- 05 May, 2020 31 commits
-
-
Christophe JAILLET authored
It is spurious to call 'clk_disable_unprepare()' when 'clk_prepare_enable()' has not been called yet. Re-order the error handling path to avoid it. Fixes: a4260ea4 ("media: sun4i: Add H3 deinterlace driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: err_exlusive_rate -> err_exclusive_rate] Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Nícolas F. R. A. Prado authored
Add support for RGB888_*, BGR888_* and GBR888_* media bus formats on the source pad of debayer subdevices. Acked-by:
Helen Koike <helen.koike@collabora.com> Co-developed-by:
Vitor Massaru Iha <vitor@massaru.org> Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@protonmail.com> Signed-off-by:
-
Nícolas F. R. A. Prado authored
Add missing RGB888_*, BGR888_* and GBR888_* media bus codes in the vimc_pix_map_list. Since there is no GBR24 pixelformat, use the RGB24 pixelformat for MEDIA_BUS_FMT_GBR888_1X24. Acked-by:
-
Nícolas F. R. A. Prado authored
Change vimc_pix_map_list to allow multiple media bus codes to map to the same pixelformat, making it possible to add media bus codes for which there are no pixelformat. Acked-by:
-
Arnd Bergmann authored
gcc warns about empty array declarations, which we get in this driver when compile-testing without CONFIG_OF: drivers/media/platform/ti-vpe/cal.c:2194:34: warning: array 'cal_of_match' assumed to have one element 2194 | static const struct of_device_id cal_of_match[]; Since all users of this driver do need CONFIG_OF anyway, there is no point in making the array definition conditional to save space, so just remove the #ifdef and move the array up a little. Fixes: 343e89a7 ("[media] media: ti-vpe: Add CAL v4l2 camera capture driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
John Oldman authored
Correct spelling in comment Signed-off-by:
John Oldman <john.oldman@polehill.co.uk> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Steve Longerbeam <slongerbeam@gmail.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: devel@driverdev.osuosl.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Neil Armstrong authored
Add myself as co-maintainer of the Amlogic VDEC driver, and add the missing vdec DT yaml bindings. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Maxime Jourdan authored
The motion compensation reference cache controller allows caching parts of reference frames for faster decoding. Fixes: 00c43088 ("media: meson: vdec: add VP9 decoder support") Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by:
-
Zou Wei authored
Fixes coccicheck warnings: drivers/media/usb/cx231xx/cx231xx-avcore.c:610:3-4: Unneeded semicolon Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zou Wei <zou_wei@huawei.com> Signed-off-by:
-
Koji Matsuoka authored
According to latest H/W manual v1.50, the description of channel number in the VCDT/VCDT2 register is decremented by one. Therefore, this patch fixes it about comment. Signed-off-by:
Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Steve Longerbeam authored
The function imx_media_init_mbus_fmt() initializes the imx subdevice mbus colorimetry to some sane defaults when the subdevice is registered. Currently it guesses at a colorspace based on the passed mbus pixel format. If the format is RGB, it chooses colorspace V4L2_COLORSPACE_SRGB, and if the format is YUV, it chooses V4L2_COLORSPACE_SMPTE170M. While that might be a good guess, it's not necessarily true that a RGB pixel format encoding uses a SRGB colorspace, or that a YUV encoding uses a SMPTE170M colorspace. Instead of making this dubious guess, just default the colorspace to SRGB. Reported-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Johan Jonker authored
A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@ff350000: interrupts: [[0, 9, 4]] is too short arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@ff350000: interrupt-names: ['vdpu'] is too short arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@ff350000: interrupt-names:0: 'vepu' was expected With the conversion of rockchip-vpu.txt to yaml the correct 'interrupt-names' for rk3328 was not included, so add them now. Also add 'minItems' to 'interrupts'for the completeness. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-vpu.yaml Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Signed-off-by:
