The K3 AM65x family of SoCs have the next generation of the PRU-ICSS
processor subsystem capable of supporting Gigabit Ethernet, and is
commonly referred to as ICSSG. These SoCs contain typically three
ICSSG instances named ICSSG0, ICSSG1 and ICSSG2. The three ICSSGs are
identical to each other for the most part with minor SoC integration
differences and capabilities. The ICSSG2 supports slightly enhanced
features like SGMII mode Ethernet, while the ICSS0 and ICSSG1 instances
are limited to MII mode only.

The ICSSGs on K3 AM65x SoCs are in general super-sets of the PRUSS on the
AM57xx/66AK2G SoCs. They include two additional auxiliary PRU cores called
RTUs and few other additional sub-modules. The interrupt integration is
also different on the K3 AM65x SoCs and are propagated through various
SoC-level Interrupt Router and Interrupt Aggregator blocks. Other IP level
differences include different constant tables, differences in system event
interrupt input sources etc. They also do not have a programmable module
reset line like those present on AM33xx/AM43xx SoCs. The modules are reset
just like any other IP with the SoC's global cold/warm resets.

The existing pruss platform driver has been updated to support these new
ICSSG instances through new AM65x specific compatibles. A build dependency
with ARCH_K3 is added to enable building all the existing PRUSS platform
drivers for this ARMv8 platform.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

The 66AK2G SoC supports two PRU-ICSS instances, named PRUSS0 and PRUSS1,
each of which has two PRU processor cores. The two PRU-ICSS instances
are identical to each other with few minor SoC integration differences,
and are very similar to the PRU-ICSS1 of AM57xx/AM43xx. The Shared Data
RAM size is larger and the number of interrupts coming into MPU INTC
is like the instances on AM437x. There are also few other differences
attributing to integration in Keystone architecture (like no SYSCFG
register or PRCM handshake protocols). Other IP level differences
include different constant table, differences in system event interrupt
input sources etc. They also do not have a programmable module reset
line like those present on AM33xx/AM43xx SoCs. The modules are reset
just like any other IP with the SoC's global cold/warm resets.

The existing PRUSS platform driver has been enhanced to support these
66AK2G PRU-ICSS instances through new 66AK2G specific compatible for
properly probing and booting all the different PRU cores in each
PRU-ICSS processor subsystem. A build dependency with ARCH_KEYSTONE
is added to enable the driver to be built in K2G-only configuration.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

The AM57xx family of SoCs supports two PRU-ICSS instances, each of
which has two PRU processor cores. The two PRU-ICSS instances are
identical to each other, and are very similar to the PRU-ICSS1 of
AM33xx/AM43xx except for a few minor differences like the RAM sizes
and the number of interrupts coming into the MPU INTC. They do
not have a programmable module reset line unlike those present on
AM33xx/AM43xx SoCs. The modules are reset just like any other IP
with the SoC's global cold/warm resets. Each PRU-ICSS's INTC is also
preceded by a Crossbar that enables multiple external events to be
routed to a specific number of input interrupt events. Any interrupt
event directed towards PRUSS needs this crossbar to be setup properly
on the firmware side.

The existing PRUSS platform driver has been enhanced to support
these AM57xx PRU-ICSS instances through new AM57xx specific
compatible for properly probing and booting all the different PRU
cores in each PRU-ICSS processor subsystem. A build dependency with
SOC_DRA7XX is also added to enable the driver to be built in
AM57xx-only configuration (there is no separate Kconfig option
for AM57xx vs DRA7xx).
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

The AM437x SoCs have two different PRU-ICSS subsystems: PRU-ICSS1
and a smaller PRU-ICSS0. Enhance the PRUSS platform driver to support
both the PRU-ICSS sub-systems on these SoCs.

The PRU-ICSS1 on AM437x is very similar to the PRU-ICSS on AM33xx
except for few minor differences - increased Instruction RAM, increased
Shared Data RAM2, and 1 less interrupt (PRUSS host interrupt 7 which is
redirected to the other PRUSS) towards the MPU INTC. The PRU-ICSS0 is
a cut-down version of the IP, with less DRAM per PRU, no Shared DRAM etc.
It also does not have direct access to L3 bus regions, there is a single
interface to L3 for both PRUSS0 and PRUSS1, and it would have to go
through the PRUSS1's interface. The PRUSS_SYSCFG register is reserved on
PRUSS0, so any external access requires the programming the corresponding
PRUSS_SYSCFG register in PRUSS1. It does have its own dedicated I/O lines
though. Note that this instance does not support any PRU Ethernet related
use cases.

