- 21 Apr, 2020 40 commits
-
-
Helen Koike authored
If no errors occurs, pm functions return usage counters, so they can return positive numbers. This happens when streaming from multiple capture devices (mainpath and selfpath). Fix simultaneous streaming from mainpath and selfpath by not failing when pm usage counters returns a positive number. Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Hans Verkuil authored
Rather than creating new compound control helpers for each new type, create one generic function and just create defines on top. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Hans Verkuil authored
If the v4l2_ctrl_g_ctrl*() or __v4l2_ctrl_s_ctrl*() functions are called for the wrong control type then they call WARN_ON since that is a driver error. But they still continue, potentially overwriting data. Change this to return an error (s_ctrl) or 0 (g_ctrl), just to be safe. Signed-off-by:
-
Sean Young authored
Since commit 4957133f ("media: lirc: improve locking"), drivers do not need to do any of their own locking. During suspend and resume, no processes are running so no locking is needed. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Brad Love authored
Remove vbi_regs_offset from a group of registers that are 888 specific, include those registers names. Sources used for reference are 885 and 888 datasheets. Add labels to some undocumented registers. Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
-
Brad Love authored
The CNR is already calculated, so populate DVBv5 CNR stat during read_status. Signed-off-by:
-
Brad Love authored
Add get_rf_strength callback to get RSSI from the tuner. DVBv5 stat cache is updated. get_rf_strength is called by tuner_core for analog tuners and is also used by some bridge drivers to obtain RSSI directly from the tuner. Signed-off-by:
-
Brad Love authored
The boards listed below use i2c device drivers and have tuner_type equal TUNER_ABSENT. This means additional support is required to enable the analog tuning capability, a case statement is used to identify these models. Models with analog tuning enabled: - CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx (tested) - CX231XX_BOARD_HAUPPAUGE_935C (tested) - CX231XX_BOARD_HAUPPAUGE_955Q (tested) - CX231XX_BOARD_HAUPPAUGE_975 (tested) - CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD (untested) The EvroMedia model was added, since it uses the si2157 tuner and the board profile claims it has analog inputs. Signed-off-by:
-
Brad Love authored
Hauppauge QuadHD/1265/5525 boards all use i2c device drivers and have tuner_type equal TUNER_ABSENT. This means additional support is required to enable the analog tuning capability, a case statement is used to identify these models. Signed-off-by:
-
Brad Love authored
Enables the analog tuning frontend for Hauppauge HVR-5525. Signed-off-by:
-
Brad Love authored
Enables the analog tuning frontend for Hauppauge HVR-1265_K4. Signed-off-by:
-
Brad Love authored
Add analog tuner frontend to 888 Hauppauge QuadHD boards Signed-off-by:
-
Brad Love authored
In some debugging cases it is useful to know how long it took signal lock to happen after tuning. This can help diagnose line issues. Signed-off-by:
-
Brad Love authored
To detect errors in the tuning operation, this waits up 40ms for operation completion status. This allows for error detection and prevents issuing additional commands to the tuner before it is finished. Tuning typically completes in 20-30ms. Signed-off-by:
-
Brad Love authored
Include set_analog_params, get_frequency, and get_bandwidth. Tested with NTSC and PAL standards via ch3/4 generator. Other standards are included, but are untested due to lack of generator. Signed-off-by:
-
Brad Love authored
Getting the Xtal trim property to check if running is less error prone. Reset if_frequency if state is unknown. Replaces the previous "garbage check". Signed-off-by:
-
Brad Love authored
Check error status bit on command execute, if error bit is set return -EAGAIN. Ignore -EAGAIN in probe during device check. Signed-off-by:
-
Brad Love authored
Enable flags to get status of commands sent to the tuner. Signed-off-by:
-
Boris Brezillon authored
The rockchip vdec block is a stateless decoder that's able to decode H264, HEVC and VP9 content. This commit adds the core infrastructure and the H264 backend. Support for VP9 and HEVS will be added later on. [mchehab+huawei@kernel.org: select MEDIA_CONTROLLER and REQUEST_API] Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Tested-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Boris Brezillon authored
Document the Rockchip RK3399 Video Decoder bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Boris Brezillon authored
Now that the core provides generic reflist builders, we can use them instead of implementing our own. Signed-off-by:
-
Boris Brezillon authored
Building those list is a standard procedure described in section '8.2.4 Decoding process for reference picture lists construction' of the H264 specification. We already have 2 drivers needing the same logic (hantro and rkvdec) and I suspect we will soon have more. Let's provide generic helpers to create those lists. Signed-off-by:
-
Ezequiel Garcia authored
Instead of depending on the Rockchip PHY driver the ISP driver should really depend on CONFIG_GENERIC_PHY_MIPI_DPHY, given all it needs is the phy_mipi_dphy_get_default_config() symbol. Fix it. Signed-off-by:
-
Ezequiel Garcia authored
The driver is perfectly capable of being built without CONFIG_OF. Remove this dependency, which is useful for compile-only tests. Signed-off-by:
