This is a requirement for ancient gcc's

So poor old Dave spent days hunting down memory corruption because the
`kstat' per-cpu storage is not initialised (it needs to be, it's a workaround
for ancient gcc's).

The same problem had me hunting for a day too.

This patch, based on an initial version from Rusty will
parse System.map at final link and will fail the build if
any per-cpu symbols are found to be not in the percpu section.

egcs-1.1.2 doesn't understand that form of vararg macro

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

This adds the KT400 pci ID and lists it as using Via generic setup
routines.  This patch has been tested with all GL xscreensavers I could
find, and been reviewed by Dave Jones (full patch history at
http://bugzilla.kernel.org/show_bug.cgi?id=3D14).

diff -uNr linux-2.5.47-ac6.orig/drivers/char/agp/agp.c
linux-2.5.47-ac6/drivers/char/agp/agp.c

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

Support more flexible child pid set/clear operations for NPTL.

there's one more improvement in the interface: set the parent-TID prior
doing the copy_mm() - this helps cfork() to pass the TID to the child as
well.

Very recent Athlons (Model 8 stepping 1 and above) (XPs/MPs and mobiles)
have an interesting problem.  Certain bits in the CLK_CTL register need
to be programmed differently to those in earlier models. The problem arises
when people plug these new CPUs into boards running BIOSes that are unaware
of this fact.

The fix is to reprogram CLK_CTL to 200xxxxx instead of 0x600xxxxx as it was
in previous models. The AMD folks have found that this improves stability.

The patch below does this reprogramming if an affected model/bios is
detected.

I'm interested if someone with an affected model could run some
benchmarks before and after to also see if this affects performance.

uClinux ports can't use mmu tricks for reading /dev/zero due to the
lack of one.  similarly it can't mmap /dev/zero.

We must always use total_swapcache_pages instead of
swapper_space.nrpages in code that doesn't depend on CONFIG_SWAP

also fix a bug in hammerfall driver, removing __exit from a function
that is called from a non __exit function.

also convert some struct initializations to C99 style and change
irq_count to tcic_irq_count, as irq_count now is a macro...

and also makes a var go to .bss...

Some names (for some reason) have a '/' in them, making them no good for directory
names. disk->kobj.name has already been transformed to turn those into '!', so this
makes sure we use those when setting the name for the partitions' names.

- don't define and use a release callback for the generic driver. 

- Call bus_unregister() in usb_exit() to remove the usb driver, instead of put_bus().

Like the other objects, this allows a decent bit of cleanup. Details include:

- use rwsem in subsytem, instead of one in struct device_class.

- use refcount in struct kobject, instead of one in struct device_class.

- kill class's present flag. 

- kill class_list, since we can just use class_subsys's. 

- make interfaces instances of their class's subsystem. This allows us to 
kill struct device_class::intf_list, and struct device_interface::node.

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-kobject

This a multi-pronged attack aimed at exploiting the kobject infrastructure mor. 

- Remove bus_driver_list, in favor of list in bus_subys.

- Remove bus_for_each_* and driver_for_each_dev(). They're not being used by
anyone, have questionable locking semantics, and really don't provide that
much use, as the function returns once the callback fails, with no indication
of where it failed. Forget them, at least for now. 

- Make sure that we return success from bus_match() if device matches, but
doesn't have a probe method.

- Remove extraneous get_{device,driver}s from bus routines that are serialized
by the bus's rwsem. bus_{add,remove}_{device,driver} all take the rwsem, so there 
is no way we can get a non-existant object when in those functions.

- Use the rwsem in the struct subsystem the bus has embedded in it, and kill the
separate one in struct bus_type.

- Move bulk of driver_register() into bus_add_driver(), which holds the bus's
rwsem during the entirety. this will prevent the driver from being unloaded while
it's being registered, and two drivers with the same name getting registered
at the same time. 

- Ditto for driver_unregister() and bus_remove_driver().

- Add driver_release() method for the driver bus driver subsystems. (Explained later)

- Use only the refcounts in the buses' kobjects, and kill the one in struct bus_type.

