- 07 Apr, 2017 3 commits
-
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu fixes for 4.11 (part 1) Fix build of the board code for orion5x when some parts are configured as module. * tag 'mvebu-fixes-4.11-1' of git://git.infradead.org/linux-mvebu: ARM: orion5x: only call into phylib when available Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'sunxi-fixes-for-4.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 4.11, bis Two fixes for the recent A33 cpufreq support, and one to fix a missing register in the A64 USB PHY node. * tag 'sunxi-fixes-for-4.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: add pmu0 regs for USB PHY ARM: sun8i: a33: add operating-points-v2 property to all nodes ARM: sun8i: a33: remove highest OPP to fix CPU crashes Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.pengutronix.de/git/pza/linuxOlof Johansson authored
Reset controller fixes for v4.11 Fix devm_reset_controller_get_optional to return NULL for non-DT devices, if the RESET_CONTROLLER Kconfig option is enabled. This fixes probe failures of the 8250_dw driver on Intel platforms after commit acbdad8d ("serial: 8250_dw: simplify optional reset handling"). * tag 'reset-fixes-for-4.11-2' of git://git.pengutronix.de/git/pza/linux: reset: add exported __reset_control_get, return NULL if optional Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 06 Apr, 2017 1 commit
-
-
Icenowy Zheng authored
The USB PHY in A64 has a "pmu0" region, which controls the EHCI/OHCI controller pair that can be connected to the PHY0. Add the MMIO region for PHY node. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 04 Apr, 2017 1 commit
-
-
Philipp Zabel authored
Rename the internal __reset_control_get/put functions to __reset_control_get/put_internal and add an exported __reset_control_get equivalent to __of_reset_control_get that takes a struct device parameter. This avoids the confusing call to __of_reset_control_get in the non-DT case and fixes the devm_reset_control_get_optional function to return NULL if RESET_CONTROLLER is enabled but dev->of_node == NULL. Fixes: bb475230 ("reset: make optional functions really optional") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
-
- 30 Mar, 2017 1 commit
-
-
Arnd Bergmann authored
Board code cannot call mdiobus_register_board_info() when phylib or mdio_device is a loadable module: arch/arm/plat-orion/common.o: In function `orion_ge00_switch_init': :(.init.text+0x474): undefined reference to `mdiobus_register_board_info' I had a number of ideas for how this could be solved, but after the MDIO code got split out from PHYLIB it has gotten too hard, so I'm basically giving up, and only call the mdiobus_register_board_info() function if the MDIO layer is built-in to avoid the link error. This is similar to how we handle PHY registration on other ARM platforms. Fixes: 90eff909 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Fixes: 648ea013 ("net: phy: Allow pre-declaration of MDIO devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
- 24 Mar, 2017 2 commits
-
-
Arnd Bergmann authored
Merge tag 'arm-soc/for-4.11/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux into fixes Pull "Broadcom arm64 Device Tree fixes for 4.11" from Florian Fainelli: This pull request contains Broadcom ARM64-based SoCs Device Tree fixes for 4.11, please pull the following: - Jon adds missing "dma-coherent" property to the Northstar 2 DTS include file in order to fix both performance and cache problems for: PCIe, Ethernet, PDC/mailbox, SATA3 and SDHCI * tag 'arm-soc/for-4.11/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux: arm64: dts: NS2: Add dma-coherent to relevant DT entries
-
http://github.com/Broadcom/stblinuxArnd Bergmann authored
Pull "Broadcom arm Device Tree fixes for 4.11 (part 2)" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 4.11, please pull the following: - Jon fixes a reboot issue on most Northstar Plus platforms by adding the "open-source" property to the "gpio-restart" Device Tree nodes * tag 'arm-soc/for-4.11/devicetree-fixes-2' of http://github.com/Broadcom/stblinux: ARM: dts: NSP: GPIO reboot open-source
-
- 22 Mar, 2017 6 commits
-
-
Jon Mason authored
Cache related issues with DMA rings and performance issues related to caching are being caused by not properly setting the "dma-coherent" flag in the device tree entries. Adding it here to correct the issue. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Fixes: fd5e5dd5 ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2") Fixes: dddc3c9d ("arm64: dts: NS2: add AMAC ethernet support") Fixes: e7924914 ("arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver") Fixes: ac9aae00 ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2") Fixes: efc87767 ("arm64: dts: Add SDHCI DT node for NS2") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
