- 13 Dec, 2018 18 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/b43/phy_n.c: In function 'b43_nphy_op_recalc_txpower': drivers/net/wireless/broadcom/b43/phy_n.c:5898:7: warning: variable 'tx_pwr_state' set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/b43/phy_n.c:6047:20: warning: variable 'tmp2' set but not used [-Wunused-but-set-variable] 'tx_pwr_state' never used since introduction in commit 8615eb28 ("b43: N-PHY: support setting custom TX power") 'tmp2' not used any more since commit c002831a ("b43: N-PHY: use helper for checking IPA") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
When CONFIG_NO_AUTO_INLINE is set, we get a false-postive warning for the brcmf_fw_request_nvram_done() function, after gcc figures out that brcmf_fw_nvram_from_efi() might not set the 'data_len' variable, but fails to notice that it always returns NULL: drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c: In function 'brcmf_fw_request_nvram_done': drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c:560:11: error: 'data_len' may be used uninitialized in this function [-Werror=maybe-uninitialized] Mark it 'inline' to force gcc to understand this. Fixes: ce2e6db5 ("brcmfmac: Add support for getting nvram contents from EFI variables") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Wright Feng authored
AOS is a part of the SDIOD core that becomes active when the rest of SDIOD is sleeping to keep SDIO bus alive responding to reduced set of commands. Transaction between AOS and SDIOD is not protected, and if cmd 52 is received in AOS and in the middle of response state changed from AOS to SDIOD, response is corrupted and it causes to SDIO Host controller to hang. Command decode for below chips are disabled in this commit: - 4339 - 4345 - 4354 - 4373 Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Wright Feng <wright.feng@cypress.com> Signed-off-by:
Double Lo <double.lo@cypress.com> Signed-off-by:
Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by:
Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by:
-
Chi-Hsien Lin authored
Use chipcommon sr_control0 register to check 4373 sr support. Reviewed-by:
-
Naveen Gupta authored
The number of words that the read FIFO has to contain except the end of frame before sends data back to the host. Max watermark = (512B - 2* (BurstLength))/4 = (512 - 128)/4 = 384/4 = 0x60 so if burst length (i.e. BurstLength = 64) is increased, watermark has to be reduced. This is the optimal setting for this chip. Reviewed-by:
Naveen Gupta <naveen.gupta@cypress.com> Signed-off-by:
-
Chi-Hsien Lin authored
GCI core is needed for ULP operation. Allow GCI core enumuration with below changes: - Allow GCI to be added to core list even when it doesn't have a wrapper. - Allow 8K address space size. - Don't overwrite the address value when an additional size descriptor is in place. Reviewed-by:
-
Chi-Hsien Lin authored
CYW43012 is a 1x1 802.11a/b/g/n Dual-Band HT20, 256-QAM/Turbo QAM. It is an Ultra Low Power WLAN+BT combo chip. Reviewed-by:
Praveen Babu C <praveen.chandran@cypress.com> Signed-off-by:
-
Madhan Mohan R authored
Along with F2 watermark (existing) configuration, F1 MesBusyCtrl should be enabled & sdio device RX FIFO watermark should be configured to avoid overflow errors. Reviewed-by:
-
Wright Feng authored
We got SDIO_CRC_ERROR with 4373 on SDR104 when doing bi-directional throughput test. Enable watermark to 256 to guarantee the operation stability. Reviewed-by:
-
Winnie Chang authored
Add the raw 4354 PCIe device ID for unprogrammed Cypress boards. Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Signed-off-by:
Winnie Chang <winnie.chang@cypress.com> Signed-off-by:
-
Chung-Hsien Hsu authored
Firmware inform the driver about tx status by normal tx status signal or compressed tx status signal. This patch adds support to handle the compressed tx status signal. Signed-off-by:
Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by:
-
Wright Feng authored