- Kill struct bus_type::present and struct device_driver::present. These didn't 
work out the way we intended them to. The idea was to not let a user obtain a 
rerference count to the object if it was in the process of being unregistered. 
All the code paths should be fixed now such that their registration is protected with
a semaphore, so no partially initialized objects can be removed, and enough 
infrastructure is moved to the kobject model so that once the object is publically
visible, it should be usable by other sources.

- Add a bus_sem to serialize bus registration and unregistration. 

- Add struct device_driver::unload_sem to prevent unloading of drivers 
with a positive reference count.

The driver model has always had a bug that would allow a driver with a 
positive reference count to be unloaded. It would decrement the reference 
count and return, letting the module be unloaded, without accounting for 
the other users of the object. This has been discussed many times, though 
never resolved cleanly. This should fix the problem in the simplest manner.

struct device_driver gets unload_sem, which is initialized to _locked_. When
the reference count for the driver reaches 0, the semaphore is unlocked.
driver_unregister() blocks on acquiring this lock before it exits. In the 
normal case that driver_unregister() drops the last reference to the driver,
the lock will be acquired immediately, and the module will unload. 

In the case that someone else is using the driver object, driver_unregister()
will not be able to acquire the lock, since the refcount has not reached 0,
and the lock has not been released. 

This means that rmmod(8) will block while drivers' sysfs files are open. 
There are no sysfs files for drivers yet, but note this when they do have 
some.

- Don't do extra dget() when creating symlink. 
This is a long-standing bug with a simple and obvious fix. We were doing 
an extra dget() on the dentry after d_instantiate(). It only gets decremented
once on removal, so the dentry was never really going away, and the directory
wasn't, either. 

- Use simple_unlink() instead of sysfs_unlink().

- Use simple_rmdir() instead of our own, unrolled, version. 

- Remove MODULE_LICENSE(), since it's always in the kernel. 

into nuts.ninka.net:/home/davem/src/BK/net-2.5

into nuts.ninka.net:/home/davem/src/BK/sparc-2.5

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-kobject

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-kobject

into home.transmeta.com:/home/torvalds/v2.5/linux

into mulgrave.(none):/home/jejb/BK/scsi-for-linus-2.5

On Sun, Nov 17, 2002 at 11:54:49PM +0100, Christoph Hellwig wrote:

> --- 1.46/drivers/scsi/scsi_lib.c	Thu Nov 14 18:09:17 2002
> +++ edited/drivers/scsi/scsi_lib.c	Sun Nov 17 21:37:05 2002
> @@ -7,50 +7,18 @@
>   *                        of people at Linux Expo.
>   */
>
> -/*
> - * The fundamental purpose of this file is to contain a library of utility
> - * routines that can be used by low-level drivers.   Ultimately the idea
> - * is that there should be a sufficiently rich number of functions that it
> - * would be possible for a driver author to fashion a queueing function for
> - * a low-level driver if they wished.   Note however that this file also
> - * contains the "default" versions of these functions, as we don't want to
> - * go through and retrofit queueing functions into all 30 some-odd drivers.
> - */
> -
> -#include <linux/module.h>
> -
> -#include <linux/sched.h>
> -#include <linux/timer.h>
>  #include <linux/string.h>
>  #include <linux/slab.h>
>  #include <linux/bio.h>
> -#include <linux/ioport.h>
>  #include <linux/kernel.h>
> -#include <linux/stat.h>
>  #include <linux/blk.h>
> -#include <linux/interrupt.h>
> -#include <linux/delay.h>
> -#include <linux/smp_lock.h>
>  #include <linux/completion.h>
>
> -
> -#define __KERNEL_SYSCALLS__
> -
> -#include <linux/unistd.h>

I had to add back the smp_lock.h include to compile with CONFIG_PREEMPT,
as kernel_locked was not defined and is used by in_atomic().

Patch against the latest scsi-misc-2.5:

Fix is to only plug on prep deferral if the device queue is empty
(otherwise we can rely on returning I/O to restart the queue)