- 14 Jan, 2015 9 commits
-
-
Krzysztof Kozlowski authored
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Make also of_device_id array const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Krzysztof Kozlowski authored
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Make also of_device_id array const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Hans de Goede authored
The A31s is a stripped down version of the A31, as such it is missing some pins and some functions on some pins. The new pinctrl-sun6i-a31s.c this commit adds is a copy of pinctrl-sun6i-a31s.c with the missing pins and functions removed. Note there is no a31s specific version of pinctrl-sun6i-a31-r.c, as the prcm pins are identical between the A31 and the A31s. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Hans de Goede authored
While working on pinctrl for the A31s, I noticed that function 4 of PA15 - PA18 was missing, add these. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Wolfram Sang authored
These functions are supposed to return an error pointer, not NULL. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Vivek Gautam authored
USB and Power regulator on Exynos7 require gpios available in BUS1 pin controller block. So adding the BUS1 pinctrl support. Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Vivek Gautam authored
Adding list of aliases for supported Exynos7 pin controller blocks. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
New pin controllers such as ACPI-based may also have custom properties to parse, and should be able to use generic pin config. Let's make the code compile on !OF systems and rename members a bit to underscore it is custom parameters and not necessarily DT parameters. This fixes a build regression for x86_64 on the zeroday kernel builds. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reviewed-and-tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Soren Brinkmann authored
Instead of the driver caring about implementation details like device tree, just provide information about driver specific pinconf parameters to pinconf-generic which takes care of parsing the DT. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 11 Jan, 2015 4 commits
-
-
Soren Brinkmann authored
This adds a pin-control driver for Zynq. Changes since v2: - driver-specific DT properties are passed to the core in two arrays, one for the actual DT parsing one for the debugfs representation. Issue a compiler warning when the number of entries is not the same for both arrays. Changes since v1: - fix EMIO_SD1_CD pin name - add USB to pinmux options changes since RFCv2: - let Zynq select PINCTRL_ZYNQ. Boot hangs when pinctrl information is present in DT but no driver available. - add #defines to get rid of magical constants - add commas at end of initializers - separate changes in mach-zynq in separate patch - add driver specific io-standard DT property - refactored pinconf set function to not require arguments for argument-less properties - squash other patches in - support for IO-standard property - support for low-power mode property - migration to pinconf_generic_dt_node_to_map_all() - use newly created infrastructure to add pass driver-specific DT params to pinconf-generic changes since RFC: - use syscon/regmap to access registers in SLCR space - rebase to 3.18: rename enable -> set_mux - add kernel-doc - support pinconf - supported attributes - pin-bias: pull up, tristate, disable - slew-rate: 0 == slow, 1 == fast; generic pinconf does not display argument Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Soren Brinkmann authored
Add documentation for the devicetree binding for the Zynq pincontroller. Changes since v1: - fix typo - add USB related documentation - remove 'pinctrl-' prefix for pinctrl sub-nodes - update documentation to enforce strict separation of pinmux and pinconf nodes - update example accordingly Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Soren Brinkmann authored
Additionally to the generic DT parameters, allow drivers to provide driver-specific DT parameters to be used with the generic parser infrastructure. To achieve this 'struct pinctrl_desc' is extended to pass custom pinconf option to the core. In order to pass this kind of information, the related data structures - 'struct pinconf_generic_dt_params', 'pin_config_item' - are moved from pinconf internals to the pinconf-generic header. Additionally pinconfg-generic is refactored to not only iterate over the generic pinconf parameters but also take the parameters into account that are provided through the driver's 'struct pinctrl_desc'. In particular 'pinconf_generic_parse_dt_config()' and 'pinconf_generic_dump' helpers are split into two parts each. In order to have a more generic helper that can be used to process the generic parameters as well as the driver-specific ones. v2: - fix typo - add missing documentation for @conf_items member in struct - rebase to pinctrl/devel: conflict in abx500 - rename _pinconf_generic_dump() to pinconf_generic_dump_one() - removed '_' from _parse_dt_cfg() - removed BUG_ONs, error condition is handled in if statements - removed pinconf_generic_dump_group() & pinconf_generic_dump_pin helpers - fixed up corresponding call sites - renamed pinconf_generic_dump() to pinconf_generic_dump_pins() - added kernel-doc to pinconf_generic_dump_pins() - add kernel-doc - more verbose commit message Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Soren Brinkmann authored