The frameburst feature can enable per-packet framebursting in firmware side and get higher TX throughput in High Throughput(HT) mode. To enhance TX throughput, we enable frameburst mode in default firmware setting. Signed-off-by:
-
Wright Feng authored
The credit numbers are static and tunable per chip in firmware side. However the credit number may be changed that is based on packet pool length and will send BRCMF_E_FIFO_CREDIT_MAP event to notify host driver updates the credit numbers during interface up. The purpose of this patch is making host driver has ability of updating the credit numbers when receiving the BRCMF_E_FIFO_CREDIT_MAP event. Signed-off-by:
-
Brian Norris authored
Comparing the existing TX_BITRATE parsing code (in mwifiex_parse_htinfo()) with the RX bitrate histograms in debugfs.c, it appears that the rxpd_rate and rxpd_htinfo fields have the same format. At least, they give reasonable results when I parse them this way. So this patch adds support for RX_BITRATE to our station info dump. Along the way, I add legacy bitrate parsing into the same function, using the debugfs code (mwifiex_histogram_read() and mwifiex_adjust_data_rate()) as reference. Additionally, to satisfy the requirements of NL80211_STA_INFO_RX_BITRATE, I skip logging the bitrate of multicast packets. This shouldn't add a lot of overhead to the RX path, as there are already several similar 802.3 header checks in this same codepath. We can also bias the branch behavior to favor unicast, as that's the common performance-sensitive case. I'd consider this support somewhat experimental, as I have zero documentation from Marvell. But the existing driver code gives me good reason to think this is correct. I've tested this on a few different 802.11{a,b,g,n,ac} networks, and the reported bitrates look good to me. Signed-off-by:Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Brian Norris authored
This function converts some firmware-specific parameters into cfg80211 'rate_info' structures. It currently assumes it's dealing only with TX bitrate, but the RX bitrate looks to be the same, so refactor this function to be reusable. Signed-off-by:
-
Brian Norris authored
Currently, snippets of this file look like: rx rates (in Mbps): 0=1M 1=2M2=5.5M 3=11M 4=6M 5=9M 6=12M 7=18M 8=24M 9=36M 10=48M 11=54M12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40) 44-53=MCS0-9(VHT:BW20)54-63=MCS0-9(VHT:BW40)64-73=MCS0-9(VHT:BW80) ... noise_flr[--96dBm] = 22 noise_flr[--95dBm] = 149 noise_flr[--94dBm] = 9 noise_flr[--93dBm] = 2 We're missing some spaces, and we're adding a minus sign ('-') on values that are already negative signed integers. Signed-off-by: -
Pan Bian authored
There are two defects: (1) passing a NULL bss to mwifiex_save_hidden_ssid_channels will result in NULL dereference, (2) using bss after dropping the reference to it via cfg80211_put_bss. To fix them, the patch moves the buggy code to the branch that bss is not NULL and puts it before cfg80211_put_bss. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
https://github.com/nbd168/wirelessKalle Valo authored
first batch of mt76 patches for 4.21 * use the same firmware for mt76x2e and mt76x2u * mt76x2 fixes * mt76x0 fixes * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 kvalo: fixed a conflict in drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c and a build problem in drivers/net/wireless/mediatek/mt76/mt76x02_util.c
-
- 04 Dec, 2018 22 commits
-
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4_core cleanups This patchset by Erez contains cleanups to the mlx4_core driver. Patch 1 replaces -EINVAL with -EOPNOTSUPP for unsupported operations. Patch 2 fixes some coding style issues. Series generated against net-next commit: 97e6c858 net: usb: aqc111: Initialize wol_cfg with memset in aqc111_suspend ==================== Signed-off-by:
-
Erez Alfasi authored
Fix 3 checkpatch errors within mlx4/main.c: - Unnecessary mlx4_debug_level global variable initialization to 0. - Prohibited space before comma. - Whitespaces instead of tab. Signed-off-by:
