- 04 Aug, 2015 35 commits
-
-
Alexander Usyskin authored
Before adding support for D0i3 we need to reorganize the hbm pg handling Move HBM PG response code to dedicated functions in order to unclutter hbm command switch. Add check for the right system state before message processing and return -EPROTO in state mismatch case. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
D0i3 adds additional interrupt reason bit, therefore we add a variable intr_source to save the interrupt causes for further dispatching. The interrupt cause is saved in the irq quick handler to achieve unified behavior for both MSI enabled and shared interrupt platforms. Signed-off-by:
-
Alexander Usyskin authored
Detect d0i3 low power state during hw configuration, the value is set in HFS_1 pci config reigister. Signed-off-by:
-
Tomas Winkler authored
Starting with Intel Sunrisepoint (Skylake PCH) the MEI device supports D0i3 low power state. Add D0i3 control registers. Signed-off-by:
-
Alexander Usyskin authored
The device can return error 5 (NOT_ALLOWED) on connection attempt. This error can happen if: 1. An another connection attempt is in progress 2. There is an attempt to connect a fixed (connectionless) client 3. The number of available connections is exceeded (new in HBM 2.0) We should not hit that error unless there is an internal book keeping hiccup except option (3), therefore we translate the error code to errno EBUSY; Signed-off-by:
-
Alexander Usyskin authored
Enable drivers on mei client bus to subscribe to asynchronous event notifications. Introduce events_mask to the existing callback infrastructure so it is possible to handle both RX and event notification. Signed-off-by:
-
Tomas Winkler authored
A process can be informed about client notification also via SIGIO with POLL_PRI event. Signed-off-by:
-
Tomas Winkler authored
Polling on priority events is translated on waiting for event notification. One need to enable notification prior for calling select or poll system call otherwise process will not wait. Signed-off-by:
-
Tomas Winkler authored
Add ioctl IOCTL_MEI_NOTIFY_SET for enabling and disabling async event notification. Add ioctl IOCTL_MEI_NOTIFY_GET for receiving and acking an event notification. Signed-off-by:
-
Tomas Winkler authored
mei_cl_notify_get is to be called by a host client to wait, receive, and ack the event notification. Signed-off-by:
-
Tomas Winkler authored
Add per client notification request infrastructure that allows client to enable or disable async event notification. Signed-off-by:
-
Tomas Winkler authored
Only FW version 2.0 and newer support the async event notification. For backward compatibility block the feature if the FW version is older then 2.0 Signed-off-by:
-
Tomas Winkler authored
Implement sending and reception handlers for the async event notification hbm commands. Add client notification book keeping data required for the messages notify_en to indicate whether notification is enabled notify_ev to indicate whether an event is pending Signed-off-by: -
Tomas Winkler authored
FW has gained new capability where a FW client can asynchronously notify the host that an event has occurred in its process. The notification doesn't provide any data and host may need to query further the FW client in order to get details of the event. Host can subscribe or unsubscribe to the event notification via designated HBM commands, and also the notification is carried on a new HBM command. This patch adds definitions of asynchronous notification HBM commands. Signed-off-by:
-
Alexander Usyskin authored
For the FW with HBM version >= 2.0 we don't need to reset the whole device in case of a particular client failing to connect, it is enough to send disconnect a request to bring the device to the stable state. Signed-off-by:
-
Tomas Winkler authored
HBM version 2.0 and above allows ME clients in the system to register/unregister after the system is fully initialized. Clients may be added or removed after enum_resp message was received 1. To preserve backward compatibility the driver can opt-in to receive client add messages by setting allow_add field in enum_req 2. A new client is added upon reception of MEI_HBM_ADD_CLIENT_REQ_CMD 3. A client is removed in a lazy manner when connection request respond with MEI_HBMS_CLIENT_NOT_FOUND status Signed-off-by:
-
Tomas Winkler authored
MEI bus was designed around nfc and was hard to extend. Instead of the hard coded way of adding the devices on the mei bus we scan the whole me client list and create a device for each eligible me client (mei_cl_bus_rescan); currently we support only clients with single connection and fixed address clients. NFC radio name detection is run as a fixup routine The patch replaces handling the device list based on struct me_cl to device list based on me_cl_devices. The creating a connection is pushed from the device creation time to device enablement. Signed-off-by:
-
Tomas Winkler authored
Remove the dependency on struct ndev from the nfc device name creation function so it is possible to use it in a fixup routine Signed-off-by:
-
Tomas Winkler authored
Currently we support only clients with single connection and fixed address clients so all other clients are blacklisted Signed-off-by:
-
Tomas Winkler authored
Blacklist nfc info client which is only used for retrieval of the NFC radio version Signed-off-by:
-
Tomas Winkler authored
