- 17 May, 2017 6 commits
-
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-14-git-send-email-yamada.masahiro@socionext.com
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by:
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by:
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. While we are here, sort the touched parts with public headers first. mdp4_kms.h must declare struct device_node to be self-contained. Signed-off-by:
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by:
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by:
-
- 16 May, 2017 11 commits
-
-
Eric Anholt authored
BCM2835's PLLD_DSI1 divider doesn't give us many choices for our pixel clocks, so to support panels on the Raspberry Pi we need to set a higher pixel clock rate than requested and adjust the mode we program to extend out the HFP so that the refresh rate matches. v2: Drop an unfinished comment (caught by Noralf) Signed-off-by:
Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170511235625.22427-2-eric@anholt.netAcked-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in DRM_ERROR message and split over two lines to clean up a "line over 80 characters" checkpatch warning. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Eric Anholt authored
With the Cygnus port, we needed to add at least "|| ARCH_BCM_CYGNUS" to let the module get built on a cygnus-only kernel. However, I anticipate having a port for Kona soon, so just present the module on all of BCM. v2: Keep allowing selection with ARCH_BCM2835, since ARCH_BCM doesn't exist on arm64. Signed-off-by:Scott Branden <scott.branden@broadcom.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170509181539.30278-1-eric@anholt.net
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by:
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. While we are here, sort the touched parts alphabetically. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by:
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by:
-
Masahiro Yamada authored
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by:
-
Masahiro Yamada authored
For the C file, include <drm/*.h> instead of relative path from include/drm. For headers in include/drm/ttm, simplify the <tty/*.h> with "*.h". This allows us to remove the -Iinclude/drm compiler flag from drivers/gpu/drm/ttm/Makefile (and from other drivers' Makefiles). Signed-off-by:
-
Masahiro Yamada authored
-ENOSYS and -EINVAL are referenced in some static inline functions. of_drm_find_pane() takes a pointer to struct device_node. Make this header self-contained to not depend on specific include order. Signed-off-by:
-
Tomi Valkeinen authored
drm_blend.h is missing declaration for 'struct drm_plane'. Add it. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
- 15 May, 2017 2 commits
-
-
Chris Wilson authored
As we can have multiple tx in the queue, with individual waiters, make sure that all are woken when any state changes (so that we are sure the right owner of the txmsg is woken). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
Both as an exercise to document that we are reading the state outside of the appropriate mutex and to ensure that we only read the value once before the multiple comparisons, use READ_ONCE. Signed-off-by:
-
- 10 May, 2017 8 commits
-
-
Laura Abbott authored
We need a declaration of struct device to avoid warnings: In file included from include/drm/drm_file.h:38:0, from drivers/gpu/drm/drm_file.c:38: include/drm/drm_prime.h:71:14: warning: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration struct device *attach_dev); ^~~~~~ Forward declare it. Signed-off-by:Laura Abbott <labbott@redhat.com> Reviewed-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Daniel Vetter authored
In the previous patch we've implemented hwmode tracking a la i915 for the vblank timestamp calculations. But that was just the basic semantics, i915 has some nice sanity checks to make sure we keep getting this right. Move them over too. v2: - WARN_ON_ONCE to avoid excessive spam (Ville) - Really only WARN on atomic drivers. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-5-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
If we restrict this helper to only kms drivers (which is the case) we can look up the correct mode easily ourselves. But it's a bit tricky: - All legacy drivers look at crtc->hwmode. But that is updated already at the beginning of the modeset helper, which means when we disable a pipe. Hence the final timestamps might be a bit off. But since this is an existing bug I'm not going to change it, but just try to be bug-for-bug compatible with the current code. This only applies to radeon&amdgpu. - i915 tries to get it perfect by updating crtc->hwmode when the pipe is off (i.e. vblank->enabled = false). - All other atomic drivers look at crtc->state->adjusted_mode. Those that look at state->requested_mode simply don't adjust their mode, so it's the same. That has two problems: Accessing crtc->state from interrupt handling code is unsafe, and it's updated before we shut down the pipe. For nonblocking modesets it's even worse. For atomic drivers try to implement what i915 does. To do that we add a new hwmode field to the vblank structure, and update it from drm_calc_timestamping_constants(). For atomic drivers that's called from the right spot by the helper library already, so all fine. But for safety let's enforce that. For legacy driver this function is only called at the end (oh the fun), which is broken, so again let's not bother and just stay bug-for-bug compatible. The benefit is that we can use drm_calc_vbltimestamp_from_scanoutpos directly to implement ->get_vblank_timestamp in every driver, deleting a lot of code. v2: Completely new approach, trying to mimick the i915 solution. v3: Fixup kerneldoc. v4: Drop the WARN_ON to check that the vblank is off, atomic helpers currently unconditionally call this. Recomputing the same stuff should be harmless. v5: Fix typos and move misplaced hunks to the right patches (Neil). v6: Undo hunk movement (kbuild). Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Eric Anholt <eric@anholt.net> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
-
Daniel Vetter authored
This is going to be a bit too much, but good to have at least a small note about where this should all head towards. Acked-by:
-
Daniel Vetter authored
