Do not explicity set the default input mode. Use the hardware default
of mode 0 ('Control vinyl'), which is now available.

This reverts commit e3ca4c99.
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

After removing code, only one case remains. So use an 'if' instead.
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This feature was undocumented on early A4DJ units. It is indicated
by lighting both the 'line' and 'phono' lamps at the same time.
Newer units document this and the newer Windows drivers enable this
for all units, so restore the functionality.

This patch simplifies the code and changes the mode mapping to match
the A8DJ, favouring simpler code and consistency over keeping the
existing mapping.

Both 'Control vinyl' and 'Phono' input modes enable the hardware
preamp. The difference is the input impedance.

This reverts commit 9a9527ed.
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix a small off-by-one bug which causes the feature unit to announce a
wrong number of channels. This leads to illegal requests sent to the
firmware eventually.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add hd radio blend functions. HPI version inc to 4.03.25.
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This request is again handled differently in comparison to UAC1.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

UAC2 devices have their information about pitch control stored in a
different field. Parse it, and emulate the bits for a v1 device.

A new struct uac2_iso_endpoint_descriptor is added.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

-1 is not a good return value as it means -EPERM, "not permitted".
Choose -ENOTSUPP instead, which is what the code really wants to tell
its callers.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a spin_unlock missing on the error path.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E1;
@@

* spin_lock(E1,...);
  <+... when != E1
  if (...) {
    ... when != E1
*   return ...;
  }
  ...+>
* spin_unlock(E1,...);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a module option to allow the GPR mixer controls to have the full
resolution of the hardware, i.e., 0...2^31-1 instead of 0...100.

Because of bugs in userspace tools like alsactl and alsamixer, this is
not yet enabled by default.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In the cleanup of the hw_ptr update functions in 2.6.33, the calculation
of the delta value was changed to use the modulo operator to protect
against a negative difference due to the pointer wrapping around at the
boundary.

However, the ptr variables are unsigned, so a negative difference would
result in the two complement's value which has no relation to the actual
difference relative to the boundary; the result is typically some value
near LONG_MAX-boundary.  Furthermore, even if the modulo operation would
be done with signed types, the result of a negative dividend could be
negative.

The invalid delta value is then caught by the following checks, but this
means that the pointer update is ignored.

To fix this, use a range check as in the other pointer calculations.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the VENDOR/DEVICE ids provided in pci_ids.h instead of creating
local ids of the same values.

Also, fix the following checkpatch.pl warnings:

WARNING: Use #include <linux/io.h> instead of <asm/io.h>
WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The decoding/encoding is based on own reverse-engineering. Both control and
data ports are handled. Writing to control port supports SysEx events only,
as this is the only type of messages that MPD16 recognizes.
Signed-off-by: Krzysztof Foltman <wdev@foltman.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit 7910b4a1 in 2.6.34 changed the
runtime->boundary calculation to make this value a multiple of both the
buffer_size and the period_size, because the latter is assumed by the
runtime->hw_ptr_interrupt calculation.

However, due to the lack of a ioctl that could read the software
parameters before they are set, the kernel requires that alsa-lib
calculates the boundary value, too.  The changed algorithm leads to
a different boundary value used by alsa-lib, which makes, e.g., mplayer
fail to play a 44.1 kHz file because the silence_size parameter is now
invalid; bug report:
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5015>.

This patch reverts the change to the boundary calculation, and instead
fixes the hw_ptr_interrupt calculation to be period-aligned regardless
of the boundary value.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (250 commits)
  ALSA: hda: Storage class should be before const qualifier
  ASoC: tpa6130a2: Remove CPVSS and HPVdd supplies
  ASoC: tpa6130a2: Define output pins with SND_SOC_DAPM_OUTPUT
  ASoC: sdp4430 - add sdp4430 pcm ops to DAI.
  ASoC: TWL6040: Enable earphone path in codec
  ASoC: SDP4430: Add support for Earphone speaker
  ASoC: SDP4430: Add sdp4430 machine driver
  ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF
  ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power function
  ALSA: sound/pci/asihpi: Use kzalloc
  ALSA: hdmi - dont fail on extra nodes
  ALSA: intelhdmi - add id for the CougarPoint chipset
  ALSA: intelhdmi - user friendly codec name
  ALSA: intelhdmi - add dependency on SND_DYNAMIC_MINORS
  ALSA: asihpi: incorrect range check
  ALSA: asihpi: testing the wrong variable
  ALSA: es1688: add pedantic range checks
  ARM: McBSP: Add support for omap4 in McBSP driver
  ARM: McBSP: Fix request for irq in OMAP4
  OMAP: McBSP: Add 32-bit mode support
  ...