-
Dafna Hirschfeld authored
In selfpath, RGB capture formats are received in the sink pad as YUV and are converted to RGB only when writing to memory. So the validation function should accept YUV bus formats with RGB capture encoding. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
RGB formats in selfpath should receive input format as YUV422. The resizer input format is always YUV422 and therefore if the capture format is RGB, the resizer should not change the YUV rations. Signed-off-by:
-
Dafna Hirschfeld authored
The statement "if (rsz->fmt_type == V4L2_PIXEL_ENC_YUV)" can be removed since the value of rsz->fmt_type is either V4L2_PIXEL_ENC_YUV or V4L2_PIXEL_ENC_BAYER and the function returns if it is bayer. In addition some doc with clarification is added. Signed-off-by:
-
Dafna Hirschfeld authored
Currently the format info of the capture is retrieved by calling the function v4l2_format_info. This is not needed since it is already saved in the capture object. Signed-off-by:
-
Sakari Ailus authored
There have been cases where seemingly innocuous patches have broken the uAPI by changing the memory layout of the parameter struct. Generally such changes also introduce a change in the size of the entire struct. This patch adds a sanity check to avoid such cases happening in the future. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by:
Tested-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Sakari Ailus authored
Move the alignment attribute of struct ipu3_uapi_awb_fr_config_s to the field in struct ipu3_uapi_4a_config, the other location where the struct is used. Fixes: commit c9d52c11 ("media: staging: imgu: Address a compiler warning on alignment") Reported-by:
Tomasz Figa <tfiga@chromium.org> Tested-by:
-
Sakari Ailus authored
This reverts commit c9d52c11. The patch being reverted changed the memory layout of struct ipu3_uapi_acc_param. Revert it, and address the compiler warning issues in further patches. Fixes: commit c9d52c11 ("media: staging: imgu: Address a compiler warning on alignment") Reported-by:
-
Sakari Ailus authored
Add Bingbu Cao and Tian Shu Qiu as reviewers for the IPU3 ImgU driver. Signed-off-by:
-
Bingbu Cao authored
Add some explanation of the ImgU running mode and add more information about firmware selection and running mode usage. Signed-off-by:
-
Tomasz Figa authored
When queuing parameters fails, current code bails out without deleting the corresponding vb2 buffer from the driver buffer list, but the buffer is returned to vb2. This leads to stale list entries and a crash when the driver stops streaming: [ 224.935561] ipu3-imgu 0000:00:05.0: set parameters failed. [ 224.998932] ipu3-imgu 0000:00:05.0: set parameters failed. [ 225.064430] ipu3-imgu 0000:00:05.0: set parameters failed. [ 225.128534] ipu3-imgu 0000:00:05.0: set parameters failed. [ 225.194945] ipu3-imgu 0000:00:05.0: set parameters failed. [ 225.360363] ------------[ cut here ]------------ [ 225.360372] WARNING: CPU: 0 PID: 6704 at drivers/media/common/videobuf2/videobuf2-core.c:927 vb2_buffer_done+0x20f/0x21a [videobuf2_common] [ 225.360374] Modules linked in: snd_seq_dummy snd_seq snd_seq_device veth bridge stp llc tun nf_nat_tftp nf_conntrack_tftp nf_nat_ftp nf_conntrack_ftp esp6 ah6 ip6t_REJECT ip6t_ipv6header cmac rfcomm uinput ipu3_imgu(C) ipu3_cio2 iova videobuf2_v4l2 videobuf2_common videobuf2_dma_sg videobuf2_memops ov13858 ov5670 v4l2_fwnode dw9714 acpi_als xt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_light_prox cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf industrialio cros_ec_sensorsupport cdc_ether btusb btrtl btintel btbcm usbnet bluetooth ecdh_generic ecc hid_google_hammer iwlmvm iwl7000_mac80211 r8152 mii lzo_rle lzo_compress iwlwifi zram cfg80211 joydev [ 