-
Ezequiel Garcia authored
If CONFIG_OF is not selected, the compiler will complain: drivers/staging/media/rkisp1/rkisp1-dev.c: In function ‘rkisp1_probe’: drivers/staging/media/rkisp1/rkisp1-dev.c:457:22: warning: unused variable ‘node’ [-Wunused-variable] 457 | struct device_node *node = pdev->dev.of_node; Rework the code slightly and make the compiler happy. Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Seungchul Kim authored
v4l2_fh struct define differently by CONFIG_V4L2_MEM2MEM_DEV. If some vendors use CONFIG_V4L2_MEM2MEM_DEV by module, it can make the mismatch of v4l2_fh sturct. By the mismatch, the following error occurs. =============================== [ 7.533506] v4l2_mem2mem: disagrees about version of symbol video_devdata [ 7.533594] v4l2_mem2mem: Unknown symbol video_devdata (err -22) [ 7.535319] v4l2_mem2mem: disagrees about version of symbol v4l2_event_pending [ 7.542532] v4l2_mem2mem: Unknown symbol v4l2_event_pending (err -22) =============================== So v4l2_fh struct is modified to does not have dependency for CONFIG_V4L2_MEM2MEM_DEV. Signed-off-by:
Seungchul Kim <sc377.kim@samsung.com> Signed-off-by:
-
Dafna Hirschfeld authored
The fields 'fmt_type' in the structs 'rkisp1_rsz_config', 'rkisp1_isp_mbus_info' are of type 'v4l2_pixel_encoding' so it is nicer to change their name to 'pixel_enc'. Also change the define 'RKISP1_DEF_FMT_TYPE' to 'RKISP1_DEF_PIXEL_ENC' Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
The pixel encoding can be retrieved from the cap->pix.info. Therefore the field fmt_type can be removed from the struct rkisp1_capture_fmt_cfg. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Dafna Hirschfeld authored
The enum rkisp1_fmt_pix_type that holds the pixel format which is one of RGB, YUV, BAYER, can be replace by the v4l2 enum v4l2_pixel_encoding. Signed-off-by:
-
Kieran Bingham authored
Enabling CONFIG_DMA_API_DEBUG=y and CONFIG_DMA_API_DEBUG_SG=y will enable extra validation on DMA operations ensuring that the size restraints are met. When using the FCP in conjunction with the VSP1/DU, and display frames, the size of the DMA operations is larger than the default maximum segment size reported by the DMA core (64K). With the DMA debug enabled, this produces a warning such as the following: "DMA-API: rcar-fcp fea27000.fcp: mapping sg segment longer than device claims to support [len=3145728] [max=65536]" We have no specific limitation on the segment size which isn't already handled by the VSP1/DU which actually handles the DMA allcoations and buffer management, so define a maximum segment size of up to 4GB (a 32 bit mask). Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 7b49235e ("[media] v4l: Add Renesas R-Car FCP driver") Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
-
Dafna Hirschfeld authored
remove the TODO item: * Make sure uapi structs have the same size and layout in 32 and 62 bits, and that there are no holes in the structures (pahole is a utility that can be used to test this). It was tested with pahole and found compatible. Signed-off-by:
-
Dan Carpenter authored
If these functions fail then we return success, but we should instead preserve negative error code and return that. Fixes: fde649b4 ("media: vicodec: Register another node for stateless decoder") Fixes: c022a4a9 ("media: vicodec: add struct for encoder/decoder instance") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Fabio Estevam authored
Improve the documentation by providing examples on how to test camera capture on imx6q-sabresd via v4l2-ctl and Gstreamer. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by: Steve Longerbeam<slongerbeam@gmail.com> Signed-off-by:
-
Fabio Estevam authored
In order to improve the documentation, provide the OV5640 MIPI module part number that is used on the imx6q-sabresd board. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Fabio Estevam authored
The current example for imx6q-sabresd is for a direct conversion pipeline. Provide an extra example using unprocessed video capture for completeness. Signed-off-by:
-
Fabio Estevam authored
The current instructions for imx6q-sabresd do not lead to functional capture on OV5640 MIPI CSI-2. The reason for this, as explained by Steve Longerbeam, is that OV5640 by default transmits on virtual channel 0, not channel 1 as is given in the instructions. Adapt the instructions to use virtual channel 0 so that a working camera setup can be achieved on imx6q-sabresd. Also, since we are using an IC direct conversion pipeline, improve the example by demonstrating colorspace and scaling. Signed-off-by:
-
Maheshwar Ajja authored
Add H264 profile "Contrained High" and H264 levels "5.2", "6.0", "6.1" and "6.2". Signed-off-by:
Maheshwar Ajja <majja@codeaurora.org> Signed-off-by:
-
Maheshwar Ajja authored
Add H264 profile "Contrained High" and H264 levels "5.2", "6.0", "6.1" and "6.2". Signed-off-by:
-
Fabio Estevam authored
Currently v4l2-compliance tool returns the following output: Compliance test for imx-media-csc-s device /dev/video8: Driver Info: Driver name : imx-media-csc-s Card type : imx-media-csc-scaler Bus info : platform:imx-media-csc-scaler The driver name string is limited to 16 characters, so provide a shorter name in order to get a better output. While at it, use the same shorter name for driver, card and platform. Signed-off-by: -
Colin Ian King authored
The variable status is being assigned a value that is never read. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
