- 27 Feb, 2019 40 commits
-
-
Gao Xiang authored
commit 948bbdb1 upstream. Just like other generic locks, insert a full barrier in case of memory reorder. Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gao Xiang authored
commit 73f5c66d upstream. There are two minor issues in the current freeze interface: 1) Freeze interfaces have not related with CONFIG_DEBUG_SPINLOCK, therefore fix the incorrect conditions; 2) For SMP platforms, it should also disable preemption before doing atomic_cmpxchg in case that some high priority tasks preempt between atomic_cmpxchg and disable_preempt, then spin on the locked refcount later. Reviewed-by:
-
Gao Xiang authored
commit df134b8d upstream. It's better to use atomic_cond_read_relaxed, which is implemented in hardware instructions to monitor a variable changes currently for ARM64, instead of open-coded busy waiting. Reviewed-by:
-
Gao Xiang authored
commit e9c89246 upstream. There is actually no need at all to d_rehash() for the root dentry as Al pointed out, fix it. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Gao Xiang authored
commit e5e3abba upstream. Multiref support means that a compressed page could have more than one reference, which is designed for on-disk data deduplication. However, mkfs doesn't support this mode at this moment, and the kernel implementation is also broken. Let's drop multiref support. If it is fully implemented in the future, it can be reverted later. Signed-off-by:
-
Chen Gong authored
commit 9141b60c upstream. This patch replace BUG_ON with DBG_BUGON in data.c, and add necessary error handler. Signed-off-by:
Chen Gong <gongchen4@huawei.com> Reviewed-by:
-
Gao Xiang authored
commit 1e05ff36 upstream. This patch completes error handing code of z_erofs_do_read_page. PG_error will be set when some read error happens, therefore z_erofs_onlinepage_endio will unlock this page without setting PG_uptodate. Reviewed-by:
Chao Yu <yucxhao0@huawei.com> Signed-off-by:
-
Gao Xiang authored
commit 0734ffbf upstream. As described in Kconfig, the last compressed pack should be cached for further reading for either `EROFS_FS_ZIP_CACHE_UNIPOLAR' or `EROFS_FS_ZIP_CACHE_BIPOLAR' by design. However, there is a bug in z_erofs_do_read_page, it will switch `initial' to `false' at the very beginning before it decides to cache the last compressed pack. caching strategy should work properly after appling this patch. Reviewed-by:
-
Willem de Bruijn authored
commit 9e8db591 upstream. GSO packets with vnet_hdr must conform to a small set of gso_types. The below commit uses flow dissection to drop packets that do not. But it has false positives when the skb is not fully initialized. Dissection needs skb->protocol and skb->network_header. Infer skb->protocol from gso_type as the two must agree. SKB_GSO_UDP can use both ipv4 and ipv6, so try both. Exclude callers for which network header offset is not known. Fixes: d5be7f63 ("net: validate untrusted gso packets without csum offload") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Willem de Bruijn authored
commit d5be7f63 upstream. Syzkaller again found a path to a kernel crash through bad gso input. By building an excessively large packet to cause an skb field to wrap. If VIRTIO_NET_HDR_F_NEEDS_CSUM was set this would have been dropped in skb_partial_csum_set. GSO packets that do not set checksum offload are suspicious and rare. Most callers of virtio_net_hdr_to_skb already pass them to skb_probe_transport_header. Move that test forward, change it to detect parse failure and drop packets on failure as those cleary are not one of the legitimate VIRTIO_NET_HDR_GSO types. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Yu Zhang authored
commit 511da98d upstream. Previously, 'commit 372fddf7 ("x86/mm: Introduce the 'no5lvl' kernel parameter")' cleared X86_FEATURE_LA57 in boot_cpu_data, if Linux chooses to not run in 5-level paging mode. Yet boot_cpu_data is queried by do_cpuid_ent() as the host capability later when creating vcpus, and Qemu will not be able to detect this feature and create VMs with LA57 feature. As discussed earlier, VMs can still benefit from extended linear address width, e.g. to enhance features like ASLR. So we would like to fix this, by return the true hardware capability when Qemu queries. Signed-off-by:
Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Felix Fietkau authored
commit 51d0af22 upstream. Forwarded packets enter the tx path through ieee80211_add_pending_skb, which skips the ieee80211_skb_resize call. Fixes WARN_ON in ccmp_encrypt_skb and resulting packet loss. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Leo (Hanghong) Ma authored
commit d2f0b53b upstream. [Why] drm_dp_mst_topology_mgr_suspend() is added into the new reboot sequence, which disables the UP request at the beginning. Therefore sideband messages are blocked. [How] Finish MST sideband message transaction before UP request is suppressed. Signed-off-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Chris Wilson authored
commit d179b88d upstream. If we skipped all the connectors that were not part of a tile, we would leave conn_seq=0 and conn_configured=0, convincing ourselves that we had stagnated in our configuration attempts. Avoid this situation by starting conn_seq=ALL_CONNECTORS, and repeating until we find no more connectors to configure. Fixes: 754a7659 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation") Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 450d007d upstream. On HP ProBook 4540s, if PM-runtime is enabled in the radeon driver and the direct-complete optimization is used for the radeon device during system-wide suspend, the system doesn't resume. Preventing direct-complete from being used with the radeon device by setting the DPM_FLAG_NEVER_SKIP driver flag for it makes the problem go away, which indicates that direct-complete is not safe for the radeon driver in general and should not be used with it (at least for now). This fixes a regression introduced by commit c62ec461 ("PM / core: Fix direct_complete handling for devices with no callbacks") which allowed direct-complete to be applied to devices without PM callbacks (again) which in turn unlocked direct-complete for radeon on HP ProBook 4540s. Fixes: c62ec461 ("PM / core: Fix direct_complete handling for devices with no callbacks") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201519Reported-by:
Ярослав Семченко <ukrkyi@gmail.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Alex Deucher authored
commit d3315853 upstream. Based on a similar patch from Rafael for radeon. When using ATPX to control dGPU power, the state is not retained across suspend and resume cycles by default. This can probably be loosened for Hybrid Graphics (_PR3) laptops where I think the state is properly retained. Fixes: c62ec461 ("PM / core: Fix direct_complete handling for devices with no callbacks") Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
-
Alexey Brodkin authored
commit b6835ea7 upstream. The default value of ARCH_SLAB_MINALIGN in "include/linux/slab.h" is "__alignof__(unsigned long long)" which for ARC unexpectedly turns out to be 4. This is not a compiler bug, but as defined by ARC ABI [1] Thus slab allocator would allocate a struct which is 32-bit aligned, which is generally OK even if struct has long long members. There was however potetial problem when it had any atomic64_t which use LLOCKD/SCONDD instructions which are required by ISA to take 64-bit addresses. This is the problem we ran into [ 4.015732] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.167881] Misaligned Access [ 4.172356] Path: /bin/busybox.nosuid [ 4.176004] CPU: 2 PID: 171 Comm: rm Not tainted 4.19.14-yocto-standard #1 [ 4.182851] [ 4.182851] [ECR ]: 0x000d0000 => Check Programmer's Manual [ 4.190061] [EFA ]: 0xbeaec3fc [ 4.190061] [BLINK ]: ext4_delete_entry+0x210/0x234 [ 4.190061] [ERET ]: ext4_delete_entry+0x13e/0x234 [ 4.202985] [STAT32]: 0x80080002 : IE K [ 4.207236] BTA: 0x9009329c SP: 0xbe5b1ec4 FP: 0x00000000 [ 4.212790] LPS: 0x9074b118 LPE: 0x9074b120 LPC: 0x00000000 [ 4.218348] r00: 0x00000040 r01: 0x00000021 r02: 0x00000001 ... ... [ 4.270510] Stack Trace: [ 4.274510] ext4_delete_entry+0x13e/0x234 [ 4.278695] ext4_rmdir+0xe0/0x238 [ 4.282187] vfs_rmdir+0x50/0xf0 [ 4.285492] do_rmdir+0x9e/0x154 [ 4.288802] EV_Trap+0x110/0x114 The fix is to make sure slab allocations are 64-bit aligned. Do note that atomic64_t is __attribute__((aligned(8)) which means gcc does generate 64-bit aligned references, relative to beginning of container struct. However the issue is if the container itself is not 64-bit aligned, atomic64_t ends up unaligned which is what this patch ensures. [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/wiki/files/ARCv2_ABI.pdfSigned-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> # 4.8+ Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog, added dependency on LL64+LLSC] Signed-off-by:
