- 27 Jul, 2014 5 commits
-
-
Lars-Peter Clausen authored
Makes the code slightly shorter and a bit easier to understand. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Teodora Baluta authored
Fix the following sparse warnings: CHECK drivers/staging/iio/impedance-analyzer/ad5933.c drivers/staging/iio/impedance-analyzer/ad5933.c:241:17: warning: incorrect type in assignment (different base types) drivers/staging/iio/impedance-analyzer/ad5933.c:241:17: expected unsigned int [unsigned] [usertype] d32 drivers/staging/iio/impedance-analyzer/ad5933.c:241:17: got restricted __be32 [usertype] <noident> drivers/staging/iio/impedance-analyzer/ad5933.c:263:13: warning: incorrect type in assignment (different base types) drivers/staging/iio/impedance-analyzer/ad5933.c:263:13: expected unsigned short [unsigned] dat drivers/staging/iio/impedance-analyzer/ad5933.c:263:13: got restricted __be16 [usertype] <noident> drivers/staging/iio/impedance-analyzer/ad5933.c:271:13: warning: incorrect type in assignment (different base types) drivers/staging/iio/impedance-analyzer/ad5933.c:271:13: expected unsigned short [unsigned] [addressable] dat drivers/staging/iio/impedance-analyzer/ad5933.c:271:13: got restricted __be16 [usertype] <noident> drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to restricted __be32 drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to restricted __be32 drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to restricted __be32 drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to restricted __be32 drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to restricted __be32 drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to restricted __be32 drivers/staging/iio/impedance-analyzer/ad5933.c:446:21: warning: incorrect type in assignment (different base types) drivers/staging/iio/impedance-analyzer/ad5933.c:446:21: expected unsigned short [unsigned] dat drivers/staging/iio/impedance-analyzer/ad5933.c:446:21: got restricted __be16 [usertype] <noident> drivers/staging/iio/impedance-analyzer/ad5933.c:454:21: warning: incorrect type in assignment (different base types) drivers/staging/iio/impedance-analyzer/ad5933.c:454:21: expected unsigned short [unsigned] [addressable] dat drivers/staging/iio/impedance-analyzer/ad5933.c:454:21: got restricted __be16 [usertype] <noident> drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to restricted __be16 drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to restricted __be16 drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to restricted __be16 drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to restricted __be16 Signed-off-by:
Teodora Baluta <teodora.baluta@intel.com> Signed-off-by:
-
Philippe Reynes authored
Signed-off-by:
Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by:
-
Reyad Attiyat authored
Fix build warning, sizeof() called on dynamically sized pointer, by removing the call and the dependent function parameter. It is not needed or used in this driver, when pushing values to an iio buffer. Changes from v1 - Fix mistake in varible name Signed-off-by:
Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by:
-
Cihangir Akturk authored
This patch fixes the following checkpatch.pl issues in gdm_usb.c: ERROR: that open brace { should be on the previous line Signed-off-by:Cihangir Akturk <cakturk@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 Jul, 2014 1 commit
-
-
Jeff Oczek authored
Fix sparse warnings: drivers/staging/rtl8188eu/core/rtw_cmd.c:52:5: warning: symbol '_rtw_enqueue_cmd' was not declared. Should it be static? drivers/staging/rtl8188eu/core/rtw_wlan_util.c:1225:5: warning: symbol 'wifirate2_ratetbl_inx' was not declared. Should it be static? drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c:25:4: warning: symbol 'ODM_GetRightChnlPlaceforIQK' was not declared. Should it be static? drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:3109:5: warning: symbol 'rtw_ioctl' was not declared. Should it be static? Signed-off-by:
Jeff Oczek <jeffoczek@gmail.com> Signed-off-by:
-
- 24 Jul, 2014 34 commits
-
-
Malcolm Priestley authored
Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
Signed-off-by:
-
Malcolm Priestley authored
Replacing MP_CLEAR_FLAG Signed-off-by:
-
Malcolm Priestley authored
Replacing MP_SET_FLAG Signed-off-by:
-
Malcolm Priestley authored