225.360400] CPU: 0 PID: 6704 Comm: CameraDeviceOps Tainted: G C 5.4.30 #5 [ 225.360402] Hardware name: HP Soraka/Soraka, BIOS Google_Soraka.10431.106.0 12/03/2019 [ 225.360405] RIP: 0010:vb2_buffer_done+0x20f/0x21a [videobuf2_common] [ 225.360408] Code: 5e 41 5f 5d e9 e0 16 5a d4 41 8b 55 08 48 c7 c7 8f 8b 5c c0 48 c7 c6 36 9a 5c c0 44 89 f9 31 c0 e8 a5 1c 5b d4 e9 53 fe ff ff <0f> 0b eb a3 e8 12 d7 43 d4 eb 97 0f 1f 44 00 00 55 48 89 e5 41 56 [ 225.360410] RSP: 0018:ffff9468ab32fba8 EFLAGS: 00010297 [ 225.360412] RAX: ffff8aa7a51577a8 RBX: dead000000000122 RCX: ffff8aa7a51577a8 [ 225.360414] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8aa7a5157400 [ 225.360416] RBP: ffff9468ab32fbd8 R08: ffff8aa64e47e600 R09: 0000000000000000 [ 225.360418] R10: 0000000000000000 R11: ffffffffc06036e6 R12: dead000000000100 [ 225.360420] R13: ffff8aa7820f1940 R14: ffff8aa7a51577a8 R15: 0000000000000006 [ 225.360422] FS: 00007c1146ffd700(0000) GS:ffff8aa7baa00000(0000) knlGS:0000000000000000 [ 225.360424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 225.360426] CR2: 00007aea3473a000 CR3: 00000000537d6004 CR4: 00000000003606f0 [ 225.360427] Call Trace: [ 225.360434] imgu_return_all_buffers+0x6f/0x8e [ipu3_imgu] [ 225.360438] imgu_vb2_stop_streaming+0xd6/0xf0 [ipu3_imgu] [ 225.360441] __vb2_queue_cancel+0x33/0x22d [videobuf2_common] [ 225.360443] vb2_core_streamoff+0x16/0x78 [videobuf2_common] [ 225.360448] __video_do_ioctl+0x33d/0x42a [ 225.360452] video_usercopy+0x34a/0x615 [ 225.360455] ? video_ioctl2+0x16/0x16 [ 225.360458] v4l2_ioctl+0x46/0x53 [ 225.360462] do_vfs_ioctl+0x50a/0x787 [ 225.360465] ksys_ioctl+0x58/0x83 [ 225.360468] __x64_sys_ioctl+0x1a/0x1e [ 225.360470] do_syscall_64+0x54/0x68 [ 225.360474] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 225.360476] RIP: 0033:0x7c118030f497 [ 225.360479] Code: 8a 66 90 48 8b 05 d1 d9 2b 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 d9 2b 00 f7 d8 64 89 01 48 [ 225.360480] RSP: 002b:00007c1146ffa5a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 225.360483] RAX: ffffffffffffffda RBX: 00007c1140010018 RCX: 00007c118030f497 [ 225.360484] RDX: 00007c114001019c RSI: 0000000040045613 RDI: 000000000000004c [ 225.360486] RBP: 00007c1146ffa700 R08: 00007c1140010048 R09: 0000000000000000 [ 225.360488] R10: 0000000000000000 R11: 0000000000000246 R12: 00007c11400101b0 [ 225.360489] R13: 00007c1140010200 R14: 00007c1140010048 R15: 0000000000000001 [ 225.360492] ---[ end trace 73625ecfbd1c930e ]--- [ 225.360498] general protection fault: 0000 [#1] PREEMPT SMP PTI [ 225.360501] CPU: 0 PID: 6704 Comm: CameraDeviceOps Tainted: G WC 5.4.30 #5 [ 225.360502] Hardware name: HP Soraka/Soraka, BIOS Google_Soraka.10431.106.0 12/03/2019 [ 225.360505] RIP: 0010:imgu_return_all_buffers+0x52/0x8e [ipu3_imgu] [ 225.360507] Code: d4 49 8b 85 70 0a 00 00 49 81 c5 70 0a 00 00 49 39 c5 74 3b 49 bc 00 01 00 00 00 00 ad de 49 8d 5c 24 22 4c 8b 30 48 8b 48 08 <49> 89 4e 08 4c 89 31 4c 89 20 48 89 58 08 48 8d b8 58 fc ff ff 44 [ 225.360509] RSP: 0018:ffff9468ab32fbe8 EFLAGS: 00010293 [ 225.360511] RAX: ffff8aa7a51577a8 RBX: dead000000000122 RCX: dead000000000122 [ 225.360512] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8aa7a5157400 [ 225.360514] RBP: ffff9468ab32fc18 R08: ffff8aa64e47e600 R09: 0000000000000000 [ 225.360515] R10: 0000000000000000 R11: ffffffffc06036e6 R12: dead000000000100 [ 225.360517] R13: ffff8aa7820f1940 R14: dead000000000100 R15: 0000000000000006 [ 225.360519] FS: 00007c1146ffd700(0000) GS:ffff8aa7baa00000(0000) knlGS:0000000000000000 [ 225.360521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 225.360523] CR2: 00007aea3473a000 CR3: 00000000537d6004 CR4: 00000000003606f0 [ 225.360525] Call Trace: [ 225.360528] imgu_vb2_stop_streaming+0xd6/0xf0 [ipu3_imgu] [ 225.360531] __vb2_queue_cancel+0x33/0x22d [videobuf2_common] [ 225.360534] vb2_core_streamoff+0x16/0x78 [videobuf2_common] [ 225.360537] __video_do_ioctl+0x33d/0x42a [ 225.360540] video_usercopy+0x34a/0x615 [ 225.360542] ? video_ioctl2+0x16/0x16 [ 