With the new 'groups' property, the DT parser can infer the map type from the fact whether 'pins' or 'groups' is used to specify the pin group to work on. To maintain backwards compatibitliy with current usage of the DT binding, this is only done when PIN_MAP_TYPE_INVALID is passed to the parsing function as type. Also, a new helper 'pinconf_generic_dt_node_to_map_all()' is introduced, which can be used by drivers as generic callback for dt_node_to_map() to leverage the new feature. Changes since v2: - rename dt_pin_specifier to subnode_target_type - add additional comment in header file explaining passing an invalid map type - mention map_all() helper in commit message Changes since RFC v2: - none Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 10 Jan, 2015 5 commits
-
-
Linus Walleij authored
When drivers are compiled in subdirectories the -DDEBUG flag need to be passed in the individual Makefiles. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Suggested-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
After the Nomadik pin controller was force migrated to generic pin control bindings, some leftovers in the documentation need to be cleaned up. The code and device trees are already migrated. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Maxime Ripard authored
The MPP19 and MMP20 pins also have the ability to be muxed to the uart1 function. Add this case to the pinctrl driver. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Wolfram Sang authored
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Mika Westerberg authored
Before resuming from system sleep BIOS restores its view of pin configuration. If we have configured some pins differently from that, for instance some driver requested a pin as a GPIO but it was not in GPIO mode originally, our view of the pin configuration will not match the hardware state anymore. This patch saves the pin configuration and interrupt mask registers on suspend and restores them on exit. This should make sure that the previously configured state is still in effect. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 29 Dec, 2014 1 commit
-
-
Linus Torvalds authored
-
- 28 Dec, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "The important fixes are for two bugs introduced by the merge window. On top of this, add a couple of WARN_ONs and stop spamming dmesg on pretty much every boot of a virtual machine" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: warn on more invariant breakage kvm: fix sorting of memslots with base_gfn == 0 kvm: x86: drop severity of "generation wraparound" message kvm: x86: vmx: reorder some msr writing
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fix from Al Viro: "An embarrassing bug in lustre patches from this cycle ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression] braino in "lustre: use is_root_inode()"
-
Paolo Bonzini authored
Modifying a non-existent slot is not allowed. Also check that the first loop doesn't move a deleted slot beyond the used part of the mslots array. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Before commit 0e60b079 (kvm: change memslot sorting rule from size to GFN, 2014-12-01), the memslots' sorting key was npages, meaning that a valid memslot couldn't have its sorting key equal to zero. On the other hand, a valid memslot can have base_gfn == 0, and invalid memslots are identified by base_gfn == npages == 0. Because of this, commit 0e60b079 broke the invariant that invalid memslots are at the end of the mslots array. When a memslot with base_gfn == 0 was created, any invalid memslot before it were left in place. This can be fixed by changing the insertion to use a ">=" comparison instead of "<=", but some care is needed to avoid breaking the case of deleting a memslot; see the comment in update_memslots. Thanks to Tiejun Chen for posting an initial patch for this bug. Reported-by: Jamie Heilman <jamie@audible.transient.net> Reported-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- 27 Dec, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Just a couple of fixes for the new Intel Skylake HD-audio support" * tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda_intel: apply the Seperate stream_tag for Skylake ALSA: hda_controller: Separate stream_tag for input and output streams.