merge u32 flag into unsigned long Flags Replacing fMP_DISCONNECTED with DEVICE_FLAGS_DISCONNECTED Signed-off-by:
-
Malcolm Priestley authored
Signed-off-by:
-
Malcolm Priestley authored
Just test FLag and remove not. Signed-off-by:
-
Malcolm Priestley authored
MP_IS_READY(fMP_DISCONNECTED) is used to block thread in vnt_tx_context Signed-off-by:
-
Igor Bezukh authored
Removed redundant comments from bssdb.h header file. Signed-off-by:
Igor Bezukh <igbzkh@gmail.com> Signed-off-by:
-
Igor Bezukh authored
Removed redundant comments in baseband.h header file. Signed-off-by:
-
Benjamin Romer authored
This patch adds a documentation file for all of the interfaces that were moved to sysfs by the other patches in this set. Signed-off-by:
Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by:
-
Benjamin Romer authored
Remove remnant code left over from the diagdump proc entry. Signed-off-by:
-
Benjamin Romer authored
Move the chipsetready proc entry to sysfs under a new directory guest. This entry is used by Unisys application software on the guest to acknowledge completion of specific events for integration purposes, but these acknowledgements are not required for the guest to operate correctly. The store function is simplified as well, to use scanf() instead of copying the buffer and using strsep(). Signed-off-by:
-
Benjamin Romer authored
The installer entry in /proc/visorchipset/installer was composed of three separate fields as one entry. This patch removes the proc entry and associated functions, and creates new fields with distinct entries under sysfs in the visorchipset/install directory. The fields are: textid: used to send the ID of a string that should be displayed on s-Par's automatic installation progress screen. Setting this field when not in installation mode (boottotool was set on the previous guest boot) has no effect. remaining_steps: used to set the value of the progress bar on the s-Par automatic installation progress screen. This field has no effect if not in installation mode. error: used to send the ID of a string that should be displayed on s-Par's automatic installation progress screen when an error is encountered during installation. This field has no effect if not in installation mode. Signed-off-by:
-
Masanari Iida authored
This patch removes trailing semicolon from macros within et131x.h Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Masanari Iida authored
This patch fix spelling typos in comments and printk within et131x. Signed-off-by:
-
Bernd Porr authored
Added a missing "break" which forced the board to acquire 16 channels even when only 3 had been requested. Thanks for Hartley Sweeten to spot this bug. Signed-off-by:
Bernd Porr <mail@berndporr.me.uk> Reported-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Reviewed-by:
-
Seunghun Lee authored
This patch fixes checkpatch errors: "space required after that ','" Signed-off-by:
Seunghun Lee <waydi1@gmail.com> Signed-off-by:
-
Andrey Skvortsov authored
Signed-off-by:
Andrey Skvortsov <Andrej.Skvortzov@gmail.com> Signed-off-by:
-
Ian Abbott authored
When the hardware is being initialized, the edge detection interrupts are cleared and disabled. Also disable edge detection for all channels at this time so they start off in a known state. Signed-off-by:
-
Ian Abbott authored
The "edge detection interrupt" subdevice supports the `INSN_CONFIG_CHANGE_NOTIFY` comedi instruction which is only supported by one other driver. It is limited to the first 32 channels, but boards supported by this driver support edge detection on all digital I/O, digital input and digital output channels. The `INSN_CONFIG_DIGITAL_TRIG` comedi instruction is more flexible as it supports more than 32 channels (with multiple instructions). It can also support level detection, but the hardware does not support that. Add partial support for the `INSN_CONFIG_DIGITAL_TRIG` instruction, but only for edge detection. Since `INSN_CONFIG_CHANGE_NOTIFY` can only deal with 32 channels, make it disable edge detection for any remaining channels. Signed-off-by:
-
Ian Abbott authored