Erez Alfasi <ereza@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Erez Alfasi authored
Functions __set_port_type and mlx4_check_port_params returned -EINVAL while the proper return code is -EOPNOTSUPP as a result of an unsupported operation. All drivers should generate this and all users should check for it when detecting an unsupported functionality. Signed-off-by:
-
Jose Abreu authored
Logic of phy_device_create() requests PHY modules according to PHY ID but for C45 PHYs we use different field for the IDs. Let's also request the modules for these IDs. Changes from v1: - Only request C22 modules if C45 are not present (Andrew) Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Joao Pinto <joao.pinto@synopsys.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Jerin Jacob says: ==================== octeontx2-af: NIX and NPC enhancements This patchset is a continuation to earlier submitted four patch series to add a new driver for Marvell's OcteonTX2 SOC's Resource virtualization unit (RVU) admin function driver. 1. octeontx2-af: Add RVU Admin Function driver https://www.spinics.net/lists/netdev/msg528272.html 2. octeontx2-af: NPA and NIX blocks initialization https://www.spinics.net/lists/netdev/msg529163.html 3. octeontx2-af: NPC parser and NIX blocks initialization https://www.spinics.net/lists/netdev/msg530252.html 4. octeontx2-af: NPC MCAM support and FLR handling https://www.spinics.net/lists/netdev/msg534392.html This patch series adds support for below NPC block: - Add NPC(mkex) profile support for various Key extraction configurations NIX block: - Enable dynamic RSS flow key algorithm configuration - Enhancements on Rx checksum and error checks - Add support for Tx packet marking support - TL1 schedule queue allocation enhancements - Add LSO format configuration mbox - VLAN TPID configuration - Skip multicast entry init for broadcast tables v2: - Rename FLOW_* to NIX_FLOW_* to avoid serious global namespace collisions, as we have various FLOW_* definitions coming from include/uapi/linux/pkt_cls.h for example.(David Miller) - Pack the arguments of rvu_get_tl1_schqs() function as 80 columns allows.(David Miller) ==================== Signed-off-by:
-
Vamsi Attunuru authored
The following set of NPC registers allow the driver to configure NPC to generate different key value schemes to compare against packet payload in MCAM search. NPC_AF_INTF(0..1)_KEX_CFG NPC_AF_KEX_LDATA(0..1)_FLAGS_CFG NPC_AF_INTF(0..1)_LID(0..7)_LT(0..15)_LD(0..1)_CFG NPC_AF_INTF(0..1)_LDATA(0..1)_FLAGS(0..15)_CFG Currently, the AF driver populates these registers to configure the default values to address the most common use cases such as key generation for channel number + DMAC. The secure firmware stores different configuration value of these registers to enable different NPC use case along with the name for the lookup. Patch loads profile binary from secure firmware over the exiting CGX mailbox interface and apply the profile. AF driver shall fall back to the default configuration in case of any errors. The AF consumer driver can know the selected profile on response to NPC_GET_KEX_CFG mailbox by introducing mkex_pfl_name in the struct npc_get_kex_cfg_rsp. Signed-off-by:
Vamsi Attunuru <vamsi.attunuru@marvell.com> Signed-off-by:
Jerin Jacob <jerinj@marvell.com> Signed-off-by:
-
Nithin Dabilpuram authored
NIX_AF_LSO_FORMAT(0..31)_FIELD(0..7) register enables an SW defined means to define LSO packet modification formats. 0..31 works as an index to choose the algorithm, On success, the mailbox returns the index to the client of chosen LSO algorithm selection. This index will be used in configuring the transmit descriptors. Add mailbox interface to dynamically reserve and configure LSO format. This commit also fixes 'sizem1' for NIX_LSOALG_TCP_FLAGS to '1' i.e 2 Bytes. Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
Vidhya Raman authored
Adds mailbox support for L4 checksum verification and L3 and L4 length verification configuration. Signed-off-by:
Vidhya Raman <vraman@marvell.com> Signed-off-by:
-