225.360546] v4l2_ioctl+0x46/0x53 [ 225.360548] do_vfs_ioctl+0x50a/0x787 [ 225.360551] ksys_ioctl+0x58/0x83 [ 225.360554] __x64_sys_ioctl+0x1a/0x1e [ 225.360556] do_syscall_64+0x54/0x68 [ 225.360559] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 225.360561] RIP: 0033:0x7c118030f497 [ 225.360563] Code: 8a 66 90 48 8b 05 d1 d9 2b 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 d9 2b 00 f7 d8 64 89 01 48 [ 225.360565] RSP: 002b:00007c1146ffa5a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 225.360567] RAX: ffffffffffffffda RBX: 00007c1140010018 RCX: 00007c118030f497 [ 225.360569] RDX: 00007c114001019c RSI: 0000000040045613 RDI: 000000000000004c [ 225.360570] RBP: 00007c1146ffa700 R08: 00007c1140010048 R09: 0000000000000000 [ 225.360572] R10: 0000000000000000 R11: 0000000000000246 R12: 00007c11400101b0 [ 225.360574] R13: 00007c1140010200 R14: 00007c1140010048 R15: 0000000000000001 [ 225.360576] Modules linked in: snd_seq_dummy snd_seq snd_seq_device veth bridge stp llc tun nf_nat_tftp nf_conntrack_tftp nf_nat_ftp nf_conntrack_ftp esp6 ah6 ip6t_REJECT ip6t_ipv6header cmac rfcomm uinput ipu3_imgu(C) ipu3_cio2 iova videobuf2_v4l2 videobuf2_common videobuf2_dma_sg videobuf2_memops ov13858 ov567 Fix this by moving the list_del() call just below the list_first_entry() call when the buffer no longer needs to be in the list. Fixes: 8ecc7c9d ("media: staging/intel-ipu3: parameter buffer refactoring") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Stanimir Varbanov authored
According to the v4l spec s_fmt must return EBUSY while the particular queue is streaming. Add such check in encoder and decoder s_fmt methods. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Stanimir Varbanov authored
According to stateful Codec API the decoder will process all remaining buffers from before the source change event in dynamic-resolution-change state and mark the last buffer with V4L2_BUF_FLAG_LAST. In Venus case the firmware doesn't mark that last buffer and some mechanism have to be created in v4l decoder driver. Fortunately the firmware interface (HFI) claims that the decoder output buffers will be returned to v4l decoder driver before it send the insufficient event. In order to do that we save last queued in the driver capture buffer in the event_notify and issue flush on output firmware buffers queue. Once the saved buffer is returned (as a result of flush command) we mark it as LAST. For all that possible we extend HFI flush command with one more argument and one more flush_done HFI driver callback. Signed-off-by:
-
Stanimir Varbanov authored
Presently the list initialization is done only in dynamic-resolution-change state, which leads to list corruptions and use-after-free. Init list_head unconditionally in vdec_stop_capture called by vb2 stop_streaming without takeing into account current codec state. Signed-off-by:
-
Stanimir Varbanov authored
Once the hfi_session_flush is issued by the vdec all queued buffers to firmware should be returned to the v4l driver. Some of those buffers are not processed at the time of flush command, those buffers has filled len zero (no data). Catch that in buffer_done callback and mark not filled capture buffers with error state so that client can discard them. Signed-off-by:
-
Stanimir Varbanov authored
Currently calling venus_helper_buffers_done() will return buffers to user for both capture and output queues in the same call. This is wrong because both queues are really separate and calling stop_streaming on one queue shouldn't return buffers for the other. Solve this by add a new queue type argument and fix the clients of the helper function. Signed-off-by:
-
Stanimir Varbanov authored
The array is not changed in the code, so make it const. Signed-off-by:
-
Stanimir Varbanov authored
The hfi_destroy function is called too early in remove method. It destroys a mutex which is used later in the .remove from pmruntime. Solve the issue by moving hfi_destroy after last usage of the mutex. Signed-off-by:
-
Stanimir Varbanov authored