-
Eugeniy Paltsev authored
commit a66f2e57 upstream. Handle U-boot arguments paranoidly: * don't allow to pass unknown tag. * try to use external device tree blob only if corresponding tag (TAG_DTB) is set. * don't check uboot_tag if kernel build with no ARC_UBOOT_SUPPORT. NOTE: If U-boot args are invalid we skip them and try to use embedded device tree blob. We can't panic on invalid U-boot args as we really pass invalid args due to bug in U-boot code. This happens if we don't provide external DTB to U-boot and don't set 'bootargs' U-boot environment variable (which is default case at least for HSDK board) In that case we will pass {r0 = 1 (bootargs in r2); r1 = 0; r2 = 0;} to linux which is invalid. While I'm at it refactor U-boot arguments handling code. Cc: stable@vger.kernel.org Tested-by:
Corentin LABBE <clabbe@baylibre.com> Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Eugeniy Paltsev authored
commit 252f6e8e upstream. It is currently done in arc_init_IRQ() which might be too late considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned memory accesses by default Cc: stable@vger.kernel.org #4.4+ Signed-off-by:
-
Dmitry V. Levin authored
commit b7dc5a07 upstream. Commit 910cd32e ("parisc: Fix and enable seccomp filter support") introduced a regression in ptrace-based syscall tampering: when tracer changes syscall number to -1, the kernel fails to initialize %r28 with -ENOSYS and subsequently fails to return the error code of the failed syscall to userspace. This erroneous behaviour could be observed with a simple strace syscall fault injection command which is expected to print something like this: $ strace -a0 -ewrite -einject=write:error=enospc echo hello write(1, "hello\n", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "echo: ", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "write error", 11) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "\n", 1) = -1 ENOSPC (No space left on device) (INJECTED) +++ exited with 1 +++ After commit 910cd32e it loops printing something like this instead: write(1, "hello\n", 6../strace: Failed to tamper with process 12345: unexpectedly got no error (return value 0, error 0) ) = 0 (INJECTED) This bug was found by strace test suite. Fixes: 910cd32e ("parisc: Fix and enable seccomp filter support") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Tested-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Eric Biggers authored
commit ede0fa98 upstream. syzbot hit the 'BUG_ON(index_key->desc_len == 0);' in __key_link_begin() called from construct_alloc_key() during sys_request_key(), because the length of the key description was never calculated. The problem is that we rely on ->desc_len being initialized by search_process_keyrings(), specifically by search_nested_keyrings(). But, if the process isn't subscribed to any keyrings that never happens. Fix it by always initializing keyring_index_key::desc_len as soon as the description is set, like we already do in some places. The following program reproduces the BUG_ON() when it's run as root and no session keyring has been installed. If it doesn't work, try removing pam_keyinit.so from /etc/pam.d/login and rebooting. #include <stdlib.h> #include <unistd.h> #include <keyutils.h> int main(void) { int id = add_key("keyring", "syz", NULL, 0, KEY_SPEC_USER_KEYRING); keyctl_setperm(id, KEY_OTH_WRITE); setreuid(5000, 5000); request_key("user", "desc", "", id); } Reported-by: syzbot+ec24e95ea483de0a24da@syzkaller.appspotmail.com Fixes: b2a4df20 ("KEYS: Expand the capacity of a keyring") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Eric Biggers authored
commit cc1780fc upstream. Align the payload of "user" and "logon" keys so that users of the keyrings service can access it as a struct that requires more than 2-byte alignment. fscrypt currently does this which results in the read of fscrypt_key::size being misaligned as it needs 4-byte alignment. Align to __alignof__(u64) rather than __alignof__(long) since in the future it's conceivable that people would use structs beginning with u64, which on some platforms would require more than 'long' alignment. Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 2aa349f6 ("[PATCH] Keys: Export user-defined keyring operations") Fixes: 88bd6ccd ("ext4 crypto: add encryption key management facilities") Cc: stable@vger.kernel.org Signed-off-by:
