Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 Optimise attribute revalidation when hardlinking. Add post-op attributes
 for the directory and the original inode.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 "Optional" means that the close call will not fail if the getattr
 at the end of the compound fails.
 If it does succeed, try to refresh inode attributes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 Only force a getattr in nfs_file_flush() if the attribute
 cache is stale.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 Since the directory attributes change every time we CREATE a file,
 we might as well pick up the new directory attributes in the same
 compound.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 nfs_lookup() used to consult a lookup cache before trying an actual wire
 lookup operation.  The lookup cache would be invalid, of course, if the
 parent directory's mtime had changed, so nfs_lookup performed an inode
 revalidation on the parent.

 Since nfs_lookup() doesn't use a cache anymore, the revalidation is no
 longer necessary.  There are cases where it will generate a lot of
 unnecessary GETATTR traffic.

 See http://bugzilla.linux-nfs.org/show_bug.cgi?id=9

 Test-plan:
 Use lndir and "rm -rf" and watch for excess GETATTR traffic or application
 level errors.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 Since we almost always call nfs_end_data_update() after we called
 nfs_refresh_inode(), we now end up marking the inode metadata
 as needing revalidation immediately after having updated it.

 This patch rearranges things so that we mark the inode as needing
 revalidation _before_ we call nfs_refresh_inode() on those operations
 that need it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 Allow nfs_refresh_inode() also to update attributes on the inode if the
 RPC call was sent after the last call to nfs_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This reverts 747c5534 commit.

This just makes sure that a thread's expiry times can't get reset after
it clears them in do_exit.

This is what allowed us to re-introduce the stricter BUG_ON() check in
a362f463.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This reverts commit 3de463c7.

Roland has another patch that allows us to leave the BUG_ON() in place
by just making sure that the condition it tests for really is always
true.

That goes in next.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There's a silly off-by-one error in the code that updates the expiration
of posix CPU timers, causing them to not be properly updated when they
hit exactly on their expiration time (which should be the normal case).

This causes them to then fire immediately again, and only _then_ get
properly updated.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Pointed out by Oleg Nesterov, who has been walking over the code
forwards and backwards.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I've seen similar failure on alpha.

Obviously, someone forgot to convert sg->handle stuff for
PCI gart case.
Signed-off-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Convert nanoseconds to microseconds correctly.

Spotted by Steve Dickson <SteveD@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

fsck_hfs reveals lots of temporary files accumulating in the hidden
directory "\000\000\000HFS+ Private Data".  According to the HFS+
documentation these are files which are unlinked while in use.  However,
there may be a bug in the Linux hfsplus implementation which causes this to
happen even when the files are not in use.  It looks like the "opencnt"
field is never initialized as (I think) it should be in hfsplus_read_inode.
 This means that a file can appear to be still in use when in fact it has
been closed.  This patch seems to fix it for me.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Although this message is having the intended effect of causing wireless
driver maintainers to upgrade their code, I never should have merged this
patch in its present form.  Leading to tons of bug reports and unhappy
users.

Some wireless apps poll for statistics regularly, which leads to a printk()
every single time they ask for stats.  That's a little bit _too_ much of a
reminder that the driver is using an old API.

Change this to printing out the message once, per kernel boot.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

With CONFIG_SMP=n:

*** Warning: "cpu_online_map" [drivers/firmware/dcdbas.ko] undefined!

due to set_cpus_allowed().
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The mpic interrupt controller driver (used on G5 and early pSeries among
others) has a bug where it doesn't get the right virtual address for the
timer registers.  It causes the driver to poke at the MMIO space of
whatever has been mapped just next to it (ouch !) when initializing and
causes boot failures on some IBM machines.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The NUMA counters in struct per_cpu_pageset (linux/mmzone.h) are never
cleared today.  This works ok for CPU 0 on NUMA machines because
boot_pageset[] is already zero, but for other CPU:s this results in
uninitialized counters.
Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There are still a couple of cases where md threads (the resync/recovery
thread) is not interruptible since the change to use kthreads.  All places
there it tests "signal_pending", it should also test kthread_should_stop,
as with this patch.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Patch from Ian Campbell

Sparse complains about the definition of generic_fls in asm-arm/bitops.h:
  CHECK   /home/icampbell/devel/kernel/2.6/arch/arm/mach-pxa/viper.c
include2/asm/bitops.h:350:34: error: marked inline, but without a definition

The definition is unnecessary since linux/bitops.h defines generic_fls before including asm/bitops.h and asm/bitops.h should not be included directly. There are still some places where asm/bitops.h is directly included, but I think that code should be fixed. I was a little wary of the patch for this reason but lubbock, mainstone and assabet all build OK and so do my in house boards...

ARM is the only arch with the generic_fls prototype in this way.
Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When reserving an PCI quirk, note that in the kernel bootup messages.

Also, parse the strange PIIX4 device resources - they should get their
own PCI resource quirks, but for now just print out what it finds to
verify that the code does the right thing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: Yan Zheng <yanzheng@21cn.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

If qla2x00_probe_one()'s call to qla2x00_iospace_config() fails, we call
qla2x00_free_device() to clean up.  But because ha->dpc_pid hasn't been set
yet, qla2x00_free_device() tries to stop a kernel thread which hasn't started
yet.  It does wait_for_completion() against an uninitialised completion struct
and the kernel hangs up.

Fix it by initialising ha->dpc_pid a bit earlier.

Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

My alpha build is exploding because asm/atomic.h now needs smb_mb(), which is
over in the (not included) system.h.

I fear what will happen if I include system.h into atomic.h, so let's put the
barriers into their own header file.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>