- 25 Apr, 2017 9 commits
-
-
Mario Huettel authored
* Updated register defines to newest M_CAN version (v3.2.1). * Changed defines in the whole code. Signed-off-by:
Mario Huettel <mario.huettel@gmx.net> Reviewed-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Mario Huettel authored
The virtual address of the device was printed. I removed it because it leaks internal information. Signed-off-by:
-
Mario Huettel authored
FIFO water marks disabled because the driver doesn't handle water mark events. Signed-off-by:
-
Mario Huettel authored
* Disabled interrupt line 1. The driver didn't use it. Signed-off-by:
-
Stephane Grosjean authored
This patch adds the support of the PCAN-PCI Express FD boards made by PEAK-System, for computers using the PCI Express slot. The PCAN-PCI Express FD has one or two CAN FD channels, depending on the model. A galvanic isolation of the CAN ports protects the electronics of the card and the respective computer against disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated with ambient temperatures in a range of -40 to +85 °C. Such boards run an extented version of the CAN-FD IP running into USB CAN-FD interfaces from PEAK-System, so this patch adds several new commands and their corresponding data types to the PEAK CAN-FD common definitions header file too. Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
-
Stephane Grosjean authored
The CAN-FD IP from PEAK-System runs into several kinds of PC CAN-FD interfaces. Up to now, only the USB CAN-FD adapters were supported by the Kernel. In order to prepare the adding of some new non-USB CAN-FD interfaces, this patch moves - and rename - the IP definitions file from its private (usb) sub-directory into a - newly created - CAN specific one. Signed-off-by:
-
Stephane Grosjean authored
Fixes the usage of the const qualifier in the memory pointer arguments of the declared inline functions. By changing the line containing "const", this patch also changes the name of the arg into a more usual one. Signed-off-by:
-
Stephane Grosjean authored
This patch fixes the wrong usage of a specific USB data type into a common header file. This common header file is intended to define the common data types and values that define access to the PEAK-System CAN-FD IP, whatever the PC interface is. Signed-off-by:
-
David S. Miller authored
Doing a full 64-bit decomposition is really stupid especially for simple values like 0 and -1. But if we are going to optimize this, go all the way and try for all 2 and 3 instruction sequences not requiring a temporary register as well. First we do the easy cases where it's a zero or sign extended 32-bit number (sethi+or, sethi+xor, respectively). Then we try to find a range of set bits we can load simply then shift up into place, in various ways. Then we try negating the constant and see if we can do a simple sequence using that with a xor at the end. (f.e. the range of set bits can't be loaded simply, but for the negated value it can) The final optimized strategy involves 4 instructions sequences not needing a temporary register. Otherwise we sadly fully decompose using a temp.. Example, from ALU64_XOR_K: 0x0000ffffffff0000 ^ 0x0 = 0x0000ffffffff0000: 0000000000000000 <foo>: 0: 9d e3 bf 50 save %sp, -176, %sp 4: 01 00 00 00 nop 8: 90 10 00 18 mov %i0, %o0 c: 13 3f ff ff sethi %hi(0xfffffc00), %o1 10: 92 12 63 ff or %o1, 0x3ff, %o1 ! ffffffff <foo+0xffffffff> 14: 93 2a 70 10 sllx %o1, 0x10, %o1 18: 15 3f ff ff sethi %hi(0xfffffc00), %o2 1c: 94 12 a3 ff or %o2, 0x3ff, %o2 ! ffffffff <foo+0xffffffff> 20: 95 2a b0 10 sllx %o2, 0x10, %o2 24: 92 1a 60 00 xor %o1, 0, %o1 28: 12 e2 40 8a cxbe %o1, %o2, 38 <foo+0x38> 2c: 9a 10 20 02 mov 2, %o5 30: 10 60 00 03 b,pn %xcc, 3c <foo+0x3c> 34: 01 00 00 00 nop 38: 9a 10 20 01 mov 1, %o5 ! 1 <foo+0x1> 3c: 81 c7 e0 08 ret 40: 91 eb 40 00 restore %o5, %g0, %o0 Signed-off-by:David S. Miller <davem@davemloft.net>
-
- 24 Apr, 2017 31 commits
-
-
David S. Miller authored
cbcond combines a compare with a branch into a single instruction. The limitations are: 1) Only newer chips support it 2) For immediate compares we are limited to 5-bit signed immediate values 3) The branch displacement is limited to 10-bit signed 4) We cannot use it for JSET Also, cbcond (unlike all other sparc control transfers) lacks a delay slot. Currently we don't have a useful instruction we can push into the delay slot of normal branches. So using cbcond pretty much always increases code density, and is therefore a win. Signed-off-by: -
