- 17 Dec, 2019 5 commits
-
-
Daniel Vetter authored
I'll add more fancy logic to them soon, so everyone really has to use them. Plus they already provide some nice additional debug infrastructure on top of direct ww_mutex usage for the fences tracked by dma_resv. Reviewed-by:
Eric Anholt <eric@anholt.net> Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191125094356.161941-5-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
I'll add more fancy logic to them soon, so everyone really has to use them. Plus they already provide some nice additional debug infrastructure on top of direct ww_mutex usage for the fences tracked by dma_resv. Reviewed-by:
-
Andrew F. Davis authored
The heaps are already in a directory of heaps, adding _heap to a heap name is redundant. This patch is only a name change, no logic is changed. Signed-off-by:
Andrew F. Davis <afd@ti.com> Acked-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191216133405.1001-3-afd@ti.com
-
Andrew F. Davis authored
This is more consistent with the DMA and DRM frameworks convention. This patch is only a name change, no logic is changed. Signed-off-by:
-
Jani Nikula authored
Add new struct drm_device based logging macros modeled after the core kernel device based logging macros. These would be preferred over the drm printk and struct device based macros in drm code, where possible. We have existing drm specific struct device based logging functions, but they are too verbose to use for two main reasons: * The names are unnecessarily long, for example DRM_DEV_DEBUG_KMS(). * The use of struct device over struct drm_device is too generic for most users, leading to an extra dereference. For example: DRM_DEV_DEBUG_KMS(drm->dev, "Hello, world\n"); vs. drm_dbg_kms(drm, "Hello, world\n"); It's a matter of taste, but the SHOUTING UPPERCASE has been argued to be less readable than lowercase. Some names are changed from old DRM names to be based on the core kernel logging functions. For example, NOTE -> notice, ERROR -> err, DEBUG -> dbg. Due to the conflation of DRM_DEBUG and DRM_DEBUG_DRIVER macro use (DRM_DEBUG is used widely in drivers though it's supposed to be a core debugging category), they are named as drm_dbg_core and drm_dbg, respectively. The drm_err and _once/_ratelimited variants no longer include the function name in order to be able to use the core device based logging macros. Arguably this is not a significant change; error messages should not be so common to be only distinguishable by the function name. Ratelimited debug logging macros are to be added later. Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Sean Paul <sean@poorly.run> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191210123050.8799-1-jani.nikula@intel.com
-
- 16 Dec, 2019 27 commits
-
-
Ville Syrjälä authored
We depend on a specific relationship between the VIC number and the index in the CEA mode arrays. Assert that the arrays have the expected size to make sure we've not accidentally left holes in them. v2: Pimp the BUILD_BUG_ON()s v3: Fix typos (Manasi) Cc: Hans Verkuil <hansverk@cisco.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Thomas Anderson <thomasanderson@google.com> Signed-off-by:
-
Ville Syrjälä authored
Now that the cea mode handling is not 100% tied to the single array the dummy VIC 0 mode is pretty much pointles. Throw it out. v2: Rebase Cc: Tom Anderson <thomasanderson@google.com> Cc: Hans Verkuil <hansverk@cisco.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Add a second table to the cea modes with VIC >= 193. v2: Improve the comment for cea_modes_*[] to indicate that one should always use cea_mode_for_vic() (Tom) Cc: Hans Verkuil <hansverk@cisco.com> Reviewed-by: -
Ville Syrjälä authored
We're going to need two cea mode tables (one for VICs < 128, another one for VICs >= 193). To that end replace the direct edid_cea_modes[] lookups with a function call. And we'll rename the array to edid_cea_modes_0[] to indicate how it's to be indexed. v2: Fix typos (Tom) Drop the pointless NULL checks in the loops (Tom) Assign when declaring (Tom) Improve the comment for cea_modes_*[] to indicate that one should always use cea_mode_for_vic() (Tom) Cc: Tom Anderson <thomasanderson@google.com> Cc: Hans Verkuil <hansverk@cisco.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: -
Gerd Hoffmann authored
v2: remove shift by src_{x,y}, drm_atomic_helper_damage_merged() handles that for us (Chia-I Wu). Signed-off-by:Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20191212125346.8334-4-kraxel@redhat.com
-
Gerd Hoffmann authored
When the driver submits multiple commands in a row it makes sense to notify the host only after submitting the last one, so the host can process them all at once, with a single vmexit. Add functions to enable/disable notifications to allow that. Use the new functions for primary plane updates. Signed-off-by:
-
Gerd Hoffmann authored
v2: also check src rect (Chia-I Wu). Signed-off-by:
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/bochs/bochs_hw.c:258:2-3: Unneeded semicolon Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/1576468459-67216-1-git-send-email-zhengbin13@huawei.comSigned-off-by:
-
Hans de Goede authored