Quentin Schulz authored
The OPP are declared as shared but no operating points are declared for cpu1, 2 and 3. Thus, the following error happens during the boot: cpu cpu1: dev_pm_opp_of_get_sharing_cpus: Couldn't find tcpu_dev node. This patch applies the operating points to each cpu of the A33. Fixes: 03749eb8 ("ARM: dts: sun8i: add opp-v2 table for A33") Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Olof Johansson authored
Merge tag 'at91-ab-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes Fixes for 4.11: - Fix USB host for sama5d2 - Fix cpuidle on sama5 * tag 'at91-ab-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: pm: cpu_idle: switch DDR to power-down mode Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node" Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.pengutronix.de/git/pza/linuxOlof Johansson authored
Reset controller fixes for v4.11 Fix optional reset_control_get_stubs to return NULL and remove warnings from reset_control_* stubs. This fixes commit bb475230 ("reset: make optional functions really optional"), which was merged in reset-for-4.11, and would cause consumer drivers depending on the new behaviour of optional resets to fail probing if RESET_CONTROLLER Kconfig option is disabled. * tag 'reset-fixes-for-4.11' of git://git.pengutronix.de/git/pza/linux: reset: fix optional reset_control_get stubs to return NULL Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'sunxi-fixes-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.11 A bunch of device tree fixes for various boards / SoCs. * tag 'sunxi-fixes-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings ARM: sun8i: Fix the mali clock rate Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.11: - A fix to reboot hang seen on imx6sx-udoo-neo board, by removing arm-supply and soc-supply and using LDO enabled mode. * tag 'imx-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx-udoo-neo: Fix reboot hang Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 21 Mar, 2017 2 commits
-
-
Philipp Zabel authored
When RESET_CONTROLLER is not enabled, the optional reset_control_get stubs should now also return NULL. Since it is now valid for reset_control_assert/deassert/reset/status/put to be called unconditionally, with NULL as an argument for optional resets, the stubs are not allowed to warn anymore. Fixes: bb475230 ("reset: make optional functions really optional") Reported-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
-
Quentin Schulz authored
The highest supported frequency (1.2GHz) requires to "overvolt" the CPU. However, some boards still do not have the cpu-supply DT property in the cpu DT node which means that the CPU will always run with the same input voltage but try to run at 1.2GHz frequency. This is the source of (experienced) CPU crashes. Remove the OPP which requires overvolting the CPU until all boards have a cpu-supply property. Fixes: 03749eb8 ("ARM: dts: sun8i: add opp-v2 table for A33") Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 20 Mar, 2017 2 commits
-
-
Icenowy Zheng authored
The bl_en_pin GPIO pinmux is configured as "gpio_in", which makes it conflicts with the real GPIO usage (out), and makes the backlight not usable. Drop the GPIO pinmux for it, thus this GPIO can be correctly used. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Florian Fainelli authored
The CPU port of the BCM53125 is configured with RGMII (no delays) but this should actually be RGMII with transmit delay (rgmii-txid) because STMMAC takes care of inserting the transmitter delay. This fixes occasional packet loss encountered. Fixes: d7b9eaff ("ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board") Reported-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 16 Mar, 2017 1 commit
-
-
Jon Mason authored
The libgpio code pre-sets the GPIO values for the gpio-reset in the device tree. This results in the device being reset during bringup. To prevent this pre-setting, use the "open-source" flag in the device tree. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Fixes: b1aaf88b ("ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file") Fixes: 10baed1c ("ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file") Fixes: 088e3148 ("ARM: dts: NSP: Add new DT file for bcm958522er") Fixes: e3227c12 ("ARM: dts: NSP: Add new DT file for bcm958525er") Fixes: 2f8bc002 ("ARM: dts: NSP: Add new DT file for bcm958622hr") Fixes: d454c376 ("ARM: dts: NSP: Add new DT file for bcm958623hr") Fixes: f27eacf2 ("ARM: dts: NSP: Add new DT file for bcm988312hr") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- 14 Mar, 2017 1 commit
-
-
Nicolas Ferre authored
