Patches from Anders Berg applied individually:

Here is version 4 of platform support for AXM5516 SoC.

The clk driver is now applied to clk-next. The rest should be ready for
arm-soc. Haven't got any response from the power/reset maintainers... I hope
this driver can be taken via arm-soc as well.

The AXM55xx family consists of devices that may contain up to 16 ARM Cortex-A15
cores (in a 4x4 cluster configuration). The cores within each cluster share an
L2 cache, and the clusters are connected to each other via a CCN-504 cache
coherent interconnect.

This machine requires CONFIG_ARM_LPAE enabled as all peripherals are located
above 4GB in the memory map.

* axxia/soc:
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ARM: dts: Device tree for AXM55xx.
  ARM: Add platform support for LSI AXM55xx SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add the reset controller to the AXM5xx device tree.
Signed-off-by: Anders Berg <anders.berg@lsi.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add Axxia (AXM55xx) SoC system reset driver. This driver handles only system
reboot (and not power-off).
Signed-off-by: Anders Berg <anders.berg@lsi.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add a defconfig file for the LSI Axxia family of devices (CONFIG_ARCH_AXXIA).
Signed-off-by: Anders Berg <anders.berg@lsi.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add device tree for the Amarillo validation board with an AXM5516 SoC.
Signed-off-by: Anders Berg <anders.berg@lsi.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The AXM55xx family consists of devices that may contain up to 16 ARM Cortex-A15
cores (in a 4x4 cluster configuration). The cores within each cluster share an
L2 cache, and the clusters are connected to each other via a CCN-504 cache
coherent interconnect.

This machine requires CONFIG_ARM_LPAE enabled as all peripherals are located
above 4GB in the memory map.
Signed-off-by: Anders Berg <anders.berg@lsi.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-3.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Merge "ARM: tegra: core code changes for 3.16" from Stephen Warren:

This branch contains just a single patch this time around. Thierry
enhanced Tegra's restart code to allow programming PMC scratch registers
to request specific behaviour after reboot. One of the most useful
options for mainline software is the ability to reboot directly into USB
recovery mode, which e.g. allows the bootloader to be reflashed.

* tag 'tegra-for-3.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Support reboot modes
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-soc-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Merge "ARM: imx: soc changes for 3.16" from Shawn Guo:

i.MX SoC changes for 3.16:
 - A few cleanups on mx21ads board file, which should make the later
   conversion to DT a little bit easier.
 - Add some missing clocks and drop unused clk lookups for i.MX1 and
   i.MX27 clock drivers
 - Add initial i.MX SoloX (imx6sx) SoC support
 - Remove mx51_babbage and mach-cpuimx51sd board files, as the
   equivalent DT support is ready for the boards
 - Clean up device tree timer initialization a little bit
 - Add missing i2c4 clock for i.MX6 DualLite/Solo
 - Add missing CKO clock i.MX25
 - Add shared gate clock support for i.MX specific clk_gate2
 - Add low-level debug support for SoC VF610
 - Some random code cleanups and defconfig updates

* tag 'imx-soc-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (33 commits)
  ARM: mx25: Add CLKO support
  ARM: i.MX1 clk: Remove clk_register_clkdev() for unused clocks
  ARM: i.MX1 clk: Add missing clocks
  ARM: imx: add basic imx6sx SoC support
  ARM: imx: add clock driver for imx6sx
  ARM: imx: add low-level debug support for imx6sx
  ARM: mx51: Remove mach-cpuimx51sd board file
  ARM: i.MX: Setup IRQ handler from IRQ driver
  ARM: i.MX27 pca100: remove deprecated IRQF_DISABLED
  ARM: imx/mxs defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
  ARM: i.MX: Fix eMMa PrP resource size
  ARM: imx_v4_v5_defconfig: drop CONFIG_COMMON_CLK_DEBUG option
  ARM: i.MX27 clk: Remove clk_register_clkdev() for unused clocks
  ARM: i.MX27 clk: Add missing clocks for MSHC and RTIC
  ARM: imx6q: add the missing esai_ahb clock
  ARM: imx: add shared gate clock support
  ARM: imx: lock is always valid for clk_gate2
  ARM: imx: define struct clk_gate2 on our own
  ARM: i.MX: Remove #ifdef CONFIG_OF
  ARM: imx_v6_v7_defconfig: enable option CONFIG_LOCALVERSION_AUTO
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "Allwinner SoCs core additions for 3.16" from Maxime Ripard:

Refactor the Kconfig options to have one Kconfig option per machine.