The adaptation uses SoC-specific compatibles in the driver and uses
a newly introduced pruss_match_private_data structure and the
pruss_get_private_data() function to retrieve a PRUSS instance specific
data using a device-name based lookup logic. The reset and the L3 external
access are managed by the parent interconnect ti-sysc bus driver so that
PRUSS1 and PRUSS0 can be independently supported.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

The Programmable Real-Time Unit - Industrial Communication
Subsystem (PRU-ICSS) is present on various TI SoCs such as
AM335x or AM437x or the Keystone 66AK2G. Each SoC can have
one or more PRUSS instances that may or may not be identical.
For example, AM335x SoCs have a single PRUSS, while AM437x has
two PRUSS instances PRUSS1 and PRUSS0, with the PRUSS0 being
a cut-down version of the PRUSS1.

The PRUSS consists of dual 32-bit RISC cores called the
Programmable Real-Time Units (PRUs), some shared, data and
instruction memories, some internal peripheral modules, and
an interrupt controller. The programmable nature of the PRUs
provide flexibility to implement custom peripheral interfaces,
fast real-time responses, or specialized data handling.

The PRU-ICSS functionality is achieved through three different
platform drivers addressing a specific portion of the PRUSS.
Some sub-modules of the PRU-ICSS IP reuse some of the existing
drivers (like davinci mdio driver or the generic syscon driver).
This design provides flexibility in representing the different
modules of PRUSS accordingly, and at the same time allowing the
PRUSS driver to add some instance specific configuration within
an SoC.

The PRUSS platform driver deals with the overall PRUSS and is
used for managing the subsystem level resources like various
memories and the CFG module. It is responsible for the creation
and deletion of the platform devices for the child PRU devices
and other child devices (like Interrupt Controller, MDIO node
and some syscon nodes) so that they can be managed by specific
platform drivers. The PRUSS interrupt controller is managed by
an irqchip driver, while the individual PRU RISC cores are
managed by a PRU remoteproc driver.

The driver currently supports the AM335x SoC, and support for
other TI SoCs will be added in subsequent patches.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

This patch adds the bindings for the Programmable Real-Time Unit
and Industrial Communication Subsystem (PRU-ICSS) present on various
TI SoCs. The IP is present on multiple TI SoC architecture families
including the OMAP architecture SoCs such as AM33xx, AM437x and
AM57xx; and on a Keystone 2 architecture based 66AK2G SoC. It is
also present on the Davinci based OMAPL138 SoCs and K3 architecture
based AM65x and J721E SoCs as well.

The IP has a number of sub-modules some of which are represented as
their own devices. This binding covers only the top-level sub-system
devices, and some sub-modules like MDIO, MII_RT (Ethernet MII_RT module
with MII ports) and IEP (Industrial Ethernet Peripheral). The remaining
sub-modules bindings shall be defined in the respective driver
subsystem bindings folders. Couple of full examples have also been
added demonstrating the devices on AM335x and AM437x SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

Remove "ti,dma-ring-reset-quirk" DT property as proper w/a handling is
implemented now in Ringacc driver using SoC info.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

The AM65x SR2.0 Ringacc has fixed errata i2023 "RINGACC, UDMA: RINGACC and
UDMA Ring State Interoperability Issue after Channel Teardown". This errata
also fixed for J271E SoC.

Use SOC bus data for K3 SoC identification and enable i2023 errate w/a only
for the AM65x SR1.0. This also makes obsolete "ti,dma-ring-reset-quirk" DT
property.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

Pull io_uring fixes from Jens Axboe:
 "A few differerent things in here.

  Seems like syzbot got some more io_uring bits wired up, and we got a
  handful of reports and the associated fixes are in here.

  General fixes too, and a lot of them marked for stable.

