- 06 Dec, 2017 1 commit
-
-
Daniel Borkmann authored
i) Add the bpf and bpf-next trees to the maintainers entry so they can be found easily and picked up by test bots etc that would integrate all trees from maintainers file. Suggested by Stephen while integrating the trees into linux-next. ii) Add the two headers defining BPF/XDP tracepoints to the list of files as well. Suggested-by:Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
- 05 Dec, 2017 1 commit
-
-
Lawrence Brakmo authored
Adds read access to snd_cwnd and srtt_us fields of tcp_sock. Since these fields are only valid if the socket associated with the sock_ops program call is a full socket, the field is_fullsock is also added to the bpf_sock_ops struct. If the socket is not a full socket, reading these fields returns 0. Note that in most cases it will not be necessary to check is_fullsock to know if there is a full socket. The context of the call, as specified by the 'op' field, can sometimes determine whether there is a full socket. The struct bpf_sock_ops has the following fields added: __u32 is_fullsock; /* Some TCP fields are only valid if * there is a full socket. If not, the * fields read as zero. */ __u32 snd_cwnd; __u32 srtt_us; /* Averaged RTT << 3 in usecs */ There is a new macro, SOCK_OPS_GET_TCP32(NAME), to make it easier to add read access to more 32 bit tcp_sock fields. Signed-off-by:Lawrence Brakmo <brakmo@fb.com> Acked-by:
-
- 04 Dec, 2017 16 commits
-
-
William Tu authored
trivial move the BPF_F_ZERO_CSUM_TX check right below the 'flags & BPF_F_DONT_FRAGMENT', so common tun_flags handling is logically together. Signed-off-by:
William Tu <u9012063@gmail.com> Acked-by:
-
Florian Westphal authored
convert remaining users of rtnl_register to rtnl_register_module and un-export rtnl_register. Requested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.16-20171201' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-12-01 this is a pull request of 10 patches for net-next/master. The first two patches are by Arnd Bergmann, they convert the peak_usb from using "struct timeval" to "ktime_t". The error handling in the vxcan driver is clean up by Markus Elfring's patch. Bhumika Goyal contributes a patch for the c_can_pci driver to make the pci data const. The six patches by Pankaj Bansal for the flexcan driver add LS1021A support by making the endianness of the driver configurable by the device tree. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2017-12-03 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Addition of a software model for BPF offloads in order to ease testing code changes in that area and make semantics more clear. This is implemented in a new driver called netdevsim, which can later also be extended for other offloads. SR-IOV support is added as well to netdevsim. BPF kernel selftests for offloading are added so we can track basic functionality as well as exercising all corner cases around BPF offloading, from Jakub. 2) Today drivers have to drop the reference on BPF progs they hold due to XDP on device teardown themselves. Change this in order to make XDP handling inside the drivers less error prone, and move disabling XDP to the core instead, also from Jakub. 3) Misc set of BPF verifier improvements and cleanups as preparatory work for upcoming BPF-to-BPF calls. Among others, this set also improves liveness marking such that pruning can be slightly more effective. Register and stack liveness information is now included in the verifier log as well, from Alexei. 4) nfp JIT improvements in order to identify load/store sequences in the BPF prog e.g. coming from memcpy lowering and optimizing them through the NPU's command push pull (CPP) instruction, from Jiong. 5) Cleanups to test_cgrp2_attach2.c BPF sample code in oder to remove bpf_prog_attach() magic values and replacing them with actual proper attach flag instead, from David. ==================== Signed-off-by: -
David S. Miller authored
Florian Westphal says: ==================== rtnetlink: rework handler (un)registering Peter Zijlstra reported (referring to commit 019a3169, "rtnetlink: add reference counting to prevent module unload while dump is in progress"): 1) it not in fact a refcount, so using refcount_t is silly 2) there is a distinct lack of memory barriers, so we can easily observe the decrement while the msg_handler is still in progress. 