- 27 Jan, 2020 18 commits
-
-
Alex Deucher authored
Has been working fine for a while. Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Dor Askayo authored
This allocation isn't required and can fail when resuming from suspend. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1009Signed-off-by:
Dor Askayo <dor.askayo@gmail.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Christian König authored
Coreboot seems to have a problem correctly setting up access to the stolen VRAM on KV/KB. Use the direct access only when necessary. Signed-off-by:
Christian König <christian.koenig@amd.com> Reported-and-tested-by:
Fredrik Bruhn <fredrik.bruhn@unibap.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Harry Wentland authored
This reverts commit 80adaebd. [WHY] This change was working around a regression that occured in this: commit 0301ccba ("drm/amd/display: DP Compliance 400.1.1 failure") With the fix to run verify_link_cap when the SINK_COUNT of dongles becomes non-zero this change is no longer needed. Cc: Louis Li <Ching-shih.Li@amd.com> Cc: Wenjing Liu <Wenjing.Liu@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Harry Wentland authored
[WHY] Two years ago the patch referenced by the Fixes tag stopped running dp_verify_link_cap_with_retries during DP detection when the reason for the detection was a short-pulse interrupt. This effectively meant that we were no longer doing the verify_link_cap training on active dongles when their SINK_COUNT changed from 0 to 1. A year ago this was partly remedied with: commit 80adaebd ("drm/amd/display: Don't skip link training for empty dongle") This made sure that we trained the dongle on initial hotplug (without connected downstream devices). This is all fine and dandy if it weren't for the fact that there are some dongles on the market that don't like link training when SINK_COUNT is 0 These dongles will in fact indicate a SINK_COUNT of 0 immediately after hotplug, even when a downstream device is connected, and then trigger a shortpulse interrupt indicating a SINK_COUNT change to 1. In order to play nicely we will need our policy to not link train an active DP dongle when SINK_COUNT is 0 but ensure we train it when the SINK_COUNT changes to 1. [HOW] Call dp_verify_link_cap_with_retries on detection even when the detection is triggered from a short pulse interrupt. With this change we can also revert this commit which we'll do in a separate follow-up change: commit 80adaebd ("drm/amd/display: Don't skip link training for empty dongle") Fixes: 0301ccba ("drm/amd/display: DP Compliance 400.1.1 failure") Suggested-by:
Louis Li <Ching-shih.Li@amd.com> Tested-by:
-
Alex Deucher authored
So don't use it. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alex Deucher authored
Switch to a blacklist so we can disable specific boards that are problematic. v2: make the blacklist non-raven specific. Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in a DRM_ERROR message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:723:2-50: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:733:3-52: WARNING: Assignment of 0/1 to bool variable drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:747:3-51: WARNING: Assignment of 0/1 to bool variable Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
Nirmoy Das authored
expand sched_list definition for better understanding. Also fix a typo atleast -> at least Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
xinhui pan authored
bo_va_list is list_head, so initialize it. Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
James Zhu authored
Use inst_idx relacing inst in SOC15_DPG_MODE macro to avoid confusion. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
James Zhu authored
Fix typo error, should be inst_idx instead of inst. Signed-off-by:
-
James Zhu authored
Fix vcn2.5 instance issue, vcn0 and vcn1 have same register offset Signed-off-by:
-
James Zhu authored
Fix a bug for the 2nd vcn instance at start and stop. v2: squash in unused label removal. Signed-off-by:
-
James Zhu authored
Share vcn_v2_0_dec_ring_test_ring to vcn2.5 to support vcn software ring. Signed-off-by:
-
Felix Kuehling authored
The flush_type was incorrectly hard-coded to 0 when calling falling back to MMIO-based invalidation in flush_gpu_tlb_pasid. Fixes: ea930000 ("drm/amdgpu: export function to flush TLB via pasid") Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Signed-off-by:
-
Felix Kuehling authored
Use a more meaningful variable name for the invalidation request that is distinct from the tmp variable that gets overwritten when acquiring the invalidation semaphore. Fixes: 4ed8a037 ("drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10") Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Signed-off-by:
-
- 22 Jan, 2020 22 commits
-
-
Wenjing Liu authored
[why] FMT has limitation to support YCbCr420 with h_active greater than 4096. [how] Use odm combine to overcome the limitation. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Lewis Huang authored
[Why] Driver didn't init hw i2c speed cause hdcp hw cannot send command, because the default value of speed register is 0x2. [How] Restore the default speed when release i2c engine Signed-off-by:
Lewis Huang <Lewis.Huang@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Isabel Zhang authored