* 'for-linus/i2c-2635' of git://git.fluff.org/bjdooks/linux: (21 commits)
  i2c-highlander: remover superflous variable
  i2c-ibm-iic: drop NO_IRQ
  i2c-cpm: drop NO_IRQ
  i2c-mpc: drop NO_IRQ
  MAINTAINERS: add i2c tree for embedded platforms
  i2c-pxa: only define 'blue_murder'-function if DEBUG is #defined
  i2c-pxa: remove unused macro
  i2c-nomadik: fix operator precedence warning
  i2c-nomadik: release region when removed
  OMAP3: I2C: Clean up Errata 1p153 handling
  OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  omap: i2c: add a timeout to the busy waiting
  omap: i2c: make errata 1.153 workaround a separate function
  i2c-omap: add mpu wake up latency constraint in i2c
  omap: i2c: Add i2c support on omap4 platform
  i2c-bfin-twi: return completion in interrupt for smbus quick transfers
  i2c-bfin-twi: remove redundant retry
  i2c-bfin-twi: fix lost interrupts at high speeds
  i2c-bfin-twi: add debug output for error status
  i2c-bfin-twi: integrate timeout timer with completion interface
  ...

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (534 commits)
  V4L/DVB (13554a): v4l: Use the video_drvdata function in drivers
  V4L/DVB: vivi and mem2mem_testdev need slab.h to build
  V4L/DVB: tm6000: bugfix image position
  V4L/DVB: IR/imon: remove dead IMON_KEY_RELEASE_OFFSET
  V4L/DVB: tm6000: README - add vbi
  V4L/DVB: Fix unlock logic at medusa_video_init
  V4L/DVB: fix dvb frontend lockup
  V4L/DVB: s2255drv: remove dead code
  V4L/DVB: s2255drv: return if vdev not found
  V4L/DVB: ov511: cleanup: remove unneeded null check
  V4L/DVB: media/mem2mem: dereferencing free memory
  V4L/DVB: media/IR: Add missing include file to rc-map.c
  V4L/DVB: dvb/stv6110x: cleanup error handling
  V4L/DVB: ngene: Add lgdt3303 and mt2131 deps to Kconfig
  V4L/DVB: ngene: start separating out DVB functions into separate file
  V4L/DVB: ngene: split out card specific code into a separate file
  V4L/DVB: ngene: split out i2c code into a separate file
  V4L/DVB: ngene: add initial support for digital side of Avermedia m780
  V4L/DVB: ngene: properly support boards where channel 0 isn't a TS input
  V4L-DVB: ngene: make sure that tuner headers are included
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (49 commits)
  libata-sff: separate out BMDMA qc_issue
  libata-sff: prd is BMDMA specific
  libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific
  libata-sff: separate out BMDMA EH
  libata-sff: port_task is SFF specific
  libata-sff: ap->[last_]ctl are SFF specific
  libata-sff: rename ap->ops->drain_fifo() to sff_drain_fifo()
  libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init()
  libata-sff: clean up BMDMA initialization
  libata-sff: clean up inheritance in several drivers
  libata-sff: reorder SFF/BMDMA functions
  sata_inic162x: kill PORT_PRD_ADDR initialization
  libata: kill ATA_FLAG_DISABLED
  libata-sff: kill unused prototype and make ata_dev_select() static
  libata-sff: update bmdma host bus error handling
  sata_mv: remove unnecessary initialization
  sata_inic162x: inic162x is not dependent on CONFIG_ATA_SFF
  pata_sch: use ata_pci_sff_init_one()
  pata_sil680: Do our own exec_command posting
  libata: Remove excess delay in the tf_load path
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits)
  pcmcia: disable PCMCIA ioctl also for ARM
  drivers/staging/comedi: dev_node removal (quatech_daqp_cs)
  drivers/staging/comedi: dev_node removal (ni_mio_cs)
  drivers/staging/comedi: dev_node removal (ni_labpc_cs)
  drivers/staging/comedi: dev_node removal (ni_daq_dio24)
  drivers/staging/comedi: dev_node removal (ni_daq_700)
  drivers/staging/comedi: dev_node removal (das08_cs)
  drivers/staging/comedi: dev_node removal (cb_das16_cs)
  pata_pcmcia: get rid of extra indirection
  pcmcia: remove suspend-related comment from yenta_socket.c
  pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held
  pcmcia: remove pcmcia_add_device_lock
  pcmcia: update gfp/slab.h includes
  pcmcia: remove unused mem_op.h
  pcmcia: do not autoadd root PCI bus resources
  pcmcia: clarify alloc_io_space, move it to resource handlers
  pcmcia: move all pcmcia_resource_ops providers into one module
  pcmcia: move high level CIS access code to separate file
  pcmcia: dev_node removal (core)
  pcmcia: dev_node removal (remaining drivers)
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: PM QOS update fix
  Freezer / cgroup freezer: Update stale locking comments
  PM / platform_bus: Allow runtime PM by default
  i2c: Fix bus-level power management callbacks
  PM QOS update
  PM / Hibernate: Fix block_io.c printk warning
  PM / Hibernate: Group swap ops
  PM / Hibernate: Move the first_sector out of swsusp_write
  PM / Hibernate: Separate block_io
  PM / Hibernate: Snapshot cleanup
  FS / libfs: Implement simple_write_to_buffer
  PM / Hibernate: document open(/dev/snapshot) side effects
  PM / Runtime: Add sysfs debug files
  PM: Improve device power management document
  PM: Update device power management document
  PM: Allow runtime_suspend methods to call pm_schedule_suspend()
  PM: pm_wakeup - switch to using bool

