- 14 Aug, 2013 7 commits
-
-
Laurent Pinchart authored
Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Laurent Pinchart authored
Name the DU clock input 1 consistently with clock inputs 0 and 2. Signed-off-by:
-
Linus Walleij authored
Print out the affected group name on activation of pin mux settings, and warn if you cannot free a pin that should have been part of a certain setting. ChangeLog v1->v2: - Also print the pin name in the error messages. Cc: Sonic Zhang <sonic.zhang@analog.com> Reviewed-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Laxman Dewangan authored
TI Palmas series Power Management IC have multiple pins which can be configured for different functionality. This pins can be configured for different function. Also their properties like pull up/down, open drain enable/disable are configurable. Add support for pincontrol driver Palmas series device like TPS65913, TPS80036. The driver supports to be register from DT only. Changes from V1: - Add generic property for pins and functions in pinconf-generic. - Add APIs to map the DT and subnode. - Move common utils APIs to the pinctrl-utils from this file. - Update the binding document accordingly. Changes from V2: - Add ack by Lee. - Correct the binding docs. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
-
Laxman Dewangan authored
Add generic APIs to map the DT node and its sub node in pinconf generic driver. These APIs can be used from driver to parse the DT node who uses the pinconf generic APIs for defining their nodes. Changes from V1: - Add generic property for pins and functions in pinconf-generic. - Add APIs to map the DT and subnode. - Move common utils APIs to the pinctrl-utils from this file. - Update the binding document accordingly. Changes from V2: - Rebased the pinctrl binding doc on top of Stephen's cleanup. - Rename properties "pinctrl-pins" and "pinctrl-function" to "pins" and "function". Signed-off-by:
-
Laxman Dewangan authored
Some of pincontrol driver needs the utility function to create map list. The utility function needed for adding mux, configs etc. In place of duplicating this in each driver, add the common utility function in common file and use from device specific driver. This will reduce the duplicating of code across drivers. Changes from V1: - Add this files in this patch and add common utility APIs to here. Changes from V2: - Nothing in code. - Added Reviewed by Stephen. Signed-off-by:
-
Sonic Zhang authored
One peripheral may share part of its pins with the 2nd peripheral and the other pins with the 3rd. If it requests all pins when part of them has already be requested and owned by the 2nd peripheral, this request fails and pinmux_disable_setting() is called. The pinmux_disable_setting() frees all pins of the first peripheral without checking if the pin is owned by itself or the 2nd, which results in the malfunction of the 2nd peripheral driver. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
- 07 Aug, 2013 13 commits
-
-
Linus Walleij authored
The pin control subsystem was created to do away with custom pin control APIs such as this one. It was kept for backward-compatibility but is completely unused in the current kernel, so let's delete it. Signed-off-by: -
Stephen Warren authored
pinctrl bindings can benefit from generic property names that define which pins a "pin configuration node" affects, and which mux function to select onto those pins. Document new properties for this purpose so that other bindings may refer to them. Signed-off-by:
-
Jingoo Han authored
Added missing __iomem annotation in order to fix the following sparse warnings: drivers/pinctrl/sirf/pinctrl-sirf.c:846:14: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/sirf/pinctrl-sirf.c:846:14: expected void *regs drivers/pinctrl/sirf/pinctrl-sirf.c:846:14: got void [noderef] <asn:2>* drivers/pinctrl/sirf/pinctrl-sirf.c:869:33: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/sirf/pinctrl-sirf.c:869:33: expected void [noderef] <asn:2>*regs drivers/pinctrl/sirf/pinctrl-sirf.c:869:33: got void *regs drivers/pinctrl/sirf/pinctrl-sirf.c:909:17: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/sirf/pinctrl-sirf.c:909:17: expected void volatile [noderef] <asn:2>*addr drivers/pinctrl/sirf/pinctrl-sirf.c:909:17: got void *regs Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Jingoo Han authored
Fix the following sparse warning: drivers/pinctrl/pinconf.c:521:20: error: incompatible types in comparison expression (different type sizes) Signed-off-by:
-
Stephen Warren authored
Reword the section of pinctrl-bindings.txt that describes generic properties that pinctrl bindings may use. The aim is to make the text clearer, and more explicitly call out the responsibility of individual bindings that use the generic properties to define which of the properties are used, and how. Signed-off-by:
-
Boris BREZILLON authored
