- 30 Oct, 2009 8 commits
-
-
Ken Kawasaki authored
pcnet_cs,serial_cs: add cis of PreMax ethernet pcmcia card, and some Sierra Wireless serial card(AC555, AC7xx, AC8xx). use PROD_ID for AC7xx, because MANF_ID of AC7xx and AC8xx are the same. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raimonds Cicans authored
r8169 card drop incoming VLAN tagged MTU byte large jumbo frames It looks to compare current and maximal packet sizes hardware use '<' operator, not '<='. Bug introduced by commit fdd7b4c3 ("r8169: fix crash when large packets are received") Signed-off-by: Raimonds Cicans <ray@apollo.lv> Signed-off-by: David S. Miller <davem@davemloft.net>
-
roel kluin authored
Prevent read outside array bounds. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
jamal authored
Policy routing is not looked up by mark on reverse path filtering. This fixes it. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
struct sk_buff kmemcheck annotations enlarged this structure by 8/16 bytes Fix this by moving 'protocol' inside flags1 bitfield, and queue_mapping inside flags2 bitfield. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
This patch reworks a previous workaround (commit 7d3cabbc) for an issue in hardware where noise on the interconnect between the MAC and PHY could be generated by a lower power mode (K1) at 1000Mbps resulting in bad packets. Disable K1 while at 1000 Mbps but keep it enabled for 10/100Mbps and when the cable is disconnected. The original version of this workaround was found to be incomplete. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
On PCH-based (82577/82578) and some ICH8-based parts (82566) there is an issue with the hardware automatically configuring the PHY with contents from the EEPROM after the PHY is reset, so do the configuration by the driver instead. This was already similarly done for some 82566 parts in e1000_phy_hw_reset_ich8lan() but needs to be done after other resets, so move the PHY configuration code to its own function and call after all PHY resets. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
A change in how PHYs are electrically isolated caused all PHYs to be isolated followed by reverting that isolation for the selected PHY. Unfortunately, isolating the selected PHY for even a short period of time can result in DHCP negotiation taking more than 10 seconds on certain embedded configurations delaying boot time as reported by Bernhard Kaindl. This patch reverts the change to how PHYs are isolated yet still works around the issue for 82552 needing the selected PHY's BMCR register to be written after the unused PHYs are isolated. This code is moved below the setting of nic->phy ID in order to do the 82552-specific workaround. Cc: Bernhard Kaindl <bernhard.kaindl@gmx.net> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 Oct, 2009 7 commits
-
-
Gabor Gombas authored
Currently PACKET_TX_RING forces certain amount of every frame to remain unused. This probably originates from an early version of the PACKET_TX_RING patch that in fact used the extra space when the (since removed) CONFIG_PACKET_MMAP_ZERO_COPY option was enabled. The current code does not make any use of this extra space. This patch removes the extra space reservation and lets userspace make use of the full frame size. Signed-off-by: Gabor Gombas <gombasg@sztaki.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Janusz Krzysztofik authored
I found that the current version of drivers/net/usb/dm9601.c can be used to successfully drive a low-power, low-cost network adapter with USB ID 0a46:9000, based on a DM9000E chipset. As no device with this ID is yet present in the kernel, I have created a patch that adds support for the device to the dm9601 driver. Created and tested against linux-2.6.32-rc5. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ron Mercer authored
The mailbox command process would only process a maximum of 5 unrelated firmware events while waiting for it's command completion status. It should process an unlimited number of events while waiting for a maximum of 5 seconds. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ron Mercer authored
Clean up driver resources without touch the hardware. Add pci save/restore state. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
Augment raw_send_hdrinc to correct for incorrect ip header length values A series of oopses was reported to me recently. Apparently when using AF_RAW sockets to send data to peers that were reachable via ipsec encapsulation, people could panic or BUG halt their systems. I've tracked the problem down to user space sending an invalid ip header over an AF_RAW socket with IP_HDRINCL set to 1. Basically what happens is that userspace sends down an ip frame that includes only the header (no data), but sets the ip header ihl value to a large number, one that is larger than the total amount of data passed to the sendmsg call. In raw_send_hdrincl, we allocate an skb based on the size of the data in the msghdr that was passed in, but assume the data is all valid. Later during ipsec encapsulation, xfrm4_tranport_output moves the entire frame back in the skbuff to provide headroom for the ipsec headers. During this operation, the skb->transport_header is repointed to a spot computed by skb->network_header + the ip header length (ihl). Since so little data was passed in relative to the value of ihl provided by the raw socket, we point transport header to an unknown location, resulting in various crashes. This fix for this is pretty straightforward, simply validate the value of of iph->ihl when sending over a raw socket. If (iph->ihl*4U) > user data buffer size, drop the frame and return -EINVAL. I just confirmed this fixes the reported crashes. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Bohac authored