* tag 'sunxi-core-for-3.16' of https://github.com/mripard/linux:
  ARM: sunxi: select MFD_SUN6I_PRCM when sun6i arch support is enabled
  ARM: sunxi: Split the various SoCs support in Kconfig
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: STi: SoC changes for v3.16" from Maxime Coquelin:

SoC changes for STi platforms
 - Add support for STiH407

* tag 'sti-soc-for-v3.16' of git://git.stlinux.com/devel/kernel/linux-sti:
  ARM: STi: Add STiH407 SoC support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-soc-cleanup-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Renesas ARM Based SoC soc-cleanup Updates for v3.16" from Simon Horman:

r8a7791 (R-Car H2) SoC and its Koelsch board and,
r8a7740 (R-Mobile A1) SoC and its Armadillo800eva board
* Set CPU clock frequency from OF nodes

* tag 'renesas-soc-cleanup-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Set clock frequency in HZ from OF nodes
  ARM: shmobile: Use shmobile_init_late() on r8a7740
  ARM: shmobile: Remove unused r8a7791_init_early()
  ARM: shmobile: Use r8a7791 DT CPU Frequency for Koelsch
  ARM: shmobile: Use r8a7791 DT CPU Frequency in common case
  ARM: shmobile: Remove unused r8a7740_init_delay()
  ARM: shmobile: Use r8a7740 DT CPU Frequency for Armadillo DT Ref
  ARM: shmobile: Use r8a7740 DT CPU Frequency in common case
  ARM: shmobile: Add r8a7740 Maximum CPU Frequency to DTS
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-clock2-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Second Round of Renesas ARM Based SoC Clock Updates for v3.16" from
Simon Horman:

r8a7791 (R-Car M2) SoC
* Correct SYS-DMAC clock defines

r8a7740 (R-Mobile A1) SoC
* Correct name of DT Ethernet clock

* tag 'renesas-clock2-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7791: Correct SYS-DMAC clock defines
  ARM: shmobile: r8a7740: Correct name of DT Ethernet clock
Signed-off-by: Olof Johansson <olof@lixom.net>

Bring in the cleanup branch due to conflicts in new additions. Should really
have been the base before the other branch, but this way works too.

* cleanup/kconfig:
  ARM: qcom: clean-up unneeded kconfig selects
  ARM: bcm: clean-up unneeded kconfig selects
  ARM: mvebu: clean-up unneeded kconfig selects
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: mvebu: SoC changes for v3.16" from Jason Cooper:

mvebu SoC changes for v3.16

 - Armada 375/38x coherency support
 - Armada 375/38x SMP support
 - mvebu PMSU and CPU reset support
 - Armada 370/XP cpuidle support
 - kirkwood remove platform init of audio device
 - small fixes and cleanup for new SoC (375/38x)

Note:
 - due to complex deps, cpuidle changes Acked by appropriate maintainer for
   going though arm-soc tree.