3) waiting with a schedule()/yield() loop is complete crap and subject life-locks, imagine doing that rtnl_unregister_all() from a RT task. In ancient times rtnetlink exposed a statically-sized table with preset doit/dumpit handlers to be called for a protocol/type pair. Later the rtnl_register interface was added and the table was allocated on demand. Eventually these were also used by modules. Problem is that nothing prevents module unload while a netlink dump is in progress. netlink dumps can be span multiple recv calls and netlink core saves the to-be-repeated dumper address for later invocation. To prevent rmmod the netlink core expects callers to pass in the owning module so a reference can be taken. So far rtnetlink wasn't doing this, add new interface to pass THIS_MODULE. Moreover, when converting parts of the rtnetlink handling to rcu this code gained way too many READ_ONCE spots, remove them and the extra refcounting. Take a module reference when running dumpit and doit callbacks and never alter content of rtnl_link structures after they have been published via rcu_assign_pointer. Based partially on earlier patch from Peter. ==================== Signed-off-by:
-
Florian Westphal authored
This removes __rtnl_register and switches callers to either rtnl_register or rtnl_register_module. Also, rtnl_register() will now print an error if memory allocation failed rather than panic the kernel. Signed-off-by:
-
Florian Westphal authored
all of these can be compiled as a module, so use new _module version to make sure module can no longer be removed while callback/dump is in use. Signed-off-by:
-
Florian Westphal authored
Add yet another rtnl_register function. It will be used by modules that can be removed. The passed module struct is used to prevent module unload while a netlink dump is in progress or when a DOIT_UNLOCKED doit callback is called. Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Florian Westphal authored
rtnetlink is littered with READ_ONCE() because we can have read accesses while another cpu can write to the structure we're reading by (un)registering doit or dumpit handlers. This patch changes this so that (un)registering cpu allocates a new structure and then publishes it via rcu_assign_pointer, i.e. once another cpu can see such pointer no modifications will occur anymore. based on initial patch from Peter Zijlstra. Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Heiner Kallweit authored
Previous patch mistakenly removed three chip-specific config settings. Add them again. Fixes: 80274aba "net: phy: remove generic settings for callbacks config_aneg and read_status from drivers" Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
William Tu says: ==================== add ip6 gre and gretap collect_md mode Similar to gre, vxlan, geneve, ipip tunnels, allow ip6gretap tunnels to operate in collect metadata mode. The first patch adds the support to ip6_gre.c. The second patch enables unsetting the csum for ipv6 tunnel, when using bpf_skb_[gs]et_tunnel_key() helpers. Finally, the last patch adds the ip6 gre and gretap tunnel test cases to BPF sample code. The corresponding iproute2 patch: https://marc.info/?l=linux-netdev&m=151216943128087&w=2 ==================== Signed-off-by:
-
William Tu authored
Extend existing tests for vxlan, gre, geneve, ipip, erspan, to include ip6 gre and gretap tunnel. Signed-off-by:
-
William Tu authored
Before the patch, BPF_F_ZERO_CSUM_TX can be used only for ipv4 tunnel. With introduction of ip6gretap collect_md mode, the flag should be also supported for ipv6. Signed-off-by:
-
William Tu authored
Similar to gre, vxlan, geneve, ipip tunnels, allow ip6 gre and gretap tunnels to operate in collect metadata mode. bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away. OVS can use it as well in the future. Signed-off-by:
-
Heiner Kallweit authored
If state is not PHY_HALTED I see no need to temporarily disable interrupts on the device. As long as the current interrupt isn't acked on the device no new interrupt can happen anyway. In addition remove a unneeded enabling of interrupts in the state machine when handling state PHY_CHANGELINK. Tested on a Odroid-C2 with RTL8211F phy in interrupt mode. Signed-off-by:
-
Heiner Kallweit authored
After commits c974bdbc "net: phy: Use threaded IRQ, to allow IRQ from sleeping devices" and 664fcf12 "net: phy: Threaded interrupts allow some simplification" all relevant code pieces run in process context anyway and I don't think we need the disabling of interrupts any longer. Interestingly enough, latter commit already removed the comment explaining why interrupts need to be temporarily disabled. On my system phy interrupt mode works fine with this patch. However I may miss something, especially in the context of shared phy interrupts, therefore I'd appreciate if more people could test this. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
- 03 Dec, 2017 22 commits
-
-
David S. Miller authored