  Lastly, a bit of fallout from the async buffered reads, where we now
  more easily trigger short reads. Some applications don't really like
  that, so the io_read() code now handles short reads internally, and
  got a cleanup along the way so that it's now easier to read (and
  documented). We're now passing tests that failed before"

* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
  io_uring: short circuit -EAGAIN for blocking read attempt
  io_uring: sanitize double poll handling
  io_uring: internally retry short reads
  io_uring: retain iov_iter state over io_read/io_write calls
  task_work: only grab task signal lock when needed
  io_uring: enable lookup of links holding inflight files
  io_uring: fail poll arm on queue proc failure
  io_uring: hold 'ctx' reference around task_work queue + execute
  fs: RWF_NOWAIT should imply IOCB_NOIO
  io_uring: defer file table grabbing request cleanup for locked requests
  io_uring: add missing REQ_F_COMP_LOCKED for nested requests
  io_uring: fix recursive completion locking on oveflow flush
  io_uring: use TWA_SIGNAL for task_work uncondtionally
  io_uring: account locked memory before potential error case
  io_uring: set ctx sq/cq entry count earlier
  io_uring: Fix NULL pointer dereference in loop_rw_iter()
  io_uring: add comments on how the async buffered read retry works
  io_uring: io_async_buf_func() need not test page bit

Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.

Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.

Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:
 "A few fixes on the block side of things:

   - Discard granularity fix (Coly)

   - rnbd cleanups (Guoqing)

   - md error handling fix (Dan)

   - md sysfs fix (Junxiao)

   - Fix flush request accounting, which caused an IO slowdown for some
     configurations (Ming)

   - Properly propagate loop flag for partition scanning (Lennart)"

* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
  block: fix double account of flush request's driver tag
  loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
  rnbd: no need to set bi_end_io in rnbd_bio_map_kern
  rnbd: remove rnbd_dev_submit_io
  md-cluster: Fix potential error pointer dereference in resize_bitmaps()
  block: check queue's limits.discard_granularity in __blkdev_issue_discard()
  md: get sysfs entry after redundancy attr group create

Pull RISC-V fix from Palmer Dabbelt:
 "I collected a single fix during the merge window: we managed to break
  the early trap setup on !MMU, this fixes it"

* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Setup exception vector for nommu platform

Pull arch/sh updates from Rich Felker:
 "Cleanup, SECCOMP_FILTER support, message printing fixes, and other
  changes to arch/sh"

* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
  sh: landisk: Add missing initialization of sh_io_port_base
  sh: bring syscall_set_return_value in line with other architectures
  sh: Add SECCOMP_FILTER
  sh: Rearrange blocks in entry-common.S
  sh: switch to copy_thread_tls()
  sh: use the generic dma coherent remap allocator
  sh: don't allow non-coherent DMA for NOMMU
  dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
  sh: unexport register_trapped_io and match_trapped_io_handler
  sh: don't include <asm/io_trapped.h> in <asm/io.h>
  sh: move the ioremap implementation out of line
  sh: move ioremap_fixed details out of <asm/io.h>
  sh: remove __KERNEL__ ifdefs from non-UAPI headers
  sh: sort the selects for SUPERH alphabetically
  sh: remove -Werror from Makefiles
  sh: Replace HTTP links with HTTPS ones
  arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
  sh: stacktrace: Remove stacktrace_ops.stack()
  sh: machvec: Modernize printing of kernel messages
  sh: pci: Modernize printing of kernel messages
  ...

One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.

Fixes: 227c0c96 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.

Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().

Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.

Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com
Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull more perf tools updates from Arnaldo Carvalho de Melo:
 "Fixes:
   - Fixes for 'perf bench numa'.

   - Always memset source before memcpy in 'perf bench mem'.

   - Quote CC and CXX for their arguments to fix build in environments
     using those variables to pass more than just the compiler names.

   - Fix module symbol processing, addressing regression detected via
     "perf test".

   - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf
     test' entry.

  Improvements:
   - Add script to autogenerate socket family name id->string table from
     copy of kernel header, used so far in 'perf trace'.

   - 'perf ftrace' improvements to provide similar options for this
     utility so that one can go from 'perf record', 'perf trace', etc to
     'perf ftrace' just by changing the name of the subcommand.

   - Prefer new "sched:sched_waking" trace event when it exists in 'perf
     sched' post processing.

   - Update POWER9 metrics to utilize other metrics.

   - Fall back to querying debuginfod if debuginfo not found locally.

  Miscellaneous:
   - Sync various kvm headers with kernel sources"

* tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits)
  perf ftrace: Make option description initials all capital letters
  perf build-ids: Fall back to debuginfod query if debuginfo not found
  perf bench numa: Remove dead code in parse_nodes_opt()
  perf stat: Update POWER9 metrics to utilize other metrics
  perf ftrace: Add change log
  perf: ftrace: Add set_tracing_options() to set all trace options
  perf ftrace: Add option --tid to filter by thread id
  perf ftrace: Add option -D/--delay to delay tracing
  perf: ftrace: Allow set graph depth by '--graph-opts'
  perf ftrace: Add support for trace option tracing_thresh
  perf ftrace: Add option 'verbose' to show more info for graph tracer
  perf ftrace: Add support for tracing option 'irq-info'
  perf ftrace: Add support for trace option funcgraph-irqs
  perf ftrace: Add support for trace option sleep-time
  perf ftrace: Add support for tracing option 'func_stack_trace'
  perf tools: Add general function to parse sublevel options
  perf ftrace: Add option '--inherit' to trace children processes
  perf ftrace: Show trace column header
  perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
  perf ftrace: Factor out function write_tracing_file_int()
  ...