On some DDR controllers, compatible with the sama5d3 one, the sequence to enter/exit/re-enter the self-refresh mode adds more constrains than what is currently written in the at91_idle driver. An actual access to the DDR chip is needed between exit and re-enter of this mode which is somehow difficult to implement. This sequence can completely hang the SoC. It is particularly experienced on parts which embed a L2 cache if the code run between IDLE calls fits in it... Moreover, as the intention is to enter and exit pretty rapidly from IDLE, the power-down mode is a good candidate. So now we use power-down instead of self-refresh. As we can simplify the code for sama5d3 compatible DDR controllers, we instantiate a new sama5d3_ddr_standby() function. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v4.1+ Fixes: 017b5522 ("ARM: at91: Add new binding for sama5d3-ddramc") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 13 Mar, 2017 3 commits
-
-
Olof Johansson authored
Merge tag 'omap-for-v4.11/fixes-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.11-rc cycle: - Fix smartreflex platform data regression where I accidentally removed legacy platform data still in use - Fix hypervisor mode for thumb2 kernel - Fix misplaced tpic2810 to move it to right bus - Enable INPUT_MOUSEDEV as a loadable module have mice working - Fix use of gpio-key,wakeup and use wakeup-source instead as this accidentally sneaked in during the merge window - Fix error handling for onenand to properly return error - Remove legacy gpmc-nand.c that's now dead code, this also removes dependency to the MTD tree for further driver changes - Fix device node reference count errors for omap3 and related to it also release device nodes after no longer needed * tag 'omap-for-v4.11/fixes-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Release device node after it is no longer needed. ARM: OMAP2+: Fix device node reference counts ARM: OMAP2+: Remove legacy gpmc-nand.c ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure ARM: dts: am335x-pcm953: Fix legacy wakeup source binding ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI ARM: OMAP5 / DRA7: Fix HYP mode boot for thumb2 build ARM: OMAP3: Fix smartreflex platform data regression Signed-off-by: Olof Johansson <olof@lixom.net>
-
http://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.11, please pull the following: - Jon fixes the UART output on the Broadcom bcm953012k reference board by using the proper clock reference instead of hard-coding the baud rate - Jon also fixes the memory map on the bcm953012k reference board by using the appropriate physical RAM start address - Jon finally fixes the interrupt type for the Cortex A9 global and local timers found in the BCM5301X SoC (Norsthar). * tag 'arm-soc/for-4.11/devicetree-fixes' of http://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags ARM: dts: BCM5301X: Fix memory start address ARM: dts: BCM5301X: Fix UARTs on bcm953012k Signed-off-by: Olof Johansson <olof@lixom.net>
-
Linus Walleij authored
This adds the AB8500 clocks to the device tree using the new bindings from the clk subsystem, making audio work again. Cc: Lee Jones <lee.jones@linaro.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 12 Mar, 2017 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: - four patches to get the new cputime code in shape for s390 - add the new statx system call - a few bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up statx system call KVM: s390: Fix guest migration for huge guests resulting in panic s390/ipl: always use load normal for CCW-type re-IPL s390/timex: micro optimization for tod_to_ns s390/cputime: provide archicture specific cputime_to_nsecs s390/cputime: reset all accounting fields on fork s390/cputime: remove last traces of cputime_t s390: fix in-kernel program checks s390/crypt: fix missing unlock in ctr_paes_crypt on error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - a fix for the kexec/purgatory regression which was introduced in the merge window via an innocent sparse fix. We could have reverted that commit, but on deeper inspection it turned out that the whole machinery is neither documented nor robust. So a proper cleanup was done instead - the fix for the TLB flush issue which was discovered recently - a simple typo fix for a reboot quirk * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tlb: Fix tlb flushing when lguest clears PGE kexec, x86/purgatory: Unbreak it and clean it up x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: - a workaround for a GIC erratum - a missing stub function for CONFIG_IRQDOMAIN=n - fixes for a couple of type inconsistencies * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Fix incorrect type of register size irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065 irqdomain: Add empty irq_domain_check_msi_remap irqchip/crossbar: Fix incorrect type of local variables