Instead of only setting mode->specified on false on an early exit and leaving e.g. mode->bpp_specified and mode->refresh_specified as is, lets be consistent and just zero out the entire passed in struct at the top of drm_mode_parse_command_line_for_connector() Changes in v3: -Drop "mode->specified = false;" line instead of the "return false;" (oops) This crasher was reported-by: kernel test robot <lkp@intel.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-11-hdegoede@redhat.com
-
Hans de Goede authored
fb_get_options() will return fb_mode_option if no video=<connector-name> argument is present on the kernel commandline, so there is no need to also do this in drm_mode_parse_command_line_for_connector() as our only caller uses fb_get_options() to get the mode_option argument. Changes in v2: -Split out the changes dealing with the initialization of the mode struct into a separate patch Acked-by:
-
Hans de Goede authored
Sometimes we want to override a connector's panel_orientation from the kernel commandline. Either for testing and for special cases, e.g. a kiosk like setup which uses a TV mounted in portrait mode. Users can already specify a "rotate" option through a video= kernel cmdline option. But that only supports 0/180 degrees (see drm_client_modeset TODO) and only works for in kernel modeset clients, not for userspace kms users. The "panel-orientation" connector property OTOH does support 90/270 degrees as it leaves dealing with the rotation up to userspace and this does work for userspace kms clients (at least those which support this property). Changes in v2: -Add missing ':' after @panel_orientation (reported by kbuild test robot) BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83Acked-by:
-
Hans de Goede authored
Some options which can be specified on the commandline, such as margin_right=..., margin_left=..., etc. are applied not only to the specified mode, but to all modes. As such it would be nice if the user can simply say e.g. video=HDMI-1:margin_right=14,margin_left=24,margin_bottom=36,margin_top=42 This commit refactors drm_mode_parse_command_line_for_connector() to add support for this, and as a nice side effect also cleans up the function a bit. Acked-by:
-
Hans de Goede authored
drm_connector_get_cmdline_mode() calls drm_mode_parse_command_line_for_connector() with &connector->cmdline_mode as mode argument, so anything which we store in the mode arguments gets kept even if we return false. Avoid storing a possibly false-postive bpp/refresh_specified setting in connector->cmdline_mode by moving the setting of these to after successful parsing of the bpp/refresh parts of the video= argument. Acked-by:
-
Hans de Goede authored
Add a freestanding function argument to drm_mode_parse_cmdline_options() similar to how drm_mode_parse_cmdline_extra() already has this. This is a preparation patch for allowing parsing of stand-alone options without a mode before them, e.g.: video=HDMI-1:margin_right=14,... Acked-by:
-
Hans de Goede authored
Refactor drm_mode_parse_cmdline_options() so that it takes a pointer to the first option, rather then a pointer to the ',' before the first option. This is a preparation patch for allowing parsing of stand-alone options without a mode before them, e.g.: video=HDMI-1:margin_right=14,... Acked-by:
-
Hans de Goede authored
Before this commit it was impossible to combine an extra mode argument specified directly after the resolution with an option, e.g. video=HDMI-1:720x480e,rotate=180 would not work, either the "e" to force enable would need to be dropped or the ",rotate=180", otherwise the mode_option would not be accepted. This commit fixes this by setting parse_extras to true in this case, so that drm_mode_parse_cmdline_res_mode() parses the extra arguments directly after the resolution. Acked-by:
-
Hans de Goede authored
Before this commit it was impossible to add an extra mode argument after a bpp or refresh specifier, combined with an option, e.g. video=HDMI-1:720x480-24e,rotate=180 would not work, either the "e" to force enable would need to be dropped or the ",rotate=180", otherwise the mode_option would not be accepted. This commit fixes this by fixing the length calculation if extras_ptr is set to stop the extra parsing at the start of the options (stop at the ',' options_ptr points to). Acked-by:
-
Hans de Goede authored
We are not supposed to modify the passed in string, make char pointers used in drm_mode_parse_cmdline_options() const char * where possible. Acked-by:
-
Hans de Goede authored
Before this commit, if the last option of a video=... option is for example "rotate" without a "=<value>" after it then delim will point to the terminating 0 of the string, and value which is sets to <delim + 1> will point one position past the end of the string. This commit fixes this by enforcing that the contents of delim equals '=' as it should be for options which take a value, this check is done in a new drm_mode_parse_cmdline_int helper function which factors out the common integer parsing code for all the options which take an int. Acked-by:
-
Heiko Stuebner authored
Add the compatible and GRF definitions for the PX30 soc. changes in v5: - rebased on top of 5.5-rc1 - merged with dsi timing change to prevent ordering conflicts Signed-off-by:
Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-7-heiko@sntech.de