This adds missing mutex_destroy in remove method of venus core driver. Signed-off-by:
-
- 29 Apr, 2020 8 commits
-
-
Hans Verkuil authored
It was not sufficiently clear how to create and use p_def. Improve the documentation. Signed-off-by:
-
Hans Verkuil authored
gpiod_get_value() can return negative values if an error occurs. In several places this error code was ignored. Ensure that errors codes are handled correctly throughout the CEC pin framework and CEC pin drivers. The return code of the cec_pin_ops read() callback had to be changed from 'bool' to 'int', which mean the prototype of that callback in the sun4i drm driver also had to be changed. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hans Verkuil authored
any others capabilities -> any other capabilities Signed-off-by:
-
Lukas Bulwahn authored
Commit a8106818 ("media: move CEC USB drivers to a separate directory") moved drivers/media/usb/{pulse8,rainshadow}-cec to drivers/media/cec/usb/{rainshadow,pulse8}, but did not adjust the entries in MAINTAINERS. Since then, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/media/usb/pulse8-cec/* warning: no file matches F: drivers/media/usb/rainshadow-cec/* Update the MAINTAINERS entries to the new file locations. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Niklas Söderlund authored
The colorspace reported by a video nodes should not be V4L2_COLORSPACE_DEFAULT. Instead a default colorspace should be picked by the driver if V4L2_COLORSPACE_DEFAULT is given by userspace to {G,S,TRY}_FMT. The colorspace V4L2_COLORSPACE_SRGB is arbitrary chosen as the vimc default format to report as it's used for most webcams. Signed-off-by: -
Sean Young authored
smatch reports wait_status is uninitialized, because smatch cannot assume the loop body is ever executed. Clarify the code so that wait_status is retrieved at least once. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
One struct ir_raw_event_ctrl is allocated per raw IR device; reduce the amount allocated if not all decoders are enabled. Signed-off-by:
-
Sean Young authored
Bail out if registers can not be updated. Addresses-Coverity-ID: 1461655 ("Code maintainability issues") Reported-by:coverity-bot <keescook+coverity-bot@chromium.org> Fixes: e6089fec ("media: m88ds3103: Add support for ds3103b demod") Signed-off-by:
-
- 23 Apr, 2020 1 commit
-
-
Mauro Carvalho Chehab authored
There are some tuners used by a few pure DVB boards that use internally V4L2 function calls. Due to that, such drivers now depends on v4l2 core support, and can't be auto-selected if !VIDEO_V4L2: WARNING: unmet direct dependencies detected for DVB_RTL2832_SDR Depends on [n]: MEDIA_SUPPORT [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_CORE [=y] && I2C [=y] && I2C_MUX [=y] && VIDEO_V4L2 [=n] && MEDIA_SDR_SUPPORT [=y] && USB [=y] Selected by [y]: - DVB_USB_RTL28XXU [=y] && USB [=y] && MEDIA_SUPPORT [=y] && MEDIA_USB_SUPPORT [=y] && I2C [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_USB_V2 [=y] && I2C_MUX [=y] && MEDIA_SUBDRV_AUTOSELECT [=y] && MEDIA_SDR_SUPPORT [=y] WARNING: unmet direct dependencies detected for MEDIA_TUNER_E4000 Depends on [n]: (MEDIA_ANALOG_TV_SUPPORT [=y] || MEDIA_DIGITAL_TV_SUPPORT [=y] || MEDIA_RADIO_SUPPORT [=y] || MEDIA_SDR_SUPPORT [=y]) && MEDIA_SUPPORT [=y] && I2C [=y] && VIDEO_V4L2 [=n] Selected by [y]: - DVB_USB_RTL28XXU [=y] && USB [=y] && MEDIA_SUPPORT [=y] && MEDIA_USB_SUPPORT [=y] && I2C [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_USB_V2 [=y] && I2C_MUX [=y] && MEDIA_SUBDRV_AUTOSELECT [=y] WARNING: unmet direct dependencies detected for MEDIA_TUNER_FC2580 Depends on [n]: (MEDIA_ANALOG_TV_SUPPORT [=y] || MEDIA_DIGITAL_TV_SUPPORT [=y] || MEDIA_RADIO_SUPPORT [=y] || MEDIA_SDR_SUPPORT [=y]) && MEDIA_SUPPORT [=y] && I2C [=y] && VIDEO_V4L2 [=n] Selected by [y]: - DVB_USB_RTL28XXU [=y] && USB [=y] && MEDIA_SUPPORT [=y] && MEDIA_USB_SUPPORT [=y] && I2C [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_USB_V2 [=y] && I2C_MUX [=y] && MEDIA_SUBDRV_AUTOSELECT [=y] Detected via randconfig builds. Signed-off-by:
-