-
Daniel Borkmann authored
Fengguang reported random corruptions from various locations on x86-32 after commits d2852a22 ("arch: add ARCH_HAS_SET_MEMORY config") and 9d876e79 ("bpf: fix unlocking of jited image when module ronx not set") that uses the former. While x86-32 doesn't have a JIT like x86_64, the bpf_prog_lock_ro() and bpf_prog_unlock_ro() got enabled due to ARCH_HAS_SET_MEMORY, whereas Fengguang's test kernel doesn't have module support built in and therefore never had the DEBUG_SET_MODULE_RONX setting enabled. After investigating the crashes further, it turned out that using set_memory_ro() and set_memory_rw() didn't have the desired effect, for example, setting the pages as read-only on x86-32 would still let probe_kernel_write() succeed without error. This behavior would manifest itself in situations where the vmalloc'ed buffer was accessed prior to set_memory_*() such as in case of bpf_prog_alloc(). In cases where it wasn't, the page attribute changes seemed to have taken effect, leading to the conclusion that a TLB invalidate didn't happen. Moreover, it turned out that this issue reproduced with qemu in "-cpu kvm64" mode, but not for "-cpu host". When the issue occurs, change_page_attr_set_clr() did trigger a TLB flush as expected via __flush_tlb_all() through cpa_flush_range(), though. There are 3 variants for issuing a TLB flush: invpcid_flush_all() (depends on CPU feature bits X86_FEATURE_INVPCID, X86_FEATURE_PGE), cr4 based flush (depends on X86_FEATURE_PGE), and cr3 based flush. For "-cpu host" case in my setup, the flush used invpcid_flush_all() variant, whereas for "-cpu kvm64", the flush was cr4 based. Switching the kvm64 case to cr3 manually worked fine, and further investigating the cr4 one turned out that X86_CR4_PGE bit was not set in cr4 register, meaning the __native_flush_tlb_global_irq_disabled() wrote cr4 twice with the same value instead of clearing X86_CR4_PGE in the first write to trigger the flush. It turned out that X86_CR4_PGE was cleared from cr4 during init from lguest_arch_host_init() via adjust_pge(). The X86_FEATURE_PGE bit is also cleared from there due to concerns of using PGE in guest kernel that can lead to hard to trace bugs (see bff672e6 ("lguest: documentation V: Host") in init()). The CPU feature bits are cleared in dynamic boot_cpu_data, but they never propagated to __flush_tlb_all() as it uses static_cpu_has() instead of boot_cpu_has() for testing which variant of TLB flushing to use, meaning they still used the old setting of the host kernel. Clearing via setup_clear_cpu_cap(X86_FEATURE_PGE) so this would propagate to static_cpu_has() checks is too late at this point as sections have been patched already, so for now, it seems reasonable to switch back to boot_cpu_has(X86_FEATURE_PGE) as it was prior to commit c109bf95 ("x86/cpufeature: Remove cpu_has_pge"). This lets the TLB flush trigger via cr3 as originally intended, properly makes the new page attributes visible and thus fixes the crashes seen by Fengguang. Fixes: c109bf95 ("x86/cpufeature: Remove cpu_has_pge") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: bp@suse.de Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: lkp@01.org Cc: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernrl.org/r/20170301125426.l4nf65rx4wahohyl@wfg-t540p.sh.intel.com Link: http://lkml.kernel.org/r/25c41ad9eca164be4db9ad84f768965b7eb19d9e.1489191673.git.daniel@iogearbox.netSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
- 11 Mar, 2017 8 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "ARM updates from Marc Zyngier: - vgic updates: - Honour disabling the ITS - Don't deadlock when deactivating own interrupts via MMIO - Correctly expose the lact of IRQ/FIQ bypass on GICv3 - I/O virtualization: - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many PCIe devices - General bug fixes: - Gracefully handle exception generated with syndroms that the host doesn't understand - Properly invalidate TLBs on VHE systems x86: - improvements in emulation of VMCLEAR, VMX MSR bitmaps, and VCPU reset * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: do not warn when MSR bitmap address is not backed KVM: arm64: Increase number of user memslots to 512 KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unused KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64 KVM: Add documentation for KVM_CAP_NR_MEMSLOTS KVM: arm/arm64: VGIC: Fix command handling while ITS being disabled arm64: KVM: Survive unknown traps from guests arm: KVM: Survive unknown traps from guests KVM: arm/arm64: Let vcpu thread modify its own active state KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset kvm: nVMX: VMCLEAR should not cause the vCPU to shut down KVM: arm/arm64: vgic-v3: Don't pretend to support IRQ/FIQ bypass arm64: KVM: VHE: Clear HCR_TGE when invalidating guest TLBs