The current implementation handle both edge and level interrupts with the 'handle_simple_irq' handler. Level interrupts are active as long as the pin stays at the configured level (low or high). In this case we have to use 'handle_level_irq' which mask the interrupt until the handle has treated it. Signed-off-by:
Boris BREZILLON <b.brezillon@overkiz.com> Tested-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Sachin Kamat authored
Symbols used only in this file are made static. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by:
-
Sachin Kamat authored
devm_request_and_ioremap is deprecated. Use devm_ioremap_resource instead. Signed-off-by:
-
Shawn Guo authored
The select input for some pin may not be implemented using the regular select input register but the general purpose register. A real example is that imx6q designers found the select input for USB OTG ID pin is missing at the very late stage, and can not add a new select input register but have to use a general purpose register bit to implement it. The patch adds a workaround for such select input quirk by interpreting the input_val cell of pin function ID in a different way, so that all the info that needed for setting up select input bits in general purpose register could be decoded from there. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Tested-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Sachin Kamat authored
*map should be tested for NULL instead of map as kmalloc pointer is assigned to it. This also fixes a potential null pointer dereference bug later in the code. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Russell King - ARM Linux authored
So, I notice that we get a couple of warnings from the pinctrl code: drivers/pinctrl/pinconf.c: In function 'pinconf_dbg_config_print': drivers/pinctrl/pinconf.c:433:36: warning: 'configs' may be used uninitialized in this function drivers/pinctrl/pinconf.c: In function 'pinconf_dbg_config_write': drivers/pinctrl/pinconf.c:511:36: warning: 'configs' may be used uninitialized in this function While the compiler might not be able to work out that "configs" is safe, the code doesn't lend itself very well to identifying that fact when reading it either. This can be trivially solved by a slight restructuring of the code - which also reduces the LOC. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Wolfram Sang authored
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Heiko Stübner authored
The correct header to include for clock handling is clk.h . clk-provider.h should not be used in simple clock consumers. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
- 29 Jul, 2013 20 commits
-
-
git://linuxtv.org/pinchartl/fbdevLinus Walleij authored
Signed-off-by: -
git://linuxtv.org/pinchartl/fbdevLinus Walleij authored
Signed-off-by: -
Shinobu Uehara authored
Signed-off-by:
Shinobu Uehara <shinobu.uehara.xc@renesas.com> Signed-off-by:
Ryo Kataoka <ryo.kataoka.wt@renesas.com> Signed-off-by:
-
Shinobu Uehara authored
Signed-off-by:
Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by: -
Kunihito Higashiyama authored
Signed-off-by:
Kunihito Higashiyama <kunihito.higashiyama.ur@renesas.com> Signed-off-by:
-
Laurent Pinchart authored
Navigating through the source code is hard enough without having to manually search for groups and functions. Signed-off-by: -
Shinya Kuribayashi authored
Fix erroneous entries in the pinmux configuration tables that affect HSCIF, I2C, LBSC, SCIF, SSI and VIN operation. Signed-off-by:
-
Shinya Kuribayashi authored
Update the pinmux configuration tables to support the SCIF2 pins (TX2/TX2_B, RX2/RX2_B, SCK2). Signed-off-by:
-
Shinya Kuribayashi authored
Update the pinmux configuration tables to support the TCLK1 pin. Signed-off-by:
-
Shinya Kuribayashi authored
The SCIFA2 RXD_B and HRX0_C pins have their pinmux configuration data swapped, fix it. Signed-off-by:
-
Shinya Kuribayashi authored
The pins have been removed from the datasheet, remove them here as well. Signed-off-by:
-
Shinya Kuribayashi authored
The pins have been removed from the datasheet, remove them here as well. Signed-off-by:
-
Shinya Kuribayashi authored
The pins have been removed from the datasheet, remove them here as well. Signed-off-by:
-
Shinya Kuribayashi authored
The RTS/CTS pins have been renamed in the datasheet, rename them here as well. Signed-off-by:
-
Shinya Kuribayashi authored
The I2C pins have been renamed in the datasheet, rename them here as well. Signed-off-by:
-
Phil Edworthy authored
Add all I2C pin groups to R8A7779 PFC driver. Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
-
Laurent Pinchart authored
The macros expand to irq_pin() calls and where most probably introduced from a copy&paste of the sh7372 PFC data. Replace them with irq_pin(). Signed-off-by:
Magnus Damm <damm@opensource.se>
-
Laurent Pinchart authored
The mach/irqs.h header is included only to get the evt2irq macro definition. The macro is defined in linux/sh_intc.h, include it directly instead of the mach-specific header. Signed-off-by:
-
Laurent Pinchart authored
The SoC-specific mach/<soc>.h headers are included needlesly. Don't include them. Signed-off-by:
-
