- 06 Mar, 2010 37 commits
-
-
Johannes Weiner authored
The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
page_mapping_inuse() is a historic predicate function for pages that are about to be reclaimed or deactivated. According to it, a page is in use when it is mapped into page tables OR part of swap cache OR backing an mmapped file. This function is used in combination with page_referenced(), which checks for young bits in ptes and the page descriptor itself for the PG_referenced bit. Thus, checking for unmapped swap cache pages is meaningless as PG_referenced is not set for anonymous pages and unmapped pages do not have young ptes. The test makes no difference. Protecting file pages that are not by themselves mapped but are part of a mapped file is also a historic leftover for short-lived things like the exec() code in libc. However, the VM now does reference accounting and activation of pages at unmap time and thus the special treatment on reclaim is obsolete. This patch drops page_mapping_inuse() and switches the two callsites to use page_mapped() directly. Signed-off-by:
-
Johannes Weiner authored
The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by:
-
Mel Gorman authored
Add a bare description of what /sys/devices/system/node/nodeX is. Others will follow in time but right now, none of that tree is documented. The existence of this file might at least encourage people to document new entries. Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Mel Gorman authored
Add documentation for /proc/pagetypeinfo. Signed-off-by:
Christoph Lameter <cl@linux-foundation.org> Reviewed-by:
-
David Rientjes authored
free_area_init_nodes() emits pfn ranges for all zones on the system. There may be no pages on a higher zone, however, due to memory limitations or the use of the mem= kernel parameter. For example: Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 The implementation copies the previous zone's highest pfn, if any, as the next zone's lowest pfn. If its highest pfn is then greater than the amount of addressable memory, the upper memory limit is used instead. Thus, both the lowest and highest possible pfn for higher zones without memory may be the same. The pfn range for zones without memory is now shown as "empty" instead. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Reviewed-by:
-
Rafael J. Wysocki authored
There are quite a few GFP_KERNEL memory allocations made during suspend/hibernation and resume that may cause the system to hang, because the I/O operations they depend on cannot be completed due to the underlying devices being suspended. Avoid this problem by clearing the __GFP_IO and __GFP_FS bits in gfp_allowed_mask before suspend/hibernation and restoring the original values of these bits in gfp_allowed_mask durig the subsequent resume. [akpm@linux-foundation.org: fix CONFIG_PM=n linkage] Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Reported-by:
Maxim Levitsky <maximlevitsky@gmail.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Hugh Dickins authored
There's an off-by-one disagreement between mkswap and swapon about the meaning of swap_header last_page: mkswap (in all versions I've looked at: util-linux-ng and BusyBox and old util-linux; probably as far back as 1999) consistently means the offset (in page units) of the last page of the swap area, whereas kernel sys_swapon (as far back as 2.2 and 2.3) strangely takes it to mean the size (in page units) of the swap area. This disagreement is the safe way round; but it's worrying people, and loses us one page of swap. The fix is not just to add one to nr_good_pages: we need to get maxpages (the size of the swap_map array) right before that; and though that is an unsigned long, be careful not to overflow the unsigned int p->max which later holds it (probably why header uses __u32 last_page instead of size). Why did we subtract one from the maximum swp_offset to calculate maxpages? Though it was probably me who made that change in 2.4.10, I don't get it: and now we should be adding one (without risk of overflow in this case). Fix the handling of swap_header badpages: it could have overrun the swap_map when very large swap area used on a more limited architecture. Remove pre-initializations of swap_header, nr_good_pages and maxpages: those date from when sys_swapon was supporting other versions of header. Reported-by:
Nitin Gupta <ngupta@vflare.org> Reported-by:
Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by:
-
Rik van Riel authored
When a VMA is in an inconsistent state during setup or teardown, the worst that can happen is that the rmap code will not be able to find the page. The mapping is in the process of being torn down (PTEs just got invalidated by munmap), or set up (no PTEs have been instantiated yet). It is also impossible for the rmap code to follow a pointer to an already freed VMA, because the rmap code holds the anon_vma->lock, which the VMA teardown code needs to take before the VMA is removed from the anon_vma chain. Hence, we should not need the VM_LOCK_RMAP locking at all. Signed-off-by:
-
Rik van Riel authored
When the parent process breaks the COW on a page, both the original which is mapped at child and the new page which is mapped parent end up in that same anon_vma. Generally this won't be a problem, but for some workloads it could preserve the O(N) rmap scanning complexity. A simple fix is to ensure that, when a page which is mapped child gets reused in do_wp_page, because we already are the exclusive owner, the page gets moved to our own exclusive child's anon_vma. Signed-off-by:
Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by:
-
Rik van Riel authored
When an anonymous page is inherited from a parent process, the vma->anon_vma can differ from the page anon_vma. This can trip up __page_check_anon_rmap, which is indirectly called from do_swap_page(). Remove that obsolete check to prevent an oops. Signed-off-by:
-
Rik van Riel authored
The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by:
-
Thiago Farina authored
mm/memcontrol.c:2548:32: warning: Using plain integer as NULL pointer Signed-off-by:
Thiago Farina <tfransosi@gmail.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
Andrew Morton authored
It was tolerable until Eric went and added 8388608. Cc: Eric Paris <eparis@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Wu Fengguang authored
This fixes inefficient page-by-page reads on POSIX_FADV_RANDOM. POSIX_FADV_RANDOM used to set ra_pages=0, which leads to poor performance: a 16K read will be carried out in 4 _sync_ 1-page reads. In other places, ra_pages==0 means - it's ramfs/tmpfs/hugetlbfs/sysfs/configfs - some IO error happened where multi-page read IO won't help or should be avoided. POSIX_FADV_RANDOM actually want a different semantics: to disable the *heuristic* readahead algorithm, and to use a dumb one which faithfully submit read IO for whatever application requests. So introduce a flag FMODE_RANDOM for POSIX_FADV_RANDOM. Note that the random hint is not likely to help random reads performance noticeably. And it may be too permissive on huge request size (its IO size is not limited by read_ahead_kb). In Quentin's report (http://lkml.org/lkml/2009/12/24/145), the overall (NFS read) performance of the application increased by 313%! Tested-by:
Quentin Barnes <qbarnes+nfs@yahoo-inc.com> Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@kernel.org> [2.6.33.x] Cc: <qbarnes+nfs@yahoo-inc.com> Signed-off-by:
-
Wu Fengguang authored
We'll introduce FMODE_RANDOM which will be runtime modified. So protect all runtime modification to f_mode with f_lock to avoid races. Signed-off-by:
-
KOSAKI Motohiro authored
commit 01b1ae63 ("memcg: simple migration handling") removed mem_cgroup_uncharge_cache_page() call from migrate_page_copy. Local variable `anon' is now unused. Signed-off-by:
-
KOSAKI Motohiro authored
Currently, do_migrate_pages() have very long comment and this is not indent properly. I often misunderstand it is function starting commnents and confused it. this patch fixes it. note: this patch doesn't break 80 column rule. I guess original author intended this indentaion, but an accident corrupted it. Signed-off-by: -
