When a dual-port VHCA sends a RoCE packet on its non-native port, and
the packet arrives to its affiliated vport FDB, a mismatch might occur
on the rules that match the packet source vport. So we replace the
match on source port with the match on metadata that was configured in
ingress ACL, and that metadata will be passed further also to the NIC
RX table of the eswitch manager.

Introduce vport metadata matching bits and enum constants as a pre-step
towards metadata matching.
    o metadata type C registers in the misc parameters 2 fields.
    o esw_uplink_ingress_acl bit in esw cap. If it set, the device supports
      ingress ACL for the uplink vport.
    o fdb_to_vport_reg_* bits in flow table cap and esw vport context, to
      support propagating the metadata to the nic rx through the loopback
      path.
    o flow_source in flow context, to indicate the known origin of packets.
    o enum constants, to support the above bits.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The lock protecting the data structure does not need to be an rwlock.  The
only read access to the lock is in an error path, and if that's limiting
your scalability, you have bigger performance problems.

Eliminate mlx5_mkey_table in favour of using the xarray directly.
reg_mr_callback must use GFP_ATOMIC for allocating XArray nodes as it may
be called in interrupt context.

This also fixes a minor bug where SRCU locking was being used on the radix
tree read side, when RCU was needed too.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add API to get the current Eswitch encap mode.
It will be used in downstream patches to check if
flow table can be created with encap support or not.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>

Devlink has UAPI declaration for encap mode, so there is no
need to be loose on the data get/set by drivers.

Update call sites to use enum devlink_eswitch_encap_mode
instead of plain u8.
Suggested-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>

Previously, EQ joined the chain notifier on creation.
This forced the caller to be ready to handle events before creating
the EQ through eq_create_generic interface.

To help the caller control when the created EQ will be attached to the
IRQ, add enable/disable API.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The patch modifies the IRQ allocation so that all async EQs are
assigned to the same IRQ resulting in more available IRQs for
completion EQs.

The changes are using the support for IRQ sharing and EQ polling budget
that was introduced in previous patches so when the shared interrupt is
triggered, the kernel will serially call the handler of each of the
sharing EQs with a certain budget of EQEs to poll in order to prevent
starvation.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

struct mlx5_irq_info is an active object and not just info.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Finalize IRQ separation and expose irq interface.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

IRQ interface should operate within the irq_table context.
It should be independent of any EQ data structure.

The interface that will be exposed:
init/clenup, create/destroy, attach/detach
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

IRQ allocation should be part of the IRQ table life-cycle.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Affinity set/clear is part of the IRQ life-cycle.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Rmap creation/deletion is part of the IRQ life-cycle.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

IRQ table should only exist for mlx5_core_dev for PF and VF only.
EQ table of mediated devices should hold a pointer to the IRQ table
of the parent PCI device.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Instead of requesting IRQ with eq creation, IRQs will be requested
before EQ table creation.
Instead of freeing the IRQs after EQ destroy, free IRQs after eq
table destroy.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Multiple EQs may share the same IRQ in subsequent patches.

Instead of calling the IRQ handler directly, the EQ will register
to an atomic chain notfier.

The Linux built-in shared IRQ is not used because it forces the caller
to disable the IRQ and clear affinity before free_irq() can be called.

This patch is the first step in the separation of IRQ and EQ logic.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Multiple EQs may share the same irq in subsequent patches.
To avoid starvation, a budget is set per EQ's interrupt handler.

Because of this change, it is no longer required to check that
MLX5_NUM_SPARE_EQE eqes were polled (to detect that arm is required).
It is guaranteed that MLX5_NUM_SPARE_EQE > budget, therefore the
handler will arm and exit the handler before all the entries in the
eq are polled.

In the scenario where the handler is out of budget and there are more
EQEs to poll, arming the EQ guarantees that the HW will send another
interrupt and the handler will be called again.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

For ECPF with eswitch manager privilege, query the host max VF count
by querying the device using query_functions command.

With this enhancement:
1. flow steering entries are created only for valid vports based on
   the max VF count of the PF.
2. Driver only queries cap of valid vport.

