 > [10663.822367] [<ffffffff814c223e>] netlink_unicast+0x2de/0x2f0 > [10663.822374] [<ffffffff814c303e>] netlink_sendmsg+0x1fe/0x2e0 > [10663.822383] [<ffffffff81488533>] sock_sendmsg+0xf3/0x120 > [10663.822391] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20 > [10663.822400] [<ffffffff81168656>] ? __d_lookup+0x136/0x150 > [10663.822406] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20 > [10663.822414] [<ffffffff812b7a0d>] ? _atomic_dec_and_lock+0x4d/0x80 > [10663.822422] [<ffffffff8116ea90>] ? mntput_no_expire+0x30/0x110 > [10663.822429] [<ffffffff81486ff5>] ? move_addr_to_kernel+0x65/0x70 > [10663.822435] [<ffffffff81493308>] ? verify_iovec+0x88/0xe0 > [10663.822442] [<ffffffff81489020>] sys_sendmsg+0x240/0x3a0 > [10663.822450] [<ffffffff8111e2a9>] ? __do_fault+0x479/0x560 > [10663.822457] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20 > [10663.822465] [<ffffffff8116cf4a>] ? alloc_fd+0x10a/0x150 > [10663.822473] [<ffffffff8158d76e>] ? do_page_fault+0x15e/0x350 > [10663.822482] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b > [10663.822487] Code: 90 48 8d 78 02 be 25 00 00 00 e8 92 1d e2 ff 48 85 c0 75 cf bf 20 00 00 00 e8 c3 b1 c6 ff 49 89 c7 b8 f4 ff ff ff 4d 85 ff 74 bd <4d> 8b 75 70 49 8d 45 70 48 89 45 b8 49 83 ee 58 eb 28 48 8d 55 > [10663.822618] RIP [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170 > [10663.822627] RSP <ffff88014aebf7b8> > [10663.822631] CR2: 000000000000006d > [10663.822636] ---[ end trace 3dfd6c3ad5327ca7 ]--- This bug was introduced in: commit 81adee47 Author: Eric W. Biederman <ebiederm@aristanetworks.com> Date: Sun Nov 8 00:53:51 2009 -0800 net: Support specifying the network namespace upon device creation. There is no good reason to not support userspace specifying the network namespace during device creation, and it makes it easier to create a network device and pass it to a child network namespace with a well known name. We have to be careful to ensure that the target network namespace for the new device exists through the life of the call. To keep that logic clear I have factored out the network namespace grabbing logic into rtnl_link_get_net. In addtion we need to continue to pass the source network namespace to the rtnl_link_ops.newlink method so that we can find the base device source network namespace. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Where apparently I forgot to add error handling to the path where we create a new network device in a new network namespace, and pass in an invalid pid. Cc: stable@kernel.org Reported-by: Ed Swierk <eswierk@bigswitch.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
sjur.brandeland@stericsson.com authored
Add caif_socket.h and if_caif.h to the kernel header files exported for use by userspace. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Hartkopp authored
Fix the referenced project website to www.mictronics.de in the Kconfig help text for the slcan driver. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
On older kernels the VLAN code may zero skb->dev before dropping it and causing it to be reused by GRO. Unfortunately we didn't reset skb->dev in that case which causes the next GRO user to get a bogus skb->dev pointer. This particular problem no longer happens with the current upstream kernel due to changes in VLAN processing. However, for correctness we should still reset the skb->dev pointer in the GRO reuse function in case a future user does the same thing. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Jan, 2011 2 commits
-
-
Rajkumar Manoharan authored
While unloading the driver, the ps_usecount is incremented before configuring gpio registers in deinit_device. But it is failed to restore the ps_usecount after that. The problem is that the chip is forcibly moved to FULL SLEEP by radio_disable when mac80211 is reporting as idle though ps_usecount is not zero. This patch retores ps_usecount properly and ensures that the chip is always moved to full sleep only if ps usage count is zero which also helps in debugging deadbeef on multivif case. And also fixes the following warning. ath: DMA failed to stop in 10 ms AR_CR=0xdeadbeef AR_DIAG_SW=0xdeadbeef ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:536 ath_stoprecv+0xf4/0x100 [ath9k]() Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
The bit 6 & 7 of AR_WA (0x4004) should be enabled only for the chips that are supporting L0s functionality while resuming back from S3/S4. Enabling these bits for AR9280 is causing system hang within a few S3/S4-resume cycles. Cc: stable@kernel.org Cc: Jack Lee <jlee@atheros.com> Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 27 Jan, 2011 1 commit
-
-
David S. Miller authored
They are bogus. The basic idea is that I wanted to make sure that prefixed routes never bind to peers. The test I used was whether RTF_CACHE was set. But first of all, the RTF_CACHE flag is set at different spots depending upon which ip6_rt_copy() caller you're talking about. I've validated all of the code paths, and even in the future where we bind peers more aggressively (for route metric COW'ing) we never bind to prefix'd routes, only fully specified ones. This even applies when addrconf or icmp6 routes are allocated. Signed-off-by: David S. Miller <davem@davemloft.net>
-