-
Paolo Bonzini authored
Since most virtual machines raise this message once, it is a bit annoying. Make it KERN_DEBUG severity. Cc: stable@vger.kernel.org Fixes: 7a2e8aafSigned-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Tiejun Chen authored
The commit 34a1cd60, "x86: vmx: move some vmx setting from vmx_init() to hardware_setup()", tried to refactor some codes specific to vmx hardware setting into hardware_setup(), but some msr writing should depend on our previous setting condition like enable_apicv, enable_ept and so on. Reported-by: Jamie Heilman <jamie@audible.transient.net> Tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Al Viro authored
In one of the places (ll_md_blocking_ast()) we had open-coded !is_root_inode(inode) and replaced it with is_root_inode(inode). See the last chunk of f76c23: - inode != inode->i_sb->s_root->d_inode) + is_root_inode(inode)) should've been + !is_root_inode(inode)) obviously... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 26 Dec, 2014 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc build fix from Helge Deller: "This unbreaks the kernel compilation on parisc with gcc-4.9" * 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix out-of-register compiler error in ldcw inline assembler function
-
John David Anglin authored
The __ldcw macro has a problem when its argument needs to be reloaded from memory. The output memory operand and the input register operand both need to be reloaded using a register in class R1_REGS when generating 64-bit code. This fails because there's only a single register in the class. Instead, use a memory clobber. This also makes the __ldcw macro a compiler memory barrier. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Helge Deller <deller@gmx.de>
-
Libin Yang authored
The total stream number of Skylake's input and output stream exceeds 15, which will cause some streams do not work because of the overflow on SDxCTL.STRM field if using the legacy stream tag allocation method. This patch uses the new stream tag allocation method by add the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform. Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Rafal Redzimski authored
Implemented separate stream_tag assignment for input and output streams. According to hda specification stream tag must be unique throughout the input streams group, however an output stream might use a stream tag which is already in use by an input stream. This change is necessary to support HW which provides a total of more than 15 stream DMA engines which with legacy implementation causes an overflow on SDxCTL.STRM field (and the whole SDxCTL register) and as a result usage of Reserved value 0 in the SDxCTL.STRM field which confuses HDA controller. Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Xmas fixes pull: core: one atomic fix, revert the WARN_ON dumb buffers patch. agp: fixup Dave J. nouveau: fix 3.18 regression for old userspace tegra fixes: vblank and iommu fixes amdkfd: fix bugs shown by testing with userspace, init apertures once msm: hdmi fixes and cleanup i915: misc fixes There is also a link ordering fix that I've asked to be cc'ed to you, putting iommu before gpu, it fixes an issue with amdkfd when things are all in the kernel, but I didn't like sending it via my tree without discussion. I'll probably be a bit on/off for a few weeks with pulls now, due to holidays and LCA, so don't be surprised if stuff gets a bit backed up, and things end up a bit large due to lag" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2" agp: Fix up email address & attributions in AGP MODULE_AUTHOR tags nouveau: bring back legacy mmap handler drm/msm/hdmi: rework HDMI IRQ handler drm/msm/hdmi: enable regulators before clocks to avoid warnings drm/msm/mdp5: update irqs on crtc<->encoder link change drm/msm: block incoming update on pending updates drm/atomic: fix potential null ptr on plane enable drm/msm: Deletion of unnecessary checks before the function call "release_firmware" drm/msm: Deletion of unnecessary checks before two function calls drm/tegra: dc: Select root window for event dispatch drm/tegra: gem: Use the proper size for GEM objects drm/tegra: gem: Flush buffer objects upon allocation drm/tegra: dc: Fix a potential race on page-flip completion drm/tegra: dc: Consistently use the same pipe drm/irq: Add drm_crtc_vblank_count() drm/irq: Add drm_crtc_handle_vblank() drm/irq: Add drm_crtc_send_vblank_event() drm/i915: Disable PSMI sleep messages on all rings around context switches drm/i915: Force the CS stall for invalidate flushes ...