Pull x86 fixes from Ingo Molnar:
 "Misc fixes and small updates all around the place:

   - Fix mitigation state sysfs output

   - Fix an FPU xstate/sxave code assumption bug triggered by
     Architectural LBR support

   - Fix Lightning Mountain SoC TSC frequency enumeration bug

   - Fix kexec debug output

   - Fix kexec memory range assumption bug

   - Fix a boundary condition in the crash kernel code

   - Optimize porgatory.ro generation a bit

   - Enable ACRN guests to use X2APIC mode

   - Reduce a __text_poke() IRQs-off critical section for the benefit of
     PREEMPT_RT"

* tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Acquire pte lock with interrupts enabled
  x86/bugs/multihit: Fix mitigation reporting when VMX is not in use
  x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
  x86/purgatory: Don't generate debug info for purgatory.ro
  x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC
  kexec_file: Correctly output debugging information for the PT_LOAD ELF header
  kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges
  x86/crash: Correct the address boundary of function parameters
  x86/acrn: Remove redundant chars from ACRN signature
  x86/acrn: Allow ACRN guest to use X2APIC mode

Pull scheduler fixes from Ingo Molnar:
 "Two fixes: fix a new tracepoint's output value, and fix the formatting
  of show-state syslog printouts"

* tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Fix the alignment of the show-state debug output
  sched: Fix use of count for nr_running tracepoint

Pull perf fixes from Ingo Molnar:
 "Misc fixes, an expansion of perf syscall access to CAP_PERFMON
  privileged tools, plus a RAPL HW-enablement for Intel SPR platforms"

* tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/rapl: Add support for Intel SPR platform
  perf/x86/rapl: Support multiple RAPL unit quirks
  perf/x86/rapl: Fix missing psys sysfs attributes
  hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration
  kprobes: Remove show_registers() function prototype
  perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability

Pull locking fixlets from Ingo Molnar:
 "A documentation fix and a 'fallthrough' macro update"

* tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Convert to use the preferred 'fallthrough' macro
  Documentation/locking/locktypes: Fix a typo

Pull 9p updates from Dominique Martinet:

 - some code cleanup

 - a couple of static analysis fixes

 - setattr: try to pick a fid associated with the file rather than the
   dentry, which might sometimes matter

* tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux:
  9p: Remove unneeded cast from memory allocation
  9p: remove unused code in 9p
  net/9p: Fix sparse endian warning in trans_fd.c
  9p: Fix memory leak in v9fs_mount
  9p: retrieve fid from file when file instance exist.

Pull cifs fixes from Steve French:
 "Three small cifs/smb3 fixes, one for stable fixing mkdir path with
  the 'idsfromsid' mount option"

* tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  SMB3: Fix mkdir when idsfromsid configured on mount
  cifs: Convert to use the fallthrough macro
  cifs: Fix an error pointer dereference in cifs_mount()

Pull NFS client updates from Trond Myklebust:
 "Stable fixes:
   - pNFS: Don't return layout segments that are being used for I/O
   - pNFS: Don't move layout segments off the active list when being used for I/O

  Features:
   - NFS: Add support for user xattrs through the NFSv4.2 protocol
   - NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC
   - NFSv4.0 allow nconnect for v4.0

  Bugfixes and cleanups:
   - nfs: ensure correct writeback errors are returned on close()
   - nfs: nfs_file_write() should check for writeback errors
   - nfs: Fix getxattr kernel panic and memory overflow
   - NFS: Fix the pNFS/flexfiles mirrored read failover code
   - SUNRPC: dont update timeout value on connection reset
   - freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
   - sunrpc: destroy rpc_inode_cachep after unregister_filesystem"

* tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits)
  NFS: Fix flexfiles read failover
  fs: nfs: delete repeated words in comments
  rpc_pipefs: convert comma to semicolon
  nfs: Fix getxattr kernel panic and memory overflow
  NFS: Don't return layout segments that are in use
  NFS: Don't move layouts to plh_return_segs list while in use
  NFS: Add layout segment info to pnfs read/write/commit tracepoints
  NFS: Add tracepoints for layouterror and layoutstats.
  NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close()
  SUNRPC dont update timeout value on connection reset
  nfs: nfs_file_write() should check for writeback errors
  nfs: ensure correct writeback errors are returned on close()
  NFSv4.2: xattr cache: get rid of cache discard work queue
  NFS: remove redundant initialization of variable result
  NFSv4.0 allow nconnect for v4.0
  freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
  sunrpc: destroy rpc_inode_cachep after unregister_filesystem
  NFSv4.2: add client side xattr caching.
  NFSv4.2: hook in the user extended attribute handlers
  NFSv4.2: add the extended attribute proc functions.
  ...

Pull edac fix from Tony Luck:
 "Fix for the ie31200 driver that missed the first pull"

* tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ie31200: Fallback if host bridge device is already initialized

Pull devicetree fixes from Rob Herring:
 "Another round of 'allOf' removals and whitespace clean-ups of schemas"

* tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Remove more cases of 'allOf' containing a '$ref'
  dt-bindings: Whitespace clean-ups in schema files

Pull more ACPI updates from Rafael Wysocki:
 "Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk
  driver and the Designware i2c driver (changes from Akshu Agrawal and
  Pu Wen)"

* tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  clk: x86: Support RV architecture
  ACPI: APD: Add a fmw property is_raven
  clk: x86: Change name from ST to FCH
  ACPI: APD: Change name from ST to FCH
  i2c: designware: Add device HID for Hygon I2C controller

Pull one more power management update from Rafael Wysocki:
 "Modify the intel_pstate driver to allow it to work in the passive mode
  with hardware-managed P-states (HWP) enabled"

* tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Implement passive mode with HWP enabled

Pull MFD updates from Lee Jones:
 "Core Frameworks
   - Make better attempt at matching device with the correct OF node
   - Allow batch removal of hierarchical sub-devices

  New Drivers
   - Add STM32 Clocksource driver
   - Add support for Khadas System Control Microcontroller

  Driver Removal
   - Remove unused driver for TI's SMSC ECE1099

  New Device Support
   - Add support for Intel Emmitsburg PCH to Intel LPSS PCI
   - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
   - Add support for Dialog DA revision to Dialog DA9063

  New Functionality
   - Add support for AXP803 to be probed by I2C

  Fix-ups
   - Numerous W=1 warning fixes
   - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
   - Enabled Regmap 'fast I/O' in stm32-lptimer
   - Change BUG_ON to WARN_ON in arizona-core
   - Remove superfluous code/initialisation (madera, max14577)
   - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
   - Switch to of_platform_populate() in sprd-sc27xx-spi
   - Expand out set/get brightness/pwm macros in lm3533-ctrlbank
   - Disable IRQs on suspend in motorola-cpcap
   - Clean-up error handling in intel_soc_pmic_mrfld
   - Ensure correct removal order of sub-devices in madera
   - Many s/HTTP/HTTPS/ link changes
   - Ensure name used with Regmap is unique in syscon

  Bug Fixes
   - Properly 'put' clock on unbind and error in arizona-core
   - Fix revision handling in da9063
   - Fix 'assignment of read-only location' error in kempld-core
   - Avoid using the Regmap API when atomic in rn5t618
   - Redefine volatile register description in rn5t618
   - Use locking to protect event handler in dln2"

* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
  mfd: syscon: Use a unique name with regmap_config
  mfd: Replace HTTP links with HTTPS ones
  mfd: dln2: Run event handler loop under spinlock
  mfd: madera: Improve handling of regulator unbinding
  mfd: mfd-core: Add mechanism for removal of a subset of children
  mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
  mfd: max14577: Remove redundant initialization of variable current_bits
  mfd: rn5t618: Fix caching of battery related registers
  mfd: max77693-private: Drop a duplicated word
  mfd: da9055: pdata.h: Drop a duplicated word
  mfd: rn5t618: Make restart handler atomic safe
  mfd: kempld-core: Fix 'assignment of read-only location' error
  mfd: axp20x: Allow the AXP803 to be probed by I2C
  mfd: da9063: Add support for latest DA silicon revision
  mfd: da9063: Fix revision handling to correctly select reg tables
  dt-bindings: mfd: st,stmfx: Remove I2C unit name
  dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
  mfd: motorola-cpcap: Disable interrupt for suspend
  mfd: smsc-ece1099: Remove driver
  mfd: core: Add OF_MFD_CELL_REG() helper
  ...

