- 31 Aug, 2007 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: clean up task_new_fair() sched: small schedstat fix sched: fix wait_start_fair condition in update_stats_wait_end() sched: call update_curr() in task_tick_fair() sched: make the scheduler converge to the ideal latency sched: fix sleeper bonus limit
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] Bump driver versions ata_piix: implement IOCFG bit18 quirk libata: implement BROKEN_HPA horkage and apply it to affected drives sata_promise: FastTrack TX4200 is a second-generation chip pata_marvell: Add more identifiers ata_piix: add Satellite U200 to broken suspend list ata: add ATA_MWDMA* and ATA_SWDMA* defines ata_piix: IDE mode SATA patch for Intel Tolapai libata-core: Allow translation setting to fail
-
Jeff Garzik authored
Bump the versions for drivers that were modified, but had not already had a version number bump. Signed-off-by:Jeff Garzik <jeff@garzik.org>
-
Christoph Lameter authored
Page migration currently does not check if the target of the move contains nodes that that are invalid (if root attempts to migrate pages) and may try to allocate from invalid nodes if these are specified leading to oopses. Return -EINVAL if an offline node is specified. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Gibson authored
For hugepage mappings, the file offset, like the address and size, needs to be aligned to the size of a hugepage. In commit 68589bc3, the check for this was moved into prepare_hugepage_range() along with the address and size checks. But since BenH's rework of the get_unmapped_area() paths leading up to commit 4b1d8929, prepare_hugepage_range() is only called for MAP_FIXED mappings, not for other mappings. This means we're no longer ever checking for an aligned offset - I've confirmed that mmap() will (apparently) succeed with a misaligned offset on both powerpc and i386 at least. This patch restores the check, removing it from prepare_hugepage_range() and putting it back into hugetlbfs_file_mmap(). I'm putting it there, rather than in the get_unmapped_area() path so it only needs to go in one place, than separately in the half-dozen or so arch-specific implementations of hugetlb_get_unmapped_area(). Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Cc: Adam Litke <agl@us.ibm.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jiri Slaby authored
MAINTAINERS, order NETERION alphabetically Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Shane Huang authored
We find that SB700 and SB800 use the same SMBus device ID as SB600, which is 0x4385, instead of the already submitted 0x4395. Besides removing the wrong SB700 device ID, add SB800 support to kernel, by renaming the PCI_DEVICE_ID_ATI_IXP600_SMBUS into PCI_DEVICE_ID_ATI_SBX00_SMBUS. Signed-off-by:
Shane Huang <shane.huang@amd.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Randy Dunlap authored
Drop the URL for DCO (URL is invalid). Also, point to SubmittingPatches for the current DCO. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Oleg Nesterov authored
Spotted by taoyue <yue.tao@windriver.com> and Jeremy Katz <jeremy.katz@windriver.com>. collect_signal: sigqueue_free: list_del_init(&first->list); if (!list_empty(&q->list)) { // not taken } q->flags &= ~SIGQUEUE_PREALLOC; __sigqueue_free(first); __sigqueue_free(q); Now, __sigqueue_free() is called twice on the same "struct sigqueue" with the obviously bad implications. In particular, this double free breaks the array_cache->avail logic, so the same sigqueue could be "allocated" twice, and the bug can manifest itself via the "impossible" BUG_ON(!SIGQUEUE_PREALLOC) in sigqueue_free/send_sigqueue. Hopefully this can explain these mysterious bug-reports, see http://marc.info/?t=118766926500003 http://marc.info/?t=118466273000005 Alexey Dobriyan reports this patch makes the difference for the testcase, but nobody has an access to the application which opened the problems originally. Also, this patch removes tasklist lock/unlock, ->siglock is enough. Signed-off-by:Oleg Nesterov <oleg@tv-sign.ru> Cc: taoyue <yue.tao@windriver.com> Cc: Jeremy Katz <jeremy.katz@windriver.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Acked-by:
Cedric Le Goater <clg@fr.ibm.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Signed-off-by:
-
Jarek Poplawski authored
Mariusz Kozlowski reported lockdep's warning: > ================================= > [ INFO: inconsistent lock state ] > 2.6.23-rc2-mm1 #7 > --------------------------------- > inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. > ifconfig/5492 [HC0[0]:SC0[0]:HE1:SE1] takes: > (&tp->lock){+...}, at: [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too] > {in-hardirq-W} state was registered at: > [<c0138eeb>] __lock_acquire+0x949/0x11ac > [<c01397e7>] lock_acquire+0x99/0xb2 > [<c0452ff3>] _spin_lock+0x35/0x42 > [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too] > [<c0147a5d>] handle_IRQ_event+0x28/0x59 > [<c01493ca>] handle_level_irq+0xad/0x10b > [<c0105a13>] do_IRQ+0x93/0xd0 > [<c010441e>] common_interrupt+0x2e/0x34 ... > other info that might help us debug this: > 1 lock held by ifconfig/5492: > #0: (rtnl_mutex){--..