It's overkill to have a flag parameter which is essentially used just as a boolean. This takes care of core + adjusting drivers. Adjusting the scanout position callback is a bit harder, since radeon also supplies it's own driver-private flags in there. v2: Fixup misplaced hunks (Neil). v3: kbuild says v1 was better ... Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Eric Anholt <eric@anholt.net> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
-
Daniel Vetter authored
There's really no reason for anything more: - Calling this while the crtc vblank stuff isn't set up is a driver bug. Those places alrready DRM_ERROR. - Calling this when the crtc is off is either a driver bug (calling drm_crtc_handle_vblank at the wrong time) or a core bug (for anything else). Again, we DRM_ERROR. - EINVAL is checked at higher levels already, and if we'd use struct drm_crtc * instead of (dev, pipe) it would be real obvious that those are again core bugs. The only valid failure mode is crap hardware that couldn't sample a useful timestamp, to ask the core to just grab a not-so-accurate timestamp. Bool is perfectly fine for that. v2: Also fix up the one caller, I lost that in the shuffling (Jani). v3: Fixup commit message (Neil). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Eric Anholt <eric@anholt.net> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
-
Chris Wilson authored
With Laura's introduction of the fake platform device for importing dmabuf, we add a second static that is logically tied to the vgem_device. Convert vgem over to using the struct drm_device subclassing, so that the platform device is stored inside its owner. Signed-off-by:
-
Gustavo A. R. Silva authored
Local variable use_gct is assigned to a constant value and it is never updated again. Remove this variable and the dead code it guards. Addresses-Coverity-ID: 145690 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
- 09 May, 2017 10 commits
-
-
Markus Elfring authored
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/918229e6-80fe-629f-8fec-bf60ac15275f@users.sourceforge.net
-
Markus Elfring authored
Adjust this description for a function call. Signed-off-by:
-
Markus Elfring authored
Add a missing character in this description for a data structure. Signed-off-by:
-
Markus Elfring authored
Single characters should be put into a sequence at several places. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Some data were put into a sequence by separate function calls. Print the same data by five single function calls instead. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Nicolas Iooss authored
gdp_dbg_ctl() uses seq_printf() to display a color format name even though there is no format string. When using -Wformat-string, gcc reports the following warning: drivers/gpu/drm/sti/sti_gdp.c: In function 'gdp_dbg_ctl': drivers/gpu/drm/sti/sti_gdp.c:150:18: warning: format not a string literal and no format arguments [-Wformat-security] seq_printf(s, gdp_format_to_str[i].name); ^~~~~~~~~~~~~~~~~ Silence this warning by using seq_puts() instead. Signed-off-by:Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
-
Daniel Vetter authored
With all drivers converted there's only legacy dri1 drivers using it. Not going to touch those, instead just hide it like we've done with other dri1 driver hooks like firstopen. In all this I didn't find any real reason why we'd needed 2 hooks, and having symmetry between open and close just appeases my OCD better. Yeah, someone else could do an s/postclose/close/, but that's for someone who understands cocci. And maybe after this series is reviewed and landed, to avoid patch-regen churn. v2: s/last/post/close in the kernel-doc (Sean). Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Daniel Vetter authored
Again no apparent explanation for the split except hysterical raisins. Merging them also makes it a bit more obviuos what's going on wrt the runtime pm refdancing. Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
-
Daniel Vetter authored
I didn't spot anything that would require ordering here (well not anywhere else either), and I'm trying to unify at least modern drivers on one close hook. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org Reviewed-by:
-
Daniel Vetter authored
Again no apparent explanation for the split except hysterical raisins. Merging them also makes it a bit more obviuos what's going on wrt the runtime pm refdancing. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Reviewed-by:
-
- 08 May, 2017 3 commits
-
-
Tom Cooksey authored
This is a modesetting driver for the pl111 CLCD display controller found on various ARM platforms such as the Versatile Express. The driver has only been tested on the bcm911360_entphn platform so far, with PRIME-based buffer sharing between vc4 and clcd. It reuses the existing devicetree binding, while not using quite as many of its properties as the fbdev driver does (those are left for future work). v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks to DRM core's excellent new helpers. v3: Don't match pl110 any more, don't attach if we don't have a DRM panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple display helper, use drm_gem_cma_dumb_create (same as our wrapper). v4: Change the driver's .name to not clash with fbdev in sysfs, drop platform alias, drop redundant "drm" in DRM driver name, hook up .prepare_fb to the CMA helper so that DMA fences should work. v5: Move register definitions inside the driver directory, fix build in COMPILE_TEST and !AMBA mode. v6: Drop TIM2_CLKSEL for now to be consistent with existing DT bindings, switch back to external register definitions. Signed-off-by:Tom Cooksey <tom.cooksey@arm.com> Signed-off-by:
-
Eric Anholt authored
We'd like to reuse these register definitions for the DRM CLCD driver, but there's a bunch of fbdev-specific code in the current header. v2: Add #ifndef guard. Signed-off-by:
-
Eric Anholt authored
Cygnus has V3D 2.6 instead of 2.1, and doesn't use the VC4 display modules. The V3D can be uniquely identified by the IDENT[01] registers, and there's nothing to key off of for the display change other than the lack of DT nodes for the display components, but it's convention to have new compatible strings anyway. Signed-off-by:
Rob Herring <robh@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170428224223.21904-3-eric@anholt.net
-