Eswitch requires the max VFs when doing initialization, so do sr-iov
init before eswitch init.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Current function only returns host num of VFs, later patch requires
other params such as host maximum num of VFs.

Return the raw output so that caller can extract info as needed.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Unified representors creation in esw_functions_changed context
handler. Emulate the esw_function_changed event for FW/HW that
does not support this event.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Firmware FLR happens sequentially, in some cases, like when destroying
a VM that had many VFs, may require waiting much longer than 10 seconds.
Increase the timeout to 2 minutes, and print a wait countdown status
every 20 seconds.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently for every representor type and for every single vport,
representer function pointers copy is stored even though they don't
change from one to other vport.

Additionally priv data entry for the rep is not passed during
registration, but its copied. It is used (set and cleared) by the user
of the reps.

As we want to scale vports, to simplify and also to split constants
from data,

1. Rename mlx5_eswitch_rep_if to mlx5_eswitch_rep_ops as to match _ops
prefix with other standard netdev, ibdev ops.
2. Constify the IB and Ethernet rep ops structure.
3. Instead of storing copy of all rep function pointers, store copy
per eswitch rep type.
4. Split data and function pointers to mlx5_eswitch_rep_ops and
mlx5_eswitch_rep_data.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Avoid typecasting from void* to mlx5_ib_dev* or mlx5e_rep_priv*
as it is not needed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Whenever device supports eswitch functions changed event, honor
such device setting. Do not limit it to ECPF.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

To support sriov on a E-Switch manager, num_vfs are queried
to the firmware whenever E-Switch manager is notified by
esw_functions_changed event.

Replace host_params event with esw_functions_changed event that reflects
more appropriate naming.

While at it, also correct num_vfs type from int to u16 as expected by
the function mlx5_esw_query_functions().
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Termination table is a flow table with a termination flag. The flag
allows the firmware to assume that the the specified actions are the last
actions list. This assumption allows the FW to safely perform potential
looping logic (e.g. hairpin). Introduce the bits for this attribute.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add Firmware core dump registers and HW definitions.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The error handling was a bit flipped around.  If the mlx5_create_flow_group()
function failed then it would have resulted in dereferencing "fg" when
it was an error pointer.

Fixes: 80f09dfc ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Pull UBIFS fixes from Richard Weinberger:

 - build errors wrt xattrs

 - mismerge which lead to a wrong Kconfig ifdef

 - missing endianness conversion

* tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Convert xattr inum to host order
  ubifs: Use correct config name for encryption
  ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR

Merge yet more updates from Andrew Morton:
 "A few final bits:

   - large changes to vmalloc, yielding large performance benefits

   - tweak the console-flush-on-panic code

   - a few fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  panic: add an option to replay all the printk message in buffer
  initramfs: don't free a non-existent initrd
  fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
  mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
  mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
  mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
  mm/vmalloc.c: keep track of free blocks for vmap allocation

Pull more Kbuild updates from Masahiro Yamada:

 - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption

 - exclude tracked files from .gitignore

 - re-enable -Wint-in-bool-context warning

 - refactor samples/Makefile

 - stop building immediately if syncconfig fails

 - do not sprinkle error messages when $(CC) does not exist

 - move arch/alpha/defconfig to the configs subdirectory

 - remove crappy header search path manipulation

 - add comment lines to .config to clarify the end of menu blocks

 - check uniqueness of module names (adding new warnings intentionally)

* tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
  kconfig: use 'else ifneq' for Makefile to improve readability
  kbuild: check uniqueness of module names
  kconfig: Terminate menu blocks with a comment in the generated config
  kbuild: add LICENSES to KBUILD_ALLDIRS
  kbuild: remove 'addtree' and 'flags' magic for header search paths
  treewide: prefix header search paths with $(srctree)/
  media: prefix header search paths with $(srctree)/
  media: remove unneeded header search paths
  alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig
  kbuild: terminate Kconfig when $(CC) or $(LD) is missing
  kbuild: turn auto.conf.cmd into a mandatory include file
  .gitignore: exclude .get_maintainer.ignore and .gitattributes
  kbuild: add all Clang-specific flags unconditionally
  kbuild: Don't try to add '-fcatch-undefined-behavior' flag
  kbuild: add some extra warning flags unconditionally
  kbuild: add -Wvla flag unconditionally
  arch: remove dangling asm-generic wrappers
  samples: guard sub-directories with CONFIG options
  kbuild: re-enable int-in-bool-context warning
  MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux*
  ...