David S. Miller authored
Alexander Alemayhu says: ==================== Misc BPF cleanup while looking into making the Makefile in samples/bpf better handle O= I saw several warnings when running `make clean && make samples/bpf/`. This series reduces those warnings. ==================== Signed-off-by: -
Alexander Alemayhu authored
Fixes the following warning samples/bpf/test_lru_dist.c:28:0: warning: "offsetof" redefined #define offsetof(TYPE, MEMBER) ((size_t)&((TYPE *)0)->MEMBER) In file included from ./tools/lib/bpf/bpf.h:25:0, from samples/bpf/libbpf.h:5, from samples/bpf/test_lru_dist.c:24: /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:417:0: note: this is the location of the previous definition #define offsetof(TYPE, MEMBER) __builtin_offsetof (TYPE, MEMBER) Signed-off-by:Alexander Alemayhu <alexander@alemayhu.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Alexander Alemayhu authored
Fixes the following warning samples/bpf/cookie_uid_helper_example.c: At top level: samples/bpf/cookie_uid_helper_example.c:276:6: warning: no previous prototype for ‘finish’ [-Wmissing-prototypes] void finish(int ret) ^~~~~~ HOSTLD samples/bpf/per_socket_stats_example Signed-off-by: -
Alexander Alemayhu authored
I was initially going to remove '-Wno-address-of-packed-member' because I thought it was not supposed to be there but Daniel suggested using '-Wno-unknown-warning-option'. This silences several warnings similiar to the one below warning: unknown warning option '-Wno-address-of-packed-member' [-Wunknown-warning-option] 1 warning generated. clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h \ -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \ -Wno-compare-distinct-pointer-types \ -Wno-gnu-variable-sized-type-not-at-end \ -Wno-address-of-packed-member -Wno-tautological-compare \ -O2 -emit-llvm -c samples/bpf/xdp_tx_iptunnel_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/xdp_tx_iptunnel_kern.o $ clang --version clang version 3.9.1 (tags/RELEASE_391/final) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /usr/bin Signed-off-by: -
Daniel Borkmann authored
Now that also the last in-tree user of the xdp_adjust_head bit has been removed, we can remove the flag from struct bpf_prog altogether. This, at the same time, also makes sure that any future driver for XDP comes with bpf_xdp_adjust_head() support right away. A rejection based on this flag would also mean that tail calls couldn't be used with such driver as per c2002f98 ("bpf: fix checking xdp_adjust_head on tail calls") fix, thus lets not allow for it in the first place. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Pan Bian authored
Function pci_find_ext_capability() may return 0, which is an invalid address. In function qlcnic_sriov_virtid_fn(), its return value is used without validation. This may result in invalid memory access bugs. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Pan Bian authored
In function pc300_pci_init_one(), on the ioremap error path, function pc300_pci_remove_one() is called to free the allocated memory. However, the path is not terminated, and the freed memory will be used later, resulting in use-after-free bugs. This path fixes the bug. Signed-off-by:
-
Pan Bian authored
Function nlmsg_new() will return a NULL pointer if there is no enough memory, and its return value should be checked before it is used. However, in function tipc_nl_node_get_monitor(), the validation of the return value of function nlmsg_new() is missed. This patch fixes the bug. Signed-off-by:
-
Pan Bian authored
Function nla_nest_start() may return a NULL pointer on error. However, in function lwtunnel_fill_encap(), the return value of nla_nest_start() is not validated before it is used. This patch checks the return value of nla_nest_start() against NULL. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: DMA flags, adjust head and fixes This series takes advantage of Alex's DMA_ATTR_SKIP_CPU_SYNC to make XDP packet modifications "correct" from DMA API point of view. It also allows us to parse the metadata before we run XDP at no additional DMA sync cost. That way we can get rid of the metadata memcpy, and remove the last upstream user of bpf_prog->xdp_adjust_head. David's patch adds a way to read capabilities from the management firmware. There are also two net-next fixes. Patch 4 which fixes what seems to be a result of a botched rebase on my part. Patch 5 corrects locking when state of ethernet ports is being refreshed. v3: move the sync from alloc func to the actual give to hw func v2: sync rx buffers before giving them to the card (Alex) ==================== Signed-off-by: -