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds authored
Pull extable.h fix from Paul Gortmaker: "Fixup for arch/score after extable.h introduction. It seems that Guenter is the only one on the planet doing builds for arch/score -- we don't have compile coverage for it in linux-next or in the kbuild-bot either. Guenter couldn't even recall where he got his toolchain, but was kind enough to share it with me so I could validate this change and also add arch/score to my build coverage. I sat on this a bit in case there was any other fallout in other arch dirs, but since this still seems to be the only one, I might as well send it on its way" * tag 'extable-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: score: Fix implicit includes now failing build after extable change
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull random updates from Ted Ts'o: "Change get_random_{int,log} to use the CRNG used by /dev/urandom and getrandom(2). It's faster and arguably more secure than cut-down MD5 that we had been using. Also do some code cleanup" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: move random_min_urandom_seed into CONFIG_SYSCTL ifdef block random: convert get_random_int/long into get_random_u32/u64 random: use chacha20 for get_random_int/long random: fix comment for unused random_min_urandom_seed random: remove variable limit random: remove stale urandom_init_wait random: remove stale maybe_reseed_primary_crng
-
Guenter Roeck authored
After changing from module.h to extable.h, score builds fail with: arch/score/kernel/traps.c: In function 'do_ri': arch/score/kernel/traps.c:248:4: error: implicit declaration of function 'user_disable_single_step' arch/score/mm/extable.c: In function 'fixup_exception': arch/score/mm/extable.c:32:38: error: dereferencing pointer to incomplete type arch/score/mm/extable.c:34:24: error: dereferencing pointer to incomplete type because extable.h doesn't drag in the same amount of headers as the module.h did. Add in the headers which were implicitly expected. Fixes: 90858794 ("module.h: remove extable.h include now users have migrated") Signed-off-by: Guenter Roeck <linux@roeck-us.net> [PG: tweak commit log; refresh for sched header refactoring.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes frpm Greg KH: "Here are two bugfixes for tty stuff for 4.11-rc2. One of them resolves the pretty bad bug in the n_hdlc code that Alexander Popov found and fixed and has been reported everywhere. The other just fixes a samsung serial driver issue when DMA fails on some systems. Both have been in linux-next with no reported issues" * tag 'tty-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: samsung: Continue to work if DMA request fails tty: n_hdlc: get rid of racy n_hdlc.tbuf
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are two small build warning fixes for some staging drivers that Arnd has found on his valiant quest to get the kernel to build properly with no warnings. Both of these have been in linux-next this week and resolve the reported issues" * tag 'staging-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: octeon: remove unused variable staging/vc04_services: add CONFIG_OF dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here is a number of different USB fixes for 4.11-rc2. Seems like there were a lot of unresolved issues that people have been finding for this subsystem, and a bunch of good security auditing happening as well from Johan Hovold. There's the usual batch of gadget driver fixes and xhci issues resolved as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers usb: host: xhci-dbg: HCIVERSION should be a binary number usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct usb: xhci-mtk: check hcc_params after adding primary hcd USB: serial: digi_acceleport: fix OOB-event processing MAINTAINERS: usb251xb: remove reference inexistent file doc: dt-bindings: usb251xb: mark reg as required usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time usb: usb251xb: remove max_{power,current}_{sp,bp} properties usb-storage: Add ignore-residue quirk for Initio INIC-3619 USB: iowarrior: fix NULL-deref in write USB: iowarrior: fix NULL-deref at probe usb: phy: isp1301: Add OF device ID table usb: ohci-at91: Do not drop unhandled USB suspend control requests USB: serial: safe_serial: fix information leak in completion handler USB: serial: io_ti: fix information leak in completion handler USB: serial: omninet: drop open callback USB: serial: omninet: fix reference leaks at open USB: serial: io_ti: fix NULL-deref in interrupt callback usb: dwc3: gadget: make to increment req->remaining in all cases ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl fixes from Linus Walleij: "Two smaller pin control fixes for the v4.11 series: - Add a get_direction() function to the qcom driver - Fix two pin names in the uniphier driver" * tag 'pinctrl-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: uniphier: change pin names of aio/xirq for LD11 pinctrl: qcom: add get_direction function