Merge more updates from Andrew Morton:
 "Subsystems affected by this patch series: mm/hotfixes, lz4, exec,
  mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
  virtio: pci: constify ioreadX() iomem argument (as in generic implementation)
  ntb: intel: constify ioreadX() iomem argument (as in generic implementation)
  rtl818x: constify ioreadX() iomem argument (as in generic implementation)
  iomap: constify ioreadX() iomem argument (as in generic implementation)
  sh: use generic strncpy()
  sh: clkfwk: remove r8/r16/r32
  include/asm-generic/vmlinux.lds.h: align ro_after_init
  mm: annotate a data race in page_zonenum()
  mm/swap.c: annotate data races for lru_rotate_pvecs
  mm/rmap: annotate a data race at tlb_flush_batched
  mm/mempool: fix a data race in mempool_free()
  mm/list_lru: fix a data race in list_lru_count_one
  mm/memcontrol: fix a data race in scan count
  mm/page_counter: fix various data races at memsw
  mm/swapfile: fix and annotate various data races
  mm/filemap.c: fix a data race in filemap_fault()
  mm/swap_state: mark various intentional data races
  mm/page_io: mark various intentional data races
  mm/frontswap: mark various intentional data races
  mm/kmemleak: silence KCSAN splats in checksum
  ...

The ioreadX() helpers have inconsistent interface.  On some architectures
void *__iomem address argument is a pointer to const, on some not.

Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200709072837.5869-5-krzk@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ioreadX() helpers have inconsistent interface.  On some architectures
void *__iomem address argument is a pointer to const, on some not.

Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200709072837.5869-4-krzk@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ioreadX() helpers have inconsistent interface.  On some architectures
void *__iomem address argument is a pointer to const, on some not.

Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200709072837.5869-3-krzk@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "iomap: Constify ioreadX() iomem argument", v3.

The ioread8/16/32() and others have inconsistent interface among the
architectures: some taking address as const, some not.

It seems there is nothing really stopping all of them to take pointer to
const.

This patch (of 4):

The ioreadX() and ioreadX_rep() helpers have inconsistent interface.  On
some architectures void *__iomem address argument is a pointer to const,
on some not.

Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.

[krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()]
  Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org
[akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c]
  Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.comSuggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org
Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Current SH will get below warning at strncpy()

In file included from ${LINUX}/arch/sh/include/asm/string.h:3,
                 from ${LINUX}/include/linux/string.h:20,
                 from ${LINUX}/include/linux/bitmap.h:9,
                 from ${LINUX}/include/linux/nodemask.h:95,
                 from ${LINUX}/include/linux/mmzone.h:17,
                 from ${LINUX}/include/linux/gfp.h:6,
                 from ${LINUX}/innclude/linux/slab.h:15,
                 from ${LINUX}/linux/drivers/mmc/host/vub300.c:38:
${LINUX}/drivers/mmc/host/vub300.c: In function 'new_system_port_status':
${LINUX}/arch/sh/include/asm/string_32.h:51:42: warning: array subscript\
  80 is above array bounds of 'char[26]' [-Warray-bounds]
   : "0" (__dest), "1" (__src), "r" (__src+__n)
                                     ~~~~~^~~~

In general, strncpy() should behave like below.

	char dest[10];
	char *src = "12345";

	strncpy(dest, src, 10);
	// dest = {'1', '2', '3', '4', '5',
	           '\0','\0','\0','\0','\0'}

But, current SH strnpy() has 2 issues.
1st is it will access to out-of-memory (= src + 10).
2nd is it needs big fixup for it, and maintenance __asm__
code is difficult.

To solve these issues, this patch simply uses generic strncpy()
instead of architecture specific one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://marc.info/?l=linux-renesas-soc&m=157664657013309Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SH will get below warning

${LINUX}/drivers/sh/clk/cpg.c: In function 'r8':
${LINUX}/drivers/sh/clk/cpg.c:41:17: warning: passing argument 1 of 'ioread8'
 discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
  return ioread8(addr);
                 ^~~~
In file included from ${LINUX}/arch/sh/include/asm/io.h:21,
                 from ${LINUX}/include/linux/io.h:13,
                 from ${LINUX}/drivers/sh/clk/cpg.c:14:
${LINUX}/include/asm-generic/iomap.h:29:29: note: expected 'void *' but
argument is of type 'const void *'
 extern unsigned int ioread8(void __iomem *);
                             ^~~~~~~~~~~~~~

We don't need "const" for r8/r16/r32.  And we don't need r8/r16/r32
themselvs.  This patch cleanup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
X-MARC-Message: https://marc.info/?l=linux-renesas-soc&m=157852973916903Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since the patch [1], building the kernel using a toolchain built with
binutils 2.33.1 prevents booting a sh4 system under Qemu.  Apply the patch
provided by Alan Modra [2] that fix alignment of rodata.