Pull i2c updates from Wolfram Sang:
 "Some I2C core API additions which are kind of simple but enhance error
  checking for users a lot, especially by returning errno now.

  There are wrappers to still support the old API but it will be removed
  once all users are converted"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: add device-managed version of i2c_new_dummy
  i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy

Pull ext4 fixes from Ted Ts'o:
 "Some bug fixes, and an update to the URL's for the final version of
  Unicode 12.1.0"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid panic during forced reboot due to aborted journal
  ext4: fix block validity checks for journal inodes using indirect blocks
  unicode: update to Unicode 12.1.0 final
  unicode: add missing check for an error return from utf8lookup()
  ext4: fix miscellaneous sparse warnings
  ext4: unsigned int compared against zero
  ext4: fix use-after-free in dx_release()
  ext4: fix data corruption caused by overlapping unaligned and aligned IO
  jbd2: fix potential double free
  ext4: zero out the unused memory region in the extent tree block

Pull cifs fixes from Steve French:
 "Minor cleanup and fixes, one for stable, four rdma (smbdirect)
  related. Also adds SEEK_HOLE support"

* tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add support for SEEK_DATA and SEEK_HOLE
  Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file
  cifs: Allocate memory for all iovs in smb2_ioctl
  cifs: Don't match port on SMBDirect transport
  cifs:smbd Use the correct DMA direction when sending data
  cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called
  cifs: use the right include for signal_pending()
  smb3: trivial cleanup to smb2ops.c
  cifs: cleanup smb2ops.c and normalize strings
  smb3: display session id in debug data

Pull perf tooling updates from Ingo Molnar:
 "perf.data:

   - Streaming compression of perf ring buffer into
     PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x
     perf.data file size reduction on variety of tested workloads what
     saves storage space on larger server systems where perf.data size
     can easily reach several tens or even hundreds of GiBs, especially
     when profiling with DWARF-based stacks and tracing of context
     switches.

  perf record:

   - Improve -user-regs/intr-regs suggestions to overcome errors

  perf annotate:

   - Remove hist__account_cycles() from callback, speeding up branch
     processing (perf record -b)

  perf stat:

   - Add a 'percore' event qualifier, e.g.: -e
     cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for
     both hardware threads in a core.

     We can already do this with --per-core, but it's often useful to do
     this together with other metrics that are collected per hardware
     thread.

     I.e. now its possible to do this per-event, and have it mixed with
     other events not aggregated by core.

  arm64:

   - Map Brahma-B53 CPUID to cortex-a53 events.

   - Add Cortex-A57 and Cortex-A72 events.

  csky:

   - Add DWARF register mappings for libdw, allowing --call-graph=dwarf
     to work on the C-SKY arch.

  x86:

   - Add support for recording and printing XMM registers, available,
     for instance, on Icelake.

   - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON
     support. UPI replaced the Intel QuickPath Interconnect (QPI) in
     Xeon Skylake-SP.

  Intel PT:

   - Fix instructions sampling rate.

   - Timestamp fixes.

   - Improve exported-sql-viewer GUI, allowing, for instance, to
     copy'n'paste the trees, useful for e-mailing"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  perf stat: Support 'percore' event qualifier
  perf stat: Factor out aggregate counts printing
  perf tools: Add a 'percore' event qualifier
  perf docs: Add description for stderr
  perf intel-pt: Fix sample timestamp wrt non-taken branches
  perf intel-pt: Fix improved sample timestamp
  perf intel-pt: Fix instructions sampling rate
  perf regs x86: Add X86 specific arch__intr_reg_mask()
  perf parse-regs: Add generic support for arch__intr/user_reg_mask()
  perf parse-regs: Split parse_regs
  perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events
  perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events
  perf vendor events arm64: Remove [[:xdigit:]] wildcard
  perf jevents: Remove unused variable
  perf test zstd: Fixup verbose mode output
  perf tests: Implement Zstd comp/decomp integration test
  perf inject: Enable COMPRESSED record decompression
  perf report: Implement perf.data record decompression
  perf record: Implement -z,--compression_level[=<n>] option
  perf report: Add stub processing of compressed events for -D
  ...