-
- 25 Dec, 2014 1 commit
-
-
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull ipmi driver bugfixes from Corey Minyard: "Fix two bugs: One that lockdep turned up, I didn't go far enough with cleanup of attributes for IPMI. This has been there a long time; my previous fix of this didn't fix all the attributes. One fix for some arches that need an explicit linux/ctype.h for isspace()" * tag 'for-linus-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix compile issue with isspace() ipmi: Finish cleanup of BMC attributes
-
- 24 Dec, 2014 3 commits
-
-
Dave Airlie authored
This reverts commit 355a7018. This had some bad side effects under normal operation, and should have been dropped earlier. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
- Display MEC fw version in topology. Without this, the HSA userspace stack is broken. - Init apertures information only once per process * tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux: amdkfd: init aperture once per process amdkfd: Display MEC fw version in topology node drm/radeon: Add implementation of get_fw_version drm/amd: Add get_fw_version to kfd-->kgd interface
-
git://git.infradead.org/users/pcmoore/auditLinus Torvalds authored
Pull audit fixes from Paul Moore: "Four patches to fix various problems with the audit subsystem, all are fairly small and straightforward. One patch fixes a problem where we weren't using the correct gfp allocation flags (GFP_KERNEL regardless of context, oops), one patch fixes a problem with old userspace tools (this was broken for a while), one patch fixes a problem where we weren't recording pathnames correctly, and one fixes a problem with PID based filters. In general I don't think there is anything controversial with this patchset, and it fixes some rather unfortunate bugs; the allocation flag one can be particularly scary looking for users" * 'upstream' of git://git.infradead.org/users/pcmoore/audit: audit: restore AUDIT_LOGINUID unset ABI audit: correctly record file names with different path name types audit: use supplied gfp_mask from audit_buffer in kauditd_send_multicast_skb audit: don't attempt to lookup PIDs when changing PID filtering audit rules
-
- 23 Dec, 2014 4 commits
-
-
Richard Guy Briggs authored
A regression was caused by commit 780a7654: audit: Make testing for a valid loginuid explicit. (which in turn attempted to fix a regression caused by e1760bd5) When audit_krule_to_data() fills in the rules to get a listing, there was a missing clause to convert back from AUDIT_LOGINUID_SET to AUDIT_LOGINUID. This broke userspace by not returning the same information that was sent and expected. The rule: auditctl -a exit,never -F auid=-1 gives: auditctl -l LIST_RULES: exit,never f24=0 syscall=all when it should give: LIST_RULES: exit,never auid=-1 (0xffffffff) syscall=all Tag it so that it is reported the same way it was set. Create a new private flags audit_krule field (pflags) to store it that won't interact with the public one from the API. Cc: stable@vger.kernel.org # v3.10-rc1+ Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - __cpu_suspend mm switching fix after warm boot - arch_setup_dma_ops implementation - pgd_page compilation error fix - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Add pgd_page to support RCU fast_gup arm64: defconfig: defconfig update for 3.19 arm64: kernel: fix __cpu_suspend mm switch on warm-boot arm64: Replace set_arch_dma_coherent_ops with arch_setup_dma_ops
-
Jungseok Lee authored
This patch adds pgd_page definition in order to keep supporting HAVE_GENERIC_RCU_GUP configuration. In addition, it changes pud_page expression to align with pmd_page for readability. An introduction of pgd_page resolves the following build breakage under 4KB + 4Level memory management combo. mm/gup.c: In function 'gup_huge_pgd': mm/gup.c:889:2: error: implicit declaration of function 'pgd_page' [-Werror=implicit-function-declaration] head = pgd_page(orig); ^ mm/gup.c:889:7: warning: assignment makes pointer from integer without a cast head = pgd_page(orig); Cc: Will Deacon <will.deacon@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> [catalin.marinas@arm.com: remove duplicate pmd_page definition] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Will Deacon authored
The usual defconfig tweaks, this time: - FHANDLE and AUTOFS4_FS to keep systemd happy - PID_NS, QUOTA and KEYS to keep LTP happy - Disable DEBUG_PREEMPT, as this *really* hurts performance Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-