* tag 'mvebu-soc-3.16' of git://git.infradead.org/linux-mvebu: (46 commits)
  ARM: mvebu: Fix pmsu compilation when ARMv6 is selected
  ARM: mvebu: conditionalize Armada 375 coherency workaround
  ARM: mvebu: conditionalize Armada 375 SMP workaround
  ARM: mvebu: add Armada 375 A0 revision definition
  ARM: mvebu: initialize mvebu-soc-id earlier
  ARM: mvebu: fix thermal quirk SoC revision check
  ARM: Kirkwood: t5325: Remove platform device to instantiate audio
  ARM: Kirkwood: Remove platform driver for codec
  ARM: mvebu: Add thermal quirk for the Armada 375 DB board
  ARM: mvebu: Select HAVE_ARM_TWD only if SMP is enabled
  ARM: mvebu: fix the name of the parameter used in mvebu_get_soc_id
  ARM: mvebu: remove unnecessary ifdef around l2x0_of_init
  ARM: mvebu: register the cpuidle driver for the Armada XP SoCs
  cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC
  ARM: mvebu: Register notifier callback for the cpuidle transition
  ARM: mvebu: refine which files are build in mach-mvebu
  ARM: mvebu: Add the PMSU related part of the cpu idle functions
  ARM: mvebu: Allow to power down L2 cache controller in idle mode
  ARM: mvebu: Low level function to disable HW coherency support
  ARM: mvebu: Split low level functions to manipulate HW coherency
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: mvebu: SoC orion5x DT conversion for v3.16" from Jason Cooper:

mvebu SoC orion5x DT conversion for v3.16

 - orion5x
    - convert to DT

* tag 'mvebu-soc-orion5x-3.16' of git://git.infradead.org/linux-mvebu: (29 commits)
  ARM: orion: remove no longer needed gpio DT code
  ARM: orion: remove no longer needed DT IRQ code
  ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree
  ARM: orion5x: convert d2net to Device Tree
  ARM: orion5x: convert RD-88F5182 to Device Tree
  ARM: orion5x: remove unneeded code for edmini_v2
  ARM: orion5x: keep TODO list in edmini_v2 DT
  ARM: orion5x: use DT to describe NOR on edmini_v2
  ARM: orion5x: use DT to describe EHCI on edmini_v2
  ARM: orion5x: use DT to describe I2C devices on edmini_v2
  ARM: orion5x: convert edmini_v2 to DT pinctrl
  ARM: orion5x: add standard pinctrl configs for sata0 and sata1
  ARM: orion5x: add Device Bus description at SoC level
  ARM: orion5x: update I2C description at SoC level
  ARM: orion5x: enable pinctrl driver at SoC level
  ARM: orion5x: switch to DT interrupts and timer
  ARM: orion: switch to a per-platform handle_irq() function
  ARM: orion5x: convert to use 'clocks' property for UART controllers
  ARM: orion5x: switch to use the clock driver for DT platforms
  ARM: orion5x: add interrupt for Ethernet in Device Tree
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds support to STiH407 SoC.
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

Merge "at91: cleanup for 3.16 #1" from Nicolas Ferre:

First cleanup series for 3.15
- localize GPIO header in mach-at91 directory
- big update on the CCF front with main and slow clocks
- a cleanup of ADC and touchscreen driver with unification on IIO and
  removal of old driver

[olof: Most of this branch is new code, not cleanups, so I'm merging this into
the SoC branch in spite of the branch name]

* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: (28 commits)
  ARM: at91/dt: at91-cosino_mega2560 remove useless tsadcc node
  ARM: at91: remove atmel_tsadcc platform_data
  Input: atmel_tsadcc: remove driver
  ARM: at91: remove atmel_tsadcc from sama5_defconfig
  ARM: at91: sam9rl: switch from atmel_tsadcc to at91_adc
  ARM: at91: sam9g45: switch from atmel_tsadcc to at91_adc
  ARM: at91: sam9rlek add touchscreen support through at91_adc
  ARM: at91: sam9rl: add at91_adc to support adc and touchscreen
  iio: adc: at91: add sam9rl support
  iio: adc: at91: remove unused include from include/mach
  ARM: at91: sam9m10g45ek: Add touchscreen support through at91_adc
  iio: adc: at91_adc: Add support for touchscreens without TSMR
  iio: adc: at91: cleanup platform_data
  ARM: at91: sam9260: remove unused platform_data
  ARM: at91: sam9g45: remove unused platform_data
  ARM: at91/dt: define sam9rlek crystal frequencies
  ARM: at91/dt: move at91sam9rl SoC to the new slow/main clock models
  ARM: at91/dt: define main xtal frequency of the at91sam9261ek board
  ARM: at91/dt: move at91sam9261 SoC to the new main clock model
  ARM: at91/dt: add xtal frequencies to sama5d3 xplained board
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