[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=ebd2263ba9a9124d93bbc0ece63d7e0fae89b40e
[2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.htmlSigned-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Link: https://marc.info/?l=linux-sh&m=158429470221261Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 BUG: KCSAN: data-race in page_cpupid_xchg_last / put_page

 write (marked) to 0xfffffc0d48ec1a00 of 8 bytes by task 91442 on cpu 3:
  page_cpupid_xchg_last+0x51/0x80
  page_cpupid_xchg_last at mm/mmzone.c:109 (discriminator 11)
  wp_page_reuse+0x3e/0xc0
  wp_page_reuse at mm/memory.c:2453
  do_wp_page+0x472/0x7b0
  do_wp_page at mm/memory.c:2798
  __handle_mm_fault+0xcb0/0xd00
  handle_pte_fault at mm/memory.c:4049
  (inlined by) __handle_mm_fault at mm/memory.c:4163
  handle_mm_fault+0xfc/0x2f0
  handle_mm_fault at mm/memory.c:4200
  do_page_fault+0x263/0x6f9
  do_user_addr_fault at arch/x86/mm/fault.c:1465
  (inlined by) do_page_fault at arch/x86/mm/fault.c:1539
  page_fault+0x34/0x40

 read to 0xfffffc0d48ec1a00 of 8 bytes by task 94817 on cpu 69:
  put_page+0x15a/0x1f0
  page_zonenum at include/linux/mm.h:923
  (inlined by) is_zone_device_page at include/linux/mm.h:929
  (inlined by) page_is_devmap_managed at include/linux/mm.h:948
  (inlined by) put_page at include/linux/mm.h:1023
  wp_page_copy+0x571/0x930
  wp_page_copy at mm/memory.c:2615
  do_wp_page+0x107/0x7b0
  __handle_mm_fault+0xcb0/0xd00
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x6f9
  page_fault+0x34/0x40

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 69 PID: 94817 Comm: systemd-udevd Tainted: G        W  O L 5.5.0-next-20200204+ #6
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

A page never changes its zone number. The zone number happens to be
stored in the same word as other bits which are modified, but the zone
number bits will never be modified by any other write, so it can accept
a reload of the zone bits after an intervening write and it don't need
to use READ_ONCE(). Thus, annotate this data race using
ASSERT_EXCLUSIVE_BITS() to also assert that there are no concurrent
writes to it.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/1581619089-14472-1-git-send-email-cai@lca.pwSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Read to lru_add_pvec->nr could be interrupted and then write to the same
variable.  The write has local interrupt disabled, but the plain reads
result in data races.  However, it is unlikely the compilers could do much
damage here given that lru_add_pvec->nr is a "unsigned char" and there is
an existing compiler barrier.  Thus, annotate the reads using the
data_race() macro.  The data races were reported by KCSAN,