}, at: [<c0451778>] mutex_lock+0x1c/0x1f > > stack backtrace: ... > [<c0452ff3>] _spin_lock+0x35/0x42 > [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too] > [<c01480fd>] free_irq+0x11b/0x146 > [<de871d59>] rtl8139_close+0x8a/0x14a [8139too] > [<c03bde63>] dev_close+0x57/0x74 ... This shows that a driver's irq handler was running both in hard interrupt and process contexts with irqs enabled. The latter was done during free_irq() call and was possible only with CONFIG_DEBUG_SHIRQ enabled. This was fixed by another patch. But similar problem is possible with request_irq(): any locks taken from irq handler could be vulnerable - especially with soft interrupts. This patch fixes it by disabling local interrupts during handler's run. (It seems, disabling softirqs should be enough, but it needs more checking on possible races or other special cases). Reported-by:Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
Jarek Poplawski <jarkao2@o2.pl> Signed-off-by:
-
Ryusuke Konishi authored
This will avoid a possible fault in ecryptfs_sync_page(). In the function, eCryptfs calls sync_page() method of a lower filesystem without checking its existence. However, there are many filesystems that don't have this method including network filesystems such as NFS, AFS, and so forth. They may fail when an eCryptfs page is waiting for lock. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by:
Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Andrew Victor authored
Fix cut 'n paste bug in Atmel SPI driver. Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Acked-by:
David Brownell <david-b@pacbell.net> Acked-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
-
Ralf Baechle authored
This is triggered if PCI && !HOTPLUG. MODPOST vmlinux.o WARNING: vmlinux.o(.data+0xc910): Section mismatch: reference to .init.text:pci_ite887x_init (between 'pci_serial_quirks' and 'serial_pci_tbl') Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
The IOC3 is a multifunction device but not in sense of the PCI specification. Currently its ethernet and serial functionality are supported by two separate drivers authored and maintained by different people, so MAINTAINERS should reflect that. Cc: Patrick Gefre <pfg@sgi.com> Signed-off-by:
-
Rafael J. Wysocki authored
Dependencies of CONFIG_SUSPEND and CONFIG_HIBERNATION introduced by commit 296699de "Introduce CONFIG_SUSPEND for suspend-to-Ram and standby" are incorrect, as they don't cover the facts that (1) not all architectures support suspend and (2) SMP hibernation is only possible on X86 and PPC64 (if CONFIG_PPC64_SWSUSP is set). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Oleg Nesterov authored
Spotted by Marcin Kowalczyk <qrczak@knm.org.pl>. sys_setpgid(child) fails if the child was forked by sub-thread. Fix the "is it our child" check. The previous commit ee0acf90 was not complete. (this patch asks for the new same_thread_group() helper, but mainline doesn't have it yet). Signed-off-by:
Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> Tested-by:
"Marcin 'Qrczak' Kowalczyk" <qrczak@knm.org.pl> Signed-off-by:
-
Christoph Lameter authored
Do not BUG() if we cannot register a slab with sysfs. Just print an error. The only consequence of not registering is that the slab cache is not visible via /sys/slab. A BUG() may not be visible that early during boot and we have had multiple issues here already. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Atsushi Nemoto authored
Correct the name of the spi_txx9 driver (and their in-tree user) instead of MODULE_ALIAS workaround. This would be preferable in the long term. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Update various SPI drivers so they properly support - coldplug through "modprobe $(cat /sys/devices/.../modalias)" - hotplug through "modprobe $(MODALIAS)" The basic rule for platform, SPI, and (new style) I2C drivers is just to make sure that modprobing the driver name works. In this case, all the relevant drivers are platform drivers, and this patch either (a) Changes the driver name, if no in-tree code would break; this is simpler and thus preferable in the long term. (b) Adds MODULE_ALIAS directives, when in-tree platforms declare devices using the current driver name; less desirable. Most systems will link SPI controller drivers statically, but there's no point in being needlessly broken. Signed-off-by:
Andrei Konovalov <akonovalov@ru.mvista.com> Signed-off-by:
-
Jonathan Lim authored
taskstats.ac_exitcode is assigned to task_struct.exit_code in bacct_add_tsk() through the following kernel function calls: do_exit() taskstats_exit() fill_pid() bacct_add_tsk() The problem is that in do_exit(), task_struct.exit_code is set to 'code' only after taskstats_exit() has been called. So we need to move the assignment before taskstats_exit(). Signed-off-by:Jonathan Lim <jlim@sgi.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Ralf Baechle authored
We better select a font when the newport driver is a module or the user experience might suffer. Signed-off-by:
-
Jan Kara authored
Fix possible NULL pointer dereference when freeing blocks in case table of free space is used. Also fix handling of the case when we need to move extent from one block to another one to make space for indirect extent. BTW: Nobody seem to have ever used this code. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
If UDF superblock is incorrect, we can fail to find a table of free / allocated space and consequently Oops. Handle this situation more gracefully by ignoring the broken UDF partition. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
In migration fallback path, write_page() or lock_page() will be called. This causes sleep with holding rcu_read_lock(). For avoding that, just do rcu_lock if the page is Anon.(this is enough.) Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
-
Jeff Dike authored
Stop UML crashing when trying to dump a process core on x86_64. This is the minimal fix to stop the crash - more things are broken here, and patches are forthcoming. The immediate thing to do is define ELF_CORE_COPY_REGS and ELF_CORE_COPY_FPREGS. Defining ELF_CORE_COPY_FPREGS allows dump_fpu to go away. It is defined in terms of save_fp_registers, so that needs to be added. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Signed-off-by:
-
Jeff Dike authored
Fix a class of bugs in the UML linker scripts which caused section boundary variables to sometimes not line up with their sections. Signed-off-by:
-
Andrew Morton authored
Don't try to free memory which we didn't allocate. Acked-by:
-
Andrew Morton authored
This patch got appied twice. Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Tejun Heo authored
Some notebooks need bit18 of IOCFG to be cleared for the drive bay to work even though the bit is NOOP according to the datasheet. This patch implement IOCFG bit18 quirk and apply it to Clevo M570U. http://bugzilla.kernel.org/show_bug.cgi?id=8051Signed-off-by:
Tejun Heo <htejun@gmail.com> Cc: D. Angelis <dangelis@beta-cae.gr> Signed-off-by:
-
Tejun Heo authored
Some drives choke on READ_NATIVE_MAX_ADDRESS[_EXT]. Implement ATA_HORKAGE_BROKEN_HPA and apply it to affected drives. Signed-off-by:
-
Mikael Pettersson authored
This patch corrects sata_promise to classify FastTrack TX4200 (DID 3515/3519) as a second-generation chip. Promise's partial- source FT TX4200 driver confirms this classification. Treating it as a first-generation chip causes several problems: 1. Detection failures. This is a recent regression triggered by the hotplug-enabling changes in 2.6.23-rc1. 2. Various "failed to resume link for reset" warnings. This patch fixes <http://bugzilla.kernel.org/show_bug.cgi?id=8936>. Thanks to Stephen Ziemba for reporting the bug and for testing the fix. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Tested-by:
Stephen Ziemba <sziemba@ecn.purdue.edu> Signed-off-by:
-
Christoph Lameter authored
Some compilers (especially older gcc releases) may skip inlining sometimes which will lead to link failures. Force the inlining of keyfunctions in slub_def.h to avoid these issues. Signed-off-by:
Jan Dittmer <jdi@l4x.org> Signed-off-by:
-
Alan Cox authored
This replaces the patch which incorrectly removed the 6145 Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Tejun Heo authored
Satellite U200 also shares the problem. Add it to the broken suspend list. Original patch from John Schember. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix several bugs in MSI handling. [SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling.
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [PKTGEN]: Remove write-only variable. [NETFILTER]: xt_tcpudp: fix wrong struct in udp_checkentry [NET_SCHED] sch_prio.c: remove duplicate call of tc_classify() [BRIDGE]: Fix OOPS when bridging device without ethtool. [BRIDGE]: Packets leaking out of disabled/blocked ports. [TCP]: Allow minimum RTO to be configurable via routing metrics. SCTP: Fix to handle invalid parameter length correctly SCTP: Abort on COOKIE-ECHO if backlog is exceeded. SCTP: Correctly disable listening when backlog is 0. SCTP: Do not retransmit chunks that are newer then rtt. SCTP: Uncomfirmed transports can't become Inactive SCTP: Pick the correct port when binding to 0. SCTP: Use net_ratelimit to suppress error messages print too fast SCTP: Fix to encode PROTOCOL VIOLATION error cause correctly SCTP: Fix sctp_addto_chunk() to add pad with correct length SCTP: Assign stream sequence numbers to the entire message SCTP: properly clean up fragment and ordering queues during FWD-TSN. [PKTGEN]: Fix multiqueue oops. [BNX2]: Add write posting comment. [BNX2]: Use msleep().
-
Jason Gaston authored
Resend trying to remove 8-bit characters in the email. This patch adds the Intel Tolapai IDE mode SATA controller DID's. Signed-off-by:
Jason Gaston <jason.d.gaston@intel.com> Signed-off-by:
-
Alan Cox authored
On some early drives (pre ATA1) this feature is not supported. If it fails then we know the drive geometry is the hardware geometry and the one we tried to set anyway so just carry on. Signed-off-by:
-