In mii monitor mode, bond_check_dev_link() calls the the ioctl handler of slave devices. It stores the ndo_do_ioctl function pointer to a static (!) ioctl variable and later uses it to call the handler with the IOCTL macro. If another thread executes bond_check_dev_link() at the same time (even with a different bond, which none of the locks prevent), a race condition occurs. If the two racing slaves have different drivers, this may result in one driver's ioctl handler being called with a pointer to a net_device controlled with a different driver, resulting in unpredictable breakage. Unless I am overlooking something, the "static" must be a copy'n'paste error (?). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Oct, 2009 3 commits
-
-
Michael S. Tsirkin authored
virtio net used to unlink skbs from send queues on error, but ever since 48925e37 we do not do this. This causes guest data corruption and crashes with vhost since net core can requeue the skb or free it without it being taken off the list. This patch fixes this by queueing the skb after successful transmit. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Page buffers containing packets with an incorrect checksum or using a protocol not handled by hardware checksum offload were previously not passed to LRO. The conversion to GRO changed this, but did not set the ip_summed value accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match the recent firmware update: commit 078b0735 bnx2: Update firmware to 5.0.0.j3. Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when iSCSI is enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Oct, 2009 12 commits
-
-
Bartlomiej Zolnierkiewicz authored
Cc: users@rt2x00.serialmonkey.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Roel Kluin authored
Test whether index is within bounds before reading the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Björn Smedman authored
When hostapd injects a frame, e.g. an authentication or association response, mac80211 looks for a suitable access point virtual interface to associate the frame with based on its source address. This makes it possible e.g. to correctly assign sequence numbers to the frames. A small typo in the ethernet address comparison statement caused a failure to find a suitable ap interface. Sequence numbers on such frames where therefore left unassigned causing some clients (especially windows-based 11b/g clients) to reject them and fail to authenticate or associate with the access point. This patch fixes the typo in the address comparison statement. Signed-off-by: Björn Smedman <bjorn.smedman@venatech.se> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Holger Schurig authored
This fixes the following sparse warnings: $ make modules SUBDIRS=drivers/net/wireless/libertas C=1 CF=-D__CHECK_ENDIAN__ make: Entering directory `/usr/src/linux-wl' CHECK drivers/net/wireless/libertas/if_spi.c drivers/net/wireless/libertas/if_spi.c:137:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:137:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:137:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:191:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:191:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:191:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:256:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:256:24: expected restricted __le32 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:256:24: got unsigned int *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Andrey Yurovsky authored
Fix a typo in the description of hwmp_route_info_get(), no function changes. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When the in-kernel SME gets an association failure from the AP we don't deauthenticate, and thus get into a very confused state which will lead to warnings later on. Fix this by actually deauthenticating when the AP indicates an association failure. (Brought to you by the hacking session at Kernel Summit 2009 in Tokyo, Japan. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When association fails, we should stay authenticated, which in mac80211 is represented by the existence of the mlme work struct, so we cannot free that, instead we need to just set it to idle. (Brought to you by the hacking session at Kernel Summit 2009 in Tokyo, Japan. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Reinette Chatre authored