Martin KaFai Lau says: ==================== tcp: Add a 2nd listener hashtable (port+addr) This patch set adds a 2nd listener hashtable. It is to resolve the performance issue when a process is listening at many IP addresses with the same port (e.g. [IP1]:443, [IP2]:443... [IPN]:443) v2: - Move the new lhash2 and lhash2_mask before the existing listening_hash to avoid adding another cacheline to inet_hashinfo (Suggested by Eric Dumazet, Thanks!) - I take this chance to plug an existing 4 bytes hole while adding 'unsigned int lhash2_mask'. - Add some comments about lhash2 in inet_hashtables.h ==================== Signed-off-by: -
Martin KaFai Lau authored
Enable the second listener hashtable in TCP. The scale is the same as UDP which is one slot per 2MB. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Martin KaFai Lau authored
The current listener hashtable is hashed by port only. When a process is listening at many IP addresses with the same port (e.g. [IP1]:443, [IP2]:443... [IPN]:443), the inet[6]_lookup_listener() performance is degraded to a link list. It is prone to syn attack. UDP had a similar issue and a second hashtable was added to resolve it. This patch adds a second hashtable for the listener's sockets. The second hashtable is hashed by port and address. It cannot reuse the existing skc_portaddr_node which is shared with skc_bind_node. TCP listener needs to use skc_bind_node. Instead, this patch adds a hlist_node 'icsk_listen_portaddr_node' to the inet_connection_sock which the listener (like TCP) also belongs to. The new portaddr hashtable may need two lookup (First by IP:PORT. Second by INADDR_ANY:PORT if the IP:PORT is a not found). Hence, it implements a similar cut off as UDP such that it will only consult the new portaddr hashtable if the current port-only hashtable has >10 sk in the link-list. lhash2 and lhash2_mask are added to 'struct inet_hashinfo'. I take this chance to plug a 4 bytes hole. It is done by first moving the existing bind_bucket_cachep up and then add the new (int lhash2_mask, *lhash2) after the existing bhash_size. Signed-off-by:
-
Martin KaFai Lau authored
This patch moves the udp[46]_portaddr_hash() to net/ip[v6].h. The function name is renamed to ipv[46]_portaddr_hash(). It will be used by a later patch which adds a second listener hashtable hashed by the address and port. Signed-off-by:
-
Martin KaFai Lau authored
This patch adds a count to the 'struct inet_listen_hashbucket'. It counts how many sk is hashed to a bucket. It will be used to decide if the (to-be-added) portaddr listener's hashtable should be used during inet[6]_lookup_listener(). Signed-off-by:
-
Govindarajulu Varadarajan authored
Add ethtool ops to advertise sw timestamping. Call skb_tx_timestamp() just before ringing the wq doorbell. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
David S. Miller authored
Stephen Hemminger says: ==================== hv_netvsc: minor optimizations These are a set of local optimizations the Hyper-V networking driver. Also include a vmbus patch in this set, because it depends on the netvsc that last used that function. ==================== Signed-off-by: -
Stephen Hemminger authored
The last use of hv_get_ringbuffer_availbytes in drivers is now gone. Only used by the debug info routine so make it static. Also, add READ_ONCE() to avoid any possible issues with potentially volatile index values. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Stephen Hemminger authored
The memset of the whole maximum possible RNDIS header is unnecessary. For the main part of the header use a structure assignment. No need to memset the whole per packet info. Instead rely on caller to set what it wants. Also get rid of cast to void and signed/unsigned conversion. Now return pointer to per packet data (rather than the header) which simplifies use by code setting up the packet data. Signed-off-by:
-
Stephen Hemminger authored
Every packet sent checks the available ring space. The calculation can be sped up by using reciprocal divide which is multiplication. Since ring_size can only be configured by module parameter, so it doesn't have to be passed around everywhere. Also it should be unsigned since it is number of pages. Signed-off-by:
-
Stephen Hemminger authored
Packet alignment is always a power of 2 therefore modulus can be replaced with a faster and operation Signed-off-by:
-
Stephen Hemminger authored
Since skb is always non-NULL in the copy portion of netvsc_send do not need local variable. Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Gao Feng authored
There are multiple duplicated condition checks in the current codes, so I add the new func ipvlan_is_valid_dev instead of the duplicated codes to check if the netdev is real ipvlan dev. Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
-
David S. Miller authored