 BUG: KCSAN: data-race in lru_add_drain_cpu / rotate_reclaimable_page

 write to 0xffff9291ebcb8a40 of 1 bytes by interrupt on cpu 23:
  rotate_reclaimable_page+0x2df/0x490
  pagevec_add at include/linux/pagevec.h:81
  (inlined by) rotate_reclaimable_page at mm/swap.c:259
  end_page_writeback+0x1b5/0x2b0
  end_swap_bio_write+0x1d0/0x280
  bio_endio+0x297/0x560
  dec_pending+0x218/0x430 [dm_mod]
  clone_endio+0xe4/0x2c0 [dm_mod]
  bio_endio+0x297/0x560
  blk_update_request+0x201/0x920
  scsi_end_request+0x6b/0x4a0
  scsi_io_completion+0xb7/0x7e0
  scsi_finish_command+0x1ed/0x2a0
  scsi_softirq_done+0x1c9/0x1d0
  blk_done_softirq+0x181/0x1d0
  __do_softirq+0xd9/0x57c
  irq_exit+0xa2/0xc0
  do_IRQ+0x8b/0x190
  ret_from_intr+0x0/0x42
  delay_tsc+0x46/0x80
  __const_udelay+0x3c/0x40
  __udelay+0x10/0x20
  kcsan_setup_watchpoint+0x202/0x3a0
  __tsan_read1+0xc2/0x100
  lru_add_drain_cpu+0xb8/0x3f0
  lru_add_drain+0x25/0x40
  shrink_active_list+0xe1/0xc80
  shrink_lruvec+0x766/0xb70
  shrink_node+0x2d6/0xca0
  do_try_to_free_pages+0x1f7/0x9a0
  try_to_free_pages+0x252/0x5b0
  __alloc_pages_slowpath+0x458/0x1290
  __alloc_pages_nodemask+0x3bb/0x450
  alloc_pages_vma+0x8a/0x2c0
  do_anonymous_page+0x16e/0x6f0
  __handle_mm_fault+0xcd5/0xd40
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x6f9
  page_fault+0x34/0x40

 read to 0xffff9291ebcb8a40 of 1 bytes by task 37761 on cpu 23:
  lru_add_drain_cpu+0xb8/0x3f0
  lru_add_drain_cpu at mm/swap.c:602
  lru_add_drain+0x25/0x40
  shrink_active_list+0xe1/0xc80
  shrink_lruvec+0x766/0xb70
  shrink_node+0x2d6/0xca0
  do_try_to_free_pages+0x1f7/0x9a0
  try_to_free_pages+0x252/0x5b0
  __alloc_pages_slowpath+0x458/0x1290
  __alloc_pages_nodemask+0x3bb/0x450
  alloc_pages_vma+0x8a/0x2c0
  do_anonymous_page+0x16e/0x6f0
  __handle_mm_fault+0xcd5/0xd40
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x6f9
  page_fault+0x34/0x40

 2 locks held by oom02/37761:
  #0: ffff9281e5928808 (&mm->mmap_sem#2){++++}, at: do_page_fault
  #1: ffffffffb3ade380 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part
 irq event stamp: 1949217
 trace_hardirqs_on_thunk+0x1a/0x1c
 __do_softirq+0x2e7/0x57c
 __do_softirq+0x34c/0x57c
 irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 23 PID: 37761 Comm: oom02 Not tainted 5.6.0-rc3-next-20200226+ #6
 Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/20200228044018.1263-1-cai@lca.pwSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm->tlb_flush_batched could be accessed concurrently as noticed by
KCSAN,

 BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one

 write to 0xffff93f754880bd0 of 1 bytes by task 822 on cpu 6:
  try_to_unmap_one+0x59a/0x1ab0
  set_tlb_ubc_flush_pending at mm/rmap.c:635
  (inlined by) try_to_unmap_one at mm/rmap.c:1538
  rmap_walk_anon+0x296/0x650
  rmap_walk+0xdf/0x100
  try_to_unmap+0x18a/0x2f0
  shrink_page_list+0xef6/0x2870
  shrink_inactive_list+0x316/0x880
  shrink_lruvec+0x8dc/0x1380
  shrink_node+0x317/0xd80
  balance_pgdat+0x652/0xd90
  kswapd+0x396/0x8d0
  kthread+0x1e0/0x200
  ret_from_fork+0x27/0x50

 read to 0xffff93f754880bd0 of 1 bytes by task 6364 on cpu 4:
  flush_tlb_batched_pending+0x29/0x90
  flush_tlb_batched_pending at mm/rmap.c:682
  change_p4d_range+0x5dd/0x1030
  change_pte_range at mm/mprotect.c:44
  (inlined by) change_pmd_range at mm/mprotect.c:212
  (inlined by) change_pud_range at mm/mprotect.c:240
  (inlined by) change_p4d_range at mm/mprotect.c:260
  change_protection+0x222/0x310
  change_prot_numa+0x3e/0x60
  task_numa_work+0x219/0x350
  task_work_run+0xed/0x140
  prepare_exit_to_usermode+0x2cc/0x2e0
  ret_from_intr+0x32/0x42

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 4 PID: 6364 Comm: mtest01 Tainted: G        W    L 5.5.0-next-20200210+ #5
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

flush_tlb_batched_pending() is under PTL but the write is not, but
mm->tlb_flush_batched is only a bool type, so the value is unlikely to be
shattered.  Thus, mark it as an intentional data race by using the data
race macro.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/1581450783-8262-1-git-send-email-cai@lca.pwSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>