-
Bart Van Assche authored
commit 48396e80 upstream. Since .scsi_done() must only be called after scsi_queue_rq() has finished, make sure that the SRP initiator driver does not call .scsi_done() while scsi_queue_rq() is in progress. Although invoking sg_reset -d while I/O is in progress works fine with kernel v4.20 and before, that is not the case with kernel v5.0-rc1. This patch avoids that the following crash is triggered with kernel v5.0-rc1: BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G B 5.0.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10 Call Trace: blk_mq_sched_dispatch_requests+0x2f7/0x300 __blk_mq_run_hw_queue+0xd6/0x180 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x4f1/0xa20 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Cc: <stable@vger.kernel.org> Fixes: 94a9174c ("IB/srp: reduce lock coverage of command completion") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 407e17b1 ] Currently mlx5 driver creates xdp redirect hw queues unconditionally on netdevice open, This is great until someone starts redirecting XDP traffic via ndo_xdp_xmit on mlx5 device and changes the device configuration at the same time, this might cause crashes, since the other device's napi is not aware of the mlx5 state change (resources un-availability). To fix this we must synchronize with other devices napi's on the system. Added a new flag under mlx5e_priv to determine XDP TX resources are available, set/clear it up when necessary and use synchronize_rcu() when the flag is turned off, so other napi's are in-sync with it, before we actually cleanup the hw resources. The flag is tested prior to committing to transmit on mlx5e_xdp_xmit, and it is sufficient to determine if it safe to transmit or not. The other two internal flags (MLX5E_STATE_OPENED and MLX5E_SQ_STATE_ENABLED) become unnecessary. Thus, they are removed from data path. Fixes: 58b99ee3 ("net/mlx5e: Add support for XDP_REDIRECT in device-out side") Reported-by:
Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 1db817e7 ] struct tcindex_filter_result contains two parts: struct tcf_exts and struct tcf_result. For the local variable 'cr', its exts part is never used but initialized without being released properly on success path. So just completely remove the exts part to fix this leak. For the local variable 'new_filter_result', it is never properly released if not used by 'r' on success path. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 033b228e ] When tcindex_destroy() destroys all the filter results in the perfect hash table, it invokes the walker to delete each of them. However, results with class==0 are skipped in either tcindex_walk() or tcindex_delete(), which causes a memory leak reported by kmemleak. This patch fixes it by skipping the walker and directly deleting these filter results so we don't miss any filter result. As a result of this change, we have to initialize exts->net properly in tcindex_alloc_perfect_hash(). For net-next, we need to consider whether we should initialize ->net in tcf_exts_init() instead, before that just directly test CONFIG_NET_CLS_ACT=y. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 8015d93e ] tcindex_destroy() invokes tcindex_destroy_element() via a walker to delete each filter result in its perfect hash table, and tcindex_destroy_element() calls tcindex_delete() which schedules tcf RCU works to do the final deletion work. Unfortunately this races with the RCU callback __tcindex_destroy(), which could lead to use-after-free as reported by Adrian. Fix this by migrating this RCU callback to tcf RCU work too, as that workqueue is ordered, we will not have use-after-free. Note, we don't need to hold netns refcnt because we don't call tcf_exts_destroy() here. Fixes: 27ce4f05 ("net_sched: use tcf_queue_work() in tcindex filter") Reported-by:
Adrian <bugs@abtelecom.ro> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 173656ac ] If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by:
Jianlin Shi <jishi@redhat.com> Fixes: ca15a078 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit c0a47e44 ] When we add a new GENEVE device with IPv6 remote, checking only for IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the kernel command line (ipv6.disable=1), and calling rt6_lookup() would cause a NULL pointer dereference. v2: - don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet) - there's no need to use in6_dev_get() as we only need to check that idev exists (reported by David Ahern). This is under RTNL, so we can simply use __in6_dev_get() instead (Stefano, Eric). Reported-by:
-
Johannes Berg authored
[ Upstream commit 98406133 ] Same story as before, these use struct ifreq and thus need to be read with the shorter version to not cause faults. Cc: stable@vger.kernel.org Fixes: f92d4fc9 ("kill bond_ioctl()") Signed-off-by:
-
Johannes Berg authored
[ Upstream commit c6c9fee3 ] As reported by Robert O'Callahan in https://bugzilla.kernel.org/show_bug.cgi?id=202273 reverting the previous changes in this area broke the SIOCGIFNAME ioctl in compat again (I'd previously fixed it after his previous report of breakage in https://bugzilla.kernel.org/show_bug.cgi?id=199469). This is obviously because I fixed SIOCGIFNAME more or less by accident. Fix it explicitly now by making it pass through the restored compat translation code. Cc: stable@vger.kernel.org Fixes: 4cf808e7 ("kill dev_ifname32()") Reported-by:
Robert O'Callahan <robert@ocallahan.org> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 37ac39bd ] This reverts commit bf440573 ("kill dev_ifsioc()"). This wasn't really unused as implied by the original commit, it still handles the copy to/from user differently, and the commit thus caused issues such as https://bugzilla.kernel.org/show_bug.cgi?id=199469 and https://bugzilla.kernel.org/show_bug.cgi?id=202273 However, deviating from a strict revert, rename dev_ifsioc() to compat_ifreq_ioctl() to be clearer as to its purpose and add a comment. Cc: stable@vger.kernel.org Fixes: bf440573 ("kill dev_ifsioc()") Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 63ff03ab ] This reverts commit 1cebf8f1 ("socket: fix struct ifreq size in compat ioctl"), it's a bugfix for another commit that I'll revert next. This is not a 'perfect' revert, I'm keeping some coding style intact rather than revert to the state with indentation errors. Cc: stable@vger.kernel.org Fixes: 1cebf8f1 ("socket: fix struct ifreq size in compat ioctl") Signed-off-by:
-
Cong Wang authored
[ Upstream commit 2fdeee25 ] The current opt_inst_list operations inside team_nl_cmd_options_set() is too complex to track: LIST_HEAD(opt_inst_list); nla_for_each_nested(...) { list_for_each_entry(opt_inst, &team->option_inst_list, list) { if (__team_option_inst_tmp_find(&opt_inst_list, opt_inst)) continue; list_add(&opt_inst->tmp_list, &opt_inst_list); } } team_nl_send_event_options_get(team, &opt_inst_list); as while we retrieve 'opt_inst' from team->option_inst_list, it could be added to the local 'opt_inst_list' for multiple times. The __team_option_inst_tmp_find() doesn't work, as the setter team_mode_option_set() still calls team->ops.exit() which uses ->tmp_list too in __team_options_change_check(). Simplify the list operations by moving the 'opt_inst_list' and team_nl_send_event_options_get() into the nla_for_each_nested() loop so that it can be guranteed that we won't insert a same list entry for multiple times. Therefore, __team_option_inst_tmp_find() can be removed too. Fixes: 4fb0534f ("team: avoid adding twice the same option to the event list") Fixes: 2fcdb2c9 ("team: allow to send multiple set events in one message") Reported-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com Reported-by: syzbot+68ee510075cf64260cc4@syzkaller.appspotmail.com Cc: Jiri Pirko <jiri@resnulli.us> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit af98c5a7 ] In sctp_stream_init(), after sctp_stream_outq_migrate() freed the surplus streams' ext, but sctp_stream_alloc_out() returns -ENOMEM, stream->outcnt will not be set to 'outcnt'. With the bigger value on stream->outcnt, when closing the assoc and freeing its streams, the ext of those surplus streams will be freed again since those stream exts were not set to NULL after freeing in sctp_stream_outq_migrate(). Then the invalid-free issue reported by syzbot would be triggered. We fix it by simply setting them to NULL after freeing. Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+58e480e7b28f2d890bfd@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit fc228abc ] Jianlin reported a panic when running sctp gso over gre over vlan device: [ 84.772930] RIP: 0010:do_csum+0x6d/0x170 [ 84.790605] Call Trace: [ 84.791054] csum_partial+0xd/0x20 [ 84.791657] gre_gso_segment+0x2c3/0x390 [ 84.792364] inet_gso_segment+0x161/0x3e0 [ 84.793071] skb_mac_gso_segment+0xb8/0x120 [ 84.793846] __skb_gso_segment+0x7e/0x180 [ 84.794581] validate_xmit_skb+0x141/0x2e0 [ 84.795297] __dev_queue_xmit+0x258/0x8f0 [ 84.795949] ? eth_header+0x26/0xc0 [ 84.796581] ip_finish_output2+0x196/0x430 [ 84.797295] ? skb_gso_validate_network_len+0x11/0x80 [ 84.798183] ? ip_finish_output+0x169/0x270 [ 84.798875] ip_output+0x6c/0xe0 [ 84.799413] ? ip_append_data.part.50+0xc0/0xc0 [ 84.800145] iptunnel_xmit+0x144/0x1c0 [ 84.800814] ip_tunnel_xmit+0x62d/0x930 [ip_tunnel] [ 84.801699] gre_tap_xmit+0xac/0xf0 [ip_gre] [ 84.802395] dev_hard_start_xmit+0xa5/0x210 [ 84.803086] sch_direct_xmit+0x14f/0x340 [ 84.803733] __dev_queue_xmit+0x799/0x8f0 [ 84.804472] ip_finish_output2+0x2e0/0x430 [ 84.805255] ? skb_gso_validate_network_len+0x11/0x80 [ 84.806154] ip_output+0x6c/0xe0 [ 84.806721] ? ip_append_data.part.50+0xc0/0xc0 [ 84.807516] sctp_packet_transmit+0x716/0xa10 [sctp] [ 84.808337] sctp_outq_flush+0xd7/0x880 [sctp] It was caused by SKB_GSO_CB(skb)->csum_start not set in sctp_gso_segment. sctp_gso_segment() calls skb_segment() with 'feature | NETIF_F_HW_CSUM', which causes SKB_GSO_CB(skb)->csum_start not to be set in skb_segment(). For TCP/UDP, when feature supports HW_CSUM, CHECKSUM_PARTIAL will be set and gso_reset_checksum will be called to set SKB_GSO_CB(skb)->csum_start. So SCTP should do the same as TCP/UDP, to call gso_reset_checksum() when computing checksum in sctp_gso_segment. Reported-by:
-
Russell King authored
[ Upstream commit b5bfc21a ] When we probe a SFP module, we expect to be able to call the upstream device's module_insert() function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose the module_insert() call. Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Kal Conley authored
[ Upstream commit fc62814d ] When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Check it for overflow without limiting the total buffer size to UINT_MAX. This change fixes support for packet ring buffers >= UINT_MAX. Fixes: 8f8d28e4 ("net/packet: fix overflow in check for tp_frame_nr") Signed-off-by:
Kal Conley <kal.conley@dectris.com> Signed-off-by:
-
Tonghao Zhang authored
[ Upstream commit 218d05ce ] In some case, we may use multiple pedit actions to modify packets. The command shown as below: the last pedit action is effective. $ tc filter add dev netdev_rep parent ffff: protocol ip prio 1 \ flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \ action pedit ex munge ip dst set 192.168.1.100 pipe \ action pedit ex munge eth src set 00:00:00:00:00:01 pipe \ action pedit ex munge eth dst set 00:00:00:00:00:02 pipe \ action csum ip pipe \ action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \ action mirred egress redirect dev vxlan0 To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction, max_mod_hdr_actions will store the max pedit action number we support and num_mod_hdr_actions indicates how many pedit action we used, and store all pedit action to mod_hdr_actions. Fixes: d79b6df6 ("net/mlx5e: Add parsing of TC pedit actions to HW format") Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
-
Saeed Mahameed authored
[ Upstream commit 29dded89 ] When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, it is not guaranteed. For example, switches might choose to make other use of these octets. This repeatedly causes kernel hardware checksum fault. Prior to the cited commit below, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it does not worth the effort as the packets are so small that CHECKSUM_COMPLETE has no significant advantage. Future work: when reporting checksum complete is not an option for IP non-TCP/UDP packets, we can actually fallback to report checksum unnecessary, by looking at cqe IPOK bit. Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