CLKO support is a clock output on mx25 which can output many of the internal
clock sources. It is useful for debugging purpose or also for driving the
audio codec for example.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

This patch removes clk_register_clkdev() for the clocks that do not
have any users from boards and drivers.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

This patch adds missing clocks for mpll_gate, spll_gate, uart3_gate,
ssi2_gate and brom_gate. As an additional this fixes incorrect bit
position for dma_gate clock.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Add basic suppport for i.MX6 SoloX SoC.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Add clock driver for i.MX6 SoloX SoC.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Enable low-level debug support for i.MX6 SoloX by adding the debug
port definitions for the SoC.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Select the MFD_SUN6I_PRCM option when sun6i arch is enabled in order to get
the PRCM (Power/Reset/Clock Management) related drivers compiled.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

shmobile_init_delay() looks for OF "clock-frequency" to determine
the delay which is set by calling shmobile_setup_delay().

Unfortunately this seems to be incorrect in detail as
"clock-frequency" node values are in HZ whereas the frequency
argument to shmobile_setup_delay() is in MHz.

Provide a variant of shmobile_setup_delay() that accepts HZ to
correct this problem.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Hook up ->init_late for r8a7740 to initialize Suspend-to-RAM
and CPUIdle in case of C-code less board support for r8a7740.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

eukrea_mbimxsd51-baseboard.c and mach-cpuimx51sd.c can be replaced with their
devicetree equivalents: imx51-eukrea-mbimxsd51-baseboard.dts and
imx51-eukrea-cpuimx51.dtsi respectively, so remove the board files.

This allows the conversion of mx51 to a devicetree-only platform.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

R-Car M2 has two MSTP bits for SYS-DMAC, not one.
Also bring the naming in sync with the documentation.

This issue was introduced in v3.14, in commit
4d8864c9 ("ARM: shmobile: r8a7791: Add
clock index macros for DT sources").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch moves IRQ handler setup to the its corresponded IRQ
driver (AVIC, TZIC).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

This flag is a NOOP and can be removed now.
Signed-off-by: Juan Solano <jsm@jsolano.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

These defconfigs contain the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
the new dependency.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Last address for eMMa PrP is 0x80...0x83, so increase resource size
for eMMa to 256.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The option COMMON_CLK_DEBUG was removed by commit ea72dc2c (clk: remove
CONFIG_COMMON_CLK_DEBUG), so let's remove CONFIG_COMMON_CLK_DEBUG from
the defconfig.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

This patch removes clk_register_clkdev() for the clocks that do not
have any users for non-DT boards and drivers.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

This patch adds missing clocks handling for the Memory Stick Host
Controller (MSHC) and Run-Time Integrity Checker (RTIC).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The esai_ahb clock is derived from ahb and used to provide ESAI the
capability of register accessing and FSYS clock source for I2S clocks
dividing.  The gate bits of this esai_ahb clock are shared with the
esai clock -- the baud clock, so we need to call imx_clk_gate2_shared()
for these two clocks.
Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

It's quite common on i.MX that one gate bit controls the gating of
multiple clocks, i.e. this is a shared gate.  The patch adds the
function imx_clk_gate2_shared() for such case.  The clocks controlled
by the same gate bits should call this function with a pointer to a
single share count variable, so that the gate bits will only be
operated on the first enabling and the last disabling of these shared
gate clocks.

Thanks to Gerhard Sittig <gsi@denx.de> for this idea.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The imx specific clk_gate2 always has a valid lock with the clock.  So
the validation on gate->lock is not really needed.  Remove it.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The imx clk-gate2 driver implements an i.MX specific gate clock, which
has two bits controlling the gate states.  While this is a completely
separate gate driver from the common clk-gate one, it reuses the common
clk_gate structure.  Such reusing makes the extending of clk_gate2
clumsy.  Let's define struct clk_gate2 on our own to make the driver
independent of the common clk-gate one, and ease the clk_gate2 extending
at a later time.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

CONFIG_OF is always selected for i.MX.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>