Martin Blumenstingl says: ==================== Realtek Ethernet PHY driver improvements This series provides some small improvements and cleanups for the Realtek Ethernet PHY driver. None of the patches in this series should change any functionality. The goal is to make the code a bit easier to read by: - re-using the BIT and GENMASK macros (which makes it easier to compare the #defines in the kernel with the values from the datasheets) - rename a #define from a generic name to a PHY-specific name since it's only used for one specific PHY - logically group the register #defines and their register bit #defines together - indentation cleanups - removed some code duplicating for reading/writing registers on a Realtek specific "page" ==================== Signed-off-by: -
Martin Blumenstingl authored
Realtek PHYs implement the concept of so-called "extension pages". The reason for this is probably because these PHYs expose more registers than available in the standard address range. After all read/write operations on such a page are done the driver should switch back to page 0 where the standard MII registers (such as MII_BMCR) are available. When referring to such a register the datasheets of RTL8211E and RTL8211F always specify: - the page / "ext. page" which has to be written to RTL821x_PAGE_SELECT - an address (sometimes also called reg) These new utility functions make the existing code easier to read since it removes some duplication (switching back to page 0 is done within the new helpers for example). No functional changes are intended. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Martin Blumenstingl authored
This simply makes the code easier to read. No functional changes. Signed-off-by:
-
Martin Blumenstingl authored
This simply moves all register bit #defines which describe the (PHY specific) bits in the RTL821x_INER right below the RTL821x_INER register definition. This makes it easier to spot which registers and bits belong together. No functional changes. Signed-off-by:
-
Martin Blumenstingl authored
This macro is only used by the RTL8211B code. RTL8211E and RTL8211F both use other bits to initialize the RTL821x_INER register. No functional changes. Signed-off-by:
-
Martin Blumenstingl authored
This makes it easier to compare the #defines with the datasheets. No functional changes. Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: cross-chip FDB support DSA can have interconnected switches. For instance, the ZII Dev Rev B board described in arch/arm/boot/dts/vf610-zii-dev-rev-b.dts has a switch fabric composed of 3 switch devices like this: lan4 lan6 CPU (eth1) | lan5 | lan7 | | | | | [0 1 2 3 4 6 5]---[6 0 1 2 3 4 5]---[9 0 1 2 3 4 5 6 7 8] | | | | | | | lan0 | lan2 lan3 lan8 | optical4 lan1 optical3 One current issue with DSA is cross-chip FDB. If we add a static MAC address on lan3, only its parent switch 1 (the one in the middle) will be programmed. That is not correct in a cross-chip environment, because the DSA ports connecting to switch 1 of adjacent switch 0 (on the left) and switch 2 (on the right) must be programmed too. Without this patchset, a dump of the hardware FDB of switches 0, 1 and 2 after programming a MAC address on lan3 looks like this (*): # bridge fdb add 11:22:33:44:55:66 dev lan3 # cat /sys/kernel/debug/mv88e6xxx/sw*/atu/0 | grep -v FID 0 ff:ff:ff:ff:ff:ff MC_STATIC n 0 1 2 3 4 5 6 0 11:22:33:44:55:66 MC_STATIC_MGMT_PO n 0 - - - - - - 0 ff:ff:ff:ff:ff:ff MC_STATIC n 0 1 2 3 4 5 6 0 ff:ff:ff:ff:ff:ff MC_STATIC n 0 1 2 3 4 5 6 7 8 9 With this patchset applied, adjacent DSA ports get programmed too: # bridge fdb add 11:22:33:44:55:66 dev lan3 # cat /sys/kernel/debug/mv88e6xxx/sw*/atu/0 | grep -v FID 0 11:22:33:44:55:66 MC_STATIC_MGMT_PO n - - - - - 5 - 0 ff:ff:ff:ff:ff:ff MC_STATIC n 0 1 2 3 4 5 6 0 11:22:33:44:55:66 MC_STATIC_MGMT_PO n 0 - - - - - - 0 ff:ff:ff:ff:ff:ff MC_STATIC n 0 1 2 3 4 5 6 0 11:22:33:44:55:66 MC_STATIC_MGMT_PO n - - - - - - - - - 9 0 ff:ff:ff:ff:ff:ff MC_STATIC n 0 1 2 3 4 5 6 7 8 9 In order to do that, the first commit introduces a dsa_towards_port() helper which returns the local port of a switch which must be used to reach an arbitrary switch port (local or from an adjacent switch.) The second patch uses this helper to configure the port reaching the target port for every switches of the fabric. (*) a patch for squashed debugfs interface which applies on top of this patchset is available here: https://github.com/vivien/linux/commit/f8e6ba34c68a72d3bf42f4dea79abacb2e61a3cc.patch ==================== Signed-off-by: -
Vivien Didelot authored
When a MAC address is added to or removed from a switch port in the fabric, the target switch must program its port and adjacent switches must program their local DSA port used to reach the target switch. For this purpose, use the dsa_towards_port() helper to identify the local switch port which must be programmed. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