akpm@linux-foundation.org authored
A memmap is a directory in sysfs which includes 3 text files: start, end and type. For example: start: 0x100000 end: 0x7e7b1cff type: System RAM Interface firmware_map_add was not called explicitly. Remove it and add function firmware_map_add_hotplug as hotplug interface of memmap. Each memory entry has a memmap in sysfs, When we hot-add new memory, sysfs does not export memmap entry for it. We add a call in function add_memory to function firmware_map_add_hotplug. Add a new function add_sysfs_fw_map_entry() to create memmap entry, it will be called when initialize memmap and hot-add memory. [akpm@linux-foundation.org: un-kernedoc a no longer kerneldoc comment] Signed-off-by:
Shaohui Zheng <shaohui.zheng@intel.com> Acked-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Reviewed-by:
-
KOSAKI Motohiro authored
Strangely, current mbind() doesn't merge vma with neighbor vma although it's possible. Unfortunately, many vma can reduce performance... This patch fixes it. reproduced program ---------------------------------------------------------------- #include <numaif.h> #include <numa.h> #include <sys/mman.h> #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <string.h> static unsigned long pagesize; int main(int argc, char** argv) { void* addr; int ch; int node; struct bitmask *nmask = numa_allocate_nodemask(); int err; int node_set = 0; char buf[128]; while ((ch = getopt(argc, argv, "n:")) != -1){ switch (ch){ case 'n': node = strtol(optarg, NULL, 0); numa_bitmask_setbit(nmask, node); node_set = 1; break; default: ; } } argc -= optind; argv += optind; if (!node_set) numa_bitmask_setbit(nmask, 0); pagesize = getpagesize(); addr = mmap(NULL, pagesize*3, PROT_READ|PROT_WRITE, MAP_ANON|MAP_PRIVATE, 0, 0); if (addr == MAP_FAILED) perror("mmap "), exit(1); fprintf(stderr, "pid = %d \n" "addr = %p\n", getpid(), addr); /* make page populate */ memset(addr, 0, pagesize*3); /* first mbind */ err = mbind(addr+pagesize, pagesize, MPOL_BIND, nmask->maskp, nmask->size, MPOL_MF_MOVE_ALL); if (err) error("mbind1 "); /* second mbind */ err = mbind(addr, pagesize*3, MPOL_DEFAULT, NULL, 0, 0); if (err) error("mbind2 "); sprintf(buf, "cat /proc/%d/maps", getpid()); system(buf); return 0; } ---------------------------------------------------------------- result without this patch addr = 0x7fe26ef09000 [snip] 7fe26ef09000-7fe26ef0a000 rw-p 00000000 00:00 0 7fe26ef0a000-7fe26ef0b000 rw-p 00000000 00:00 0 7fe26ef0b000-7fe26ef0c000 rw-p 00000000 00:00 0 7fe26ef0c000-7fe26ef0d000 rw-p 00000000 00:00 0 => 0x7fe26ef09000-0x7fe26ef0c000 have three vmas. result with this patch addr = 0x7fc9ebc76000 [snip] 7fc9ebc76000-7fc9ebc7a000 rw-p 00000000 00:00 0 7fffbe690000-7fffbe6a5000 rw-p 00000000 00:00 0 [stack] => 0x7fc9ebc76000-0x7fc9ebc7a000 have only one vma. [minchan.kim@gmail.com: fix file offset passed to vma_merge()] Signed-off-by: -
KOSAKI Motohiro authored
commit e815af95 ("change all_unreclaimable zone member to flags") changed all_unreclaimable member to bit flag. But it had an undesireble side effect. free_one_page() is one of most hot path in linux kernel and increasing atomic ops in it can reduce kernel performance a bit. Thus, this patch revert such commit partially. at least all_unreclaimable shouldn't share memory word with other zone flags. [akpm@linux-foundation.org: fix patch interaction] Signed-off-by:
-
Li Hong authored
free_hot_page() is just a wrapper around free_hot_cold_page() with parameter 'cold = 0'. After adding a clear comment for free_hot_cold_page(), it is reasonable to remove a level of call. [akpm@linux-foundation.org: fix build] Signed-off-by:
Li Hong <lihong.hi@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Ming Chun <macli@brc.ubc.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Li Hong authored