Jakub Kicinski authored
The code refreshing the eth port state was trying to update state of all ports of the card. Unfortunately to safely walk the port list we would have to hold the port lock, which we can't due to lock ordering constraints against rtnl. Make the per-port sync refresh and async refresh of all ports completely separate routines. Fixes: 172f638c ("nfp: add port state refresh") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
XDP headroom should not be included in free list buffer size. Fixes: 6fe0c3b4 ("nfp: add support for xdp_adjust_head()") Signed-off-by:
-
David Brunecz authored
Retrieve identifying information from the NSP. For now it only contains versions of firmware subcomponents. Signed-off-by:
David Brunecz <david.brunecz@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Calling memcpy to shift metadata out of the way for XDP to run seems like an overkill. The most common metadata contents are 8 bytes containing type and flow hash. Simply parse the metadata before we run XDP. Signed-off-by:
-
Jakub Kicinski authored
DMA unmap may destroy changes CPU made to the buffer. To make XDP run correctly on non-x86 platforms we should use the DMA_ATTR_SKIP_CPU_SYNC attribute. Thanks to using the attribute we can now push the sync operation to the common code path from XDP handler. A little bit of variable name reshuffling is required to bring the code back to readable state. Signed-off-by:
-
David S. Miller authored
Benjamin LaHaise says: ==================== flower: add MPLS matching support This patch series adds support for parsing MPLS flows in the flow dissector and the flower classifier. Each of the MPLS TTL, BOS, TC and Label fields can be used for matching. v2: incorporate style feedback, move #defines to linux/include/mpls.h Note: this omits Jiri's request to remove tabs between the type and field names in struct declarations. This would be inconsistent with numerous other struct definitions. ==================== Signed-off-by: -
Benjamin LaHaise authored
Add support to the tc flower classifier to match based on fields in MPLS labels (TTL, Bottom of Stack, TC field, Label). Signed-off-by:
Benjamin LaHaise <benjamin.lahaise@netronome.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Benjamin LaHaise authored
Add support for parsing MPLS flows to the flow dissector in preparation for adding MPLS match support to cls_flower. Signed-off-by:
-
David S. Miller authored
Wei Wang says: ==================== net/tcp_fastopen: Fix for various TFO firewall issues Currently there are still some firewall issues in the middlebox which make the middlebox drop packets silently for TFO sockets. This kind of issue is hard to be detected by the end client. This patch series tries to detect such issues in the kernel and disable TFO temporarily. More details about the issues and the fixes are included in the following patches. ==================== Signed-off-by: -
Wei Wang authored
Christoph Paasch from Apple found another firewall issue for TFO: After successful 3WHS using TFO, server and client starts to exchange data. Afterwards, a 10s idle time occurs on this connection. After that, firewall starts to drop every packet on this connection. The fix for this issue is to extend existing firewall blackhole detection logic in tcp_write_timeout() by removing the mss check. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Wei Wang authored
This counter records the number of times the firewall blackhole issue is detected and active TFO is disabled. Signed-off-by:
-
Wei Wang authored