[Why] MPO isn't enabled on some 4k videos due to video source width is 4096 and the current limit is 3840. [How] Changed the limit to 4096. Signed-off-by:
Isabel Zhang <isabel.zhang@amd.com> Reviewed-by:
-
Wenjing Liu authored
[why] MSA will be deprecated in the future. Need to support VSC during DP test automation. [how] Do not disable VSC during DP test automation. TODO - need to add VSC update on DM side on test request. Signed-off-by:
Nikola Cornij <Nikola.Cornij@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] CW2 may already be programmed when coming back from S4. In this case we want to unconditionally replace whatever DMCUB version is currently enabled with the latest. [How] Check the hw_init flag to know whether or not we've previously executed the initliazed routine. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] These logically make sense more to be set after the DMCUB has been reset rather than when we setup the inbox. [How] Move them into the reset callback. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] DMCUB command table doesn't support ATOM_ENABLE/ATOM_DISABLE anymore so we never end up calling the DCN init path in DMCUB. [How] Map ATOM_ENABLE to ATOM_INIT only for DMCUB command table offloading. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] We'll need this to perform a clean shutdown before unloading the driver. [How] It will call reset internally and set hw_init to false. It won't do anything if the hardware isn't initialized. Signed-off-by:
-
Roman Li authored
[Why] determine_update_type_for_commit() uses pointers to single instance of local variable to fill scaling/color info for all planes updates. This is a bug, that leads to incorrect update type for commit in case of multiple planes per crtc. Each plane should refer to separate scaling/color data. [How] Use arrays for plane properties. Bundle all properties into a single structure to simplify memory allocation. Signed-off-by:
Roman Li <roman.li@amd.com> Reviewed-by:
-
Brandon Syu authored
[Why] Hardcoded fixed values are not proper. [How] Use enum values instead of fixed numbers. Signed-off-by:
Brandon Syu <Brandon.Syu@amd.com> Reviewed-by:
Eric Yang <eric.yang2@amd.com> Acked-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
-
Lewis Huang authored
[Why] In HG mode, vbios didn't call DispController_Init to program NV1x XTAL_REF_DIV value when ASIC_INIT, but driver read XTAL_REF_DIV to calculate i2c reference frequency. it cause i2c frequency change from 100kHz to 200kHz. [How] remove get_speed function and calculate reference frequency at set_speed functiton. Signed-off-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Anthony Koo authored
[Why] It has duplicate code for building regamma curve [How] Remove the duplicate code and use the same function for building regamma Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
-
Jerry (Fangzhi) Zuo authored
[Why] The types for dummyinteger1 and dummyinteger2 are unsigned as part of the DML spec. They should not be long. [How] Make them unsigned int instead of long. Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] For DMCUB enabled hardware DC has a dependency on DMCUB already being running. Command table offloading will fail on first modeset if DMCUB isn't initialized first. [How] Perform DMCUB hardware initialization before DC. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
-
Haiyi Zhou authored
Switched to C-style comments for consistency Signed-off-by:
Haiyi Zhou <haiyi.zhou@amd.com> Reviewed-by:
Reza Amini <Reza.Amini@amd.com> Acked-by:
-
Paul Hsieh authored
[Why] Driver use pipe_ctx to reallocate payload may cause allocate payload twice on same sink with split pipe. [How] Drvier must to check pipe_ctx is split pipe or not to avoid reallocate payload twice on same sink. Signed-off-by:
Paul Hsieh <paul.hsieh@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] If the command table isn't available then we can fallback to DMCUB offloading if it's enabled and available. [How] Instead of assigning NULL for supported command table functions we can fallback to the DMCUB when it's available. Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] Under some hardware initialization sequences the fb base/fb offset provided can be zero or hardwareinit can happen too late. We want to ensure that we always have the correct fb_base/fb_offset when performing DMCUB hardware initialization so we can do DMCUB command table offloading during first dc hardware init. [How] Read from the DCN registers. VBIOS already filled these in for us. Signed-off-by:
-
Wenjing Liu authored
[how] Empty dsc enc caps when debug option is set to disable DSC. Signed-off-by:
-
Sung Lee authored
[Why] The DP 1.4a Spec requires that training pattern only under certain specific conditions. Currently driver will re-send training pattern every time voltage swing value changes, but that should not be the case. [How] Do not re-send training pattern every time VS values are different. Only send it on the first iteration. Signed-off-by:
Sung Lee <sung.lee@amd.com> Reviewed-by:
Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by:
-
Wenjing Liu authored
[why] On video test pattern request we need to update MSA and VSC so it will match the requested test pattern dynamic range field. [how] Update dynamic range field in MSA and disable VSC as updating VSC info packet is complicated and not required for test pattern purpose. Signed-off-by:
-