Split the device registration into allocation and device struct initialization, device setup, and the final device registration. This why it is possible to run fixups and quirks during the setup stage on an initialized device. Each fixup routine effects do_match flag. If the flag is set to false at the end the device won't be registered on the bus. Signed-off-by:
-
Tomas Winkler authored
Instead of holding the list of host clients (me_cl) we want to keep the list me client devices (mei_cl_device) This way we can create host to me client connection only when needed. Add list head to mei_cl_device and cl_bus_lock Add bus_added flag to the me client (mei_me_client) to track if the appropriate mei_cl_device was already created and is_added flag to mei_cl_device to track if it was already added to the device list across the bus rescans Signed-off-by:
-
Tomas Winkler authored
Add reference to the bus device (mei_device) for easier access. To ensures that referencing cldev->bus is valid during cldev life time we increase the bus ref counter on a client device creation and drop it on the device release. Signed-off-by:
-
Tomas Winkler authored
Instead of generating device id on the fly during probing we find the matching id entry on the device id table. Get bus the module reference counter so it cannot be unloaded after the driver has bounded to the client device Signed-off-by:
-
Tomas Winkler authored
mei_cl_device_match now calls mei_cl_device_find that returns the matching device id in the device id table. We will utilize the mei_cl_device_find during probing to locate the matching entry. Signed-off-by:
-
Tomas Winkler authored
If event registeration has failed, the caller should know about it. Signed-off-by:
-
Tomas Winkler authored
Do not enable events implicitly in mei_cl_enable_device, it should be done explicitly using mei_cl_register_event_cb so the events are enabled only when needed. The NFC drivers has been already using it that way so no need for further changes just remove the code from mei_cl_enable_device. Signed-off-by:
-
Tomas Winkler authored
Rename mei_cl_uevent to mei_cl_device_uevent to match the naming convention of mei_cl_bus_type functions Signed-off-by:
-
Tomas Winkler authored
To make the file more organize move mei client driver api to the start of the file and add Kdoc. There are no functional changes in this patch. Signed-off-by:
-
Tomas Winkler authored
The bus-fixup.c will be a place for fixups and quirks for all types of me client devices. As for now it contians only the fixup for setting the nfc device name on the me client bus. Signed-off-by:
-
Tomas Winkler authored
In the mei bus layer there is use of different variables of driver and device types with no clear naming convention. There are generic struct device and struct driver, then mei_cl_{device, driver}, and finally mei_device which in this context serves as a bus device. The patch sets following naming convention: the variables of type struct device remains dev the variables of type struct driver remains drv the variables of type struct mei_cl_device are now cldev the variables of type struct mei_cl_driver are now cldrv the variables of type struct mei_device are now bus, in bus layer context Signed-off-by: -
Alexander Usyskin authored
The mei_cl_write function is giving up on a write cb ownership after it was sent or queued. The write cb is then freed in the completion handler. Especially during blocking write mei_cl_write function waits for the completion handler and then access the freed memory to fetch the written size. The quick fix is to store the buffer size prior to sending, the size is not altered during the flow. Signed-off-by:
-
Valentin Rothberg authored
Until now, checkkonfigsymbols.py did not check default statements for references on missing Kconfig symbols (i.e., undefined Kconfig options). Hence, add support to parse and check the Kconfig default statement. Signed-off-by:
Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by:
-
Valentin Rothberg authored
Color output to make it more readable. Symbols will be printed yellow, relevant commits (see --find) red. Signed-off-by:
Stefan Hengelein <stefan.hengelein@fau.de> Acked-by:
Andreas Ruprecht <andreas.ruprecht@fau.de> Signed-off-by:
-
Valentin Rothberg authored
Add option -f/--find to find relevant commits when using the --diff option. --find is useful in case a user wants to check commits that potentially cause a Kconfig symbol to be missing. This is done via 'git log -G $SYMBOL' (i.e., to get a list of commits that change $SYMBOL). The relevant commits are printed below the "SYMBOL\tFILES" line, followed by an empty line to increase readability. Signed-off-by:
-
- 29 Jul, 2015 3 commits
-
-
Tim Bird authored
Add framework for the coincell charger DT block in pm8941 file, and actual values for honami battery in the honami dts file. Signed-off-by:
Tim Bird <tim.bird@sonymobile.com> Reviewed-by:
Andy Gross <agross@codeaurora.org> Signed-off-by:
-
Tim Bird authored
This driver is used to configure the coincell charger found in Qualcomm PMICs. The driver allows configuring the current-limiting resistor for the charger, as well as the voltage to apply to the coincell (or capacitor) when charging. Signed-off-by:
-
Tim Bird authored
This binding is used to configure the driver for the coincell charger found in Qualcomm PMICs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 27 Jul, 2015 2 commits
-
-
Krzysztof Kozlowski authored
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Sudip Mukherjee authored
Lets call remove_proc_entry() in the error path only if we have successfully created "misc" in procfs. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