Nithin Dabilpuram authored
Setup TPID's for vlan0 and vlan1 for Tx VLAN insertion offloads. Signed-off-by:
-
Krzysztof Kanas authored
NIX_AF_MARK_FORMAT(0..127)_CTL register enables an SW defined means to mark/insert various data in the packet based on final packet color from traffic shaping HW. 0..127 works as an index to choose the algorithm. On success, the mailbox returns the index to the client. Add NIX_MARK_FORMAT_CFG mailbox which reserves mark format based on tuple (offset, y_mask, y_val, r_mask, r_val) If the tuple is requested again for mark format that was already reserved, then it will be reused. If not it will reserve a new entry if space is available. Also on AF init commonly used marker format such as VLAN DEI, IPv4 ECN, IPv4 DSCP are reserved for AF consumers. Signed-off-by:
Krzysztof Kanas <kkanas@marvell.com> Signed-off-by:
-
Vamsi Attunuru authored
This patch adds support for enabling RSS in promiscuous mode if RSS is already requested by the AF client. Signed-off-by:
-
Jerin Jacob authored
In order to support all NIX specific valid length errors and checksum errors on Rx, Update all NIX_AF_RX_DEF_* registers. Also sorted all registers in HRM definition order. Signed-off-by:
-
Jerin Jacob authored
This patch enables the inner IPv4 checksum and defines the error code for Rx inner and outer checksum errors. Setting ERRCODE as 1 so that CQE descriptor can be embedded valid checksum error code and the driver can interpret checksum error as ERRLEV = LID + 1 and ERRCODE = 1. Signed-off-by:
-
Nithin Dabilpuram authored
The default behavior was to free all the TLx Tx schedule queues. This patch adds support for freeing a single Tx schedule queue if TXSCHQ_FREE_ALL flag is not set. Signed-off-by:
-
Nithin Dabilpuram authored
TL1 is the root node in the scheduling hierarchy and it is a global resource with a limited number. This patch introduces restriction and validation on the allocation of the TL1 nodes for the effective resource sharing across the AF consumers. - Limit TL1 allocation to 2 per lmac. One could be for the normal link and one for IEEE802.3br express link (Express Send DMA). Effectively all the VF's of an RVU PF(lmac) share the two TL1 schqs. - TL1 cannot be freed once allocated. - Allow VF's to only apply default config to TL1 if not already applied. PF's can always overwrite the TL1 config. - Consider NIX_AQ_INSTOP_WRITE while validating txschq when sq.ena is set. Signed-off-by:
-
Jerin Jacob authored
Introduced reserve_flowkey_alg_idx()to reserve RSS algorithm index, it would internally use set_flowkey_fields() to generate fields based on the flow key dynamically. On AF driver init, it would reserve a predefined set RSS algo indexes, which will be available all the time for all the AF driver consumers. The leftover algo indexes can be reserved at runtime through exiting nix_rss_flowkey_cfg mailbox message. The NIX_FLOW_KEY_TYPE_PORT is removed from predefined a set of RSS flow type as it is not used by any consumer. Signed-off-by:
-
Jerin Jacob authored
Introduce state-based algorithm to convert the flow_key value to RSS algo field used by NIX_AF_RX_FLOW_KEY_ALGX_FIELDX register. The outer `for loop` goes over _all_ protocol field and the following variables depict the state machine forward progress logic. a) keyoff_marker - Enabled when hash byte length needs to be accounted in field->key_offset update. b) field_marker - Enabled when a new field needs to be selected. c) group_member - Enabled when a protocol is part of a group. This would remove the existing hard coding and enable to add new protocol support seamlessly. Signed-off-by:
-
Jerin Jacob authored
Added response for nix_rss_flowkey_cfg message to return selected RSS algorithm index. The FLOW_KEY_TYPE* definition is part of the mbox message and it will be used by the other consumers of AF driver hence moving to mbox.h. Also renamed FLOW_* definitions to NIX_FLOW_* to avoid global name space collisions, as we have various coming from include/uapi/linux/pkt_cls.h for example. Signed-off-by:
-
