- 12 May, 2020 25 commits
-
-
Willy Tarreau authored
In floppy_resume() we don't properly reinitialize all FDCs, instead we reinitialize the current FDC once per available FDC because value -1 is passed to user_reset_fdc(). Let's simply save the current drive and properly reinitialize each FDC. Link: https://lore.kernel.org/r/20200410101904.14652-1-w@1wt.euSigned-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Denis Efremov <efremov@linux.com>
-
Willy Tarreau authored
There's no need to iterate on current_fdc in do_floppy_init() anymore, in the first case it's only used as an array index to access fdc_state[], so let's get rid of this confusing assignment. The second case is a bit trickier because user_reset_fdc() needs to already know current_fdc when called with drive==-1 due to this call chain: user_reset_fdc() lock_fdc() set_fdc() drive<0 ==> new_fdc = current_fdc Note that current_drive is not used in this code part and may even not match a unit belonging to current_fdc. Instead of passing -1 we can simply pass the first drive of the FDC being initialized, which is even cleaner as it will allow the function chain above to consistently assign both variables. Link: https://lore.kernel.org/r/20200410093023.14499-1-w@1wt.euSigned-off-by: -
Willy Tarreau authored
The locking in the driver is far from being obvious, with unlocking automatically happening at end of operations scheduled by interrupt, especially for the error paths where one does not necessarily expect that such an interrupt may be triggered. Let's add a few comments about what to expect at certain places to avoid misdetecting bugs which are not. Link: https://lore.kernel.org/r/20200331094054.24441-24-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Both floppy_grab_irq_and_dma() and floppy_release_irq_and_dma() used to iterate on the global variable while setting up or freeing resources. Now that they exclusively rely on functions which take the fdc as an argument, so let's not touch the global one anymore. Link: https://lore.kernel.org/r/20200331094054.24441-23-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-22-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the drive is passed in argument so that the function does not use current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-21-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc and drive are passed in argument so that the function does not use current_fdc nor current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-20-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc and drive are passed in argument so that the function does not use current_fdc nor current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-19-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-18-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc is passed in argument so that the function does not use current_fdc anymore. It's worth noting that there's still a single raw_cmd pointer specific to the current fdc. It may make sense to have one per fdc in the future. In addition, cont->done() still relies on the current drive and current raw_cmd. Link: https://lore.kernel.org/r/20200331094054.24441-17-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-16-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc is passed in argument so that the function does not use current_fdc anymore. It's worth noting that there's still a single reply_buffer[] which will store the result for the current fdc. It may or may not make sense to implement one buffer per fdc in the future. Link: https://lore.kernel.org/r/20200331094054.24441-15-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-14-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-13-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-12-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-11-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now the fdc and drive are passed in argument so that the function does not use current_fdc nor current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-10-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do this, and also use STATUS_DMA and STATUS_READY for the status bits. Link: https://lore.kernel.org/r/20200331094054.24441-9-w@1wt.eu Cc: x86@kernel.org Signed-off-by:
-
Willy Tarreau authored
Now by splitting the base address from the register index we can use the symbolic register names instead of the hard-coded numeric values. Link: https://lore.kernel.org/r/20200331094054.24441-8-w@1wt.eu Cc: "David S. Miller" <davem@davemloft.net> [willy: fix printk warnings s/%lx/%x/g in sun_82077_fd_{inb,outb}()] Signed-off-by:
-
Willy Tarreau authored
The sparc port used to be forced to rely on numeric register indexes with their equivalent in comments. Now that they don't depend on the IO port we can use their symbolic names. Link: https://lore.kernel.org/r/20200331094054.24441-7-w@1wt.eu Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Willy Tarreau authored
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do this, and also use STATUS_DMA and STATUS_READY for the status bits. Link: https://lore.kernel.org/r/20200331094054.24441-6-w@1wt.eu Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Willy Tarreau authored
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do this, and also use STATUS_DMA and STATUS_READY for the status bits. Link: https://lore.kernel.org/r/20200331094054.24441-5-w@1wt.eu Cc: Helge Deller <deller@gmx.de> Signed-off-by:
-
Willy Tarreau authored
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do this, and also use STATUS_DMA and STATUS_READY for the status bits. Link: https://lore.kernel.org/r/20200331094054.24441-4-w@1wt.eu Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Willy Tarreau authored
This controller provides extra status registers SRA and SRB as well as a tape drive register (TDR) and a data rate select register (DSR), which are referenced in the sparc port, so let's have their symbolic definitions centralized. Link: https://lore.kernel.org/r/20200331094054.24441-3-w@1wt.euSigned-off-by:
-
Willy Tarreau authored
Currently we have architecture-specific fd_inb() and fd_outb() functions or macros, taking just a port which is in fact made of a base address and a register. The base address is FDC-specific and derived from the local or global "fdc" variable through the FD_IOPORT macro used in the base address calculation. This change splits this by explicitly passing the FDC's base address and the register separately to fd_outb() and fd_inb(). It affects the following archs: - x86, alpha, mips, powerpc, parisc, arm, m68k: simple remap of port -> base+reg - sparc32: use of reg only, since the base address was already masked out and the FDC controller is known from a static struct. - sparc64: like x86 for PCI, like sparc32 for 82077 Some archs use inline functions and others macros. This was not unified in order to minimize the number of changes to review. For the same reason checkpatch still spews a few warnings about things that were already there before. The parisc still uses hard-coded register values and could be cleaned up by taking the register definitions. The sparc per-controller inb/outb functions could further be refined to explicitly take an FDC register instead of a port in argument but it was not needed yet and may be cleaned later. Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Ian Molton <spyro@f2s.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: x86@kernel.org Signed-off-by:
-
- 09 May, 2020 15 commits
-
-
Keith Busch authored
Improve code readability by defining the specification's constants that the driver is using when decoding identification payloads. Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Bart van Assche <bvanassche@acm.org> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Chaitanya Kulkarni authored
With reference to the NVMeOF Specification (page 44, Figure 38) discovery log page entry provides address family field. We do set the transport type field but the adrfam field is not set when using loop transport and also it doesn't have support in the nvme-cli. So when reading discovery log page with a loop transport it leads to confusing output. As per the spec for adrfam value 254 is reserved for Intra Host Transport i.e. loopback), we add a required macro in the protocol header file, set default port disc addr entry's adrfam to NVMF_ADDR_FAMILY_MAX, and update nvmet_addr_family configfs array for show/store attribute. Without this patch, setting adrfam to (ipv4/ipv6/ib/fc/loop/" ") we get following output for nvme discover command from nvme-cli which is confusing. trtype: loop adrfam: ipv4 trtype: loop adrfam: ipv6 trtype: loop adrfam: infiniband trtype: loop adrfam: fibre-channel trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop adrfam: pci # <----- pci for loop trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = " " adrfam: pci # <----- pci for unrecognized This patch fixes above output :- trtype: loop adrfam: ipv4 trtype: loop adrfam: ipv6 trtype: loop adrfam: infiniband trtype: loop adrfam: fibre-channel trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop adrfam: loop # <----- loop for loop trtype: loop # ${CFGFS_HOME}/config/nvmet/ports/adrfam = " " adrfam: unrecognized # <----- unrecognized when invalid value Signed-off-by: -
Chaitanya Kulkarni authored
The configfs attributes which are supposed to set when port is disable such as addr[addrfam|portid|traddr|treq|trsvcid|inline_data_size|trtype] has repetitive check and generic error message printing. This patch creates centralize helper to check and print an error message that also accepts caller as a parameter. This makes error message easy to parse for the user, removes the duplicate code and makes it available for futures such scenarios. Signed-off-by:
-
Chaitanya Kulkarni authored
Currently nvmet_addr_treq_[store|show]() uses switch and if else ladder for address transport requirements to string and reverse mapping. With addtion of the generic nvmet_type_name_map structure we can get rid of the switch and if else ladder with string duplication. Signed-off-by:
-
Chaitanya Kulkarni authored
Now that we have a generic type to name map for configfs, get rid of the nvmet_ana_state_names structure and replace it with newly added nvmet_type_name_map. Signed-off-by:
-
Chaitanya Kulkarni authored
Right now nvmet_addr_adrfam_[store|show]() uses switch and if else ladder for address family to string and reverse mapping which also repeats the strings in show and store function. With addition of generic nvmet_type_name_map structure we can now get rid of the switch and if else ladder and string duplication. Also, we add a newline in before found label in nvmet_addr_trtype_store() which keeps goto label code consistent with nvmet_allowed_hosts_drop_link(), nvmet_port_subsys_drop_link() and nvmet_ana_group_ana_state_store(). Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds a new type to name mapping generic structure. It replaces nvmet_transport_name with new generic mapping structure nvmet_transport. Signed-off-by:
-
Christoph Hellwig authored
nvme-multipath already uses the gendisk private data, not need to also set up the request_queue queuedata and use it in one place only. Signed-off-by:
-
Sagi Grimberg authored
Today, nvme-tcp automatically schedules a send request to a workqueue context, which is 1 more than we'd need in case the socket buffer is wide open. However, because we have async send activity (as a result of r2t, or write_space callbacks), we need to synchronize sends from possibly multiple contexts (ideally all running on the same cpu though). Thus, we only try to send directly from queue_rq in cases: 1. the send_list is empty 2. we can send it synchronously (i.e. not from the RX path) 3. we run on the same cpu as the queue->io_cpu to avoid contention on the send operation. Proposed-by:
Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by:
-
Sagi Grimberg authored
When the user runs polled I/O, we shouldn't have to trigger the workqueue to generate the receive work upon the .data_ready upcall. This prevents a redundant context switch when the application is already polling for completions. Proposed-by:
-
Sagi Grimberg authored
data_ready may be invoked from send context or from softirq, so need bh locking for that. Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by:
-
Weiping Zhang authored
Since commit 147b27e4 ("nvme-pci: allocate device queues storage space at probe"), nvme_alloc_queue does not alloc the nvme queues itself anymore. If the write/poll_queues module parameters are changed at runtime to values larger than the number of allocated queues in nvme_probe, nvme_alloc_queue will access unallocated memory. Add a new nr_allocated_queues member to struct nvme_dev to record how many queues were alloctated in nvme_probe to avoid using more than the allocated queues after a reset following a change to the write/poll_queues module parameters. Also add nr_write_queues and nr_poll_queues members to allow refreshing the number of write and poll queues based on a change to the module parameters when resetting the controller. Fixes: 147b27e4 ("nvme-pci: allocate device queues storage space at probe") Signed-off-by:
Weiping Zhang <zhangweiping@didiglobal.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> [hch: add nvme_max_io_queues, update the commit message] Signed-off-by:
-
Keith Busch authored
The nvme driver does not have enough tags to wrap the queue, and blk-mq will no longer call commit_rqs() when there are no new submissions to notify. Signed-off-by:
-
Keith Busch authored
The completion queue entry is not volatile once the phase is confirmed. Remove the volatile keywords and check the phase using the appropriate READ_ONCE() accessor, allowing the compiler to optimize the remaining completion path. Signed-off-by:
-
Keith Busch authored
If a passthrough command causes the namespace inventory or capabilities to change, flush the scan work that handles these changes so the driver synchronizes with the user command's effects before returning the result to user space. Signed-off-by:
-