Move a call of trace_mm_page_free_direct() from free_hot_page() to free_hot_cold_page(). It is clearer and close to kmemcheck_free_shadow(), as it is done in function __free_pages_ok(). Signed-off-by:
-
Li Hong authored
trace_mm_page_free_direct() is called in function __free_pages(). But it is called again in free_hot_page() if order == 0 and produce duplicate records in trace file for mm_page_free_direct event. As below: K-PID CPU# TIMESTAMP FUNCTION gnome-terminal-1567 [000] 4415.246466: mm_page_free_direct: page=ffffea0003db9f40 pfn=1155800 order=0 gnome-terminal-1567 [000] 4415.246468: mm_page_free_direct: page=ffffea0003db9f40 pfn=1155800 order=0 gnome-terminal-1567 [000] 4415.246506: mm_page_alloc: page=ffffea0003db9f40 pfn=1155800 order=0 migratetype=0 gfp_flags=GFP_KERNEL gnome-terminal-1567 [000] 4415.255557: mm_page_free_direct: page=ffffea0003db9f40 pfn=1155800 order=0 gnome-terminal-1567 [000] 4415.255557: mm_page_free_direct: page=ffffea0003db9f40 pfn=1155800 order=0 This patch removes the first call and adds a call to trace_mm_page_free_direct() in __free_pages_ok(). Signed-off-by:
-
KOSAKI Motohiro authored
Commit cf40bd16 ("lockdep: annotate reclaim context") introduced reclaim context annotation. But it didn't annotate zone reclaim. This patch do it. The point is, commit cf40bd16 annotate __alloc_pages_direct_reclaim but zone-reclaim doesn't use __alloc_pages_direct_reclaim. current call graph is __alloc_pages_nodemask get_page_from_freelist zone_reclaim() __alloc_pages_slowpath __alloc_pages_direct_reclaim try_to_free_pages Actually, if zone_reclaim_mode=1, VM never call __alloc_pages_direct_reclaim in usual VM pressure. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
KOSAKI Motohiro authored
The get_scan_ratio() should have all scan-ratio related calculations. Thus, this patch move some calculation into get_scan_ratio. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by:
-
Minchan Kim authored
Kswapd checks that zone has sufficient pages free via zone_watermark_ok(). If any zone doesn't have enough pages, we set all_zones_ok to zero. !all_zone_ok makes kswapd retry rather than sleeping. I think the watermark check before shrink_zone() is pointless. Only after kswapd has tried to shrink the zone is the check meaningful. Move the check to after the call to shrink_zone(). [akpm@linux-foundation.org: fix comment, layout] Signed-off-by:
-
Jiri Slaby authored
Make sure compiler won't do weird things with limits. E.g. fetching them twice may return 2 different values after writable limits are implemented. I.e. either use rlimit helpers added in 3e10e716 ("resource: add helpers for fetching rlimits") or ACCESS_ONCE if not applicable. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
KOSAKI Motohiro authored
Currently, mlock_vma_pages_range() only return len or 0. then current error handling of mmap_region() is meaningless complex. This patch makes simplify and makes consist with brk() code. Signed-off-by:
-
KOSAKI Motohiro authored
Currently, mlock_vma_pages_range() never return negative value. Then, we can remove some worthless error check. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
A frequent questions from users about memory management is what numbers of swap ents are user for processes. And this information will give some hints to oom-killer. Besides we can count the number of swapents per a process by scanning /proc/<pid>/smaps, this is very slow and not good for usual process information handler which works like 'ps' or 'top'. (ps or top is now enough slow..) This patch adds a counter of swapents to mm_counter and update is at each swap events. Information is exported via /proc/<pid>/status file as [kamezawa@bluextal memory]$ cat /proc/self/status Name: cat State: R (running) Tgid: 2910 Pid: 2910 PPid: 2823 TracerPid: 0 Uid: 500 500 500 500 Gid: 500 500 500 500 FDSize: 256 Groups: 500 VmPeak: 82696 kB VmSize: 82696 kB VmLck: 0 kB VmHWM: 432 kB VmRSS: 432 kB VmData: 172 kB VmStk: 84 kB VmExe: 48 kB VmLib: 1568 kB VmPTE: 40 kB VmSwap: 0 kB <=============== this. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Considering the nature of per mm stats, it's the shared object among threads and can be a cache-miss point in the page fault path. This patch adds per-thread cache for mm_counter. RSS value will be counted into a struct in task_struct and synchronized with mm's one at events. Now, in this patch, the event is the number of calls to handle_mm_fault. Per-thread value is added to mm at each 64 calls. rough estimation with small benchmark on parallel thread (2threads) shows [before] 4.5 cache-miss/faults [after] 4.0 cache-miss/faults Anyway, the most contended object is mmap_sem if the number of threads grows. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: -
KAMEZAWA Hiroyuki authored
Presently, per-mm statistics counter is defined by macro in sched.h This patch modifies it to - defined in mm.h as inlinf functions - use array instead of macro's name creation. This patch is for reducing patch size in future patch to modify implementation of per-mm counter. Signed-off-by:
-
Akinobu Mita authored
Replace open-coded loop with for_each_set_bit(). Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by:
-
Akinobu Mita authored
Rename for_each_bit to for_each_set_bit in the kernel source tree. To permit for_each_clear_bit(), should that ever be added. The patch includes a macro to map the old for_each_bit() onto the new for_each_set_bit(). This is a (very) temporary thing to ease the migration. [akpm@linux-foundation.org: add temporary for_each_bit()] Suggested-by:
Alexey Dobriyan <adobriyan@gmail.com> Suggested-by:
-
David Miller authored
Use of get_irq_chip_data() et al. requires including linux/irq.h Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by:
-
Al Viro authored
We managed to lose O_DIRECTORY testing due to a stupid typo in commit 1f36f774 ("Switch !O_CREAT case to use of do_last()") Reported-by:
Walter Sheets <w41ter@gmail.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
- 05 Mar, 2010 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: SLUB: Fix per-cpu merge conflict failslab: add ability to filter slab caches slab: fix regression in touched logic dma kmalloc handling fixes slub: remove impossible condition slab: initialize unused alien cache entry as NULL at alloc_alien_cache(). SLUB: Make slub statistics use this_cpu_inc SLUB: this_cpu: Remove slub kmem_cache fields SLUB: Get rid of dynamic DMA kmalloc cache allocation SLUB: Use this_cpu operations in slub
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* 'nfs-for-2.6.34' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (44 commits) NFS: Remove requirement for inode->i_mutex from nfs_invalidate_mapping NFS: Clean up nfs_sync_mapping NFS: Simplify nfs_wb_page() NFS: Replace __nfs_write_mapping with sync_inode() NFS: Simplify nfs_wb_page_cancel() NFS: Ensure inode is always marked I_DIRTY_DATASYNC, if it has unstable pages NFS: Run COMMIT as an asynchronous RPC call when wbc->for_background is set NFS: Reduce the number of unnecessary COMMIT calls NFS: Add a count of the number of unstable writes carried by an inode NFS: Cleanup - move nfs_write_inode() into fs/nfs/write.c nfs41 fix NFS4ERR_CLID_INUSE for exchange id NFS: Fix an allocation-under-spinlock bug SUNRPC: Handle EINVAL error returns from the TCP connect operation NFSv4.1: Various fixes to the sequence flag error handling nfs4: renewd renew operations should take/put a client reference nfs41: renewd sequence operations should take/put client reference nfs: prevent backlogging of renewd requests nfs: kill renewd before clearing client minor version NFS: Make close(2) asynchronous when closing NFS O_DIRECT files NFS: Improve NFS iostat byte count accuracy for writes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Add hardlink support to .u extension 9P2010.L handshake: .L protocol negotiation 9P2010.L handshake: Remove "dotu" variable 9P2010.L handshake: Add mount option 9P2010.L handshake: Add VFS flags net/9p: Handle mount errors correctly. net/9p: Remove MAX_9P_CHAN limit net/9p: Add multi channel support.
-