Middlebox firewall issues can potentially cause server's data being blackholed after a successful 3WHS using TFO. Following are the related reports from Apple: https://www.nanog.org/sites/default/files/Paasch_Network_Support.pdf Slide 31 identifies an issue where the client ACK to the server's data sent during a TFO'd handshake is dropped. C ---> syn-data ---> S C <--- syn/ack ----- S C (accept & write) C <---- data ------- S C ----- ACK -> X S [retry and timeout] https://www.ietf.org/proceedings/94/slides/slides-94-tcpm-13.pdf Slide 5 shows a similar situation that the server's data gets dropped after 3WHS. C ---- syn-data ---> S C <--- syn/ack ----- S C ---- ack --------> S S (accept & write) C? X <- data ------ S [retry and timeout] This is the worst failure b/c the client can not detect such behavior to mitigate the situation (such as disabling TFO). Failing to proceed, the application (e.g., SSL library) may simply timeout and retry with TFO again, and the process repeats indefinitely. The proposed solution is to disable active TFO globally under the following circumstances: 1. client side TFO socket detects out of order FIN 2. client side TFO socket receives out of order RST We disable active side TFO globally for 1hr at first. Then if it happens again, we disable it for 2h, then 4h, 8h, ... And we reset the timeout to 1hr if a client side TFO sockets not opened on loopback has successfully received data segs from server. And we examine this condition during close(). The rational behind it is that when such firewall issue happens, application running on the client should eventually close the socket as it is not able to get the data it is expecting. Or application running on the server should close the socket as it is not able to receive any response from client. In both cases, out of order FIN or RST will get received on the client given that the firewall will not block them as no data are in those frames. And we want to disable active TFO globally as it helps if the middle box is very close to the client and most of the connections are likely to fail. Also, add a debug sysctl: tcp_fastopen_blackhole_detect_timeout_sec: the initial timeout to use when firewall blackhole issue happens. This can be set and read. When setting it to 0, it means to disable the active disable logic. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2017-04-22 Sparse and compiler warnings fixes from Stephen Hemminger. From Roi Dayan and Or Gerlitz, Add devlink and mlx5 support for controlling E-Switch encapsulation mode, this knob will enable HW support for applying encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading. ==================== Signed-off-by: -
David Ahern authored
systemd-sysctl is triggering a suspicious RCU usage message when net.ipv4.tcp_early_demux or net.ipv4.udp_early_demux is changed via a sysctl config file: [ 33.896184] =============================== [ 33.899558] [ ERR: suspicious RCU usage. ] [ 33.900624] 4.11.0-rc7+ #104 Not tainted [ 33.901698] ------------------------------- [ 33.903059] /home/dsa/kernel-2.git/net/ipv4/sysctl_net_ipv4.c:305 suspicious rcu_dereference_check() usage! [ 33.905724] other info that might help us debug this: [ 33.907656] rcu_scheduler_active = 2, debug_locks = 0 [ 33.909288] 1 lock held by systemd-sysctl/143: [ 33.910373] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff8123a370>] file_start_write+0x45/0x48 [ 33.912407] stack backtrace: [ 33.914018] CPU: 0 PID: 143 Comm: systemd-sysctl Not tainted 4.11.0-rc7+ #104 [ 33.915631] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 33.917870] Call Trace: [ 33.918431] dump_stack+0x81/0xb6 [ 33.919241] lockdep_rcu_suspicious+0x10f/0x118 [ 33.920263] proc_configure_early_demux+0x65/0x10a [ 33.921391] proc_udp_early_demux+0x3a/0x41 add rcu locking to proc_configure_early_demux. Fixes: dddb64bc ("net: Add sysctl to toggle early demux for tcp and udp") Signed-off-by:David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-04-22 Here are some more Bluetooth patches (and one 802.15.4 patch) in the bluetooth-next tree targeting the 4.12 kernel. Most of them are pure fixes. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err message and rejoin line. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Geliang Tang authored
Use offset_in_page() macro instead of open-coding. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Updates for net-next. Miscellaneous updates include passing DCBX RoCE VLAN priority to firmware, checking one more new firmware flag before allowing DCBX to run on the host, adding 100Gbps speed support, adding check to disallow speed settings on Multi-host NICs, and a minor fix for reporting VF attributes. ==================== Signed-off-by: -
Deepak Khungar authored
This change restricts the PF in multi-host mode from setting any port level PHY configuration. The settings are controlled by firmware in Multi-Host mode. Signed-off-by:
Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Check the additional flag in bnxt_hwrm_func_qcfg() before allowing DCBX to be done in host mode. Signed-off-by:
-