Pull clocksource updates from Ingo Molnar:
 "Misc clocksource/clockevent driver updates that came in a bit late but
  are ready for v5.2"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  misc: atmel_tclib: Do not probe already used TCBs
  clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static
  clocksource/drivers/tcb_clksrc: Rename the file for consistency
  clocksource/drivers/timer-atmel-pit: Rework Kconfig option
  clocksource/drivers/tcb_clksrc: Move Kconfig option
  ARM: at91: Implement clocksource selection
  clocksource/drivers/tcb_clksrc: Use tcb as sched_clock
  clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib
  ARM: at91: move SoC specific definitions to SoC folder
  clocksource/drivers/timer-milbeaut: Cleanup common register accesses
  clocksource/drivers/timer-milbeaut: Add shutdown function
  clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer
  clocksource/drivers/tegra: Rework for compensation of suspend time
  clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804
  clocksource/drivers/sun4i: Add a compatible for suniv
  dt-bindings: timer: Add Allwinner suniv timer

Pull IRQ chip updates from Ingo Molnar:
 "A late irqchips update:

   - New TI INTR/INTA set of drivers

   - Rewrite of the stm32mp1-exti driver as a platform driver

   - Update the IOMMU MSI mapping API to be RT friendly

   - A number of cleanups and other low impact fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
  irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
  irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
  irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
  irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
  iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
  genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
  arm64: arch_k3: Enable interrupt controller drivers
  irqchip/ti-sci-inta: Add msi domain support
  soc: ti: Add MSI domain bus support for Interrupt Aggregator
  irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
  dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
  irqchip/ti-sci-intr: Add support for Interrupt Router driver
  dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
  gpio: thunderx: Use the default parent apis for {request,release}_resources
  genirq: Introduce irq_chip_{request,release}_resource_parent() apis
  firmware: ti_sci: Add helper apis to manage resources
  firmware: ti_sci: Add RM mapping table for am654
  firmware: ti_sci: Add support for IRQ management
  firmware: ti_sci: Add support for RM core ops
  ...

Pull EFI fix from Ingo Molnar:
 "Fix an EFI-fb regression that affects certain x86 systems"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types

Pull core fixes from Ingo Molnar:
 "This fixes a particularly thorny munmap() bug with MPX, plus fixes a
  host build environment assumption in objtool"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Allow AR to be overridden with HOSTAR
  x86/mpx, mm/core: Fix recursive munmap() corruption

Pull ARM SoC late updates from Olof Johansson:
 "This is some material that we picked up into our tree late. Most of it
  are smaller fixes and additions, some defconfig updates due to recent
  development, etc.

  Code-wise the largest portion is a series of PM updates for the at91
  platform, and those have been in linux-next a while through the at91
  tree before we picked them up"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: dts: sprd: Add clock properties for serial devices
  Opt out of scripts/get_maintainer.pl
  ARM: ixp4xx: Remove duplicated include from common.c
  soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe
  arm64: tegra: Disable XUSB support on Jetson TX2
  arm64: tegra: Enable SMMU translation for PCI on Tegra186
  arm64: tegra: Fix insecure SMMU users for Tegra186
  arm64: tegra: Select ARM_GIC_PM
  amba: tegra-ahb: Mark PM functions as __maybe_unused
  ARM: dts: logicpd-som-lv: Fix MMC1 card detect
  ARM: mvebu: drop return from void function
  ARM: mvebu: prefix coprocessor operand with p
  ARM: mvebu: drop unnecessary label
  ARM: mvebu: fix a leaked reference by adding missing of_node_put
  ARM: socfpga_defconfig: enable LTC2497
  ARM: mvebu: kirkwood: remove error message when retrieving mac address
  ARM: at91: sama5: make ov2640 as a module
  ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
  ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
  soc/fsl/qe: Fix an error code in qe_pin_request()
  ...