Refactor the code that updates the rising and falling edge detection registers into new function `ni_65xx_update_edge_detection()`. This updates the rising and falling edge detection registers for up to 32 channels starting at an arbitrary channel. Call it from the code that handles the `INSN_CONFIG_CHANGE_NOTIFY` instruction, which is limited to the first 32 channels. (For the purposes of edge detection, the channels are in the natural port order of the board, 8 channels per port. In practice, this is all the digital I/O channels (if any), followed by all the digital input channels (if any), followed by all the digital output channels (if any). Signed-off-by:
-
Ian Abbott authored
Add a function to return the total number of digital I/O, digital input, and digital output ports on the board. Each port has 8 channels (bits). Signed-off-by:
-
Kristina Martšenko authored
The driver hasn't been cleaned up and it doesn't look like anyone is working on it anymore (including the original author). So remove the driver from the kernel. If someone wants to work on cleaning it up and moving it out of staging, this commit can be reverted. Signed-off-by:
Kristina Martšenko <kristina.martsenko@gmail.com> Cc: Angelo Arrifano <miknix@gentoo.org> Signed-off-by:
-
Kristina Martšenko authored
The driver hasn't been cleaned up and it doesn't look like anyone is working on it anymore (including the original author). So remove the driver from the kernel. If someone wants to work on cleaning it up and moving it out of staging, this commit can be reverted. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-3.17d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Fourth round of IIO new drivers, functionality and cleanups for the 3.17 cycle New functionality * A new modifier to indicate that a rotation is relative to either true or magnetic north. This is to be used by some magnetometers that provide data in this way. * hid magnetometer now supports output rotations from various variants on North * HMC5843 driver converted to regmap and reworked to allow easy support of other similar devices. Support for HMC5983 added via both i2c and SPI. * Rework of Exynos driver to simplify extension to support more devices. * Addition of support for the Exynos3250 ADC (which requires an additional clock) Support for quite a few more devices on its way. Cleanups * ad7997 - a number of cleanups and tweaks to how the events are controlled to make it more intuitive. * kxcjk - cleanups and minor fixes for this new driver.
-
Kristina Martšenko authored
The driver hasn't been fully cleaned up and it doesn't look like anyone is working on it anymore (including the original author). So remove the driver and all references to it. If someone wants to finish cleaning the driver up and moving it out of staging, this commit can be reverted. Signed-off-by:
-
Kristina Martšenko authored
The driver hasn't been cleaned up and it doesn't look like anyone is working on it anymore (including the original author). So remove the driver from the kernel. If someone wants to work on cleaning it up and moving it out of staging, this commit can be reverted. Signed-off-by:
-
Kristina Martšenko authored
The state of the driver hasn't improved much since it was added to staging, and no one with the hardware is currently working on it, so remove it. This commit can be reverted if someone wants to clean the driver up and move it to its proper place in the kernel. Signed-off-by:
-
Matthias Beyer authored
The variable 'i' does not need to be passed, as we set it to 0 (zero) anyways when starting the iteration here. Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Matthias Beyer <mail@beyermatthias.de> Signed-off-by:
-
Matthias Beyer authored
The variable type of the local variable 'j' should be 'int' instead of 'unsigned int'. Suggested-by:
-
Sudip Mukherjee authored
Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Tom Jorquera authored
vme_user.c contained unnecessary breaks after gotos, which increased code size and caused code style warning. This is now fixed. Signed-off-by:
Tom Jorquera <tom.jorquera@gmail.com> Signed-off-by:
-
Andrey Utkin authored
The issue was reported by static analysis. The value holding flags was &-ed with 0x02, being compared to 0x01 (TRUE) after that. Such comparsion is always false. Resolution: drop the comparsion to TRUE in the condition. &-ing with 0x02 is right, according to result variable name (reporting_mode) and description in drivers/staging/bcm/target_params.h ("bit 1 = 1: CINR reporting in Idlemode Msg"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80801Reported-by:David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by:
-