-
Heiko Stuebner authored
The px30 SoC also uses a dw-mipi-dsi controller, so add the compatible value for it. changes in v5: - rebased on top of 5.5-rc1 - merged with dsi timing change to prevent ordering conflicts Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-6-heiko@sntech.de
-
Heiko Stuebner authored
While the common case is that the dsi controller uses an internal dphy, accessed through the phy registers inside the dsi controller, there is also the possibility to use a separate dphy from a different vendor. One such case is the Rockchip px30 that uses a Innosilicon Mipi dphy, so add the support for handling such a constellation, including the pll also getting generated inside that external phy. changes in v5: - rebased on top of 5.5-rc1 - merged with dsi timing change to prevent ordering conflicts Signed-off-by:
-
Heiko Stuebner authored
Some dw-mipi-dsi instances in Rockchip SoCs use external dphys. In these cases the needs clock will also be generated externally so these don't need the ref-clock as well. changes in v5: - rebased on top of 5.5-rc1 - merged with dsi timing change to prevent ordering conflicts Signed-off-by:
-
Heiko Stuebner authored
If implementation-specific phy_ops need to be defined they probably should be enabled before trying to talk to the panel and disabled only after the panel was disabled. Right now they are enabled last and disabled first, so might make it impossible to talk to some panels - example for this being the px30 with an external Innosilicon dphy that needs the phy to be enabled to transfer commands to the panel. So move the calls appropriately. changed in v5: - rebased on top of 5.5-rc1 - merged with dsi timing change to prevent ordering conflicts Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Reviewed-by:
Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-3-heiko@sntech.de
-
Heiko Stuebner authored
The timing values for dw-dsi are often dependent on the used display and according to Philippe Cornu will most likely also depend on the used phy technology in the soc-specific implementation. To solve this and allow specific implementations to define them as needed add a new get_timing callback to phy_ops and call this from the dphy_timing function to retrieve the necessary values for the specific mode. Right now this handles the hs2lp + lp2hs where Rockchip SoCs need handling according to the phy speed, while STM seems to be ok with static values. changes in v5: - rebase on 5.5-rc1 - merge into px30 dsi series to prevent ordering conflicts changes in v4: - rebase to make it directly fit on top of drm-misc-next after all changes in v3: - check existence of phy_ops->get_timing in __dw_mipi_dsi_probe() - emit actual error when get_timing() call fails - add tags from Philippe and Yannick changes in v2: - add driver-specific handling, don't force all bridge users to use the same timings, as suggested by Philippe Suggested-by:
-
Jyri Sarha authored
Remove obsolete bundled tfp410 driver with its "ti,tilcdc,tfp410" devicetree binding. No platform has ever used this driver in the mainline kernel and if anybody connects tfp410 to tilcdc he or she should use the generic drm tfp410 bridge driver. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e2db6c328467cc51e8d633ecb0ffa7c5736f2e8.1575901747.git.jsarha@ti.com
-
- 14 Dec, 2019 8 commits
-
-
Paul Cercueil authored
The LCD controller in the JZ4770 supports up to 720p. While there has been many new features added since the old JZ4740, which are not yet handled here, this driver still works fine. v2: No change Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-6-paul@crapouillou.net # *** extracted tags *** Acked-by:
-
Paul Cercueil authored
Check that the requested display size isn't above the limits supported by the CRTC. - JZ4750 and older support up to 800x600; - JZ4755 supports up to 1024x576; - JZ4760 and JZ4770 support up to 720p; - JZ4780 supports up to 2k. v2: No change Signed-off-by:
-
Paul Cercueil authored
While the LCD controller can effectively only support a maximum resolution of 800x600, the framebuffer's height can be much higher, since we can change the Y start offset. v2: No change Signed-off-by:
-
Paul Cercueil authored
Instead of obtaining the width/height of the framebuffer from the CRTC state, obtain it from the current plane state. v2: No change Signed-off-by:
-
Paul Cercueil authored
It is possible that there is no drm_framebuffer associated with a given plane state. v2: Handle drm_plane->state which can be NULL too Signed-off-by:
-
Paul Cercueil authored
Add a compatible string for the LCD controller found in the JZ4770 SoC. v2: No change Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/sun4i/sun4i_layer.c:253:3-4: Unneeded semicolon drivers/gpu/drm/sun4i/sun4i_layer.c:257:2-3: Unneeded semicolon Reported-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/1576317091-24968-3-git-send-email-zhengbin13@huawei.com
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/sun4i/sun8i_mixer.c:289:3-4: Unneeded semicolon drivers/gpu/drm/sun4i/sun8i_mixer.c:292:2-3: Unneeded semicolon drivers/gpu/drm/sun4i/sun8i_mixer.c:302:3-4: Unneeded semicolon drivers/gpu/drm/sun4i/sun8i_mixer.c:305:2-3: Unneeded semicolon Reported-by:
-
