xprt_disconnect() should really only be called when the transport shutdown
is completed, and it is time to wake up any pending tasks. Rename it to
xprt_disconnect_done() in order to reflect the semantical change.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Move the calls to xprt_disconnect() over to xprt_force_disconnect() in
order to enable the transport layer to manage the state of the
XPRT_CONNECTED flag.
Ditto in xs_tcp_read_fraghdr().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The transport layer should do that itself whenever appropriate.

Note that the RDMA transport already assumes that it needs to call
xprt_disconnect in xprt_rdma_close().
For TCP sockets, we want to call xprt_disconnect() only after the
connection has been closed by both ends.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

By using shutdown() rather than close() we allow the RPC client to wait
for the TCP close handshake to complete before we start trying to reconnect
using the same port.
We use shutdown(SHUT_WR) only instead of shutting down both directions,
however we wait until the server has closed the connection on its side.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Add an xprt->state bit to enable the TCP ->state_change() method to signal
whether or not the TCP connection is in the process of closing down.
This will to be used by the reconnection logic in a separate patch.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Currently the TCP rebinding logic assumes that if we're not using a
reserved port, then we don't need to reconnect on the same port if a
disconnection event occurs. This breaks most RPC duplicate reply cache
implementations.

Also take into account the fact that xprt_min_resvport and
xprt_max_resvport may change while we're reconnecting, since the user may
change them at any time via the sysctls. Ensure that we check the port
boundaries every time we loop in xs_bind4/xs_bind6. Also ensure that if the
boundaries change, we only scan the ports a maximum of 2 times.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

When scheduling the autoclose RPC call, we want to ensure that we don't
race against the test_bit() call in xprt_clear_locked().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Added an active/deactive mechanism to the nfs_server structure
allowing async operations to hold off umount until the
operations are done.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Reduce the time spent locking the rpc_sequence structure by queuing the
nfs_seqid only when we are ready to take the lock (when calling
nfs_wait_on_sequence).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Ensure that we set/clear NFS_PAGE_TAG_LOCKED when the nfs_page is hashed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The current model locks the page twice for no good reason. Optimise by
inlining the parts of nfs_write_begin()/nfs_write_end() that we care about.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

If the server returns an ENOENT error, we still need to do a d_delete() in
order to ensure that the dentry is deleted.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

In nfs_do_call_unlink() we check that we haven't raced, and that lookup()
hasn't created an aliased dentry to our sillydeleted dentry. If somebody
has deleted the file on the server and the lookup() resulted in a negative
dentry, then ignore...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Ensure that readdir revalidates its data cache after blocking on
sillyrename.

Also fix a typo in nfs_do_call_unlink(): swap the ^= for an |=. The result
is the same, since we've already checked that the flag is unset, but it
makes the code more readable.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The new e1000e driver is apparently not yet suitable for general use, so
mark it experimental, and re-instate all the PCI-Express device IDs in
the old and stable e1000 driver so that people (namely me) can continue
to use a driver that actually works.

Auke & co have been appraised of the situation.

Cc: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A bug report on nfsd that states that since it was switched to use
splice instead of sendfile, the atime was no longer being updated
on the input file. do_generic_mapping_read() does this when accessing
the file, make splice do it for the direct splice handler.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

For BLOCK_PC requests, we need that length for completing the request.
Andrew Vasquez <andrew.vasquez@qlogic.com> reported the following
oops

Hitting a consistent BUG() with recent Linus' linux-2.6.git:

	[   12.941428] ------------[ cut here ]------------
	[   12.944874] kernel BUG at drivers/block/cciss.c:1260!
	[   12.944874] invalid opcode: 0000 [1] SMP
	[   12.944874] CPU 0
	[   12.944874] Modules linked in:
	[   12.944874] Pid: 0, comm: swapper Not tainted 2.6.24 #43
	[   12.944874] RIP: 0010:[<ffffffff8039e43d>]  [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf
	[   12.944874] RSP: 0018:ffffffff8063aed0  EFLAGS: 00010202
	[   12.944874] RAX: 0000000000000001 RBX: ffff8100cf800010 RCX: ffff81042f1253b0
	[   12.944874] RDX: ffff81042de398f0 RSI: ffff81042de398f0 RDI: 0000000000000001
	[   12.944874] RBP: ffff81042daa0000 R08: ffff81042f1253b0 R09: 0000000000000001
	[   12.944874] R10: 00000000000000fe R11: 0000000000000000 R12: 0000000000000002
	[   12.944874] R13: 0000000000000001 R14: ffff8100cf800000 R15: ffff81042de398f0
	[   12.944874] FS:  0000000000000000(0000) GS:ffffffff805bb000(0000) knlGS:0000000000000000
	[   12.944874] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
	[   12.944874] CR2: 00002afed7eea340 CR3: 000000042dbba000 CR4: 00000000000006e0
	[   12.944874] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
	[   12.944874] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
	[   12.944874] Process swapper (pid: 0, threadinfo ffffffff805f4000, task ffffffff805624a0)
	[   12.944874] Stack:  0000000000000000 ffffffff8063af10 0000000000000001 ffffffff80632d60
	[   12.944874]  0000000000000000 000000000000000a ffffffff805bb900 ffffffff8032038f
	[   12.944874]  ffffffff8063af10 ffffffff8063af10 ffffffff805bb940 ffffffff802346b4
	[   12.944874] Call Trace:
	[   12.944874]  <IRQ>  [<ffffffff8032038f>] blk_done_softirq+0x69/0x78
	[   12.944874]  [<ffffffff802346b4>] __do_softirq+0x6f/0xd8
	[   12.944874]  [<ffffffff8020c45c>] call_softirq+0x1c/0x30
	[   12.944874]  [<ffffffff8020e347>] do_softirq+0x30/0x80
	[   12.944874]  [<ffffffff8020e409>] do_IRQ+0x72/0xd9
	[   12.944874]  [<ffffffff8020a50a>] mwait_idle+0x0/0x46
	[   12.944874]  [<ffffffff8020a3da>] default_idle+0x0/0x3d
	[   12.944874]  [<ffffffff8020b7e1>] ret_from_intr+0x0/0xa
	[   12.944874]  <EOI>  [<ffffffff8020a54c>] mwait_idle+0x42/0x46
	[   12.944874]  [<ffffffff8020a481>] cpu_idle+0x6a/0xae
	[   12.944874]
	[   12.944874]
	[   12.944874] Code: 0f 0b eb fe 48 8d 85 d8 c0 00 00 48 89 04 24 48 89 c7 e8 e5
	[   12.944874] RIP  [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf
	[   12.944874]  RSP <ffffffff8063aed0>
	[   12.944903] ---[ end trace e9c631603f90d22f ]---

which is caused by blk_end_request() returning 'not done' for a request,
since it gets asked to complete zero bytes.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Expose hardware sector size in sysfs queue directory.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

request_queue_t is deprecated
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

struct io_context was not defined, just add an empty forward decl.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Adds files for barrier handling, rq execution, io context handling,
mapping data to requests, and queue settings.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Seperates the tag and sysfs handling from ll_rw_blk.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Then we retain history in blk-core.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

In ace_fsm_dostate(), the variable 'i' was used only for passing
sector size of the request to end_that_request_first().
So I removed it and changed the code to pass the size in bytes
directly to __blk_end_request()
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25: (1470 commits)
  [IPV6] ADDRLABEL: Fix double free on label deletion.
  [PPP]: Sparse warning fixes.
  [IPV4] fib_trie: remove unneeded NULL check
  [IPV4] fib_trie: More whitespace cleanup.
  [NET_SCHED]: Use nla_policy for attribute validation in ematches
  [NET_SCHED]: Use nla_policy for attribute validation in actions
  [NET_SCHED]: Use nla_policy for attribute validation in classifiers
  [NET_SCHED]: Use nla_policy for attribute validation in packet schedulers
  [NET_SCHED]: sch_api: introduce constant for rate table size
  [NET_SCHED]: Use typeful attribute parsing helpers
  [NET_SCHED]: Use typeful attribute construction helpers
  [NET_SCHED]: Use NLA_PUT_STRING for string dumping
  [NET_SCHED]: Use nla_nest_start/nla_nest_end
  [NET_SCHED]: Propagate nla_parse return value
  [NET_SCHED]: act_api: use PTR_ERR in tcf_action_init/tcf_action_get
  [NET_SCHED]: act_api: use nlmsg_parse
  [NET_SCHED]: act_api: fix netlink API conversion bug
  [NET_SCHED]: sch_netem: use nla_parse_nested_compat
  [NET_SCHED]: sch_atm: fix format string warning
  [NETNS]: Add namespace for ICMP replying code.
  ...