Recent commit "mac80211: fix logic error ibss merge bssid check" fixed joining of ibss cell when static bssid is provided. In this case ifibss->bssid is set before the cell is joined and comparing that address to a bss should thus always succeed. Unfortunately this change broke the other case of joining a ibss cell without providing a static bssid where the value of ifibss->bssid is not set before the cell is joined. Since ifibss->bssid may be set before or after joining the cell we do not learn anything by comparing it to a known bss. Remove this check. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Miguel Boton authored
'struct b43_wl' declaration is missing at 'leds.h'. It should be declared to avoid getting some GCC warnings at 'b43_leds_unregister'. Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
"b43: Fix PPC crash in rfkill polling on unload" fixed the bug reported in Bugzilla No. 14181; however, it introduced a new bug. Whenever the radio switch was turned off, it was necessary to unload and reload the driver for it to recognize the switch again. This patch fixes both the original bug in #14181 and the bug introduced by the previous patch. It must be stated, however, that if there is a BCM4306/3 with an rfkill switch (not yet proven), then the driver will need an unload/reload cycle to turn the device back on. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Benoit PAPILLAULT authored
Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Nobuhiro Iwamatsu authored
Add include asm/cacheflush.h, because declaration of __flush_purge_region moved to asm/cacheflush.h. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Oct, 2009 9 commits
-
-
Michal Ostrowski authored
Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
-
Bruce Allan authored
PCH-based parts (82577/82578) and some ICH8-based parts (82566) need to hold the swflag (sw/fw/hw hardware semaphore) over consecutive PHY accesses in order to perform sw-driven PHY configuration during initialization to workaround known hardware issues (see follow-on patch). This patch provides new PHY read/write functions (and function pointers) that will allow accessing the PHY registers assuming the swflag has already been acquired. The actual PHY register access code has moved into helper functions that are called with a flag indicating whether or not the swflag has already been acquired and acquires/releases it if not. The functions called from within the updated PHY access functions had to be updated to assume the swflag was already acquired, and other functions that called those functions were also updated to acquire/release the swflag. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
Accesses to NVM and PHY/CSR registers on ICHx/PCH-based parts are protected from concurrent accesses with a mutex that is acquired when the access is initiated and released when the access has completed. However, the two types of accesses should not be protected by the same mutex because the driver may have to access the NVM while already holding the mutex over several consecutive PHY/CSR accesses which would result in livelock. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
Unlike previous ICHx-based parts, the PCH-based parts (82577/82578) require LPLU (Low Power Link Up, or "reverse auto-negotiation") to be configured in the PHY rather than the MAC. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
In some conditions (e.g. when AMT is enabled on the system), it is possible to take an extended period of time to for the driver to acquire the sw/fw/hw hardware semaphore used to protect against concurrent access of a shared resource (e.g. PHY registers). This could cause PHY registers to not get configured properly resulting in link issues. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
Performing a dummy read of the PHY Wakeup Control (WUC) register clears the wakeup enable bit set by an PHY reset. If this bit remains set, link problems may occur. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch resolves a memory leak which occurs while changing the ring size while the interface is down. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch resolves a memory leak that occurs when you resize the rings via the ethtool -G option while the interface is down. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
Changing ring sizes while the interface was down was causing a double allocation of the receive and transmit rings. This issue is amplified when there are multiple rings enabled. To prevent this we need to add an additional check which will just update the ring counts when the interface is not up and skip the allocation steps. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Oct, 2009 1 commit
-
-
Jasper Spaans authored
Modify bonding hash transmit policies to use the psource MAC address of the packet instead of the MAC address configured for the bonding device. The old sitation conflicts with the documentation. Signed-off-by: Jasper Spaans <spaans@fox-it.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-