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: change cancel_work_sync() to clear work->data
  workqueue: warn about flush_scheduled_work()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  ia64: add sparse annotation to __ia64_per_cpu_var()
  percpu: implement kernel memory based chunk allocation
  percpu: move vmalloc based chunk management into percpu-vm.c
  percpu: misc preparations for nommu support
  percpu: reorganize chunk creation and destruction
  percpu: factor out pcpu_addr_in_first/reserved_chunk() and update per_cpu_ptr_to_phys()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/core: Use kmemdup() instead of kmalloc()+memcpy()
  IB/iser: Fix error flow in iser_create_ib_conn_res()
  IB/iser: Enhance disconnection logic for multi-pathing
  IB/iser: Remove buggy back-pointer setting
  IB/iser: Add asynchronous event handler
  MAINTAINERS: Add cxgb4 and iw_cxgb4 entries
  RDMA/cxgb3: Shrink .text with compile-time init of handlers arrays
  IPoIB: Allow disabling/enabling TSO on the fly through ethtool
  IB/mlx4: Add support for masked atomic operations
  IB/core: Add support for masked atomic operations
  RDMA/cma: Randomize local port allocation
  RDMA/nes: Make unnecessarily global functions static
  RDMA/nes: Make nesadapter->phy_lock usage consistent
  RDMA/cxgb4: Add driver for Chelsio T4 RNIC
  IB/mthca: Use the dma state API instead of pci equivalents
  RDMA/amso1100: Use the dma state API instead of pci equivalents
  RDMA/cxgb3: Don't free skbs on NET_XMIT_* indications from LLD
  RDMA/cxgb3: Use the dma state API instead of pci equivalents
  IB: Explicitly rule out llseek to avoid BKL in default_llseek()

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (61 commits)
  KEYS: Return more accurate error codes
  LSM: Add __init to fixup function.
  TOMOYO: Add pathname grouping support.
  ima: remove ACPI dependency
  TPM: ACPI/PNP dependency removal
  security/selinux/ss: Use kstrdup
  TOMOYO: Use stack memory for pending entry.
  Revert "ima: remove ACPI dependency"
  Revert "TPM: ACPI/PNP dependency removal"
  KEYS: Do preallocation for __key_link()
  TOMOYO: Use mutex_lock_interruptible.
  KEYS: Better handling of errors from construct_alloc_key()
  KEYS: keyring_serialise_link_sem is only needed for keyring->keyring links
  TOMOYO: Use GFP_NOFS rather than GFP_KERNEL.
  ima: remove ACPI dependency
  TPM: ACPI/PNP dependency removal
  selinux: generalize disabling of execmem for plt-in-heap archs
  LSM Audit: rename LSM_AUDIT_NO_AUDIT to LSM_AUDIT_DATA_NONE
  CRED: Holding a spinlock does not imply the holding of RCU read lock
  SMACK: Don't #include Ext2 headers
  ...

Conflicts:
	sound/soc/codecs/ad1938.c