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (68 commits)
  [MIPS] remove Documentation/mips/GT64120.README
  [MIPS] Malta: remaining bits of the board support code cleanup
  [MIPS] Malta: make the helper function static
  [MIPS] Malta: fix braces at single statement blocks
  [MIPS] Malta, Atlas: move an extern function declaration to the header file
  [MIPS] Malta: Use C89 style for comments
  [MIPS] Malta: else should follow close brace in malta_int.c
  [MIPS] Malta: remove a superfluous comment
  [MIPS] Malta: include <linux/cpu.h> instead of <asm/cpu.h>
  [MIPS] Malta, Atlas, Sead: remove an extern from .c files
  [MIPS] Malta: fix oversized lines in malta_int.c
  [MIPS] Malta: remove a dead function declaration
  [MIPS] Malta: use tabs not spaces
  [MIPS] Malta: set up the screen info in a separate function
  [MIPS] Malta: check the PCI clock frequency in a separate function
  [MIPS] Malta: use the KERN_ facility level in printk()
  [MIPS] Malta: use Linux kernel style for structure initialization
  [MIPS]: constify function pointer tables
  [MIPS] compat: handle argument endianess of sys32_(f)truncate64 with merge_64
  [MIPS] Cobalt 64-bits kernels can be safely unmarked experimental
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (79 commits)
  Remove references to "make dep"
  kconfig: document use of HAVE_*
  Introduce new section reference annotations tags: __ref, __refdata, __refconst
  kbuild: warn about ld added unique sections
  kbuild: add verbose option to Section mismatch reporting in modpost
  kconfig: tristate choices with mixed tristate and boolean values
  asm-generic/vmlix.lds.h: simplify __mem{init,exit}* dependencies
  remove __attribute_used__
  kbuild: support ARCH=x86 in buildtar
  kconfig: remove "enable"
  kbuild: simplified warning report in modpost
  kbuild: introduce a few helpers in modpost
  kbuild: use simpler section mismatch warnings in modpost
  kbuild: link vmlinux.o before kallsyms passes
  kbuild: introduce new option to enhance section mismatch analysis
  Use separate sections for __dev/__cpu/__mem code/data
  compiler.h: introduce __section()
  all archs: consolidate init and exit sections in vmlinux.lds.h
  kbuild: check section names consistently in modpost
  kbuild: introduce blacklisting in modpost
  ...

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  Module: check to see if we have a built in module with the same name
  module: add module taint on ndiswrapper
  module: fix the module name length in param_sysfs_builtin
  module: make module_address_lookup safe
  module: better OOPS and lockdep coverage for loading modules
  module: Fix gratuitous sprintf in module.c
  module: wait for dependent modules doing init.
  module: Don't report discarded init pages as kernel text.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
  jbd2: sparse pointer use of zero as null
  jbd2: Use round-jiffies() function for the "5 second" ext4/jbd2 wakeup
  jbd2: Mark jbd2 slabs as SLAB_TEMPORARY
  jbd2: add lockdep support
  ext4: Use the ext4_ext_actual_len() helper function
  ext4: fix uniniatilized extent splitting error
  ext4: Check for return value from sb_set_blocksize
  ext4: Add stripe= option to /proc/mounts
  ext4: Enable the multiblock allocator by default
  ext4: Add multi block allocator for ext4
  ext4: Add new functions for searching extent tree
  ext4: Add ext4_find_next_bit()
  ext4: fix up EXT4FS_DEBUG builds
  ext4: Fix ext4_show_options to show the correct mount options.
  ext4: Add EXT4_IOC_MIGRATE ioctl
  ext4: Add inode version support in ext4
  vfs: Add 64 bit i_version support
  ext4: Add the journal checksum feature
  jbd2: jbd2 stats through procfs
  ext4: Take read lock during overwrite case.
  ...

Based upon the 2.4 kernel, the information presented in the
Documentation/mips/GT64120.README file is outdated. Worse,
the document contents are plain misleading nowadays because
the text mentions files and directories, which have been
deleted, moved or restructured for 2.6.

This patch removes the documentation, which is no more valid.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch factors out the code, which handles the Bonito system
controller. The case of not supporting the DMA coherency is handled
separately to make the logic obvious. Besides, a couple of empty
lines added to beautify the code even further.

No functional changes introduced.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

One helper function can become static. This patch adds the needed
keyword.

No functional changes introduced.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch fixes a couple of warnings reported by checkpatch.pl.

No functional changes introduced.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This was compile-tested using default configs for the boards
affected by this change.

This patch does not introduce any functional changes.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>