-
- 10 Mar, 2017 4 commits
-
-
Thomas Gleixner authored
The purgatory code defines global variables which are referenced via a symbol lookup in the kexec code (core and arch). A recent commit addressing sparse warnings made these static and thereby broke kexec_file. Why did this happen? Simply because the whole machinery is undocumented and lacks any form of forward declarations. The variable names are unspecific and lack a prefix, so adding forward declarations creates shadow variables in the core code. Aside of that the code relies on magic constants and duplicate struct definitions with no way to ensure that these things stay in sync. The section placement of the purgatory variables happened by chance and not by design. Unbreak kexec and cleanup the mess: - Add proper forward declarations and document the usage - Use common struct definition - Use the proper common defines instead of magic constants - Add a purgatory_ prefix to have a proper name space - Use ARRAY_SIZE() instead of a homebrewn reimplementation - Add proper sections to the purgatory variables [ From Mike ] Fixes: 72042a8c ("x86/purgatory: Make functions and variables static") Reported-by: Mike Galbraith <<efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Tobin C. Harding" <me@tobin.cc> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanosSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: - a fix for the recently discovered misdirected requests bug present in jewel and later on the server side and all stable kernels - a fixup for -rc1 CRUSH changes - two usability enhancements: osd_request_timeout option and supported_features bus attribute. * tag 'ceph-for-4.11-rc2' of git://github.com/ceph/ceph-client: libceph: osd_request_timeout option rbd: supported_features bus attribute libceph: don't set weight to IN when OSD is destroyed libceph: fix crush_decode() for older maps
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Here are some driver bugfixes from I2C. Unusual this time are the two reverts. One because I accidently picked a patch from the list which I should have pulled from my co-maintainer instead ("missing of_node_put"). And one which I wrongly assumed to be an easy fix but it turned out already that it needs more iterations ("copy device properties")" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: copy device properties when using i2c_register_board_info()" Revert "i2c: add missing of_node_put in i2c_mux_del_adapters" i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not set i2c: designware: add reset interface i2c: meson: fix wrong variable usage in meson_i2c_put_data i2c: copy device properties when using i2c_register_board_info() i2c: m65xx: drop superfluous quirk structure i2c: brcmstb: Fix START and STOP conditions i2c: add missing of_node_put in i2c_mux_del_adapters i2c: riic: fix restart condition i2c: add missing of_node_put in i2c_mux_del_adapters
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Intel, amd and mxsfb fixes. These are the drm fixes I've collected for rc2. Mostly i915 GVT only fixes, along with a single EDID fix, some mxsfb fixes and a few minor amd fixes" * tag 'drm-fixes-for-4.11-rc2' of git://people.freedesktop.org/~airlied/linux: (38 commits) drm: mxsfb: Implement drm_panel handling drm: mxsfb_crtc: Fix the framebuffer misplacement drm: mxsfb: Fix crash when provided invalid DT bindings drm: mxsfb: fix pixel clock polarity drm: mxsfb: use bus_format to determine LCD bus width drm/amdgpu: bump driver version for some new features drm/amdgpu: validate paramaters in the gem ioctl drm/amd/amdgpu: fix console deadlock if late init failed drm/i915/gvt: change some gvt_err to gvt_dbg_cmd drm/i915/gvt: protect RO and Rsvd bits of virtual vgpu configuration space drm/i915/gvt: handle workload lifecycle properly drm/edid: Add EDID_QUIRK_FORCE_8BPC quirk for Rotel RSX-1058 drm/i915/gvt: fix an error for F_RO flag drm/i915/gvt: use pfn_valid for better checking drm/i915/gvt: set SFUSE_STRAP properly for vitual monitor detection drm/i915/gvt: fix an error for one register drm/i915/gvt: add more registers into handlers list drm/i915/gvt: have more registers with F_CMD_ACCESS flags set drm/i915/gvt: add some new MMIOs to cmd_access white list drm/i915/gvt: fix pcode mailbox write emulation of BDW ...
-